D-Link DFE-530TX not working.
I have got this problem since i bought this Ethernet adapter. I mainly boght it, because I wanted to run OpenBSD. But it just doesn't work. Theres i light when I plug my ethernet cable to it, but that it just about it.
I have tried to disable my onboard ethernet controller (VIA Technologies Inc|VT3119 Gigabit Ethernet Controller), and add "pci=routeirq". But that hasn't worked at all.
From 'lspci -vv
01:07.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86)
Subsystem: D-Link System Inc: Unknown device 1403
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at eb013000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
And from 'dmesg'
Linux version 2.6.12-ARCH (root@earth) (gcc version 3.4.3) #1 SMP Fri Jul 1 11:55:48 PDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32752 pages, LIFO batch:15
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f7a20
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff8300
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Built 1 zonelists
Kernel command line: root=/dev/discs/disc0/part1 devfs=nomount pci=routeirq vga=792 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2166.913 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032576k/1048512k available (4079k kernel code, 15160k reserved, 1270k data, 288k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4292.60 BogoMIPS (lpj=2146304)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: AMD Athlon(tm) XP 3000+ stepping 00
Total of 1 processors activated (4292.60 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 1
groups: 1
domain 1: span 1
groups: 1
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbb70, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:02:00.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.HUB0._PRT]
ACPI: Power Resource [ISAV] (on)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *1, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:01.1[A] -> Link [APCS] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 21
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 20
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 21
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APSI] -> GSI 22 (level, high) -> IRQ 22
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:01:0a.1[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:01:0a.2[C] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4200-0x427f has been reserved
pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
pnp: 00:01: ioport range 0x5000-0x503f has been reserved
pnp: 00:01: ioport range 0x5100-0x513f has been reserved
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
inotify device minor=63
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 [email protected]" target="_new">[email protected]).
JFS: nTxBlock = 8070, nTxLock = 64560
SGI XFS with ACLs, security attributes, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 6144k, total 262144k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:d4d0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (45 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chipsets
intelfb: Version 0.9.2
PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2-U400R: IDE controller at PCI slot 0000:00:09.0
NFORCE2-U400R: chipset revision 163
NFORCE2-U400R: not 100% native mode: will probe irqs later
NFORCE2-U400R: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2-U400R: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2-U400R: 0000:00:09.0 (rev a3) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: SAMSUNG SP1203N, ATA DISK drive
hdb: Maxtor 6Y080P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
hdd: DVD-ROM BDV316E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdb: max request size: 128KiB
hdb: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hdb: cache flushes supported
/dev/ide/host0/bus0/target1/lun0: p1 p2
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
libata version 1.11 loaded.
sata_nv version 0.6
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APSI] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 22
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 22
ata1: no device found (phy stat 00000000)
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 5844.000 MB/sec
raid5: using function: pIII_sse (5844.000 MB/sec)
raid6: int32x1 894 MB/s
raid6: int32x2 1093 MB/s
raid6: int32x4 710 MB/s
raid6: int32x8 687 MB/s
raid6: mmxx1 1808 MB/s
raid6: mmxx2 3082 MB/s
raid6: sse1x1 1730 MB/s
raid6: sse1x2 2816 MB/s
raid6: using algorithm sse1x2 (2816 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
Disabled Privacy Extensions on device c05dbde0(lo)
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S5)
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS2++ Logitech MX Mouse on isa0060/serio1
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 288k freed
cdrom: open failed.
cdrom: open failed.
Adding 128512k swap on /dev/discs/disc0/part2. Priority:-1 extents:1
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
usbcore: registered new driver usbfs
usbcore: registered new driver hub
VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.13
Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
Copyright (c) 2004 Red Hat Inc.
ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:01:0b.0, from 10 to 2
eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
eth0: Ethernet Address: 00:50:8D:62:92:E4
Velocity is AUTO mode
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
Audigy2 value:Special config.
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
kqemu: module license 'unspecified' taints kernel.
QEMU Accelerator Module version 1.1.0, Copyright (c) 2005 Fabrice Bellard
This is a proprietary product. Read the LICENSE file for more information
Redistribution of this module is prohibited without authorization
KQEMU installed, max_instances=4 max_locked_mem=129156kB.
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7667 Fri Jun 17 07:01:04 PDT 2005
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
PCI: Via IRQ fixup for 0000:01:07.0, from 5 to 3
eth1: VIA Rhine III at 0x1a000, 00:11:95:d8:3b:a6, IRQ 19.
eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:01:0a.0, from 10 to 2
uhci_hcd 0000:01:0a.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:01:0a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:01:0a.0: irq 18, io base 0x0000a800
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:01:0a.1[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
PCI: Via IRQ fixup for 0000:01:0a.1, from 5 to 3
uhci_hcd 0000:01:0a.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:01:0a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:01:0a.1: irq 19, io base 0x0000ac00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: nVidia Corporation MCP2A USB Controller
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: irq 21, io mem 0xec004000
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:01:0a.2[C] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
PCI: Via IRQ fixup for 0000:01:0a.2, from 3 to 0
ehci_hcd 0000:01:0a.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:01:0a.2: new USB bus registered, assigned bus number 4
ehci_hcd 0000:01:0a.2: irq 16, io mem 0xeb011000
ehci_hcd 0000:01:0a.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: nVidia Corporation MCP2A USB Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:02.0: irq 21, io mem 0xec002000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: nVidia Corporation MCP2A USB Controller (#2)
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:02.1: irq 20, io mem 0xec003000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
eth0: no IPv6 routers present
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
Velocity is AUTO mode
eth0: Link autonegation speed 100M bps full duplex
eth0: no IPv6 routers present
Could anyone tell me the problem? I am not strong in this kind of hardware.
