Cystal reports 2008 conversin caused parameters not to show

We started the process of upgrading our runtime to the lastest version 2008. We were on XI and everythign worked fine. Now when we invoke a report through c# program, if the parameter is not explicitly placed in teh report page the parameter does not show up. We have to put the parameter in the report ofr them to be invoked. Is there a setting or a code piece that we need to put in place in order for it to prompt for every parameter that is being used in the report. Most of our reports are used in selects and not displayed directly in the report.

Remember this is only a community forum. Not technical support as such. You may get an answer, you may not... If you need technical support, you can create a phone case here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100
Ludek

Similar Messages

Crystal Report 2008 results "Password did not match error" in SQL Server Log

Hi,
I am trying to develop some crystal reports using Crystal Report 2008 SP4 to connect to SQL server 2008 through RDO (ODBC). My problem is that anytime Crystal Report is trying to establish a connection with SQL Server, first it tries to connect with the wrong password and results the following error message in SQL Server log:
Login failed for user 'peyman'. Reason: Password did not match that for the login provided. [CLIENT: 192.168.2.198]
The login name 'peyman' is the right one as I have quoted the same in setting up ODBC System DSN using "SQL Server Native Client 10". But somehow Crystal Report is taking its chance and trying to connect before prompting me for the password. After this error logged to SQL server side, I can see Crystal Report pops up the prompt to enter DSN password. After supplying password to this prompt, Crystal Report works fine and pulls the data and renders the report without having any more incorrect password error logged to SQL Server.
The attached file shows the step I am taking to regenerate the issue. I need this to be fixed as anytime uses any of these reports and tries to render it with crystal runtime engine the same error message raises in SQL Server side and logged in the log file.
Thanks,

