D 110 printer puts a white line on scanned images

D 110 printer puts a white line on scanned images. Not a glass problem. Have reinstalled software with no improvement

I hope you are doing well and welcome to the HP forum;
If you are using windows xp or later please run this utility to see if they are CLICK HERE
You can use  this article for additional troubleshooting GO HERE  although you mention that you did some of the recommend steps it will not hurt to follow the article and do them one more time. 
Hope this helps and if you need further assistance please let me know I will do my best to assist you.
Hope this helps;
RobertoR  
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

  • HP7680 inkjet printer prints narrow blank (white) lines in multiple specific parts of page

    My HP7680 inkjet printer prints narrow blank (white) lines in multiple specific parts of each printed page. It appears to happen in the same parts of each page printed.
    - I installed new ink cartridges
    - I verified that the paper I’m using is the standard inkjet paper that I always use
    - In the tools section of the printer setup menu, I ran the “Clean Printhead”, “Align Printer”, and “Calibrate Linefeed” options
    - In reading the printer’s manual, it seems to imply that the printheads could be the problem.
    - So, I manually cleaned the printhead contacts
    - When I print the self-test diagnostics page, it shows printhead health to be “Good” for both. One of them was installed in January of 2009, and the other was installed March of 2008.
    - With a Q-tip, I even cleaned the clear plastic band that runs parallel to the carriage rod. (It was pretty dirty.)
    Here's a scan of the printed output.
    Thanks for your help!

    After a 2hr phone call with tech support, here is the solution; the L7600 Series printer have a firmware update (file name: OfficejetProK7600_R2011PxN.exe) my printer was bought in 2008 thus my print head is a 2008 model, and new print heads are a 2011 modem, they don’t work right in a 2008 model this is PER the tech rep and his name was John unless you upgrade the firmware.
    So I upgraded the firmware from a 2004NxN to the 2011PxN and now my printer says damaged or missing print head, I place the original print head from 2008 back in the machine and it’s fine, so I bought a 3rd print head for 2011 and it says the print head is damaged.
    After another 30min or so I was told I have a bad printer and sorry the warranty is out, but the old print head works but any new print heads do not, this sounds like a HP Error firmware / hardware compatibility issue, not my issue, but HP will not repair.
    HP has no fix nor will they repair the printer.

  • Strange stiching white lines in placed images...

    Hi,
    I'm having some problems with Illustrator CS2.
    When i place a .PSD file (1 layer, photo, transparent background) with 300 dpi / CMYK 8bit into my main page, i get these strange stitching white lines over the image.
    Not only that, but after working on my arrangement some more, if i click my placed image, i notice how Illustrator has sliced it into 2 or more parts..
    This is annoying, since getting those white stitching lines doesn't really make me safe for print, and also bothers me that Illustrator slices the image into 2 or more parts without asking or confirmation.
    Anyone knows how i can fix this problem?
    Thanks,
    John

    Hi,
    I'm having some problems with Illustrator CS2.
    When i place a .PSD file (1 layer, photo, transparent background) with 300 dpi / CMYK 8bit into my main page, i get these strange stitching white lines over the image.
    Not only that, but after working on my arrangement some more, if i click my placed image, i notice how Illustrator has sliced it into 2 or more parts..
    This is annoying, since getting those white stitching lines doesn't really make me safe for print, and also bothers me that Illustrator slices the image into 2 or more parts without asking or confirmation.
    Anyone knows how i can fix this problem?
    Thanks,
    John

  • White Lines appear on Images in Adobe Photoshop CS3

    White Lines appear on Images in Adobe Photoshop CS3
    Recently discover that on three different computers, while editing images in Adobe Photoshop CS3, white lines would appear on some of the images.
    For example changing a image from a .jpg to a .psd or size, or enchantment features, the white lines would appear on the image.
    The lines did not appear on any of the printed images, any suggestions.
    Monitor: Sony Trintron Multiscan G4110
    Computer: Mac G5

    >The lines did not appear on any of the printed images,
    Although it is odd that three computers exhibit the same problem, and unless you can provide other coincidences (same files, same monitor, etc.), I agree. The video card is typically the culprit IF the image anomalies don't print and if they move about with each image resizing or opening of a specific image. Check to see if it's properly seated and connected. Same for monitor cable. Try swapping in another card.
    One other thought: as this is a CRT monitor, what happens if you change the resolution and refresh rate? Are you using a recommended combination for that monitor?
    Neil

  • Whats the easiest way to put a thin line around an image?