Thanks, Tim. However, I'm a consultant; it's not always my call. I just wanted to share what I had discovered, so someone else might benefit.
Your tip would be best submitted at Mac OSX Hints as the info would remain publicly available. Where as this thread will be archived in a few months.
I also do some mac consultancy and only recommend using tried and tested products that work out of the box without the need for installing extra drivers. Realtek chipsets have worked for the longest time and are found on the the cheapest of generic NICS.
Similar Messages
-
After installing firefox 27 "save link as" is not working
after installing firefox 27 "save link as" is not working started a few days ago use to work fine before v27 was installed. please help.
Hello hansram, '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you. -
D-Link dub e100 not work in mac 10.10
hi , i just upgraded my macbook pro to mac 10.10 and after upgrade my USB-to-ethernet device (D-link dub e100) not work and in setting says me self assigned ip
please help.Thanks for the suggestion.
I have found that clicking on the photo works on export, but not all of the time.
I tried redefining a keyboard shortcut. That does not work since the "Menu: View/Zoom In" function does not work either.
Strange that it is only a problem with multiple photos open and they appear in tabs. I have tried deselecting "Open new documents as tabs" under preferences. That 'fixes' the problem since the zoom in / out does not work only with multiple tabs open, but it works with multiple windows open. I suspect that this 'fix' will work on the export problem too, since I will be exporting the active window.
So essentially, the 'open new documents as tabs' is so buggy that it should not be used.
Hopefully Adobe will not try to charge me for an upgrade to CS5 in order to fix this problem. -
Document Approval - Link in Email not working
Hi
I am using the approval function for KM documents.
When a content item is changed, and submitted for approval, the approver gets an email.
In that email there is two links, one to the content item itself and one to the details of the content item.
The one to the details of the document does not work!
The host name seems to be missing in the url.
The one to the content item itself works fine.
I do have set up the hostname in:
System Administration->System Configuration->KM->CM->Global Services->Url Generator Service.
that points to the content item.A colleague of mine recommends looking here:
Ya, it is unsder systemadmin > sys config > KM > config > CM > Global Services > URL Generator Service.
There is a value for "host" and there which should be "http://(orhttps://)portalserver:servport
Regards,
Craig -
Ringtone link in media not working
When I go into Media then into ringtones and open up my menu I have an option for Download Ring Tone. When I click on the link I get this error.
HTTP Error 500: Internal Server Error
An unexpected condition was encountered which prevented your request from being fulfilled. This could be cause by a problem with teh gateway, a problem with destination server or a problem with the page itself. Please try loading a different page. Contact your service provider if this problem persists
I then have the option to select ok or go to details. If I go to details it brings me to a page saying
Error Accessing the html page
Error Details
- HTTP Error Code:500
-Error
Message:java.lang.IndexOutOfBoundsException: Index: 0, Size: 0 This error has been logged with the server,please try again later.
I have tested that link with 2 8330 and 1 8130. I have been able to get the page to display twice but with no actual reason for it to work. One time I hit refresh and it loaded correctly and another time I hit back accedentally and it loaded to the ringtone page(on the 8130). I bookmarked the page when it did showed properly when I hit the back button. The bookmark will load perfectly everytime. But going through that above link does not work and I have tried it no less then 30 times.
I sent the bookmark to another BB via pin and it was not able to load the page. When I go to copy the page source both from the error and the bookmark that loads this is the link I get.
http://mobile.blackberry.com/MBC/homepage?book=ringtone_catalog&legal=ringtone_catalog_eula
All 3 phones are on Telus Mobility running 4.3. The curves both have default browser settings on them and can connect to other sites no problem, the pearl had default settings when I got it to work and book marked it and since then I have changed some of the internet settings. I enabled java and switched emulation to blackberry instead of openwave(wap). That did not make any difference to the link in media but bookmark loads fine still. Internet browser is the default for all devices.
Hope this is enough info. I want to know if any other Telus clients have the issue or if any other carriers are having the same problem as well.
Thanks for any help and suggestionsMobilekid, did you figure out your solution?
Nurse-Berry
Follow NurseBerry08 on Twitter -
Href links in slideshow not working
hi,
I have created a non-flash slideshow with WOW Slider which I find to be a very good program and is jquery based.
the actual slideshow runs fine on iPad, my PC - and Android devices,
but:
the six slides have links embedded to other websites, that I have set up to run in a new window, and work fine on PC & Andoid
but on the iPad the outbound links do not work - yet an href link will work on the iPad if called from a static image.
