Cyrillic in GoLive

I am making a website with english and cyrillic version. I was able to make the english version and it is functioning fine. But I don't know how to work with cyrillic (Mongolian to be specific) letters in GoLive. I asked Godaddy.com and they said that they supported UTF8 encoding. When I start typing in GoLive, the Mongolian keyboard selection gets deactivated on my Mac. The Russian is there, but Russian doesn't have all the alphabets needed. Also when I copy Mongolian text from other sources and paste it, letters like "ү" and "ѳ" are not recognized. They become ? marks. I know that there are many HTML and flash websites with Mongolian letters, and GoLive should be able to make it.
If any one know this, please help me. I don't know anything about encoding.

It sure is not. I also have problems with some
Russian MP3 files that I download from CD's and their
names show garbage like ăőňħĥ etc. I sometimes
receive email messages in this gibberish that I have
a hard time to convert into legible Russian - I
usually must open them in Safari in order to convert.
However, I have found no way to convert song names
that come with MP3 files into iTunes. Can anyone
help? Not that it is a terrible problem, I have just
a handful of tracks that show funny names, but it is
a bit nagging that I cannot figure out how to conquer
them.
In iTunes the ID3 tags need to be encoded correctly. If nothing else works, you may need to type them in manually.
http://homepage.mac.com/thgewecke/mlingos9.html#itunes
In Mail, you need to go to Message > Text Encoding and try all the Cyrillic options plus UTF-8.

Similar Messages

How Do you use Cyrillic Fonts (Russian) in InDesign CS4 or CS3

I have a headline in Russian a client sent me in an e-mail that I need to use on a poster I'm laying out in InDesign.
I downloaded ERUniverse cyrillic font, and when I paste the Russian headline in a text box and go to select ERUniverse cyrillic, there's no Russian!
Also, I go down to the bottom of my fonts there's Hebrew, Japanesse, Chinese fonts, etc...but no Russian.
Please help with instructions on how to use a cyrillic font!!!

I downloaded ERUniverse cyrillic font, and when I paste the Russian headline in a text box and go to select ERUniverse cyrillic, there's no Russian!
That font must not be Unicode enabled. An old hack to insert Cyrillic characters into a regular font was to replace "unused" characters with Cyrillic ones. So, to type a 'de' д, you would insert the character code for an 'ê'.
Modern fonts are Unicode enabled, which simply means that in every font Cyrillic characters are found in the same place. Thus, changing the font does not change the text.
If you are working on Windows, check the Character Map for fonts that support Cyrillic. Select 'Advanced view', Character set: Unicode, Group by: Unicode Subrange. A small window pops up, enumerating all possible Unicode groups. Scroll down and select 'Cyrillic'. Now the character map will only show these characters for each font, so simply scroll through your font list to see which one have them.
(And OSX no doubt has a similar feature.)
The older Windows system fonts Times New Roman, Arial, Georgia, Verdana, and the newer ones Calibri, Cambria, and Candara, and lots of the fonts that came with your InDesign installation support Cyrillic (at least Minion Pro and Myriad Pro do).
It's also possible the original text has not been typed using a Unicode font. If you need a quick check, select some of the text and select the font Arial Unicode (on a Mac, I think "LastResort" will do). If you see useful text, you're okay to go. If not, you have a huge problem. You will have to find the exact font that was used in the original document and use that, or use Find and Replace to change each character to the actual Cyrillic one (and you will need a hardcopy before you can do that).

Mid year and mid month golive

Hi Gurus,
We follow calendar year, jan to dec. We are going live in mid may.
Client needs profit and loss items from january in sap. Appreciate if you can suggest me strategy for upload of balances. Can i take trial as on end of april. And upload p and l items from january. Upload all other balances as on april 30. Then upload every real transaction for may month till 15th may which is golive date.
And then at may end client will do month end in sap.
I hope i am correct or please provide your thoughts and suggestions.
Thank you

