D-braket LED 1 and 4 are red

i have the K8n plat. and i turned on the computer after i installed my liquid cooling and nothing at all, my pump and fans turn on and all i get are the d-bracket LED 1 and 4 are red. CPU bad? CPU initialization is where it hanges.
my stats are
MSI K8N neor2 plat.
AMD64 3800+
geforce 6800GT
1.0gig OCZ value ram(new ram not in yet)
2 HDD
CDrom
DVD-burner
antec true power 480watt
let me know what you all think.

Quote
Originally posted by brono85
Hello all
Today I received my mobo from RMA I put together ouside the case motherboard, processor, video card and the first boot I got the logo screen and nothing. The led on the D-braket are 1/3 are RED and 2/4 are Green. I tried to clear the bios with the jumper but nothing change, also I tried the bios recovery it gave me 5 bit and nothing.
What should I do next?
They did not replace my mobo I got the same one and I don't know what they do to my motherboard. On the sheet it said "Error code: U0H" "Repair: N01" any ideal what kind of repair they do?
Need your help Thank you
Hi,
Do MEMTEST 1st.........
EDIT: 1/3 RED is mem error......
Also 1.7 is best BIOS update, I have used stable with this mainboard.
Will watch thread for replies.
Del

Similar Messages

HT201272 What is it with songs that are not from the itunes store, but are coming from cd's and other download sources that all of a sudden do not play on my iphone and have a red stop button in a red round circle around them, behind the title?

Songs that I have had previously downloaded from various other sources, but NOW ALL of a sudden they DO NOT PLAY on my IPHONE and DISPLAY a RED STOP BUTTON in a red round circle next to the title. Everytime I click on it it DOESNT play. What happen???? How can i get them to play., Why should i have to pay for the songs, and why are they in the ITUNES store and not in my regular playlist.

Amazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
http://support.apple.com/kb/HT1535
Please let me know how things are going.
Cheers!

Help with Loops!! All loops are RED and unclickable after Leopard upgrade.

I may need to just remove soundtrack pro from my computer and start from scratch again. When I upgraded to Leopard I failed to select preserve user settings when I did an archive and install. So therefore I had to find and drag files to the new library. This is on my Power Mac G5.
I have a Macbook Pro laptop and I used that as a guide of how I have that set up. On my G5, I have all my loops in the same folders they are in on my laptop. When I open STP, and pull up my loop files, they are all listed in red. When I try to click on them, nothing happens.
I have them set up as MAC>Library>Audio>Apple Loops>Apple Loops for Soundtrack Pro, Apple Loops for GarageBand, PowerFX Loops
I am not sure if I am dealing with a bunch of corrupt files and need to start with a new slate or what.
I also noticed that most if not all the audio loops end in .CAF instead of .AIFF in the folders. However when STP is open, the files ARE listed as .aiff files but they are red and non clickable.
Any suggestions appreciated!
Thanks!
Message was edited by: DVX100Shooter
Message was edited by: DVX100Shooter
Message was edited by: DVX100Shooter

Yea once I rearranged the loops and then opened STP and then Indexed those loops, I got everything back to normal except my Trumpet files. I cannot locate them anywhere. There are only 4 loops but I searched my HD and still can't locate where they are but I got everything else back to working.

The music on my iPhone 4 with the new ios7 is not working. There are red dots next to the selections and I can not here any music when I touch the spots. I just downloaded the iOS 7. What went wrong? Everything else seems to be fine

The music on my iPhone 4 is not working. There are red dots next to the selections and no sound occurs when they are touched.

Can you play those songs in iTunes on your computer?
Make sure they are all part of your iTunes library before you sync and that they were bought with the same AppleID you use on your phone.