I'm at my wits end with this, and any help would be really appreciated.
thanks,
Kevin UK
nb: the problem page is: http://www.kevbro.co.uk/slides.htm
the wow slider code is:
<!-- Start WOWSlider.com BODY section --> <!-- add to the <body> of your page -->
<div id="wowslider-container1">
<div class="ws_images">
<ul>
<li><a href="http://www.farnworthsom.co.uk/" target="_blank"><img src="data1/images/010.jpg" alt="my latest work" title="my latest work" id="wows1_0"/></a>Driving Instructor training, help with the ADI Standards Check etc</li>
<li><a href="http://www.kevbro.co.uk/chris/index.htm" target="_blank"><img src="data1/images/007.jpg" alt="small business site" title="small business site" id="wows1_1"/></a>Hanging Baskets and Landscaping </li>
<li><a href="http://www.kevbro.co.uk/magellanfoods/index.html" target="_blank"><img src="data1/images/009.jpg" alt="local Food Company" title="local Food Company" id="wows1_2"/></a>a large site with an online ordering system</li>
<li><a href="http://www.carols-pastels.co.uk" target="_blank"><img src="data1/images/001.jpg" alt="Carol's pastels" title="Carol's pastels" id="wows1_3"/></a>the lovely artwork of my talented wife </li>
<li><a href="http://www.carols-pastels.co.uk/books/" target="_blank"><img src="data1/images/002.jpg" alt="Carol's first book" title="Carol's first book" id="wows1_4"/></a>a charming fantasy tale for children. </li>
<li><a href="http://www.kevbro.co.uk/canyon/index.htm" target="_blank"><img src="data1/images/005.jpg" alt="Grand Canyon" title="Grand Canyon" id="wows1_5"/></a>my tribute to 9 brave men in replica boats</li>
</ul>
</div>
<div class="ws_bullets"> <div>
<a href="#" title="my latest work">1</a>
<a href="#" title="small business site">2</a>
<a href="#" title="local Food Company">3</a>
<a href="#" title="Carol's pastels">4</a>
<a href="#" title="Carol's first book">5</a>
<a href="#" title="Grand Canyon">6</a>
</div>
</div>
<span class="wsl"><a href="http://wowslider.com/vu">image carousel</a> by WOWSlider.com v7.3</span>
<div class="ws_shadow"></div>
</div>
<script type="text/javascript" src="engine1/wowslider.js"></script>
<script type="text/javascript" src="engine1/script.js"></script>
<!-- End WOWSlider.com BODY section -->I have tried many of them Frank ...
jquery ones like Wowslider, Virtual lightbox, Juicebox, Nivo slider, and css based one's like CSS slider et al.
and believe me when I say that I have found none of them to be totally reliable across all the varied devices.
whilst what I have resorted to is quite basic, it gets the job done - particularly given my age and what I am hoping to achieve with my site.
as a kind of thank you to Michael and yourself, there are links below to two small pages I did ages ago that may give you a bit of a chuckle.
they are not mentioned on my site, and I'm not sure if they work on iPads.
http://www.kevbro.co.uk/galway/bay.htm
http://www.carols-pastels.co.uk/Nigerianphone/phone.htm
all the best,
Kevin -
Why do the regular links in template not work on announcement pages?
I am trying to figure out why the regular links (buttons) on top in my template does not work on the announcement pages on my business catalyst website. The links work perfectly fine on the other pages, but when you click on one of the latest news links to the right to read it, it leads you to a page with a url-prefix called announcements, and when you try to get back to one of the other pages by clicking on the buttons at the top for example the register button, it takes you to: http://www.littlefolkies.com/announcements/register instead of http://www.littlefolkies.com/register, and so it gives you a error message: page not found...???
Is there anyone who can help me out? I don't understand why this is happening.
You can try it yourself at www.littlefolkies.com...
I greatly appreciate any guidance!
Thanks so much,
ITake a look at your classes link.
You can see how you have the / in front and the others do not. This is why.
This tells BC to read from the site root. Without it when your inside sub folders (other levels in your url) then it will link to only within that level without the / at the front.
It is the same reason why you do all your templates and css etc with the / in front which I mentioned to you before if I recall.
You can also change the name /announcements in the url in the settings for it if you want to. -
Webi report part(include Opendoc Link) ondesktop did not work in BI Widgets
My customer followed <BI Widgets User Guide>(XI3.1) to create a webi report part(include Opendoc Link) onto desktop.
Page 26:
To convert Report Part into a Widget ,drag and drop the Report Part from the Web Intelligence Viewer onto the desktop.
As a widget, the Report Part will include the following BI Widgets features:
- Automatic refresh
- User controlled size and positioning
- Saved display and data context state
- Optional setting as the top application window
- Full XI R3 security
- Web Intelligence opendoc links to detailed reports.
