Cygwin test failed when installing Cloud Control

When installing Cloud Control OEM12 on Windwos, I need to set up Cygwin first. After setting up Cygwin on the two hosts (chdevora03 and chdevora05), I issued the following to test 'ssh' connection between them but got 'permission denied'. What could be wrong?
$ ssh -l surrey\srvc_oracleadm chdevora03.surrey.ca 'date'
[email protected]'s password:
Permission denied, please try again.

$ ssh -v srvc_oracleadm@chdevora03 'date'
OpenSSH_6.1p1, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to chdevora03 [172.16.2.249] port 22.
debug1: Connection established.
debug1: identity file /home/sryadoraz/.ssh/id_rsa type -1
debug1: identity file /home/sryadoraz/.ssh/id_rsa-cert type -1
debug1: identity file /home/sryadoraz/.ssh/id_dsa type -1
debug1: identity file /home/sryadoraz/.ssh/id_dsa-cert type -1
debug1: identity file /home/sryadoraz/.ssh/id_ecdsa type -1
debug1: identity file /home/sryadoraz/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ECDSA 67:ae:3c:f6:b4:7b:f6:e1:8e:6b:30:66:ea:51:ed:93
debug1: Host 'chdevora03' is known and matches the ECDSA host key.
debug1: Found key in /home/sryadoraz/.ssh/known_hosts:1
debug1: ssh_ecdsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,password,keyboard-interacti
ve
debug1: Next authentication method: publickey
debug1: Trying private key: /home/sryadoraz/.ssh/id_rsa
debug1: Trying private key: /home/sryadoraz/.ssh/id_dsa
debug1: Trying private key: /home/sryadoraz/.ssh/id_ecdsa
debug1: Next authentication method: keyboard-interactive
debug1: Authentications that can continue: publickey,password,keyboard-interacti
ve
debug1: Next authentication method: password
srvc_oracleadm@chdevora03's password:
debug1: Authentications that can continue: publickey,password,keyboard-interacti
ve
Permission denied, please try again.
srvc_oracleadm@chdevora03's password:

Similar Messages

  • Getting ld error when installing Cloud control 12.1.0.4

    INFO: 4/26/15 11:46:46 PM PDT: /usr/bin/ld: cannot find -lclntsh
    collect2: error: ld returned 1 exit status
    INFO: 4/26/15 11:46:46 PM PDT: make[1]: *** [/home/oracle/Middleware/oms/sqlplus/bin/sqlplus32] Error 1
    make: *** [newsqlplus32] Error 2
    INFO: 4/26/15 11:46:46 PM PDT: End output from spawned process.
    INFO: 4/26/15 11:46:46 PM PDT: ----------------------------------
    INFO: 4/26/15 11:46:46 PM PDT: Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target 'install' of makefile '/home/oracle/Middleware/oms/sqlplus/lib/ins_sqlplus.mk'. See '/u01/app/oraInventory/logs/installActions2015-04-26_11-00-52-PM.log' for details.
    Exception Severity: 1
    INFO: 4/26/15 11:46:46 PM PDT: POPUP WARNING:Error in invoking target 'install' of makefile '/home/oracle/Middleware/oms/sqlplus/lib/ins_sqlplus.mk'. See '/u01/app/oraInventory/logs/installActions2015-04-26_11-00-52-PM.log' for details.
    version:
    Linux localhost.localdomain 3.8.13-55.1.6.el7uek.x86_64 #2 SMP Wed Feb 11 14:18:22 PST 2015 x86_64 x86_64 x86_64 GNU/Linux
    I installed all packages...
    wonder if anything missing...?
    thanks

    Hi ,
    The error typically comes if there is a missing OS package. In most cases its the 32 bit version of glibc* package
    First establish a sorted list of installed rpm's :
    rpm -qa --queryformat "%{NAME}-%{VERSION}-%{RELEASE} (%{ARCH})\n" | sort >/tmp/rpmlist.out
    Then compare the content of the file rpmlist.out  with the pre-requisites provided in the OTN documentationand ensure that all packages including the required 32 bit OS packages are installed on the OS:
    Ref
    Install the missing rpms then then re-try installation.
    http://docs.oracle.com/cd/E24628_01/install.121/e22624/preinstall_req_packages.htm#CHDGGGDH
    Also ensure none of the other ORACLE related env varibles are set
    example
    NLS_LANG
    LD_LIBRARY_PATH
    ORA_NLS10
    TNS_ADMIN
    PATH
    CLASSPATH
    ORACLE_HOME
    Regards,
    Rahul