Hi Peyman,
This is the way it should work, In CR designer when you open the report it does nothing. As soon as you hit the Refresh button then CR tries to use the connection saved with the report. It assumes what is saved with the report is a valid server and connection info. CR simply tries to verify the server is still active.
If you don't want it to fail in CRD then before opening any report Click the File, Log on Database option and connect. Now when refreshing reports it won't log the failed.
In the SDK it does the same thing, it assumes the Server info is the same and does try to connect to verify the Server does exist. It only takes a few milli-seconds to do this
To stop this from happening set the log on info first then it won't log the attempt to connect, it's checking to see if Trusted is allowed.
TIMESTAMP    THREAD_ID    FILENAME    LINE_NUMBER    LOGGED_DATA    LEVEL
2014-6-2 8:30:11.439    57320    .\QESession.cpp    444    Set Product View Locale: 4105    20
2014-6-2 8:30:11.439    57320    .\QESession.cpp    478    Set Preferred View Locale: 4105    20
2014-6-2 8:30:11.439    57320    .\QESession.cpp    500    Set Process Locale: 4105    20
2014-6-2 8:30:11.440    57320    .\qecommon.cpp    117    This property is currently in a read-only state and cannot be modified. File Name: ".\QEProperty.cpp". Line: 217    1
2014-6-2 8:30:11.967    57208    .\QESession.cpp    444    Set Product View Locale: 4105    20
2014-6-2 8:30:11.967    57208    .\QESession.cpp    478    Set Preferred View Locale: 4105    20
2014-6-2 8:30:11.967    57208    .\QESession.cpp    500    Set Process Locale: 4105    20
2014-6-2 8:30:11.968    57208    .\qecommon.cpp    117    This property is currently in a read-only state and cannot be modified. File Name: ".\QEProperty.cpp". Line: 217    1
2014-6-2 8:30:11.999    57208    .\QESession.cpp    444    Set Product View Locale: 1033    20
2014-6-2 8:30:12.4    57320    .\qecommon.cpp    117    This value is write-only. File Name: ".\QEProperty.cpp". Line: 145    1
2014-6-2 8:30:56.278    57208    .\odbcapi.cpp    301    Beginning COdbcapi::DriverConnect    20
2014-6-2 8:30:56.342    57208    .\odbcapi.cpp    335    Ending COdbcapi::DriverConnect    20
2014-6-2 8:30:56.342    57208    .\connect.cpp    2170    SQLDriverConnect succeeded: DSN = 192.168.13.172, User ID = sa, Password = ********    10
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 854    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 854    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 826    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 854    1
2014-6-2 8:30:56.348    57208    .\qecommon.cpp    117     File Name: ".\QEQueryInfo.cpp". Line: 916    1
2014-6-2 8:30:56.348    57208    .\QERowset.cpp    1184    Beginning CQERowset::readFirstRecord    20
2014-6-2 8:30:56.348    57208    .\QERowset.cpp    2149    Beginning CQERowset::restart    20
2014-6-2 8:30:56.348    57208    .\QERowset.cpp    2370    Beginning CQERowset::execute    20
2014-6-2 8:30:56.353    57208    .\DbQueryBuilder.cpp    514    Query Targets: sqlncli10, ODBC3SQLServer    10
2014-6-2 8:30:56.353    57208    .\DbQueryBuilder.cpp    525    Successfully built query:    SELECT "Orders"."Customer ID", "Orders"."Employee ID"   FROM   "xtreme"."dbo"."Orders" "Orders"    10
2014-6-2 8:30:56.353    57208    .\odbcapi.cpp    875    Beginning COdbcapi::ExecDirect    20
2014-6-2 8:30:56.354    57208    .\odbcapi.cpp    884    Finishing COdbcapi::ExecDirect    20
2014-6-2 8:30:56.354    57208    .\rowset.cpp    220    SQLExecDirect succeeded: SELECT "Orders"."Customer ID", "Orders"."Employee ID" FROM   "xtreme"."dbo"."Orders" "Orders"    10
2014-6-2 8:30:56.354    57208    .\QERowset.cpp    2814    bindToField succeeded: Orders.Customer ID is using client buffer    10
2014-6-2 8:30:56.354    57208    .\QERowset.cpp    2814    bindToField succeeded: Orders.Employee ID is using client buffer    10
Notice it doesn't try to connect first if I set the log on info first using code.
So nothing we can do to stop SQL server from logging this info. Check with the DBA, possibly they can "filter" out the application attempts to connect or change your work flow in the app.
If you have a Preview Button to view the report then simply add your Database log on info prompt there if Connectioninfo.Trusted is not true:
mainSecureDB = rpt.Database.Tables[tableIndex].LogOnInfo.ConnectionInfo.IntegratedSecurity;
if mainSecureDB = false then prompt the user for log on info and set accordingly, if it is true the it should not fail when it connects.
This is simply a matter of changing your App work flow...
Thanks
Don

Crystal Report 2008 Crosstab Cell Margin Not Editable

Hi All,
Currently I am designing a new report with Crystal Report 2008. I am using crosstab feature.
I have an issue with the margin in the cells. I've managed to resize the cells in the crosstab using the "Size and Position" option but I don't have a choice to set the margin in the cells.
I do know there is an option to do "Grid Options -> Show Cell Margins" but once the Cell Margins is shown do we have the choice to set the margin?
Please help!!!
Thanks
David

Hi David,
I think in cross tab, cell margins will be set automatically based on your row and column combination.
Thanks,
Sastry

UI Loading Cystal Reports 2008 ActiveX Viewer into SAP B1

I have been looking over Code Samples, Help Forums and documentation from Business Objects for pas 5 hours. I made this work with VS2003 and CR10 but now im running VS2005 with CR2008.
Here is my code; It crashes on the bold line with the message: "Invalid cast".
The report is there and valid.
It does not even connect to a database; it has one text field in the header containing "Helloworld"
Oh and one more thing; i dont have this class CRAXDDRT. Im assuming that the class was stopped at CR11...
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class cCRViewer
    Protected oForm As SAPbouiCOM.Form
    Protected oDataSources As SAPbouiCOM.UserDataSources
    Protected WithEvents oCRViewer As CrystalActiveXReportViewerLib12.CrystalActiveXReportViewer
    Public ocr As New ReportDocument
    Public Sub New()
        Dim oActiveX As SAPbouiCOM.ActiveX
        Dim oItem As SAPbouiCOM.Item
        Try
            oForm = oApplication.Forms.Add("NewClass", SAPbouiCOM.BoFormTypes.ft_Sizable, "900201")
            oDataSources = oForm.DataSources.UserDataSources
            oItem = oForm.Items.Add("Viewer", SAPbouiCOM.BoFormItemTypes.it_ACTIVE_X)
            oActiveX = oItem.Specific
            oActiveX.ClassID = "CrystalReports12.ActiveXReportViewer.1"
            oCRViewer = oActiveX.Object
            ocr.Load("D:\TEST.rpt")
            oCRViewer.ReportSource = ocr
            oForm.Visible = True
        Catch ex As Exception
        End Try
    End Sub
Thanks
Denis
Edited by: Denis Doiron on Sep 24, 2008 8:17 PM
Edited by: Rui Pereira on Dec 23, 2008 2:44 PM