    Can anyone tell me the easiest way to put a thin line around
    an image? I'm also interested in the use of thin lines as part of
    the graphic design on a page, how are they generated?
    Thanks

    .oO(cdeatherage)
    >In Dreamweaver, you can set a border for each image but
    be aware that some
    >versions of some browsers may not display it.
    This shouldn't be an issue in any used browser today.
    >If it is a consistent look you're
    >after, I'd say the most permanent thing to do would be to
    edit the image in
    >Photoshop or Fireworks. In Photoshop, e.g, I'd create a
    background fill with
    >the color I wanted the border, then add the image,
    centered, in a new layer on
    >top of that. Merge the layers, then save optimized for
    the web.
    Way too complicated. If you want to change the color or style
    of the
    border, you have to modify the image. With CSS you can
    directly change
    the line style in a much easier and faster way.
    Micha

  • When a pdf is taken from illustrator, white lines appears on images. How can be avoided it?

    When a pdf is taken from illustrator, white lines appears on images. How can be avoided it?
    I use illustrator cs5. It occures mostly on the cover pages of brochures which contains images, texts and some effects such as drop shadow etc.

    Thanks for your reply.
    When smooth line art is turned off in Acrobat preferences,the lines disappears but the text becomes raserized and goes its smoothness. Not only that, we are not sure that everyone who is viewing the pdf has the same settings in their laptop or desktop.
    Is there any other solution to remove these lines? I have added the screenshot of a part of the pdf.
    Thanks once again for your support.

  • Print Booklet with White Lines Issue

    I have searched low and high on this forum and the internet for a solution, with no luck so far. I'm hoping that you InDesign gurus can help!
    Whenever I use the 'Print Booklet' feature to generate a booklet from my InDesign CS5 brochure, the output has thin white lines in various areas that should NOT be there. The lines mostly show up in areas where I am using transparent PNG files, but there are no effects on the layers for these images.
    This is an odd problem because:
    In the original source while viewing it there are no lines
    I can print to high resolution PDF using the standard print features and everything is 100% perfect, no lines
    I can export each page as a high resolution JPG and everything is 100% perfect, no lines
    The lines ONLY appear when I use the "Print Booklet" function. I have tried many things that have not worked:
    Changing virtually every setting in Print Booklet to something else, lines are still there
    Printing to a PDF directly from 'print booklet' with many different settings, lines still there
    Printing to a PS file from 'print booklet', lines still there
    Printing to an XPS file from 'print booklet', lines still there
    I've put up an example showing you two different outputs. The one on the left is a regular JPG export, the one on the right is the Print Booklet export. Click on the images to see a larger example:
    http://www.seenbest-web-design.com/techclub/?p=1282
    I've seen other people post about this problem elsewhere going as far back as CS3, but have never found a cause or a way to fix this. Some people have said 'it's just a rendering issue in Adobe Reader, and the lines will not actually appear when you have it printed'. However, when I go to print from my PDF file to my printer the lines are there in the output. They are also there when I print to a XPS document and view the image on the screen.
    Any ideas?

    It's a transparency flattening artifact called Stitiching and basically, becasue youare printing to PDF you're up the creek. It only happens when transparency is flattened, but printing to PDF is a distiller function, and distiller doesn't support live transparency.
    The best way around this, I think, would probably be to use an imposition script to impose a copy of the file, then export spreads from that using Acrobat 5 or higher compatibility, or, if you need to do this a lot, look into a PDF imposing plugin -- Quite Imposing gets good reviews here.
    If you want to go withteh script, may favorite is Dave Saunders BuildBooklet javascript (http://pdsassoc.com/downloads/Buildbooklet.zip) but it has some limitations, no creep, 2-up saddle stitich only, and no objects crossing a spine. Slightly more sophisticated is his MakeBooklet script (Dave's CS3 Booklet Script) but it is still a lot less versatile than an impostion plugin.