But it can not be clicked(hyperlink did not work).
My customer follow the SAP Note 1244968 to create again, it still can not be clicked.
For I can't reproduce this issue, could you tell me what's it probably related to?
SAP Note 1244968:
Symptom
Trying to use Hyperlinks in a BI Widget created from a WebIntelligence
report
Environment
XIR3
Workflow
1. Login in Webintelligence
2. Create on efashion a Webintelligence report with the
objects:Year,Sales Revenue
3. In the Edit panel add a column to the table and insert the
variable :=If([State]="DC"; HTMLEncode("http://uk.yahoo.com"); "")
4. In the Properties Display/Display/Read cell content as Hyperlink
5. Run the report and save it
6. Open the Webintelligence report with HTML view and click on the
hyperlink you are redirected to the Yahoo website
7. Log in BI Widget
8. Right click on the right inside icon of BI Widget and click on
Document List Explorer
9. Find the Webintelligence report and double click on it
10. Click on the table and drag and drop it to your desktop
11. The BI Widget gets created
12. Click on the column containing the Hyperlink:nothing happens.
Cause
There is no functionality of using Hyperlinks in a BI Widget created
from a Webintelligence report
Resolution
Enhancement Request ADAPT01119581 has been created
Environment details:
Srerver Environment: OS Version: RedHatEnterpriseLinuxES4.0 update5
Client Environment: OS Version: WindowsXP
Browser: IE6
JRE Version: 1.6.003_
Web & Application Server: Tomcat 5.5.20
Database character: AL32UTF8, JA16SJIS
Connection: native, ODBC, OLEDB
NLS LANG: Japanese Japan.JA16SJISHi Soniya,
These are the steps:
1. Log in into infoview
2. Change the preferences (Click in the Preference button in the main tool bar), in the WebIntelligence section change the Select a default view format: to Interactive.
3. Click OK
4. Open the report where you want to add the hyperlink
5. Right click in the column or cell to add the hyperlink
6. Click Hypelink > New
7. You will see the Create Hypelink window, click Browse the select which report do you want to link
8. Fill in the parameter, prompts, etc.
and that's it, hope it's clear now. If you have any question let me know. -
Link functions are not working correctly
I am have a number of links on my page and I am using the a;link, a:hover and a:visited commands but I am getting strange results. First of all my css is on a separate style sheet. What I am trying to do is have all my links in gray text both when before and after being visited and I want the text to change to red and underline when I hover over the link. My results are that in live view the links all seem to work ok except for my HOME link at the bottom of the page where it does not change color and does not underline. When I view in browser the results are worse. None of the links change when I hover over them excepts for the DOWNLOAD link. Also note that I have 4 columns of unordered lists about the footer which also does not work either. Here is the source and css code. Thanks for your help.
Dan
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="description" content="HOME PAGE for company which provides chemical process equipment, diaphragm pumps, plastic tanks, pH/ORP controls, mixers, filtration equipment, flowmeters"
<title>Chemtech Process Equipment</title>
<style type="text/css">
</style>
<link href="CSS/Chemtech.css" rel="stylesheet" type="text/css" />
<link rel="stylesheet" href="CSS/verticalmenu.css" type="text/css" />
<link rel="stylesheet" href="CSS/horizontalmenu.css" type="text/css" />
</head>
<body>
<div id="container">
<div id="header"><img src="Images/header.jpg" alt="header" width="960" height="310" border="0" usemap="#logomap" />
<map name="logomap" id="logomap">
<area shape="rect" coords="3,5,265,123" href="index.html" alt="Chemtech Process Equipment" />
</map>
</div>
<div id="navigation_bar"><div class="AJXMenuULDYZCC"><!-- AJXFILE:CSS/horizontalmenu.css -->
<div class="ajxmw1">
<div class="ajxmw2">
<ul>
<li><a href="index.html" title="Home"><b> HOME </b></a></li>
<li><a class="ajxsub" href="productsbytype.html" title="Products"><b> PRODUCTS </b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="productsbytype.html" title="Indexed by Type"><b>Indexed by Type</b></a></li>
<li><a href="productsbymfgr.html" title="Indexed by Manufacturer"><b>Indexed by Manufacturer</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Request Quote"><b>REQUEST QUOTE</b></a></li>
<li><a href="#"><b>DOWNLOADS</b></a></li>
<li><a href="contact%20us.html" title="Contact Us"><b> CONTACT US </b></a></li>
</ul>
</div>
</div>
<br />
</div></div>
<div id="sidebar"><div class="AJXMenuEHWBGHC"><!-- AJXFILE:CSS/verticalmenu.css -->
<ul>
<li><h1><b>PROCESS EQUIPMENT</b></h1></li>