Denis,
I don't know what's wrong will your code, but I can tell I'm using a .NET form to show the ReportViewer.
Regards,
Vítor Vieira
Edited by: Rui Pereira on Dec 23, 2008 2:52 PM

Integrate Crystal Reports 2008 in Lotus Notes 8.x

We allready use Crystal Reports 2008 with Lotus Notes 8.x trough NotesSQL 8.5. This works fine.
Now we want integrate Crystal Reports 2008 directly in Lotus Notes 8.x. so that the user can start reports directly from his Lotus Notes Application. Of course, data has to be retrieved in realtime (not with data stored in the report) and he should be able to pass parameters from a lotus notes form.
All informations we found are quit old (Crystal Reports 8.5 and Lotus Notes R5). Does anyone has an idea how to start and where to find new documentations? Is there maybe even a sample application availabl?
Any help is welcome!

Hello Alain, I have the same troubles. I have some databases with Crystal Reports 9. But no solution for Crystal Report 2008.
Which dll's are needed?

Compatability of Crystal Reports 2008 with BOE 11.5 - (.rpt output)

Hi -
I am planning an upgrade to Crystal Reports 2008 to take advantage of capabilities of Crystal Reports Viewer 2008 to modify parameters in reports (ex: posting reports to a shared drive for users to open and modify parameters).
In order to have this functionality in Crystal Reports Viewer (2008), I must create the report in Crystal Reports 2008. My question is: If I create the report in Crystal Reports 2008 and schedule the report to run on Business Objects XI.5, will the users be able to modify parameters in the report file output?
Thanks

Hello,
You need BOE XI 3.0 or later for full compatibility with Crystal Reports 2008. The parameters panel will not be displayed in any earlier version.
Also, some Crystal 2008 syntax is not supported in versions of BOE earlier than BOE XI 3.0. Use of such functions will result in report failures when run in older versions of BOE. For example the function hasvalue() is new to Crystal 2008 (checks for empty values in fields) and caused report failure in BOE XI R2 when published.
Ravi

Error while trying to install Crystal Reports 2008 SP3

Has anyone else come across this error before when running the SP3 update installer;
Crystal Reports 2008 SP3 Update is not allowed to install because a patch with a higher version was detected.
The installation then terminates. There has been nothing installed on this server to do with Crystal, aside from CR2008, SP1 and then the attempt at SP3.
ANY help appreciated
Edited by: Ludek Uher on Aug 18, 2010 2:07 PM

Priyanka,
I'm already extremely annoyed that a new server build requires installation of CR2008, then SP1 before SP3 will even allow installation. Adding SP2 into the mix just makes it seem like none of the developers tested anything (which I'm seeing from just about every software company I deal with these days).
Besides, the 'SAP Business Objects Support Software Downloads' page no longer lists SP1 or SP2 as available downloads, so I'm going to have to try Don's solution first.
Regards.

Crystal Reports 2008 in Windows Vista x64 + IIS7 DOESNT WORK!!!!!! HELP!

Hi,
I´m developing an application with Microsoft Visual Studio 2008 and Crystal Reports 2008 Professional
(i´m not using the Crystal Reports 2008 for .Net basic)
As I have Windows Vista x64, my ASP.NET applications run under IIS7, but for my surprise, Crystal doesn´t work under Vista x64 + IIS7. I got the following error:
An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
When I run the same routine in an Windows Application the error doesnt occur. It only happens under Web Applications.
I tested in a Windows Vista 32 bit and there´s no error....
Crystal Reports 2008 does not work in II7 x64 ?
Is there any solution?
Please.... help me!!!!!