648 Max no booting (all leds are RED)

Hello,
I use my 648 Max mother board for 2 year with :
- P4 @ 2,4 Ghz
- two PC2700 DDR 512 Mo
- the D-Bracket 2
- two hard disk
- a nvidia g-force 2
- a lan pci
- sound blaster live! 5.1
Since yesterday, my computer don't start (whithout hardware change) : All D-Bracket 2 LEDs are red.
Is just a mother board problem or the problem can be provided by an another component (like processor, ram, ...)
Thank you
Damien

try clear CMOS. Try your CPU on other motherboard. Try other CPU on your motherboard.

HT3805 thumbnail looks fine but upon opening picture it shows 75% complete and then dark areas are blue and some white areas are red, a new issue

a new issuefile://localhost/Users/rsg51/Desktop/Screen%20Shot%202013-04-11%20at%204.1 2.56%20PM.pngScreen Shot 2013-04-11 at 4.12.56 PM
thumbnail looks okay but upon opeing file jpeg or raw does not load completely. shows red in the light white areas and blue in dark areas.pictures open between 70-95%. reloaded the application.. pictures do open on mac book pro. this is an imac

Sounds like you have Highlite Hot and Cold Areas set. See the View menu

Some SPAU object are red can I leave thm alone and not include them in SPAU

I have ran through SPAU and all are green checked except for 3 which are red or yellow.
I was told these object are only for the Build environment (DV1) or development and will not move forward.
Can I leave them out of SPAU altogether without adjusting them? and since these objects are local and not moved to integration or production will it matter to even process them?
Thanks
Jex WF

Hi,
I believe you can ignore those objects since it's local.
but any way better to discuss with the developers whether they intentionally cretated those requests local.
and more over they will verify the customization whether it needs in PRD or not. if not then you can ignore and go ahead for creating Transport request for the remaining objects.
Regards,
Srinivas.Korva

I have downloaded an album through itunes and there are 4 songs that have a cloud with a red arrow pointing downwards, when I click on it it says unable to download at this time. Why is this?

i have purchased an album via itunes and there are 4 songs that have a cloud with an red arrow pointing down, when I click on it it says unable to download at this time. Why?

I'm not sure if they could tell you but you could try contacting Apple for assistance by going to https://expresslane.apple.com, then click iTunes>iTunes Store>Purchases, Billing & Redemption. You will need your serial number, which you can find in Settings>General>About.

Is it possible to have two different DIO such as DIO 0 and DIO 8 to control 1 LED provided both DIOs are both true?

is it possible to have two different DIO such as DIO 0 and DIO 8 to control 1 LED provided both DIOs are both true? If so, how do we connect the 2 IOs tothe LED?

Why use two DIO lines? If they aren't doing anything else, just AND the signals in software and just use 1 output.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

K9N2 SLI Platinum/ All 4 lights on motherboard are Red

Specs are.
9850 AMD Black Series
600 W PSU OCZ
1066 Ram OCZ Platinum Series 4 gigs
BFG 9800GTX OC 512
OS- Windows XP s3
Problem I have is the manual i got is Multilingual and not very helpful, but what happened is a breaker in my house tripped and cut off power, and this happened while I was gaming on-line. Reset the breaker, turned the computer back on everything boots up fine but all the led lights are red, 4 total. Everything seems to be working just fine, didn't know if it was anything to be worried about or not. Thanks for any replys

Didn't know that I would have to update the BIOS if I wanted the 1TB HDD support. Thanks for pointing that out.
Quote from: Scooter71 on 31-January-09, 05:38:58
I didn't know if I should update the bios or not. IM on bios 3.2 and 3.3 is for updated CPU module, Support for 1000GB HDD and Support for L2 Function. So should I or not i guess is what im asking with me having the 9850 AMD Phenom is all. Thanks for any replys...

Curve 8310 and perl 8100, red light blink

Both phones have the same problem, dont start, my computer doesnt reconize. and when get conected the red ligth blink in the secuence 3 blinks, pause, 2 blinks... and repeat.
helpme please.
im using windows 7 x64 with Blackberry Desktop Software 6.
i can give any other information.