<li><a class="ajxsub" href="#" title="Pumps"><b>Pumps</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Air Diaphragm"><b>Air Diaphragm</b></a></li>
<li><a href="#" title="Centrifugal"><b>Centrifugal</b></a></li>
<li><a href="#" title="Drum"><b>Drum</b></a></li>
<li><a href="#" title="Gear"><b>Gear</b></a></li>
<li><a href="#" title="Hose"><b>Hose</b></a></li>
<li><a href="#" title="Magnetic Drive"><b>Magnetic Drive</b></a></li>
<li><a href="#" title="Metering"><b>Metering</b></a></li>
<li><a href="#" title="Peristaltic"><b>Peristaltic</b></a></li>
<li><a href="#" title="Piston"><b>Piston</b></a></li>
<li><a href="#" title="Vertical"><b>Vertical</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Mixers"><b>Mixers</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Direct Drive"><b>Direct Drive</b></a></li>
<li><a href="#" title="Gear Drive"><b>Gear Drive</b></a></li>
<li><a href="#" title="C-Clamp Mount"><b>C-Clamp Mount</b></a></li>
<li><a href="#" title="Drum Mount"><b>Drum Mount</b></a></li>
<li><a href="#" title="Fixed Top Mount"><b>Fixed Top Mount</b></a></li>
<li><a href="#" title="Side Mount"><b>Side Mount</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Filters"><b>Filters</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Bag"><b>Bag</b></a></li>
<li><a href="#" title="Cartridge"><b>Cartridge</b></a></li>
<li><a href="#" title="Centrifuge"><b>Centrifuge</b></a></li>
<li><a class="ajxsub" href="#" title="Indexing Media"><b>Indexing Media</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Gravity FIlter"><b>Gravity Filter</b></a></li>
<li><a href="#" title="Vacuum FIlter"><b>Vacuum FIlter</b></a></li>
<li><a href="#" title="Sludge Filter"><b>Sludge FIlter</b></a></li>
<li><a href="#" title="Pressure Filter"><b>Pressure Filter</b></a></li>
<li><a href="#" title="Sludge Filter"><b>Sludge Filter</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Oil Skimmers"><b>Oil Skimmers</b></a></li>
<li><a href="#" title="Oil-Water Separators"><b>Oil-Water Separators</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Tanks"><b>Tanks</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Carboys & Totes"><b>Carboys & Totes</b></a></li>
<li><a href="#" title="Rectangular"><b>Rectangular </b></a></li>
<li><a href="#" title="Cylindrical Cone Bottom"><b>Cylindrical Cone Bottom</b></a></li>
<li><a href="#" title="Cylindrical Flat Bottom"><b>Cylindrical Flat Bottom</b></a></li>
<li><a href="#" title="Vertical Bulk Storage"><b>Vertical Bulk Storage</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Piping/Hose"><b>Piping / Hose</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="PVC Pipe & Fittings"><b>PVC Pipe & Fittings</b></a></li>
<li><a href="#" title="CPVC Pipe & Fittings"><b>CPVC Pipe & Fittings</b></a></li>
<li><a href="#" title="Polypro Pipe & Fittings"><b>Polypro Pipe & Fittings</b></a></li>
<li><a href="#" title="PE Pipe & Fittings"><b>PE Pipe & Fittings</b></a></li>
<li><a href="#" title="Kynar Pipe & Fittings"><b>Kynar Pipe & Fittings</b></a></li>
<li><a href="#" title="Sanitary Hose, Gaskets & Fittings"><b>Sanitary Hose, Gaskets & Fittings</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Immersion Heaters"><b>Immersion Heaters</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Electric Immersion"><b>Electric Immersion</b></a></li>
<li><a href="#" title="Steam Coil"><b>Steam Coil</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Process Controls"><b>Process Controls</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="pH & ORP Probes"><b>pH & ORP Probes</b></a></li>
<li><a href="#" title="Conductivity Probes"><b>Conductivity Probes</b></a></li>
<li><a href="#" title="Flowmeters"><b>Flowmeters</b></a></li>
<li><a href="#" title="Level Sensors"><b>Level Sensors</b></a></li>
<li><a href="#" title="Pressure Transducers"><b>Pressure Transducers</b></a></li>
<li><a href="#" title="Process Controllers"><b>Process Controllers</b></a></li>
<li><a href="#" title="VFD's"><b>VFD's</b></a></li>
<li><a href="#" title="Power Monitors"><b>Power Monitors</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><h1><b>ENGINEERED SYSTEMS</b></h1></li>
<li><a href="#" title="Chemical Feed Skids"><b>Chemical Feed Skids</b></a></li>
<li><a class="ajxsub" href="#" title="Evaporators"><b>Evaporators</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Burt Process Equipment"><b>Burt Process Equipment</b></a></li>
<li><a href="#" title="Filtertech"><b>Filtertech</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Filtration Systems"><b>Filtration Systems</b></a></li>
<li><a href="#" title="Fume Scrubbers"><b>Fume Scrubbers</b></a></li>
<li><a href="#" title="pH Neutralization"><b>pH Neutralization</b></a></li>
<li><a href="#" title="RODI Water Systems"><b>RODI Water Systerms</b></a></li>
<li><a href="#" title="Transfer Sumps"><b>Transfer Sumps</b></a></li>