Hi Gurus
   Now i can adjust the professional tax and income tax by entering the amount in IT0015 from Custom wage type.
A.Income Tax for
I have Copied INVT and also coped wage type MVT1 to create custom wage type.
6068             Income Tax deduction
ElimI *          Elim time period ID
Addwt *      RT Result table
amt-s /460     Subtraction
addwt /460    OT output table
MVT0          Voluntory taxx deduction
ELIMI *          Elim Period ID
Addwt /460 OT output table
Addwt *        RT Result table
MVT1            Voluntory Tax deduction
ElimI *          Elim time period ID
Addwt *      RT Result table
amt-s /460     Subtraction
addwt /460    OT output table
MVT2         Voluntory taxx deduction
ELIMI *          Elim Period ID
Addwt /462 OT output table
Addwt *        RT Result table
Is the above rule is right for income tax?
What amount i am entering in IT0015 for WT 6068 that will replcase /460. In this case how to tackle about Eductional cess and others?
B.Professional Tax
Written below rule for Entering Professional tax amount for tamilnadu monly in IT0015 through WT 6076. Kindly let me know whether this is the correct approach
6076 Professional Tax
INPRG? Professional tax region
22
ELIMI *             Elim time period ID
ADDWTE *       RT results table
AMT-S /3P1    subtraction
addwt /3p1      OT output table
amt-s /3p3      Subtraction
Addwt /3p3     OT output table
addwt /422      OT output table
Edited by: HRSAP2011 on Sep 13, 2011 12:58 PM

Mid year golive, regular schema is not calculating anualgross for 12 month

HI
its mid year golive payroll , we uploaded april- sept old result. then run inlk schema.
after that when i run regular payroll system is not taking previous 6 moth salary for annual gross. semilarly system is not considering last 6 month for exemption also
i have uploded /130 tech wagetype also for old result but still its not working.
its calculating everything from oct - march .
please help

Hello Suprita,
I hope your query is on India payroll, if it is so then kindly raise your query in ERP HCM forum, this forum is specific to Payroll North America.
With Regards,
S.Karthik

Apex Listener prints ### instead of cyrillic symbols

Hi everybody!
Apex listener (2.0.4/) prints ### insead of cyryllic symbols when printing to PDF from APEX.
In Glassfish log I found next entries:
[2013-10-02T10:31:44.040+0600] [glassfish 4.0] [WARNING] [] [org.apache.fop.apps.FOUserAgent] [tid: _ThreadID=20 _ThreadName=http-listener-1(3)] [timeMillis: 1380688304040] [levelValue: 900] [[
Glyph "н" (0x43d, afii10079) not available in font "Helvetica".]]
[2013-10-02T10:31:44.040+0600] [glassfish 4.0] [WARNING] [] [org.apache.fop.apps.FOUserAgent] [tid: _ThreadID=20 _ThreadName=http-listener-1(3)] [timeMillis: 1380688304040] [levelValue: 900] [[
Glyph "с" (0x441, afii10083) not available in font "Helvetica".]]
[2013-10-02T10:31:44.040+0600] [glassfish 4.0] [WARNING] [] [org.apache.fop.apps.FOUserAgent] [tid: _ThreadID=20 _ThreadName=http-listener-1(3)] [timeMillis: 1380688304040] [levelValue: 900] [[
Glyph "т" (0x442, afii10084) not available in font "Helvetica".]]
[2013-10-02T10:31:44.040+0600] [glassfish 4.0] [WARNING] [] [org.apache.fop.apps.FOUserAgent] [tid: _ThreadID=20 _ThreadName=http-listener-1(3)] [timeMillis: 1380688304040] [levelValue: 900] [[
Glyph "ь" (0x44c, afii10094) not available in font "Helvetica".]]
I have tried other fonts (Times-Roman and Courier), but result is the same.
Can anybody answer how to teach Apex Listener to work with cyrillic symbols?
My system is: Windows XP SP3, Glassfish 4, Apex Listener 2.0.4, Apex 4.2.3., Oracle XE 11g.