  • Install Cloud Control 12c High Availability

    Good day,
    I am installing cloud control high availibility, but when i install the Third Party Certificate the services are not available when I check for HTTP.
    I followed the following guidelines:
    Deploying a Highly Available Enterprise Manager 12c Cloud Control:
    http://www.oracle.com/technetwork/oem/framework-infra/wp-em12c-building-ha-level3-1631423.pdf
    And configuration Third Party Certificate, note:
    NOTE:1399293.1 - EM 12c Cloud Control How to Create a Wallet With Third Party Trusted Certificate that Can Be Imported into the OMS For SSL Comunication?
    I have a couple of questions
    How i can to change the CA in OMS?
    How export the certificate and key?
    Can anyone help me, please,
    Best Regards,
    Alexandra Granados

    hi,
    Please follow the below procedure..
    EM11g / EM12c : Using ORAPKI Utility to Create a Wallet with Third Party Trusted Certificate and Import into OMS [ID 1367988.1]

  • When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

    When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

    Hi Willy,
    Welcome to Apple Support Communities.
    The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
    Resolve iOS update and restore errors
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    I hope this helps,
    -Jason

  • Illustrator CS6 says "installation failed" when installing.

    Illustrator CS6 says "installation failed" when installing. No explanation is given. I don't have any previous versions of AI installed or any trials. Help? I really need to use this product today!

    We can't know. You need to provide system information and possibly the install logs:
    Troubleshoot with install logs
    Mylenium

  • Install of Elements trial fails when installing Shared Technologies

    Have tried installing the Elements 10 trial on both an XP Pro and a Win7 Pro PC and have the same problem.
    Install of trial fails when installing Shared Technologies and then rolls back the install of the Elements Organiser.
    Anyone seen this before?   Any ideas?

    Can you please make your question a seperate thread?
    It would be helpful if you could please provide us the install log for it. Install logs can be found at C:\Program Files(x86)\Common Files\Adobe\Installers\ with name Elements STI Installer 1.0 <date>.log.gz
    Use a decompression utility such as Winzip to uncompress the .gz file. Once uncompressed, you will have a new file without the .gz extension. The filename could now be something like "Elemens STI Installer 1.0 11-21-2012.log."
    Open the .log file using notepad
    Copy the whole log and paste it here.
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_

  • WRT54G ver 6, MTU test fails when trying to connect to Xbox360 live

    MTU test fails when trying to connect wirelessly to Xbox360 live.  Firmware is current.   I have a WRT54G version #6, Motorola Surfboard SB5101 Cable Modem, running AOL HighSpeed Broadband through Time Warner Cable.  Changing the MTU setting does not work.  I have tried several other suggestions found on these boards but nothing seems to work.  Any help would be greatly appreciated!

    hi twhale.... If you had already tried the settings i posted ... in such case you can do one thing .... access router setup page ... under Security ... uncheck block wan request ... click save settings .... Under Applications & Gaming tab ... click port range forwarding .... forward ports 88 & 3074 for the static Ip of the X-BOX ... click save settings . Click save settings ... check X-BOX live test ... if still shows the same error ... upgrade/reflash the firmware ...

  • LR 5 installation failed when installing from cloud

    Error message:
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example,  ERROR: DW006 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ----------- Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

    Hi dsharpechevychase,
    Please refer the kb: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html .
    Regards,
    Romit Sinha

  • Installing Cloud Control 12c agent on other blades thru RPM and response file sets wrong cluster name

    Hi,
    Hopefully someone can help me with this. We installed em Cloud Control 12c and its agents on miscellaneous machines.
    We first proceeded with two target-nodes part of a Grid Infra cluster (let's call it proclu_1). OS is RH6.
    Then, using the same method (1/ yum -y install /tmp/oracle-agt-12.1.0.3.0-1.0.x86_64.rpm and then
    2/ /etc/init.d/oracle-agt RESPONSE_FILE=/usr/lib/oracle/agent/agent.properties) we installed the agent on 2 other
    blades that are part of another cluster (proclu_2). The agent.properties file above just contained the usual key-value lines:
    OMS_HOST=omsmachine.stuff.be
    OMS_PORT=4889
    AGENT_REGISTRATION_PASSWORD=ametemp
    AGENT_USERNAME=oracle
    AGENT_GROUP=oinstall
    AGENT_PORT=3873
    ORACLE_HOSTNAME=promachine.stuff.be
    Now if I change dir to /usr/lib/oracle/agent and search for the name "proclu*" from there, I find the name of the
    first install (on first cluster proclu_1):
    [oracle@bladb0406 agent]$ pwd
    /usr/lib/oracle
    [oracle@bladb0406 oracle]$ find . -name "proclu_1*"
    ./agent/agent_inst/sysman/emd/state/has/proclu2/cluster/proclu
    ./agent/agent_inst/sysman/emd/state/configstate/cluster/proclu_1
    ./agent/agent_inst/sysman/emd/state/statemgmt/cluster/proclu_1
    ./agent/agent_inst/sysman/log/targets/cluster/proclu_1
    My questions:
    1/ on the first two nodes (blada0204 & blada0406) of our first cluster doing this 'find' returns the
    same directory names with "proclu_1", this is what we expected: where did the oracle-agt script pick up
    our cluster name ?
    2/ why has it set the same -and wrong- "proclu_1" name on our two other nodes (bladb0204 & bladb0406) ??
    (we would've expected "proclu_2"...)
    Is there a way to correct this, or should I reinstall the agent (after configuring/modifying something somewhere
    so that it picks up the correct cluster name...) ??
    Thanks a lot.
    Regards,
    Seb