<li><a href="#" title="UL Control Panels"><b>UL Control Panels</b></a></li>
<li><a href="#" title="Vacuum Distillation"><b>Vacuum Distillation</b></a></li>
<li><a class="ajxsub" href="#" title="Wastewater Treatment"><b>Wastewater Treatment</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Burt Process Equipment"><b>Burt Process Equipment</b></a></li>
<li><a href="#" title="Filtertech"><b>Filtertech</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Water Reclaim (LEEDS)"><b>Water Reclaim (LEEDS)</b></a></li>
</ul>
<br />
</div>
</div>
<h1>Engineered Solutions to your fluid handing requirements.<img src="Images/aro-pump-ad.jpg" alt="aro pump ad" width="200" height="200" hspace="10" vspace="15" align="right" /></h1>
<p>Chemtech Process Equipment (CPE) provides fluid handling equipment to a wide range of industries which include pharmaceutical, biotechnology, microelectronics, metal finishing, chemical processing and general manufacturing.</p>
<p>CPE offers turnkey engineered products such as transfer sumps, wastewater treatment, coolant filration, oil-water separation, water reclamation (LEEDS), pH neutralization, deionized water (RODI), and custom fabricated tanks and vessels.</p>
<p>CPE’s product line includes pumps, tanks, mixers, filters, evaporators, magnetic separators, centrifuges, oil skimmers, flowmeters, level, pH, ORP, and conductivity measurement, heaters, plastic pipe, valves and fittings, sanitary hose, and gaskets to name a few. Feel free to review our product line and contact us if you have any questions or applications to discuss.</p>
<h2>Products<br /></h2>
<hr align="left" width="740" />
<br />
<div class="floatlist">
<ul>
<li><a href="">Air Diaphragm Pumps</a></li>
<li><a href="">Cenrifugal Pumps</a></li>
<li><a href="">Drum Pumps</a></li>
<li><a href="">Gear Pumps</a></li>
<li><a href="">Hose Pumps</a></li>
<li><a href="">Magnetic Drive Pumps</a></li>
<li><a href="">Metering Pumps</a></li>
<li><a href="">Multi-Stage Centrifugal Pumps</a></li>
<li><a href="">Peristaltic Pumps</a></li>
<li><a href="">Piston Pumps</a></li>
<li><a href="">Submersible Pumps</a></li>
<li><a href="">Vertical Immersion Pumps</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Custom Engineered Tanks</a></li>
<li><a href="">Molded Plastic Tanks</a></li>
<li><a href="">Direct Drive Mixers</a></li>
<li><a href="">Gear Drive Mixers</a></li>
<li><a href="">Portable Mixers</a></li>
<li><a href="">Side Mount Mixers</a></li>
<li><a href="">Conductivity Probes</a></li>
<li><a href="">Flowmeters</a></li>
<li><a href="">Level Sensors</a></li>
<li><a href="">pH & ORP Probes</a></li>
<li><a href="">Power Monitors</a></li>
<li><a href="">Pressure Transducers</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Process Controllers</a></li>
<li><a href="">Ultrasonic Level Transmitters</a></li>
<li><a href="">Variable Frequency Drives</a></li>
<li><a href="">Sanitary Hose, Gaskets & Fittings</a></li>
<li><a href="">PVC Pipe, Valves & Fittings</a></li>
<li><a href="">CPVC Pipe, Valves & Fittings</a></li>
<li><a href="">Polypro Pipe, Valves & Fittings</a></li>
<li><a href="">Polyethylene High Purity Piping</a></li>
<li><a href="">Immersion Heaters</a></li>
<li><a href="">Magnetic Separators</a></li>
<li><a href="">Centrifuges</a></li>
<li><a href="">Evaporators</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Bag Filters</a></li>
<li><a href="">Cartridge Filters</a></li>
<li><a href="">Indexing Media Filters</a></li>
<li><a href="">Gravity Filters</a></li>
<li><a href="">Pressure Filters</a></li>
<li><a href="">Sludge Filters</a></li>
<li><a href="">Vacuum Filters</a></li>
<li><a href="">Filter Bags</a></li>
<li><a href="">Filters Cartridges</a></li>
<li><a href="">Filter Media</a></li>
<li><a href="">Pulsation Dampeners</a></li>
<li><a href="">Fiberglass Grating</a></li>
</ul>
</div>
<div id="footer">
<ul>
<li><a href="index.html">HOME</a></li>
<li><a href="productsbytype.html">PRODUCTS</a></li>
<li><a href="requestquote.html">REQUEST QUOTE</a></li>
<li><a href="downloads.html">DOWNLOADS</a></li>
<li><a href="contact us.html">CONTACT US</a></li>
</ul>
<hr align="center" width="940" id="footer rule2" />
<h4>© 2011 Chemtech Process Equipment, All Rights Reserved, Designed and Developed By Graphics Advantage. <img src="Images/GA-logo.jpg" width="46" height="40" align="top" /><br /><br /></h4>
</div>
</div>
</body>
</html>
@charset "utf-8";
body {
background-image: url(../Images/logo-background.jpg);
background-repeat: repeat;
background-attachment: fixed;
#container {
font-family: Arial, Helvetica, sans-serif;
font-size: 14px;
color: #000;
background-color: #FFF;
width: 960px;
margin-right: auto;
margin-left: auto;
overflow: hidden;
background-attachment: fixed;
#container p {
padding-right: 20px;
#header {
width: 960px;
height: 310px;
#headernarrow {