Finnaly, with help from other forums, solution is found:
1. In defaults.xml add entry:
<entry key="fop.configfile">C:\some_path\fop.xml</entry>
2. In fop.xml:
<fop version="1.0" encoding="UTF-8">
<renderers>
   <renderer mime="application/pdf">
   <filterList>
   <value>flate</value>
   </filterList>
<fonts>
<directory>C:\WINDOWS\FONTS</directory>
<auto-detect/>
</fonts>
   <stroke-text>false</stroke-text>
   </renderer>
</renderers>
</fop>
3. restart glassfish.

Problem with Cyrillic fonts in Mail

I have a problem with Mail mangling Cyrillic fonts. It happens like this:
1. I create a new mail. I set my input locale to Bulgarian - Phonetic.
2. I type out the email and send it to someone (afraid I don't know their config).
3. The other person replies - doesn't seem to matter whether it's in English or Cyrillic. Their reply appears perfectly, and also my quoted original text from 1 is fine in their reply when looking at it in my Inbox.
4. I then reply to their reply in Cyrillic as per step 1 above, except by pressing reply, rather than New Mail.
What happens then is as follows:
a - the recipient receives my email and reads the Cyrillic content just fine
b - the email that appears in my Sent folder has all Cyrillic content in the message from steps 1-4 above mangled. The mangling moves Cyrillic letters about - i.e. all characters are in cyrillic and the same original characters always map to the same character, they're just wrong. e.g. Дени gets mapped to дЕОЙ. Стефан maps to уФЕЖБО.
This is a bit annoying - as I have no record of the sent mail, and you're never quite sure whether the mangling is just in the sent folder or whether the recipient is also getting the mangled text.
Any thoughts? I haven't been able to find anyone with a similar problem on these forums.
Thanks in advance,
Stephan
*My configuration*
I'm running Leopard 10.5.6 on a PowerBook.
My Mail version is Version 3.5 (930.3)
Mail is configured to use:
Lucida Grande 11 for Mailbox Font
Lucide Grande 12 for Message List Font
Helvetica 12 for Message Font
My mac has the following input locales installed:
British
Bulgarian (phonetic)

It might be helpful to add that in Mail->Preferences->Composing the setting is Plain Text.
And also that if I reply to myself all day long, this problem doesn't occur - its only when replying to someone else.

How to edit a PC based golive site on mac?

Hi,
I have a golive site file I always edited on golive cs2 on a PC. the PC version crashes too often to be useful. I'd like to try to use the golive site on CS2 golive on the mac side, but I have never had sucess opening the entire site file.
is there some way to convert the file to be mac-centric? individual pages are easy enough to work with in either system, but the site file itself crashes in windows 7 and mac.
Using MacPro 8 core 2.8, 32 GB ram, leopard 10.5.8, have traditionally used parallels xp virtual machine to edit, but now i run windows 7. the windows 7 doesn't work as well as the old XP.
I love golive, fiddled with dreamweaver for several years, but it is not for me, so, please do not just say use dreamweaver.

Hi
When you click on View Data, at bottom click on Edit button
It will prompt a connection details tab wherein you can view and modify the connections
Nik