  • Printing borderless leaves white line at bottom of print

    Hi,
    being frustrated with the PS CS3 off center printing issue, I now try to print my pictures out of LR. But here, I have a problem printing borderless as well: Im am using an Epson 2400 on an IntelMac running OS 10.4.10.
    E.g. when I want to print a borderless 4x6 print, already the LR preview indicates that there will be a white line on the bottom of the image. This is then confirmed when I print. Same for other print sizes. I set all margins to zero in LR, chose borderless in the printer driver... I tried to trick the software by creating a custom paper size, but so far, nothing helps.
    Is this an LR flaw?? ( I am running LR 1.2)
    Thanks for your ideas.
    Anne

    Hi,
    I finally got a workaround, if someone is interested: I wrote myself the following instruction now:
    Avoiding white line on bottom of LR borderless prints:
    for 4x6 prints:
    Page setup: choose 4x6 sheet feeder borderless
    Create a custom paper size: 4.00x6.02 (6.01 does not work) with margin ON TOP of 0.01 in, save as "4x6 borderless"
    In the printer driver menu choose "Paper Handling" from drop down menu. Click the Scale to fit paper size and choose the new custom size "4x6 borderless".
    The expansion is set to maximum, but since this method worked, I have not tried to reduce the expansion in order to see what the effect is. (I have wasted already enough paper and ink)
    The prints now don't have a line on the bottom anymore.
    The white line on the bottom of the print preview in LR, however, is still visible.
    Anne

  • Why are white lines appearing in images in PDF files but not the original InDesign files?

    Hi folks!
    Let me just start out by saying that I'm not a graphic designer and have basically no experience with graphic design programs, aside from the little futzing around I've tried to do with InDesign. My company (which publishes a monthly magazine) has decided that it would be a great idea to get the files to our magazine from the graphic design firm that actually handles the production end of things so that we may offer back articles, etc., and modify them as needed. Somehow I've gotten assigned the task of handling this. However, I've encountered some problems along the way. The graphic design firm uses Quark, we own InDesign (CS3) and use Markzware to convert the files. Most things seem to work okay in this arrangement but I'm having problems with the images in the file when I create PDFs. Although the images look fine in the InDesign files (and are of print quality), when I create PDFs of some files, thin white lines appear over the images in the PDF document. I asked our graphic designer about this but she has no idea, and she isn't very familiar with InDesign.
    So, my question is, where are these lines coming from and how do I stop them from appearing? As a reminder, I'm not a graphic designer and am fdairly ignorant in design software terminology. If you're kind enough to try to help me with this problem, I'm going to require an explanation in plain English. Basically explain it to me like you would to a 10 year old.
    If anyone can help, I'd greatly appreciate it!
    Thanks in advance,
    Lynn

    I think Bob was typing too fast and meant to ask if you were distilling, not to tell you distill.
    Distilled PDF (you get distilled by printing to PDF rather than exporting) always flattens transparency, which is what makes those white "stitching" lines.
    You can make the stitching disappear on screen by turning off smoothing in the Acrobat prefs, and it shouldn't print on a press, but it sounds like you may be doing the output on a digital machine and it's likely to show on the lower resolution output.

  • White lines in *.SVG-images

    When I'm placing a *.SVG-image in Muse, I get a thick white line in the bottom and a thinner white line to the right in the placed image. These lines kan not be removed in Muse. What do I do wrong?

    For now the only fix is this choice:
    1. Register for Adobe's beta program, sign a NDA and then see if the beta of Muse fixes SVG issues.
    2. Wait for the next official point release of Muse.
    Muse 2014.2 was released in early October. I'm wondering when "2014.3" will be released. Previously a lot of the point releases came every 2 or maybe 3 months. We're now at four months and counting between point releases. That's kind of a long time to wait for getting a pretty obvious bug fixed, such as the white underline problem in SVG images. I thought Adobe's engineers would have addressed that one pretty quickly.
    Sidetrack:
    I can only guess what's going on behind the scenes at Adobe. Perhaps they're making some pretty big, fundamental changes to Muse to make the application a whole lot better. I hope Adobe's engineers aren't getting sidetracked by armchair quarterback nonsense coming from stock investors. Creative Cloud subscription numbers are rising, but Adobe's margins have been shrinking, in part because of lots of research & development (good for us users). So lots of stock buyers are telling Adobe what they need to do, and some are suggesting they put a lot more of their resources behind sales and marketing tools. Adobe announced a $2 billion stock buy-back program in January (after finishing the previous one). Investors are very impatient. They're complaining about the hit to revenue over the transition from boxed perpetual license software to a subscription only model. The investors don't understand creative professionals are literally going to get forced onto Creative Cloud as they get rid of older, slower computers. They also don't seem privy to Adobe's growth in some other niches, like video. Premiere Pro has been surging in popularity at the expense of Final Cut and Avid. It reminds me of how InDesign rose to dominate Quark Xpress.
    I don't like having to pay a subscription for Adobe applications, but for my work I am stuck with it. Adobe doesn't have enough credible competition to change that. And Adobe's competitors are trying to jump on the subscription model too.

