D-Link device isn't powering up

I've used a D-Link device for over a year with much success. After recently purchasing a new Mighty Mouse with my G4 iBook,. my D-Link device now fails to light up. I'm running OSX 10.4.7. Have tried rebooting the laptop but still no luck - with either USB port. Any and all ideas are welcome.

Sounds like your iMac has serious hardware problems. You best would be to take it to Apple and ask them to repair it.
Your iMac is not a PPC. It is an Intel iMac. Apple stopped produccing PPC in 2006. I will ask the Mods to move you post to the correct forum.
Allan

Similar Messages

  • Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

    Not able to sign into Blackberry Protect.  Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID."  My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone.  I can sign into Link, Blackberry.com and Protect.  I see my device in Protect but cannot send messages or view it on a map.  Times out with cannot reach device message.  BB Protect on Device has a swirling circle beside the on/of switch.  Cannot turn off.  
    I have deleted Link and re-installed.
    I have reset phone to default(factory) and signed in. 
    OS level is 10.2.1.3062
    BB Link is 1.2.3.56
    Solved!
    Go to Solution.

    I managed to figure this out myself. I had to delete the device from the Blackberry Protect website.  protect.blackberry.com.  I wiped my device again and signed in with my Blackberry ID.  I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete.  Restore is in progress for me!

  • Error while burning dvd in pre 8.0 "device error-the target device isn't suitable for use."

    I am trying to burn a dvd in premiere elements 8.0 but after 96%  iam getting this error :
    "device error-the target device isn't suitable for use."
    I have tried all of these steps according to this link :http://kb2.adobe.com/cps/515/cpsid_51553.html.
    System configration :
    win vista 32 bit .
    Processor :Amd athlon 64 dual core 2.60 ghz .
    Ram :3 gb
    Graphic card :nvidia geforce 6150 se .
    Camcoder model number  :JVC gz-hm320.
    Format :.mts
    Frame size :1920/1080
    Frame  rate :29.97.
    Please look into this problem .
    Regards
    Manoj Khati

    This is a user to user forum, not Adobe support... YOU look into things, based on advice other users are able to give
    Things and Software to AVOID when authoring/burning a DVD
    Read all links/sub-links to create a "best" burned disc
    Start --> http://forums.adobe.com/thread/608660?tstart=0
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus a Microsoft note http://support.microsoft.com/kb/314060
    And another note http://support.microsoft.com/kb/982116

  • Device isn't eligible for requested build - ipod touch 3rd gen

    I have a 3rd generation ipod touch running ios 4.3.2. When I plug in my ipod into my mbp itunes says that a new version (4.3.3) is available. The problem is when it tries to verify the update with apple it returns an error message stating the device couldn't be updated because the device isn't eligible for the requested build. Is there anything specific that I need to do?

    Download the latest version iOS for your model and install it manually, as outlined in link below.
    Basic troubleshooting steps 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • HT201274 getting device isn't eligible for requested build message

    Trying to restore IPOD Toch after forgot password.  Get the message device isn't eligible for requested build message

    Download the latest version iOS for your model and install it manually, as outlined in link below.
    Basic troubleshooting steps 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Itouch locked up on window 7 iTunes[8143:10e2b]: server error (94): This device isn't eligible for the requested build on mac 10.4

    Itouch was plugged into new window machine  moving from vista to window 7 and froze with itouch window showing the itune icon and usb cord photo on screen.
    It will not reset with off and select button holds.
    does not show up in the directory of windows vista or 7
    does not show up in Mac directory or disk utiltity window
    will try to go to restore on mac  but I am still at 10.4.11
    and i get the computer screen message:
    iTunes[8143:10e2b]: server error (94): This device isn't eligible for the requested build.
    and got a couple of pages of dianostic stuff when clicked on ask for details
    ipod did show up in mac itunes window until it gave me the "go away" message, but the only choice it gave me was to update the ipod software
    I do not need to update the os on my mac mini   I am happy with it for as long this it lasts
    Any help here would be greatly appreciated
    oh and when I seached this discussion data base  I came across a couple of links of try this
    But  the link took me you I am not authorized....sigh
    Any ideas???
    Thanks
    Barry

    Thanks for your advice  These apple forums have kept me up and running for years and I really appreciate the time you and others take with me.
    I have followed one of your links to print cnfig in a run box and go down that path  but it would not allow me to exit and restart without choosing quit On restart  there was a cheer of hope from me   apple found in itunes and it showed up in the device and printer window  but after 10 min or so of restore it said it is stuck in recovery and I must fix that issue first
    Yeah  Bite my tongue   did a second restore attemp and it syn'd to my itunes!!   I put on the old tune do you believe in magic  and it is playing!!
    Great Scott   Now I can give it back to my daughter to set up on her account!!
    Saved  Thanks so much for your time and expertise!!