Questions on Golive - DW8 Migration

I'm a long-time GoLive user - I started testing both apps at
v. 1.0, and Dreamwever didn't get good until version 3, but by that
time I was heavily invested in GoLive.
I now am ready to switch, but i've got a laundry list of
questions of the "I know how to do it in GoLive, how do I do it in
DW?" variety? I've committed to switching, so I'm not looking to
debate which is better - I just want to know how to keep my
productivity up during (and after) the transition
If anyone cares to educate me, i'd love some assistance:
1)I've got 400+ pages and files in one of the 50+ sites that
I work on regularly. So i'm not intimately familiar with the layout
of this particular site. I know I need to edit the contact us page,
but I don't remember if its called contactus.html, or
/about/contact.html or /buried/deep/in/bowels/of/site/contact.html.
In Golive, I type 'contact' into the search box in the site
management window and all files with the word 'contact' pop up for
me to inspect and see which one I want to edit.
How can I quickly find a page/image/file in Dreamweaver if I
know (a portion of) the name?
2)I've got a PDF file in my site that I need to make sure is
linked in, and see which pages are linked to it. In Golive, there's
a 'link in/out' window that shows me all links to and from a
page/image/file. Is there some such beast in Dreamweaver? Looking
in the archives, all I see is the 'delete the file and then see
which pages it says you'll be modifying' method, which seems scary
to me, since my fingers sometimes move of their own accord and I
don't want to REALLY delete the file
3)This whole 'put dependent files' thing has me frustrated.
Lets assume i'm working on a site that I just built from scratch
today, and it has lots of little images. I've uploaded the entire
site to the server, but now I need to create a new image and add it
to one page. In Golive, i'd click the 'upload modified files'
button, and those two files would be uploaded.
In DW8, best I can understand it, I click the 'upload' button
for the page, and I'm given the choice to 'upload dependent files'.
This uploads all 30 images associated with this page, even tho they
weren't changed. Is there some better way to do this?
Likewise, if I just edited an image deep in the heirarchy of
the site, but didn't edit the page, and I only need to upload that
image, is there any button for checking modified files so I don't
have to bother uploading the entire page & images again? This
wouldn't be an issue if DW8 didn't make me wait until the upload
was done before letting me work on something else. I thought this
was something that DW had better than Golive for a while and now
they've lost that feature?
4)Keyboard shortcuts for site window. This may be a Mac OS X
thing, but I would think that a program more geared towards
'coders' rather than 'designers' would be more keyboard-friendly. I
want to be able to navigate the 'files' window of my site by
keyboard - arrows up /down to find a folder, Command-arrow
down/right to open a folder and continue navigating, etc... At
least on my system, this doesn't work - no way to open a folder
other than double-click on it. Am I missing something?
5)SFTP with Authentication - I'm able to successfully connect
to my SFTP server using Transmit/Interarchy, etc, but not
Dreamweaver. I found an old post that says that DW MX doesn't
support non-password authentication - is this true for DW 8 as
well?
Thanks much for all the help - I just found this forum and
will probably be lurking here for a few months as I get the hang of
things now that i've joined 'the other side' :)
Thank you!

Bump - I did figure out # 3.5 above - I found the 'select
modified files' and it will tell me everything I modified that day.
Of course, that doesn't help when I work on 14 files in the morning
and 2 in the afternoon - its still going to select and therefore
upload all 16, but at least that's better than all 300+ files.
I'm most interested to see what people say about #1 and #2 -
how do I find a file in my large site, and how do I find out what
pages are linked to a specific page or image, other then by
'almost-deleting' it?

How do I stop GoLive from changing the location of my CSScriptLib.js file?

How do I stop GoLive from changing the location of my CSScriptLib.js file?
I am making rollovers and want my CSScriptLib.js to be in the same folder as my HTML files.
Every time I edit the rollovers GoLIve recreates the path of the CSScriptLib.js to file:///Users/xxx/Library/Preferences/Adobe/GoLive/Settings8/JScripts/GlobalScripts/CSScr iptLib.js so it won't work when uploaded. I always need to edit my HTML before uploading. All I want it to say is src="CSScriptLib.js" as the default.

The site file is a database that keeps track of all your assets (and much more), including the scriptLib file. As soon as the page is saved (when you use the site file and it's open) the link will be change to the correct path that will work on the server.
If you're not using the site file you might as well use a text editor, since most of GL functionality is gone.

Cyrillic ID3 tags in Music Player

I have a n82 and love it, but I tried to loaded a cd album which contains Russian ID3, but when i try to view the artist,song,album names in the phones built-in music player all I see is weird characters as though my phone doesn't support non-Unicode text. I know for a fact that it displays files with Russian taext in the file name just fine and writes and read in Russian just fine but the ID3 tags are a bit tricky for it.
What can I do to make the music player display Russian ID3 tags properly?

as i know, sans serif doesnt provide unicode mapping. have you tried to change to arial unicode or others eg. code2000??
I'm using arial unicode ms to show japanese symbols,and it should work for cyrillic too,since cyrillic is also mapped in arial unicode. font changing is also affect in all app (i suppose), including java app.
my N73 ME APAC (indonesia) is only able to display latin chars,n by changing the font (that is supports unicode one), now my phone is able to show japanese symbol (including ID3 tag in music player).
Message Edited by hikku13 on 08-Jul-2008 05:38 PM