    Unfortunately, this goes back to the RAC install procedures.   Check the cluster name for each cluster.   If they're all installed the same, then you'll need to manually discover/edit name when you promote so that your clusters are unique in EM.
    To verify name set for clusterware installation:
    <CRS_HOME>/bin/cemutlo -n

  • ADFS MFA Adapter fails when installed manually

    Dear experts,
    When following the article on http://technet.microsoft.com/en-us/library/dn807157.aspx, my ADFS service cannot load the WindowsAzureMultiFactorAuthentication provider, eventid 105.
    I used the 'Install the AD FS Adapter standalone using the Web Service SDK', with the edited config file using a username and password. When browsing to the SDK folder on my MFA server using IE from the ADFS server, I can login and use all SDK services normally
    but ADFS fails. Installing MFA locally on the ADFS server fixes the issue, but manual configuration should be possbile according to the technet article.
    Also, there is an error in the technet document, it says to 
    Run the MultiFactorAuthenticationUserPortalSetup64.msi
    But this should of course be the adapter MSI file.
    Is there a fix?
    Sincerely,
    Jos

    Thanks for the note on the typo. We'll fix the documentation on MSDN and the MFA Server help file.
    For those having issues getting the adapter to work, we have had a couple of support cases escalated recently that both turned out to be typos in the config file. The registration script needs to have the correct path to the config file, and the config file
    should look something like this:
    <ConfigurationData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
        <UseWebServiceSdk>true</UseWebServiceSdk>
        <WebServiceSdkUrl>https://server.domain.com/MultiFactorAuthWebServiceSdk/PfWsSdk.asmx</WebServiceSdkUrl>
        <WebServiceSdkUsername>domain\username</WebServiceSdkUsername>
        <WebServiceSdkPassword>password</WebServiceSdkPassword>
        <WebServiceSdkCertificateThumbprint></WebServiceSdkCertificateThumbprint>
    </ConfigurationData>
    From the ADFS server, you can copy the WebServiceSdkUrl into a web browser. You should be prompted for a username/password. Enter or copy/paste what you have in the config file. it should display the web service operations without any certificate warnings.
    If there are warnings, you may have to import the certificate into the Trusted Root Certificate store so that the ADFS server trusts it.

  • Perlbrew - locale.t fails when installing perls

    I'm trying to use perlbrew in order to maintain private copies of Perl, rather than doing anything that might touch system Perl.
    I've installed perlbrew successfully, but my attempts to use it to install perl 5.12 and 5.14 have both failed, apparently due to some problems encountered when applying locale.t. 
    I'm running OSX 10.8.0.  Has anyone used perlbrew on this version, and/or encountered this problem?
    Thanks,
    Chap

    Hi Chap
    I'm running OS X 10.8.1.
    I got the same problem when install perl 5.8.5 use perlbrew 0.5.0.
    Then I try " perlbrew --force install perl-5.8.5 --notest ", it worked.
    You can try it!

  • OC4J Instance Failed when installing the SSO against FMW OID 11g

    Hi All,
    We are facing an problem when installing the SSO against OID 11g. The error is OC4J Instance Failed.
    In Installer log it is showing Target Invocation Exception.
    Please anyone advise.
    Thanks in Advance.
    Vaasu.

    Hi All,
    We are facing an problem when installing the SSO against OID 11g. The error is OC4J Instance Failed.
    In Installer log it is showing Target Invocation Exception.
    Please anyone advise.
    Thanks in Advance.
    Vaasu.

  • PE 9 always fails when installing shared technologies.

    I even paid for it (I know theres no diffrence) but I always get the same error (Adobe Premiere elements failed to install shared technologies. Rolling back changes). I have windows 7 x64 And after 3 HOURS of waiting of the phone for a rep, I decided not to contact them for any info. PE 7 installed fine, but they don't work on windows 7.

