Cznnot connect to the my yahoo server

I hav had immense trouble with the message "Unresponsive Script". I diaabled my Add Ons and started in safe mode. I still had the same problem.
Today, i was on my desktop computer this morning and then logged off. This afternoon, I tried to start my Homepage. I get the message " Firefox is unable to connect with the My Yahoo server.
I am on my laptop and both computers use the same connection

If you have problems with updating then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Similar Messages

Cannot refresh table - test connection works fine but refresh gives "We couldn't refresh the connection. Please go to existing connections and verify they connect to the file or server." error.

I'm having some difficulty updating a table in my powerpivot data model. The data for the table is stored in a local excel file; if I go to
Existing Connections select the connection and do a test then everything is successful. When however I try to refresh that particular table I get the following error:
"We couldn’t refresh the connection. Please go to existing connections and verify they connect to the file or server."
In the past I had this and it was an authentication issue, the files are stored on SharePoint and I wasn't logged in to Sharepoint - I have however checked this and it can't be the issue because I have other tables linked to other excel files in the same
location that are refreshing without issue. Can anyone think of what may be causing it?
I have even tried creating a new local excel with the same data, added it to the data model and then tried a refresh and I I get exactly the same issue.
Are there any known issues with refreshing data from an Excel file if, after the initial import, you add columns to the table in the excel file I was wondering if this might contribute?
Thanks

Hi Maracles,
Thanks for your post.
From your description, I tried to reproduce this issue on my test environment. However, everything is fine for me. Could you please post the specific version of SQL Server PowerPivot for Excel?
You can try to use a trace file to troubleshoot errors in PowerPivot. If this issue still persists, please try to reinstall SQL Server PowerPivot for Excel to see if this helps.
For more information, please see:
PowerPivot Options & Diagnostics Dialog Box:
http://technet.microsoft.com/en-us/library/gg399091.aspx
Using a Trace File to Troubleshoot Errors in PowerPivot:
http://www.sqlchick.com/entries/tag/powerpivot
Best Regards,
Elvis Long
TechNet Community Support

My phone wont back up or sync to itunes 10.6. i have a windows 7 32 bit laptop. i have tried updating the ios and receive the message saying it cannot connect to the iphone update server please check network connection. any help

have a iphone 4. i have downloaded the latest version of itunes to update the ios. I am having problems with the back up and sync and also the update. the update error message is coming up saying it cannot connect to the iphone update server. I am useing a windows 7 32 bit laptop. I have also reset my phone to factory settings. Would taking it to one of the stores and they would do it for me??
any help will be great thank you

All I can tell you is that I am having the exact same problem with an iPod Touch and that I was running iTunes 9.2.1.5 at the time it happened. Upgraded to 10.0.0.68 hoping that it might help, but no joy.
I don't want to do a restore just now since the Touch seems to be working fine. Restore will have to wait until I have plenty of free time in case something goes wrong.

After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server.

After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server. I have already tried the resetting with power swich and home button and plugging into computer but it says the "iPhone software update server cannot be contacted." I am locked out of my phone. Does anyone have any idea how to resolve this issue and get the phone working again. I will add that I am now trying to restore it on a different computer with a lower version of itunes, but the computer that it initially happened on had the updated itunes and gave me the same result ... nothing. Thanks for your help in advance.

Try going to recovery mode as described here. You may have to try this more than once to succeed.
Use the original iTunes that the iPhone synced with.
http://support.apple.com/kb/HT1808

Issue in creating a connection to the target GlassFish Server .

Hi ,
I am facing issue Creating a connection to the target GlassFish Server.
I am using jdevelepor version 11.1.1.4.0. Here i am trying to create an application server connection.
But in the Application navigator i couldnt able to lcate the (In the Application Server Navigator, right-click Application Servers and choose New Application Server Connection) new aplication server connection.
In the componet palette there is IDE connection inside it the appliction server is present.When i right click on it i am able to locate the New Application Server Connection.
But i am not able to get the the below mentioned steps,
In the New Gallery, expand General, select Connections and then Application Server Connection, and click OK.
In the Resource Palette, choose New > New Connections > Application Server.
In the Create AppServer Connection dialog, on the Usage page, select Standalone Server.
On the Name and Type page, enter a connection name.
In the Connection Type dropdown list, choose:
GlassFish 3.1 to create a connection to the GlassFish Server
Click Next.
Could you please help me on this issue.
Thanks & regards
Binsy

Hi,
So i don't need to configure this manually as per the steps.
Then why i am getting the error when trying to deploy an EAr to glassfish?
Steps which i followed to Deploy the EAr,
1)I have created a ear file in JDEV.
2)in glassfish admin console, deployed the ear by choosing the file from the deploy location.
I am geting eror ..
For one application i am getting
Error occurred during deployment: Exception while loading the app : java.lang.IllegalStateException: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException: oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack.
For another application getting the error,
Interceptor binding contains an interceptor class name = oracle.jbo.server.svc.ServiceContextInterceptor that is not defined as an interceptor.
Could you please help me...