Browsers no longer able to read russian / cyrillic characters

Ever since i upgrading to Snow Leopard just recently i noticed that my all browsers (safari, firefox, chrome etc) are unable to read russian / cyrillic characters. While i can type russian letters in the search bar or in pages / key notes for example i can not read or write in the browsers.
As an example if i go to google.ru i can't read the writing ... I've uploaded a screenshot for you to see here: http://cl.ly/0g2u0e10363I2b1a0i1f/
The text encoding is set how should be also.
Please let me know if you can help ...

As an example if i go to google.ru i can't read the writing ... I've uploaded a screenshot for you to see here: http://cl.ly/0g2u0e10363I2b1a0i1f/
Very strange! There is of course one word which you can in fact read, namely веб at the upper left, the only one which is not a link of some sort. Could you provide another example where the site is showing text and not links?

Cannot install GoLive 8.01 0n new MacBook Pro/Snow leopard

Purchased a brand new MacBook Pro (with the new Snow leopard) so I could leave my house and still work.
The most important application I use is Adobe golive CS2 8.01.
I have the 6.0 disk, and the upgrade registration number but they will not install in the MacBook Pro/Snowleaopard. I've tried 50 times. It will allow an install of the 6.0, but says my registration number is invalid for the upgrade.
Adobe doesn't support the product anymore on any level. I'm beside myself. The laptop is worthless to me without that application.
I've tried replacing the keylogin, prefs reinstalls etc... nothing.
I'm desperate. If anyone has any ideas, please help.
g
Regards,
George Edgar Joyce III
JoyceMedia

George Edgar Joyce III wrote:
hang on a second...
GL CS2 and ( both work on snow leopard. Matter of fact Adobe LiveMotion works on Snow leopard! Howe3ver, you cannot open your se\aved documents... still working on this too....
but, GL works great with SL....on my desktop, golive was already installed when I upgraded to snow leaopard... works great...
I doing a clean install on the laptop..that's where I'm stuck...
wonder is you upgrade with GL INSTALLED ON YOUR LAPTOP...IT SHOULD STILL WORK...
let me know if you try it..
i'm thinking of downgrading the OS on the laptop, install GL and then upgrade back to SL... too much freakin work!
g
Downgrading, install GL, then upgrade sounds like a good move. Let me know if it works... if you do it. I understand the frustration of having to go to all this trouble. I've had my share of problems lately. First my MBP hard drive went bad. Had to reinstall everything. Then I took it on a trip so I could keep up with client work, and it died again. Took it to Apple in Portland, Maine. They had to ship it off for repairs again. This time the Logic Board and Video Display. Now my G5 is acting up again. Often too busy to deal with it.
I'll follow along to see how things go for you. Keep us posted if you would.

How to find the user who never logon R3 system since system golive.

Hi everyone,
Our R3 system golive on 2005.Due to some reasons,we need to find out the users who never logon R3 system since system go live and want to delete it.Those large numbers of unvalued users has been created because of imprecise estimation before golive.So for now,we willing to remove those users by using some kind of method.and you know,the number of unvalued user are immense,so it's impossible to identify this kind of user by using T-code su01 one by one.
Thanks in advance.

Hi rong,
Run report RSUSR006. One of the criterias is "Users with Initial Password"
That should answer your question.
Regards
Juan