Hi Fernando,
Please read and follow the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] for future topic posts as yours violates the current policy.
You will need to build your application to run in 32 bit only mode. This note explains how to do it:
[Set app to 32 bit mode|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Jason

Error when install crystal report 2008

When i was installing CR 2008 on windows 2008, system shows following errrors during the installation:
error 1904 module c://.../reportSourceBridge.dll failed to register
error 1904 module c://.../reportPromoptEMF.dll failed to register
and i tried to registrate manually buy using cmd:
>regsvr32 ReportSourceBridge.dll
system display this error:
loadlibrary("ReportSourceBridge.dll") failed - the specified procedure could not be found
does anyone can help me?
thanks.

Hi:
i readed this thread:
[Installing Crystal Reports 2008|Installing Crystal Reports 2008]
but this is not the correct solution for my problem
it shows The specified PROCEDURE (not module) could not be found.
Edited by: Abydss on Dec 14, 2009 12:33 PM

Crystal Reports 2008 - dynamic parameters not returing all data

I am having the same issue with Crystal Reports 2008. Only returning 135 customers in a dynamic paramaters when the list should be 3288.
When I re-create the parameter by using a command instead of relying on Crystal to return the data from the db table Crystal returns only 5"pages" of customers to select from.
I have tried to run the report with this reduced selection & it then crashes.
Any ideas??

This article may help you to increase the number of values in the parameter
KBase Article ID:c2017238
Article refers to: Crystal Reports XI BusinessObjects Enterprise XI
Symptom
For performance reasons, in Crystal Reports XI Release 1 and Release 2 the maximum number of values that are returned for a list of values is set to 1000. If you have a cascading List of Values (for example Country > Region > City), the lowest level (in this case City) will only display a maximum of 1000 values. This means that the higher-level prompts may display far fewer values than you expect. The list of values provides the data for the dynamic parameter list.
How can you modify the maximum number of values available in a dynamic parameter list?
Resolution
To increase the maximum number of values available in a dynamic parameter list, you must add a registry key.
CAUTION     The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe).
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
Crystal Reports XI Release 1
1.     Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV.
NOTE     Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV key.
2.     Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter. NOTE: The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
NOTE     The higher the number of values is, the longer it will take the Enter Values dialog box to populate with values.
3.      After making changes to the registry, restart the affected service or application as required.
Crystal Reports XI Release 2
1.     Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV.
NOTE     Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV key.
2.     Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter.
NOTE     The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
3.     After making changes to the registry, restart the affected service or application as required.
Regards,
Raghavendra

Parameters not poputating Crystal reports 2008 and VISTA

We have a client working with CR2008 reports with dynamic CR parameters working. Until last week,
everything was ok, but, after some Windows(vista) updates, now, in one computer (and just in that
computer, rest of people is working fine), when trying to run any CR2008 reports parameters are not
populating(drilldown control is wrongly empty) and even calendar of date parameters is not working.
What can i do to solve this issue?

Finally I've opted for uninstalling all crystal programs, and every microsoft framework updating, install again microsoft framework 3.5 and reinstall SBO Client and CR runtime 2008. Now it is working again.