height: 150px;
width: 960px;
#navigation_bar {
height: 31px;
width: 960px;
#sidebar {
float: left;
width: auto;
margin-right: 20px;
#footer {
text-align: center;
width: 960px;
float: left;
#footer ul li {
display: inline;
#footer ul li a {
padding-right: 10px;
padding-left: 10px;
a:link {
color:#666;
text-decoration:none;
a:hover {
color:#F00;
text-decoration:underline;
a:visited {
color:#666;
text-decoration:none;
.floatlist {
font-family: Arial, Helvetica, sans-serif;
font-size: 10px;
color: #F00;
float: left;
height: auto;
width: 190px;
.floatproductlist {
font-family: Arial, Helvetica, sans-serif;
float: left;
height: auto;
font-size: 14px;
font-style: normal;
color: #000;
width: 380px;
h4 {
font-size: 10px;
font-family: Arial, Helvetica, sans-serif;
h1 {
font-family: Arial, Helvetica, sans-serif;
font-size: 24px;
font-weight: bold;
color: #F00;
ul {
list-style-type: none;
padding: 0px;
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 1em;
display: block;
.largeheading {
font-family: Arial, Helvetica, sans-serif;
font-size: 48px;
color: #F00;
.floatimageleft {
float: left;
width: 250px;
margin-right: 20px;
height: auto;
margin-top: 10px;
background-image: url(../Images/aro-compact-series-float.jpg);
background-repeat: no-repeat;
margin-bottom: 20px;When you use the link pseudclass in your css it has to be expressed in the correct order.
LoVe HAte
Link
Visited
Hover
Active
It doesn't matter that you have not expressed all four but the three that you have still need to be that way.
Anyway, try it, we have nothing to lose!
Martin -
TCS2 - Cross References between linked Frame files not working
Hi,
All the cross-references in my linked in FrameMaker 9 files work when output in PDF, however, when outputting WebHelp from RoboHelp 8, FrameMaker cross references that reference another FrameMaker file (i.e. not Current) do not work. The format is correct, they appear blue and underlined like every other link/cross-reference, but when moused over in the browser, there's no link to click. The HTML created by RoboHelp does not point to a file. For example, here's the HTML for one link not working as shown from within RoboHelp:
<p class="FM_Bulleted"><span style="font-family: 'Times New Roman'; font-size: 7.0pt;">   </span>•<span
style="font-family: 'Times New Roman'; font-size: 7.0pt;">   </span><a><span
class="FM_Link">Create Supported App from
Install</span></a><span class="FM_Bold">.</span>
RoboHelp appears to partially convert the link as <span class="FM_Link"> appears in the HTML but I think there should be more information in the <a> definition, such as in the HTML created for a link that references a topic created from the same FrameMaker file.
<p class="FM_Bulleted"><span style="font-family: 'Times New Roman'; font-size: 7.0pt;">   </span>•<span
style="font-family: 'Times New Roman'; font-size: 7.0pt;">   </span><a
href="#XREF_17096_Creating_an">Creating an App</a></p>
I've ensured all the cross-references in each framemaker file in the book have the same format and are mapped to <$paratext> in the project settings. I've also tried importing the FrameMaker book instead of linking it and the same problem persists.
Any ideas on how to make RoboHelp create the link correctly? Any help you can offer would be greatly appreciated.
Thank you,
Jacquie FinneyMost of the major cross reference issues have been resolved in TCS 2 with further improvements in TCS 3.
Please ensure that you have all the patches of TCS 2 installed on your system.
If the issue is still there, there could be an altogether different reason for cross reference not working or the issue might have been fixed in TCS 3.
The reason or workaround can be analysed once the sample files with the issues are provided.
It will be great if you could share a small sample FM document containing the cross reference and target having the issue. If the cross reference is across documents, then a FrameMaker book along with its FM files can be shared in a zip format.
You can mail the documents to me at magrawalATadobeDOTcom
Mayank -
There is a toolbar feature in the lower right corner of the taskbar. I tried to set up the Links toolbar. I can drag addresses to this, but when I click them, nothing happens. What should happen is the site/page whose address I clicked should open.
How can I fix this? Is it a problem with the Firefox I'm currently using?I checked out the links you provided. One is dead, one is for Windows 7, which doesn't apply to my problem because I'm using Windows 8, and I've been checking out the third.
I'm a novice and may not have the right vocabulary to explain myself. The Links toolbar is accessed from the bottom right side of the taskbar at the bottom of the screen. Apparently Firefox is necessary to use this, as everyone I've talked to swears it's not visible for IE.