Bug with Cyrillic-UTF-8 encoding in Outlook messages sent from iphone

Some time, during replay or forwarding mails, written in Cyrillic form iPhone3GS (iOS 4.0), iPhone send a format of the message UTF-8 and did not field the charset field.
In such case most of the windows client(Outlook, The BAT, Firefox) cannot recognize the message encoding automatically. Advanced clients have to use manual setting of the encoding.
In older iOS in iPhone2G i have't met such problem

try this
-----------------------------------------------message I send:
Return-Path: <[email protected]>
Received: from FS011 ([10.10.10.11])
(authenticated user [email protected])
by mail.xxx.ru
for [email protected];
Wed, 28 Jul 2010 12:54:53 +0400
Message-ID: <12ED165C69BD4E59B70551BC5AF7A0F4@FS011>
From: =?koi8-r?B?8MXexc7Lyc4g88XSx8XK?= <[email protected]>
To: <[email protected]>
Subject: TEST
Date: Wed, 28 Jul 2010 12:54:49 +0400
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="----=NextPart_000_043C01CB2E54.10472660"
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Windows Mail 6.0.6001.18000
X-MimeOLE: Produced By Microsoft MimeOLE V6.0.6001.18049
Sender: <support-owner@xxx>
List: <[email protected]>
List-Help: <mailto:[email protected]>
List-Post: <mailto:[email protected]>
List-Subscribe: <mailto:[email protected]>
List-Owner: <mailto:[email protected]>
List-Id: <support.xxx.ru>
List-Unsubscribe: <mailto:[email protected]>
Errors-to: <[email protected]>
X-BeenThere: <[email protected]>
Precedence: list
This is a multi-part message in MIME format.
------=NextPart_000_043C01CB2E54.10472660
Content-Type: text/plain;
charset="koi8-r"
Content-Transfer-Encoding: quoted-printable
=F3 =D5=D7=C1=D6=C5=CE=C9=C5=CD
=F2=D5=CB=CF=D7=CF=C4=C9=D4=C5=CC=D8 IT =CF=D4=C4=C5=CC=C1
------=NextPart_000_043C01CB2E54.10472660
Content-Type: text/html;
charset="koi8-r"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; charset=3Dkoi8-r">
<META content=3D"MSHTML 6.00.6001.18183" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DL>
<DT>------------------------------------------</DT>
<DT>=F3 =D5=D7=C1=D6=C5=CE=C9=C5=CD</DT>
<DT>=F2=D5=CB=CF=D7=CF=C4=C9=D4=C5=CC=D8 IT =
<SPAN=20
lang=3Dru-RU>=CF=D4=C4=C5=CC=C1</DT>
<DT>=EF=EF=EF «=E6=C9=D2=CD=C5=CE=CE=D9=CA =
=D3=C1=CC=CF=CE»</DT>
<DT>=F0=C5=DE=C5=CE=CB=C9=CE =F3=C5=D2=C7=C5=CA</DT>
<DD><FONT face=3DArial =
size=3D2>
</DD></DL></BODY></HTML>
------=NextPart_000_043C01CB2E54.10472660--
-------------------------------------------- message from iphone
Return-Path: <[email protected]>
X-Envelope-To: [email protected]
Received: from [192.168.0.82] ([10.10.10.10])
(authenticated user [email protected])
by mail.xxx.ru
for [email protected];
Wed, 28 Jul 2010 13:00:27 +0400
Message-Id: <[email protected]>
From: =?koi8-r?B?8MXexc7Lyc4g88XSx8XK?= <[email protected]>
To: =?koi8-r?B?8MXexc7Lyc4g88XSx8XK?= <[email protected]>
In-Reply-To: <12ED165C69BD4E59B70551BC5AF7A0F4@FS011>
Content-Type: multipart/alternative;
boundary=Apple-Mail-1--794833101
Content-Transfer-Encoding: 7bit
X-Mailer: iPhone Mail (7D11)
Mime-Version: 1.0 (iPhone Mail 7D11)
Subject: Re: TEST
Date: Wed, 28 Jul 2010 12:59:18 +0400
References: <12ED165C69BD4E59B70551BC5AF7A0F4@FS011>
--Apple-Mail-1--794833101
Content-Type: text/plain;
charset=windows-1251;
format=flowed;
delsp=yes
Content-Transfer-Encoding: quoted-printable
=CE=EA
=D1 =D3=E2=E0=E6=E5=ED=E8=E5=EC
=D1=E5=F0=E3=E5=E9
28.07.2010, =E2 12:54, =CF=E5=F7=E5=ED=EA=E8=ED =D1=E5=F0=E3=E5=E9 =
<[email protected]> =ED=E0=EF=E8=F1=E0=EB=20
(=E0):
=D1 =F3=E2=E0=E6=E5=ED=E8=E5=EC
=D0=F3=EA=EE=E2=EE=E4=E8=F2=E5=EB=FC IT =EE=F2=E4=E5=EB=E0
--Apple-Mail-1--794833101
Content-Type: text/html;
charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body bgcolor=3D"#FFFFFF">=D0=9E=D0=BA
------------=
=D0=A1 =
=D0=A3=D0=B2=D0=B0=D0=B6=D0=B5=D0=BD=D0=B8=D0=B5=D0=BC
=D0=A1=D0=
=B5=D1=80=D0=B3=D0=B5=D0=B9
28.07.2010, =D0=B2 =
12:54, =D0=9F=D0=B5=D1=87=D0=B5=D0=BD=D0=BA=D0=B8=D0=BD =D0=A1=D0=B5=D1=80=
=D0=B3=D0=B5=D0=B9 <<a =
href=3D"mailto:[email protected]">[email protected]> =
=D0=BD=D0=B0=D0=BF=D0=B8=D1=81=D0=B0=D0=BB(=D0=B0):
</di=
v>
<dl>
<dt>------------------------------------------</dt>
<dt>=D0=A1 =D1=83=D0=B2=D0=B0=D0=B6=D0=B5=D0=BD=D0=B8=D0=B5=D0=BC</dt>
<dt>=D0=A0=D1=83=D0=BA=D0=BE=D0=B2=D0=BE=D0=B4=D0=B8=D1=82=D0=B5=D0=BB=D1=
=8C IT <span =
lang=3D"ru-RU">=D0=BE=D1=82=D0=B4=D0=B5=D0=BB=D0=B0</dt>
<dt>=D0=9E=D0=9E=D0=9E =C2=AB=D0=A4=D0=B8=D1=80=D0=BC=D0=B5=D0=BD=D0=BD=D1=
=8B=D0=B9 =D1=81=D0=B0=D0=BB=D0=BE=D0=BD=C2=BB</dt>
<dt>=D0=9F=D0=B5=D1=87=D0=B5=D0=BD=D0=BA=D0=B8=D0=BD =D0=A1=D0=B5=D1=80=D0=
=B3=D0=B5=D0=B9</dt>
<dd>
</dd></dl>
</body></html>=
--Apple-Mail-1--794833101--