The ITS could not connect to the Web Application Server or the R/3 System

Hi Gurus
we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server" these are working fine for webgui!
and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
the error message is :
Connect Error
The ITS could not connect to the Web Application Server or the R/3 System
any help please
Thanks in advance

Hello Balaji,
Check the global.srvc file for errors in the R/3 system information. The ITS uses the following to connect to your system:
~appserver
~routestring
~systemname
~systemnumber
~logingroup
~messageserver
Which parameters are used depend on how you are connecting (logon group, route string, etc.)
Edgar

ITS could not connect to the Web Application Server or the R/3 System

ITS 6.20 on a single host on a WinXP test machine, connecting to R3 4.6C.
The webgui <u>was</u> working, but a test application created in the WebStudio would not work.
Now it's the other way around, the test application works fine, but the webgui fails with a "The ITS could not connect to the Web Application Server or the R/3 System."
I have not managed to get ../scripts/wgate/admin/! to work either.
Is it possible to have both the webgui and WebStudio created applications, working on the same ITS installation?
If yes, any ideas how?
Many thanks
Tim

Hi Tim,
You have to check the connection data in the relevant service file e.g.
~systemname
~messageserver
~logingroup
~appserver
~systemnumber
~routestring
~connectstring
If the Agate doesn't run you would see an ITS 500 error in the browser.
Thanks and regards,
Dieter

Can't connect to the modem's server.

Hi guys, I have a major problem.
When ever I connect to the internet with my modem, it works. But, when I connect to internet with my router and modem, I can't connect. But I have solved my problem by resetting both, my wireless router and modem. Then after I reconfigure my wireless router all I need to do is to log into my modem's server. But I can't connect to the modem's server. I tired logging in with "admin" (being the password) but I still can't connect to it.
I am using: Verizon Broadband Network
                 Ultra RangePlus Wireless-N Broadband Router model: WRT160N
                 Westell modem model 6100
What is the problem? Has anyone experienced this problem before?
Message Edited by machg on 04-11-2009 07:10 PM
Solved!
Go to Solution.

You will not be able to log into the modem as long as the router is plugged in
You must configure the modem first to bridge mode,then plug in the router and log into it
   1.)unplug router and have only the modem in
       go to 192.168.1.1 enter
      that will take you into the verizon modem/ if you have reset the modem then your user is; admin
                                                                                                                     your password is ; password
     once you lopg into that it will ask you to change the username/password
      just type in ADMIN in all 3 blanks
now you are logged into the modem;;;;;;go to network at the top,then network connections on the left,broadband connection ,you will then put your protocol on bridge/routed bridge,
now go to wireless settings at the top and make sure wireless is turned on
you have the option to set up a security key on basic security settings
once your modem resets then plug in your router,you are now in bridge mode and the modems connection has moved to your router. you must restart modem and computer for everything to take effect....
also make sure and refresh your network list on your laptop
Hope this works

How to establish connection with the outgoing email server?

Cannot set up Lightroom 5 email capability with Google Mail. Have confirmed proper smpt address, email and password and error message still comes up:
"eFailed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
How can I clear this up. Help, Adobe!

Have you checked your Gmail in-box? See if this helps:
https://forums.adobe.com/thread/1642613

I have problem in osx 10.8 i cannot see the encoding option while connecting to the my pc server ?

MR.Eric please help ?
i have problem in osx 10.8 i cannot see the encoding option while connecting to the my pc server ?
this option was in osx 10.6 see it here
because if i create any file in Arabic name from osx 10.8 the others old mac os see it only in unreadable letters ?
please help
thanks

Aw geez, they sure have messed up OSX.
Do you have a backup of 10.8.2?
Maybe...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Cannot connect to the specified SQL Server instance

I am trying to install Microsoft System Center 2012 R2 Virtual Machine Management.
I am getting the following error:
Setup cannot connect to the specified SQL Server instance.
Ensure that the server name, isntance name, and, if speceified, port number are correct. If you are installing VMM remotely, ensure that remote connections are set up correctly, and then try Setup again.
I have installed the
Microsoft® SQL Server® 2008 R2 Command Line Utilities
but have not set up any SQL Server instances.
how should i proceed?
Edit:
The followign fields are configured:
Server Name: The name of the machine i am using
Port: <empty>
Use the following credentials <NOT ticked>
Instance name <empty> (the drop down is empty)
New Database <Ticked> : VirtualManagerDB

Is SQL server is properly installed on the system?
Are you able to connect with SQL server instance?
As per the given details looks, only client utilities installed and trying to create the database which needs SQL server.
Make sure you are able to connect with the "ServerName\InstanceName,PortNumber" and hope installing the system as per below article:
http://technet.microsoft.com/en-us/library/gg610656.aspx
Hope it help!
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Connection to the Ovi Maps server times out