Crystal Report Viewer 2008, postback causes a weird QueryString for dates

HI,
I'm having a weird problem that was masked with the error "".
What is happening to me is that i have an ASPX page where the QueryString passed in is used as parameters to the report (straightforward). When the page first loads, this is all fine the QuerySTring is properly parsed and the report is properly displayed. Now, the problem comes when i click on the PRINT Button it performs a postback, and during that postback the querystring is read so that it can rebuild the report on the postback. (In previous versions of crystal, this has always worked). The issue here is that the version 12 of the report viewer here now appears to also append some information to the query string that was not previously there (like this: ServletTask=Print&cmd=get_pg&page=1) So the problem here for me is this is what my original QueryString looks like:
tokenid=b2817081-6b52-43c7-8e2c-d6209af2ed98&Type=Appointment&Val=12%3b1%3b1%3b06%2f10%2f2000
THat query string is generated by the following code (pre-encoded)
"PrintPage.aspx?tokenid=" & Guid.NewGuid.ToString & "&Type=Appointment&Val=" & "12" & ";" & "1" & ";" & "1" & ";" & "1/1/2000" (NOTE the date here, i'll get to that in a second)
Then, what the problem is on the postback the Query String looks like this:
tokenid=2a4f42de-bd90-48b5-ac82-bd34b503afd3&Type=Appointment&Type=Appointment&Val=12%3b1%3b1%3b1%2f1%2fPrintPage.aspx%3ftokenid%3d2a4f42de-bd90-48b5-ac82-bd34b503afd3&Val=12%3b1%3b1%3b1%2f1%2f2000&ServletTask=Print&cmd=get_pg&page=1
As you can see here it's all messed up.
So, what i found here is that the underlying cause is that we are passing a "date" in the original QueryString and it seems on the postback the Crystal Reports Viewer is having some issue with that and basically messes up the query string...
I have Crystal Reports 2008/SP3 installed.
Any help would be greatly appreciated.
Thanks

Cleaning up these forums I came across this unanswered thread.
Very weird behavior that I have seen maybe 3 or 4 years ago - I think it was with opendocument.aspx...
In this case, we appear to be re-adding the querystring with the aspx name and question mark (u2026.parentagesu2026). Having two question marks (%3f) is essentially a malformed URL since this indicates where the querystring starts.
The duplicate querystring may have been a coding error(?) where it gets added again on a postback.
Were you able to resolve the issue?
Ludek

SAP Crystal Report (2008) through SQL Query parameters

Hi,
I Created a report in Crystal report (2008) based on Sql Query. I created parameters in SQL query prompt only (all single valued).
Based on this I need to show the data in detail section.
For Graph, I used another SQL query, and added one subreport to the Main report header section. Since this subreport is also using the SQL query prompts for taking parameters.
Since both the reports are using same set of parameters. I mapped Main report parameters to sub-report parameters.
So Now structure is like,
In a report there is one subreport.
Main report ....SQL query generates parameter prompt..same parameters is passed to subreport.
In subreport there are sql generated prompts. and we mapped that prompts to main report parameter prompts.
Now it is running fine from crystal report, but not from CMC. It is not showing the graph.
Made Two Experiment:
1. To check subreport is running or not , Mannualy put my name in sub report--working fine.(CMC)
2. To check the parameters are correctly mapped--printed the value in subreport--Showing all the parameters value from CMC
but it is not running the SQL query of that sub report.
Any suggestion ?? Or is there anyoption to check?? Or a CMC setting.
Please suggest and respond..
Thank you in advance.!!

Hi Rajeev,
This is Crystal reports development community, you said the report is working fine in Crystal. it is problem in CMC. So the issue is at BI Server.
So i think you need to create the thread in the below community.
BI Platform
--Naga