  • Linked devices

    I would be very grateful for some help please. I have a BB Q10. I've been trying to install the latest version of BB Link on my laptop. At one point in the process, I get a screen that reads "LINKED DEVICES This BlackBerry ID isn't associated with a device running BlackBerry 10 OS or there was an error accessing your information". I now get the same message if I use the previous version of BB Link. I don't understand what's going wrong. My BB ID is live and kicking and has been for ages. It's the same ID as on my Q10. I haven't mistyped my username or password. I've even reset my password thinking that might have got corrupted somehow.  I've signed out of my BB ID and then back in. I've closed BB Link and opened it again. I've tried every help topic I can think of on the various BB help sites/pages but without any success (that may be because I'm being inept, of course). I've tried uninstalling BB Link on my laptop and then reinstalling it -- disabling my antivirus programme first in case that's interfering with it -- but again without success. If anyone has any bright ideas of how to solve this problem, I'd be very grateful. Thank you.

    It's not so simple to add a new BBID to the Q10.. it requires a security wipe of the device.
    Try this however, in your Settings > BBID. Edit and make some small change of your First or Last name or even the security question used, and save.
    Then let's see if that reconnects your device to the BBID.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT201210 Stuck in recovery mode, unable to restore. "This device isn't eligible for the requested build."

    "The iPad "___" could not be restored. This device isn't eligible for the requested build."
    I tried all the trouble shooting steps listed here, and none worked.
    http://support.apple.com/kb/TS1275
    Any help would be great!
    Edit: iTunes and my Mac OS are all running on the most up-to-date versions.
    Edit 2: FYI I already tried everything mentioned here, as well. Nothing worked.
    http://www.idownloadblog.com/2011/12/28/device-not-eligible-upgrade-restore-requ ested-build/

    Got it.
    For anyone else who may find this thread and has the same problem in the future, here's what I did.
    http://osxdaily.com/2011/11/03/fix-this-device-isnt-eligible-for-the-requested-b uild-error-in-itunes-when-updating-ios/
    In case that link stops working, what I did was I exited iTunes, and then manually edited my hosts. The process is this:
    Go to the hosts file. For Mac OS X this is located at: /etc/hosts or /private/etc/hosts and in Windows it is located at: c:\windows\system32\drivers\etc\hosts
    Open the hosts file with Administrative privileges so that changes can be made and saved (eg: sudo nano /etc/hosts)
    Look for a line that resembles something like this:
    74.208.10.249 gs.apple.com
    Put a # in front of that to comment it out, making it now look like this:
    # 74.208.10.249 gs.apple.com
    Save the hosts file (control + O)
    Flush DNS cache and restart iTunes
    Essentially, anything with a gs.apple.com address, put a # and a space in front of it. Then, AFTER that, I flushed my DNS cache. The article says to do that before, but I found doing it after manually editing the hosts was the only way to get it to work. Here's how:
    Quit out of iTunes and open the Terminal in OS X Lion, then type:
    dscacheutil -flushcache
    Then you should be good to go. Hope this takes you less time to fix than it did for me. Cheers!

  • DVD Burn problem. "Device error - the target device isn't suitable for use"

    Hello everyone,
    I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
    Just thought it was important to report success as well as failure!
    However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
    Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
    I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
    Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
    This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
    So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
    I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
    Justin.

    OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
    system meets minimum requirements
    Project size does not exceed disk capacity
    successfully burned project to DVD folder -thus skip to step 8.
      8.   Using new blank media for burning
      9.   Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
      10.  Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
      11.  Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
      12.  Disabled IMAPI CD burning COM
      13.  DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
      14.  Updated DVD firmware
      15.  Already updated nVidia drivers
      16.  Don't have any other DVD drives to disconnect.
      17.  MPEG workaround. Will resort to if required.
      18.  Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
      19.  Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
      20.  Visit forums to see if other have the same problem. Hi guys
    So still working through some of the items above.
    Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
    What a process.
    Stay tuned.
    Justin.

  • Error Message when i try to restore my iPhone: The iPhone "iPhone" could not be restored. This device isn't eligible for the requested build

    Error Message when i try to restore my iPhone: The iPhone "iPhone" could not be restored. This device isn't eligible for the requested build. HELP PLEASE!!!!