Golive CS2 too slow on my Mac g5 to get any work done?

For the past 2 years I have been slowly building a rather large web site (about 2000 hours invested). We will be selling items we import from india (my girlfriend and I spend 3 moths a year in India) and then there is an entire section on India travel tips, photos and travel logs.
I am pleased with Golive 6.01 and recently converted my site to CS2, just to find it is very slow on my macintosh G5 and many weird bugs And site looks the same as in 6.01 when previewed in various browsers. Also in CS2 when I click on preview button, the page I want to work on closes and the page that brought me to that page pops up.
I bought a G5 macintosh which should run CS2 more quickly but:
I have yet to see my site in Explorer 7 for Windows because Microsoft did not make Explorer for Mac after version 5.0.
My question is:
Why not complete site in 6.01 and then before it is published convert to CS2. I can't get anything done with CS2 it is just way too slow.
Thanks Stuart
(Could installing 2 versions of Golive on one drive be generating the bugs?)

Hi all:
Been cleaning up Site (weird files not in my site but on desktop keep showing up as errors) got ride of them. Turned of my internet connection). Things seem to be getting better.......for now. Working on G4....will move to my G5 and see.
Might pull this one out.
Why several target files with only one source show as an error is an irratation because help says it's not really an error and can be ignored.
OH...one quick question do SOURCE files get uploaded to host when one publishes? Or perhaps a better question! Do SOURCE files need to be uploaded to host. I suspect not...but I also suspect It's OK..might just slow things down a bit?
Thanks to all of you.....this miserable world needs more like you all!
Mac
Stuart Sims aka Master Quark

Cyrillic in GoLive

Similar Messages

Maybe you are looking for