Sub Report not working in Crystal Report 2008 using JSP

I am having developer license of Crystal Report 2008. I am able to generate report using Java JDK 1.5 , JSP,Oracle10g , deployed on WebSphere Application Server 6.1.0.29. I am not able to generate Sub reports. Can you please help us with sample code to how to call and configure subreport and please send configuration CRConfig.xml.
The below Error is Occurred on generating report.
On condition when we link the main report to subreport through parameter.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
                at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:741)
                at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
                at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
                at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
                at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
                at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
                at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
                at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
                at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
                at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
                at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
                at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
                at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
                at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186)
                at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:1558)
                at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(SourceFile:767)
                at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(SourceFile:324)
                at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPage(SourceFile:149)
                at com.businessobjects.report.web.event.s.a(SourceFile:158)
                at com.businessobjects.report.web.event.s.a(SourceFile:127)
                at com.businessobjects.report.web.event.bt.a(SourceFile:47)
                at com.businessobjects.report.web.event.bw.broadcast(SourceFile:93)
                at com.businessobjects.report.web.event.am.a(SourceFile:53)
                at com.businessobjects.report.web.a.t.if(SourceFile:2104)
                at com.businessobjects.report.web.e.a(SourceFile:300)
                at com.businessobjects.report.web.e.a(SourceFile:202)
                at com.businessobjects.report.web.e.a(SourceFile:135)
                at com.crystaldecisions.report.web.ServerControl.a(SourceFile:607)
                at com.crystaldecisions.report.web.ServerControl.processHttpRequest(SourceFile:342)
                at com.ibm._jsp._CrystalReportViewer._jspService(_CrystalReportViewer.java:107)
                at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:87)
                at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
                at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1143)
                at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:591)
                at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:481)
                at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:122)
                at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:226)
                at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionProcessor.handleRequest(AbstractJSPExtensionProcessor.java:286)
                at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3453)
                at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:267)
                at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:815)
                at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1466)
                at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:119)
                at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
                at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
                at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
                at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
                at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
                at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
                at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
                at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
                at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
                at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
                at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1473)
Caused by: java.lang.NullPointerException
                at oracle.jdbc.driver.OracleResultSetMetaData.<init>(OracleResultSetMetaData.java:84)
                at oracle.jdbc.driver.ScrollableResultSet.getMetaData(ScrollableResultSet.java:1282)
                at com.crystaldecisions.reports.common.data.JdbcCrystalResultSet.getMetaData(Unknown Source)
                at com.businessobjects.reports.jdbinterface.common.ResultSetReader.bindToField(Unknown Source)
                at com.crystaldecisions.reports.queryengine.ResultSetRecordReader.a(SourceFile:80)
                at com.crystaldecisions.reports.queryengine.Rowset.a(SourceFile:1107)
                at com.crystaldecisions.reports.queryengine.Rowset.z9(SourceFile:1025)
                at com.crystaldecisions.reports.queryengine.Rowset.Aa(SourceFile:988)
                at com.crystaldecisions.reports.queryengine.Rowset.z3(SourceFile:967)
                at com.crystaldecisions.reports.queryengine.Rowset.bL(SourceFile:533)
                at com.crystaldecisions.reports.queryengine.Rowset.zM(SourceFile:245)
                at com.crystaldecisions.reports.queryengine.RowsetBase.zA(SourceFile:156)
                at com.crystaldecisions.reports.queryengine.QueryInfo.vE(SourceFile:261)
                at com.crystaldecisions.reports.datafoundation.DFQuery.for(SourceFile:628)
                at com.crystaldecisions.reports.datalayer.a.do(SourceFile:1621)
                at com.crystaldecisions.reports.datalayer.a.a(SourceFile:1404)
                at com.crystaldecisions.reports.dataengine.m.b(SourceFile:334)
                at com.crystaldecisions.reports.dataengine.j.b(SourceFile:515)
                at com.crystaldecisions.reports.dataengine.m.o(SourceFile:408)
                at com.crystaldecisions.reports.dataengine.m.a(SourceFile:173)
                at com.crystaldecisions.reports.dataengine.ContextNode.a(SourceFile:114)
                at com.crystaldecisions.reports.dataengine.ContextNode.a(SourceFile:95)
                at com.crystaldecisions.reports.dataengine.j.case(SourceFile:1080)
                at com.crystaldecisions.reports.dataengine.h.<init>(SourceFile:108)
                at com.crystaldecisions.reports.dataengine.DataContext.a(SourceFile:254)
                at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:4660)
                at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:4574)
                at com.crystaldecisions.reports.dataengine.DataProcessor2.new(SourceFile:2652)
                at com.crystaldecisions.reports.dataengine.DataProcessor2.byte(SourceFile:2610)
                at com.crystaldecisions.reports.dataengine.DataProcessor2.try(SourceFile:2282)
                at com.crystaldecisions.reports.dataengine.DataProcessor2.int(SourceFile:2442)
                at com.crystaldecisions.reports.dataengine.DataProcessor2.I(SourceFile:1013)
                at com.crystaldecisions.reports.dataengine.DataProcessor2.if(SourceFile:4816)
                at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:2020)
                at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:309)
                at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:250)
                at com.crystaldecisions.reports.formatter.formatter.objectformatter.u.a(SourceFile:922)
                at com.crystaldecisions.reports.formatter.formatter.objectformatter.u.e(SourceFile:784)
                at com.crystaldecisions.reports.formatter.formatter.objectformatter.u.for(SourceFile:242)
                at com.crystaldecisions.reports.formatter.formatter.objectformatter.aa.a(SourceFile:64)
                at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:243)
                at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:210)
                at com.crystaldecisions.reports.formatter.formatter.objectformatter.v.a(SourceFile:185)
                at com.crystaldecisions.reports.formatter.formatter.objectformatter.v.a(SourceFile:230)
                at com.crystaldecisions.reports.formatter.formatter.objectformatter.ai.for(SourceFile:359