    Use task manager to see if you have any other Adobe software running in the background - Adobe Bridge is often the culprit for these installation errors. If you find anything running then use End Process.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • BPEL test failed when calling same webserivce twice

    Our BPEL calls same web service, same operation method twice with different parameter values.
    There is only one copy of assert value we could provide in xml.
    The BPEL test failed because one of the input value does not match the assert value.
    Is this supported at all?

    Fusion 11.1.1.3.0
    You are right, if a wire has an assert, it appears all invokes will call the assertion. There is no distinction possible to test between 1st, and subsequent invokes at runtime. All invokes must look the same for the assert to be consistent.
    My experience with the JDev 11g Test Suite shows me that the limitations are huge. 10g BPEL had abilities to test BPEL variables internally, we are waiting for the functionality to be ported.

  • Air project works in test but fails when installed.

    I have a little project I'm trying to put together as a stand-alone widget.  It loads some sounds that are set up in sets and saved in a subdirectory of the application directory.  I have a movie clip in the library that appears when the "Config" button is pressed.
    Works great in test mode.  The sounds are loaded and play.  The config screen shows up when the button is pressed.  The components (two sliders) work and their listeners fire.  Wonderful!
    But when I pack it up as an installable AIR file and then actually install it on my poncuter, epic fail.  The sliders don't appear, the config button doesn't call up the configure movieClip and no sounds are played.  The buttons that I placed on the stage at design time appear but don't appear to function.  Nothing I added programmatically appears.
    Is this an Adobe CS3 problem or did I miss something in the security sandbox?  No files are being written to,  I'm getting a directory listing of ./sets and then opening the files in that directory where .isDirectory comes up false.  The files are XML and point to a folder off the ./sets folder and the files in that set.
    I could probably track this but I have no experience debugging an AIR project.  Trace is not working in development.  How do people debug the final?  Output to a dynamic text field?

    Sorry to hear you are having a tough go of it...
    there should be no reasons that your application functions differently debugging than when you install the application so the behavior you are seeing is likely something easy to fix (as opposed to having to re-write a bunch of AS code :D).
    Couple of Questions:
    1.) Are you using CS3 as-is out of the box - or did you manually upgrade your AIR SDK inside Flash Professional to target a later version?
    2.) What version of AIR are you targeting?
    3.) What version of AIR do you have installed on your system?
    4.) What OS are you running on?
    5.) Can you install any AIR applications on your machine and have them run properly? (Bunch of AIR apps here: http://www.adobe.com/go/airmarketplace)
    6.) It sounds like you are likely using CS3 and not the command line tools - but if you are using the command line tools (ADT) to create your AIR package what command line do you use to create it?
    That should help get things rolling...but likely the best course of action is for you to send us your project so we can take a look. You can send your project to cthilgen at adobe.com - please do not send a zip as our mail system will auto-reject it.
    Also, you should be able to get trace output. If you are using CS3 the trace output goes to the output panel. (Windows->Output) If you are using the AIR command line tools (ADL) - debug output is enabled by default (you have to manually pass -nodebug to turn it off).
    Hope this helps.
    Thanks,
    Chris Thilgen
    AIR Engineering

Maybe you are looking for

  • Mail crashes while downloading mail or trying to view mail

    I am having a bit of a problem. My Mail program crashes every time I try to download mail or view a email. Here is the crash report: Process: Mail [6342] Path: /Applications/Mail.app/Contents/MacOS/Mail Identifier: com.apple.mail Version: 3.5 (929.4)

  • Will Elements 12 accept colour profiles from commercial printers?

    I am currently using Elements 10. I have most of my printing carried out by a commercial company. (DSCL).Apparently, Elements 10 will not "accept" colour profiling, I am therefore submitting material and, literally, hoping for the best, as most of th

  • Asm weird errors

    we have 2 SUN FIRE 6900 with cluster ware 10.1.0.4..2 asm and database the node 1 runs forms reports services for solaris 10 the node 2 runs application server node 1 and node 2 are running different databases node 1 spdb and node 2 turbodb recently

  • Answers Weekly Report

    Hi Guys, I have a requirement for a report in the following format: Let's assume the given date range is 11/03/2008 to 1/30/2008, the report should display between those dates in the below format: WeekEnding Ordered Sold InStock Nov-7 10 12 15 Nov-14

  • Cs6 won't start, trial version opens instead of real version

    after re-installing my system from time machine cs6 won't start, instead the trial version opens. Serial number is not accepted. What to do?