    My Ipad and Iphone 3gs is both have issues too! I'm ready to give up! lol HELP ANYONE......

  • HT201442 Just bought a brand new ipod touch a month ago and went in to iTunes. There was an update for me so I downloaded it to my ipod and then it went into recovery mode. Tried to restore it in itunes but was told this device isn't eligible.  Help!!

    Just bought a new ipod touch a month ago.  Went into itunes to burn music and had an update to download which I did. Then I get a message that my ipod has gone into recovery mode. It's locked up with a black screen with iTunes logo and picture of a plugin on the screen. Tried to restore it as recommended but itunes said this device isn't eligible for the requested build. Error codes 3194 and 17. This is very frustrating considering the cost of the ipod and how new it is. Now what do I do?  Buy another one? Can anybody fix these types of things? Is this a common occurance or am I just unlucky?

    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
         Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Iphone stuck in recovery mode and can't recover because "This device isn't eligible for the requested build"

    I have an iPhone 4S and it has been stuck in recovery mode for whatever reason. I have tried using data recovery software that can turn my phone to normal mode but when it tries all my phone does in turn off and then on again, back into recovery mode. I can't use iTunes to recover my phone because it won't let me do it without updating and recovering the iPhone. When I do this it gives me the error "This device isn't eligible for the requested build"
    Is there any other way I can restore my phone from backup without getting this error?

    https://discussions.apple.com/search.jspa?facet=content&type=discussion&sort=rel evanceDesc&showAnsweredFirst=true&q=This…
    Look for the thread with the green checkmark to find the answer to your question.

  • "this device isn't eligible for the requested build."

    I've just changed carrier and got a new sim card. My iphone 3gs will not work with my new sim because it is locked to my old carrier. I called my old carrier and they removed the lock from the phone and said all i had to do now was restore the phone and i'm good to go. I know the sim is not faulty because it works fine in my old iphone 3 which i am stuck using at the moment.
    When i try to restore my 3gs i get the error message: "...this device isn't eligible for the requested build."
    I've never had a problem before restoring an iphone, what gives? how do i fix this?
    thanks!!

    Can you get a Wi-Fi connection on your iPhone?
    I got an Internet connection on my phone, went to SETTINGS --> GENERAL --> SOFTWARE UPDATE and updated my Software wirelessly (no iTunes involved).
    When I connected my phone to my Computer again and iTunes popped up, it showed that my iPhone software was up to date. Then I could restore to an old back-up.

  • HT201442 iOS: Restore error 3194 or 'This device isn't eligible for the requested build', all program downloaded but till showing same problem, kindly suggest me

    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Problem updating to iOS5. Error message: "This device isn't eligible for the requested build."

    Hi
    I've been trying to uodate my iPhone to iOS5 since last night. Initially, I kept getting the "Internal Error" messages since I'm assuming that the server was busy. A little later, that changed to the "Server is unavailable" messages. Which is when I gave up trying yesterday.
    I've now resumed my efforts since today morning & I've started getting a different message: "The iPhone could not be restored. This device isn't eligible for the requested build." I have no idea why this is happening. I've updated my iTunes & OSX Lion to the newest versions.
    Any help would be appreciated.
    iPhone 4 (OS 4.3.5 8L1)
    OSX Lion (10.7.2)
    iTunes 10.5 (141)
    Thanks.
    d

    OK so problem solved. Turns out that I had used Tiny Umbrella last night to kick the phone out of recovery mode when it got stuck during one of the attempted upgrades. And I forgot to uncheck the "set host to Cydia" option before quitting.
    All done. iOS5 is here!

Maybe you are looking for

  • Why cant i open pdf files with adobe on my phone?

    Why can't I open PDF files on my phone if I have adobe installed?

  • Can't share hotel internet connection

    I can only connect to the hotel internet when I have the Airport Express connection sharing setting in 'Off (Bridge Mode)'. In this mode my iPod Touch can see the network and connect but requires its own daily payment for internet. Needless to say I'

  • Retreiving photos from ipod

    Hi, my old powerbook died a while back and i lost everything, but my music and photos were stored on my ipod, i got my music back but i can't work out how to retrieve my photos... does anyone know a program that can help me? Thanks

  • How to permanently allow apps to connect to intern...

    Hi, With certain (web?)-apps I always have to allow (or not allow) them to connect to the Internet or to read my phone data.That's irritating. Is there a global, or per app, setting to store this approval ??

  • Can i open soundcloud in itunes

    i want to open my sounds cloud music app in itunes