I'm not sure I understand what you mean by tabbed reporting. Do you mean having multiple reports open at once within the Crystal Reports Designer?
If this is the case, the viewer is designed to only have one report open at a time.

CR2008 Not enough memory while exporting reports from Crystal Reports 2008

I have recently upgraded our Crystal Reports version from Crystal Reports Basic for Visual Studio 2008 to Crystal Reports 2008. After upgradation I am facing the problem "Memory full.OtherErrorFailed to export the report. Not enough memory for operation" when I am trying to export the report from Crystal Reports 2008 Report viewer, or directly from the code behind. The application is hosted application. The problem occurs in our production environment.
Server details:
OS: Windows 2003 Enterprise Edition R2 with SP2
IIS: IIS 6
.Net Framework: 3.5
Application details:
Hosted application using Crystal Reports 2008 SP 3
Crystal Reports Viewer version: 12.0.2000.0
The data binding of the report object is done through an ADODB dataset.
Web.Config:
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<configSections>
    <sectionGroup name="businessObjects">
      <sectionGroup name="crystalReports">
        <section name="printControl" type="System.Configuration.NameValueSectionHandler" />
        <section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
      </sectionGroup>
    </sectionGroup>
</configSections>
<businessObjects>
    <crystalReports>
      <printControl>
        <add key="url" value="http://myserver/mysite/PrintControl.cab" />
      </printControl>
      <crystalReportViewer>
        <add key="documentView" value="weblayout" />
      </crystalReportViewer>
    </crystalReports>
</businessObjects>
<appSettings>
    <add key="CrystalImageCleaner-AutoStart" value="true" />
    <add key="CrystalImageCleaner-Sleep" value="60000" />
    <add key="CrystalImageCleaner-Age" value="120000" />
</appSettings>
<system.web>
    <httpHandlers>
      <add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
    </httpHandlers>
    <compilation debug="false">
      <assemblies>
        <add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
        <add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
      </assemblies>
</system.web>
<system.webServer>
     <handlers>
         <add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
     </handlers>
</system.webServer>
</configuration>
Sample Code:
Report = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
Report.Load(Server.MapPath(strReportPath));
Report.SetDataSource(dsReport);
Creportviewer.ReportSource = Report;
For exporting the report to PDF
string Filename = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.InternetCache).ToString(), Guid.NewGuid().ToString() + ".pdf");
Report.ExportToDisk(ExportFormatType.PortableDocFormat, Filename);
Clean Up Code: (Page_UnLoad event)
if (Report != null)
     Report.Close();
     Report.Dispose();
Creportviewer.ReportSource = null;
Creportviewer.Dispose();
dsReport = null;
GC.Collect();
GC.WaitForPendingFinalizers();
Can someone help me resolve the issue.

The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save. Presumably the 12MB file size is because of the 24bit PNG we have as our background.
The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full". If we export only page 1 of the 3 pages, it also returns a Memory full error. However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything). The process runs up to about 1GB before reporting the memory full error.
We've also tried a variety of other suggestions posted in the other thread with no success.
We're happy to provide the RPT file to the Report Team to diagnose the problem. Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
Our preferred scenario is fixing problem 2. The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size. However, the API reports memory full.
The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing. When executing, it uses up to about 1.1GB before reporting the error.
Are there any other suggestions for fixing what we have? Are there known problems with large images in reports? Do we need to lodge a formal support request?
Regards, Grant.
PS. Grr and my message formatting is lost when I edited this message!!!
There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
Edited by: grantph on Sep 30, 2009 2:49 AM

Cystal reports 2008 conversin caused parameters not to show

Similar Messages

Maybe you are looking for