If your BlackBerry stays powered off with a black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New music will not sync to my iPhone 4, and music that was previously synced but was added to library through a CD will not play and has a red square and is grayed out.

I use iTunes on my family iMac, my iTunes, I believe, one update below the current software any my iPhone is on iOS 7.0.3. Music purchased through iTunes syncs correctly and will play properly. Songs that I have obtained through CD's, however, are now grayed out and have a red square with a circle around it. When I click on the song, it will cycle through my library until it can play a song. iTunes will also not restore songs that I have removed from my iPhone but are in the cloud. Is there any possible way to fix this issue? Everything has been working fine until iOS 7 and the new version of iTunes. Thank you for your time!

I am so relieved to hear that I am not the only one experiencing this! However, I am sorry to hear you are going through this as well. Lucky for me I am upgrading to a 5s which will be sent to me on Wednesday. I did stumble upon an article with tips on how to downgrade back to iOS 7, but I am EXTREMELY apprehensive about doing that myself. Here's the article link if you want to give it a go:
http://osxdaily.com/2014/09/21/downgrade-ios-8-back-to-ios-7-1-2/

Why will IMAP email not send from Mac OS 10.10.1 Yosemite Mail even though it is configured the same as on my old Macbook (and emails are sending just fine on the old computer)?

I can receive but cannot send IMAP email on my 1&1 mail account from Mac OS 10.10.1 Yosemite Mail on my new Macbook Pro. The account is set up the same port, password, username, server name as on my old Macbook and emails are sending just fine on the old computer.
When I hit send on the new Macbook Pro running Yosemite I get this message:
"The connection to host ... on port 993 failed.
Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent."
It shows the server as (offline)
I've tried erasing and typing in the password. I've tried both checking and unchecking Automatically detect and maintain account settings. Still cannot send.
I also have a Gmail account and it is working...

email service uses an Incoming Server and an Outgoing Server. Mac Mail makes access to the Incoming Server(s) obvious, and hides the settings for the outgoing Server(s). A quick and easy way to get access to the Outgoing Servewr settings is to use:
Window > Connection Doctor ...
... then click on the red light for the Server that is not working for you to see its settings.
This web page will make an educated guess about how to set up your Servers, and NO SPAM will follow:
https://www.apple.com/support/mail-settings-lookup/

My iPhone no longer alerts me when I have texts, even though all my notifications and sounds are on. Can I fix this?

My phone no longer chimes when I have a new text message. Or, alternatively, it will chime when I unlock it, even if I received the message hours ago, but won't alert me when I actually receive the message for the first time. My software is updated, and all my notification sounds and alerts are on. Often it registers that there's a text message (there will be a red circle above the app), but the notification never pops up. If I do immediately get an alert, it doesn't complete the chime and my phone flashes but immediately shuts off. Is there some way that I can fix this?

Sorry to know that..
After backing-up your data try a Factory Restore. also check whether the phone Firmware upto date ? You may check using the Nokia Suite .. If not you may update that or if already with the latest Firmware re-install the Firmware and try again ..

I had completed my iDVD project and burned a disc. It worked great! Then someone messed with the project and put a red frame around the opening screen. Now when I burn the project, it no longer has the opening frame. How can I fix?

I had completed my iDVD project, a Wedding Slideshow with pictures and music, and burned it on a disc. It worked great! Then someone messed with the original project on my computer and clicked around and put a red frame around the opening screen that has the Wedding theme with music. Now when I burn the project to make more DVDs, it burns but no longer has the opening frame. It immediately opens to the iMovie slideshow. How can I fix so I can burn the entire project with opening frames?

As Bengt suggested make a disk image of the successfully burned DVD using Disk Utility. Then you can burn copies any time you need one.
In the future once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
You can then burn it to disk with Disk Utility at the slowest speed available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

D-braket LED 1 and 4 are red

Similar Messages

Maybe you are looking for