  • White line on small images

    I inserted some small images to act as link-buttons. For some reason, some of them display a white line on the top. See the apple logo for instance here: http://kojema.net/cs/siteinfo.html
    and the green buttons here: http://kojema.net/cs/audio.html
    I used the same green button image another place, and there it did not display the white line. I used Aperture to crop the original images, and then simply dragged them into iWeb. What is causing this? The lines aren't visible in iWeb. But after I publish the site. there they are.
    Thanks.
    P.S. Is it just me, or does Firefox cause an enormous loss of color in jpegs?

    There are a few solutions to the problem, see my post in this thread:
    http://discussions.apple.com/thread.jspa?threadID=525470&tstart=0

  • HP Officejet 7000 Wide Format printing black AND white lines on photos

    I am having some serious problems with my officejet 7000. I have contacted HP and have went through all the steps required (although all they could do is send me a new head and cartridges to help remedy the problem). This however has failed. Let me give a quick example of my problem. Although these 4 images are different in almost every way, they are printed on the exact same paper lol.
    <img src="http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/298​367_2181658093219_999934383_32331922_448499237_n.j​...">
    The bottom two 4x6 are on HP Premium Plus photo paper.... Not cheap, and being wasted daily, trying to get this thing to print...
    I finally had a break thru when I printed bordered on my 4x6 AND 8x10's.... The printer will work and print flawlessly on a bordered picture... This does not help me when the customers want a borderless picture though. When it is printing a borderless picture, it seems to be rushing through the process, but when it is printing bordered, it takes its time.... any ideas as to how to fix this?
     It is a Windows 7 system. Ive tried wire and wireless printing to rule out communication failures. Which also concluded it is not software related due to reinstalling software for wire and wireless.
    Sorry to rant, just getting fedup with what could be a great printer......
    One more thing... Why cant you print 11x14 on a 13x19 page?!(no option for it  )

    Sorry to hear about the issue you are facing.
    There is an updated print driver for your product which was released:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3883​...
    Check if this newer print driver helps.
    To answer your other query about selecting a different size media vs inputting different size, the printer actually does not allow it to protect it from overspray on the carriage.
    I work for HP.

  • Wierd printing problem.  I have a TIFF file from a color negative scanned some years ago into Photoshop. Photoshop version probably CS2. Now printing from CS6. It prints with a black line around the image and mid grey outside that. Margins are white. Imag

    Any suggestions as to how to fix this, please?

    My printed colors look wrong. | Mylenium's Error Code Database
    Mylenium

  • White line cutting off image in Ken Burns effect

    Hi I have multiple layers in a clip-- White background, photo with some white background as well, some text. When I apply Ken Burns to get a little movement, all of the sudden a white bar appears up top and cuts off part of the photo.  Where is this coming from? There's really nothing above the photo that I can see in the layering of all this?  Thoughts?
    Thanks so much!
    ClemKins

    Are you editing inside a clip timeline, or on a project? What are you applying the Ken Burns effect to? The whole clip, the photo?
    Please post a screenshot of your timeline, viewer and inspector, to see exactly what you are trying.

  • Why the White Lines around imported Photoshop Images

    Working in CS6, importing native Photoshop images into an Illustrator gradient.  Certain imported Photoshop images, with transparent background, produce white lines bordering the images.   The white lines stand out against the AI gradient.  The whites lines are not visable on screen.  They came out in the commercially printed product.  The overall AI document, with PS images placed and linked, was save to a PDF.  It was then printed from the PDF. The PDF, as viewed on screen, does not show the white lines either.  Why and how do the white border lines (the box surrounding the image) appear?

    First I would recommend making sure there are indeed »no pixels« there in Photoshop – applying the Layer Style Stroke can help locate stray, semitransparent pixels.
    Other than that I am afraid your print service provider may not have provided optimal output.
    What print process was employed anyway?
    It looks like flattening effects, but those should simply not be visible in print.
    They happen when exporting X1 or X3 pdfs, which disallow transparency, so in creating the pdf the psd files that have transparency are flattened with whatever background and often broken up into smaller parts.
    That way a whole mess of fragmentary images can be created, as one can see when one opens such a pdf in Illustrator.
    One can avoid that by creating X4 pdfs, which do allow transparency, but if those can be processed by the printer is another question.
    But this issue might be more suitable to the Illustrator or pdf Fora.

Maybe you are looking for