Hi,
I've been having a lot of problems downloading individual country maps using the Ovi Suite. Occasionally it works, but 95% of the time, the download seems to start ("Preparing") but after a few minutes, I get the following error message:
"Connection timeout
The connection to the Ovi Maps server timed out.
Try again."
System: Windows 7, Nokia Ovi Suite 2.2.0.241. My internet connection is fine.
Phone: E52, Ovi Maps v. 3.03
Any advice will be appreciated.
Thanks,
mic

Hi Schorly,
You are right that when you try for maps update, the OVi Suite application connects to the maps server thru' you PC internet connection if you have already connected your PC to the internet.
There is no settings needs to be configured in OVi suite if you have your PC connected to internet already excluding the proxy user name and password entry (applies only if you need to authenticate yourself to the proxy server, leave it blank if not needed) under OViSuite -> Tools -> Options -> General
In the OVi Suite application login to your OVi account on the right hand side top of the window to make sure that your OVi suite application connects thru' your internet connection.
In case if you still have the issue of connecting to the maps server, you may have to re-try later as the server might get timed out due to overload
Regards,
Diwa
If you like my post, kindly acknowlege the same by giving a kudos to me

How to connect to the Crystal Reports Server XI R2 installed in other machi

Hi,
we are 3 people here we have Crystal Reports Server XI R2 installed in one machine and Crystal Repoprts XI DEsigner ( downloaded trial version) in all the machines ,
in my machine only Crystal Repoprts XI DEsigner ( downloaded trial version) is installed , how to connect to the Crystal Reports Server XI R2 which is installed in other machine
Regards,
kathyaini

Hi,
thankyou for your response,
my problem here is as soon as i open CR Designer , and if i click on either New Report,Blank Report, or standard report wizard it is saying "failed to create database connection"
on which ever thing i click it is telling the same "failed to create database connection" i created the user DSN properly , i could not create System DSN i dont know why.
can u please guide me
and one more thing on the machine where CR server is installed , on the same machine designer is also installed (i think u was telling the same) . my question is how the server will know about the CR Designer installed in my machine.
Regards,
kathyaini

Setup cannot connect to the specified SQL Server instance

On a clean install domain member (Windows 2012), I am trying to setup System center 2012 VMM:
1. I installed the prerequisites as instructed during the pre-setup phase of the installation then rebooted the server (SQL Server 2012 was installed and services seem to be all started properly and SQL Configuration Manager starts as well).
2. After reboot, logged again with domain admin account and Windows update installed right away SP1 for SQL server 2012. Then I rebooted again.
3. Restarted the installation process and left default values. At the "Database configuration" step, I am leaving everything by default as well and I am getting error: "Setup cannot connect to the specified SQL Server instance. Ensure that
the server name..."
4. Tried different credentials, tried using port 1433 with no effect.
Am I missing something????
Thanks.
Benjilafouine

Definitely be sure to connect with the "ServerName\InstanceName,PortNumber". If you don't reference a port number it will try 1433 and then will connect via a dynamic port number. It is best in my opinion to always specify a specific port for each instance
to listen on in the SQL Server Configuration Manager so that you can open the fewest number of ports in the Windows firewall.

Unable to connect to the remote ftp server using dreamweaver.

For the last one week I have been trying to connect to the remote ftp server using dreamweaver. I spoke to the technical support agency who manage our remote server but they are saying that there is no problem with the server adn they dont know anythign about dreamweaver so cant assist me.
I was suggested to check with adobe team directly and i spoke to a technical support person on the live chat but they said since the version is CS4 - education version, they cant assist me at all!! This is just ridiculous...I am constantly being sent from one place to the other without anything getting resolved!!
Please help somebody!!

I am having a similar problem... maybe. I was connected to my remote site all day yesterday, then out of the blue I tried to "put" an edited file... as I had been doing all day, and I received an FTP error: Cannot make connection to host. Your login or password is incorrect. That's odd, I've been connecting all day. So I went into my sites > manage sites and clicked the Test button on my remote server information and it returned Adboe Dreamweaver CS connected to your webserver successfully. I went back to my file and tried once more to "put" it on the remote server... again FTP Error: cannot make connect to host... So I reboot my computer and start Dreamweaver CS3 again. I reenter my remoter server information and click the Test button. "... connect to your webserver successfully". I try to put any file, FTP error again. So I call my server administrator, he checks the servers logs and says there are no errors and you've connected successfully several times today. I went through the trouble shooting steps listed here, though my FTP Logs are empty. I cannot stay connected or even see the remote folders to try to drag and drop. I tried to run ftp from a windows command prompt and it seems to connect me.
I downloaded an installed an SFTP client and was able to successfully connect to my remote server and upload the files. It's definately a Dreamweaver problem. Any suggestions?

Cznnot connect to the my yahoo server

Similar Messages

Maybe you are looking for