What I'm referring to is Right-click "show hidden icons." Scroll up to Toolbars. Scroll over to Links. Check it to enable it. Then what should happen is I should be able to drag the address/url from the top of the page to this menu and click on it when I want to go back to that particular page. That is what is not working. Nothing happens when I click the addresses in the Links menu. -
AcrobatActiveXVB SDK Sample - Links in PDF Not working
Hi,
I am trying to create an application in VS.net (similar to AcrobatActiveXVB SDK Sample) to display PDF files in my application. PDF file opens fine. But external links in PDF file are not working. I trying to display a main index pdf file, which contains external links to 10 other PDF files. All 10 PDF files are located in my local hard drive (main index pdf file is also located in the same folder). If I open the main index file in Acrobat Reader then it the links are working fine. It is not working only when it is opened inside the AcrobatActiveXVB SDK Sample. Please help.
Please Note: Links are not grayed. I get the hand mouse pointer, when I mouse over to the links.
Windows OS - XP SP3
Acrobat Reader - Tried it with 9.1.3 & 9.3.3. Un-installed and re-installed multiple times
Thanks in advance.
Rajaramhello, the pdf viewer is still somewhat experimental and under very active development - you could try if the same error is occurring in the current development version, which you can download as an addon from http://mozilla.github.io/pdf.js/extensions/firefox/pdf.js.xpi
in case it has the the same rendering problems, you could then file a bug report at https://github.com/mozilla/pdf.js/issues (a github account is necessary for it though) - please also provide a sample document where the error is apparent! -
Link to URL not working in RH X5
Good morning,
A client asked me to include a hyperlink to an internal site of theirs. After I gave them the WebHelp, they said the link doesn't work (I can't test it here as I work offsite without access to their intranet). They said there is a space missing which would account for it not working. The problem is I copied and pasted the URL into the project from the client's email. Here is the URL copied from the client's email to me - you can see the 2 spaces between ACH and Forms. :
http://sharepoint.myfirstnet.com/TreasuryManagement/ACH%20%20Forms/Product%20Information/T raining/ACH_SEC%20Explained.doc
When I right-click on the link in my topic and check the link properties and when I look at the code on the True Code tab, I can see the 2 spaces (not the code for the spaces, of course, but you can tell there is an extra space) so assumed all was well. Yet on the client's end there is only a single space. And if I copy the link from the True Code tab in RH and past it here, for example, or into an email, it comes out like this:
http://sharepoint.myfirstnet.com/TreasuryManagement/ACH Forms/Product Information/Training/ACH_SEC Explained.doc
The double space has been replaced with a single space. I can't explain how or why that would be changed after I put in the hyperlink. Is there something about HTML or RH in particular that doesn't allow double spaces so removes one?
Thanks for any help.
DianeHave you tried %20%20 in the code rather than spaces?
Just a guess.
See if that works in RoboHelp's viewer.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Link Styles are not working properly
I have set the links styles in my top nav bar to be
Normal: BLUE
Hover: WHITE and BOLD
Visited: BLUE
Actve: WHITE and BOLD
The bold is working, but the color is not changing
Simular problen on the Vertical Nav Ban
Here the Hover and Bold do work, but not the active does not work
Normal: TAN
Hover: WHITE and BOLD
Visited: TAN
Actve: WHITE and BOLD
Here's a link to the page
http://www.imagine-y.com/Clients/TrevorSite/Trevor4When you use the link pseudclass in your css it has to be expressed in the correct order.
LoVe HAte
Link
Visited
Hover
Active
It doesn't matter that you have not expressed all four but the three that you have still need to be that way.
Anyway, try it, we have nothing to lose!
Martin -
ADF Faces link to download not works!
this link: http://download.oracle.com/otn/java/jdeveloper/1013/adf-faces-ea11.zip not works. Please help me.
KassiusI tried it now, and was able to download the zip file. Check it out again.
Maybe you are looking for
-
Satellite A300-1JH PSAGLE: Control buttons don't work with XP
Hello there. I own a Toshiba Satellite A300 psagle. It works beautifully, but there is a problem: the tactile music buttons don't work. I am using Windows XP and I have installed all the drivers available. Could some one please tell me what I should
-
AVC Intra Codec QT not playing
Hi, I just received footage in QT from a third party that I can't seem to play, neither on FCP or QT. The footage is in AVC Intra 100M Codec, I've downloaded the Panasonic P2 AVC Intra Codec, but still....no luck. Any ideas? Should I use compressor?
-
How do i get rid of osd lockout?
HOW DO I GET RID OF OSD LOCKOUT ON MY MONITOR?
-
Help for fixed columns in web layout
Hi all, I'm facing the problem of Fixing the column of web layout,I know there's a post of solving this, Fixed Rows/Columns in Web Interfaces but all the download links in this post are expired,could any one send me the file or the how to docu
-
Hi. I have noticed several questions in the other forums regarding accessories and products to buy for their ipod, ect. these really are not technical questions and do not really belong in the (for example) ipod forum, but have no other place to go.