D-Link DI-604 and torrents

I`ve encountered pretty wierd problem with D-Link DI-604 router.
I have two PCs in my network, 1 slackware and 1 arch. Running azureus on slackware one gave me no problems. But when I transfered my ~/.Azureus folder to arch computer (and of course changed router`s settings to forward azureus port to arch pc) it all started. When I run Azureus I usually get many connections. Router seems to simply block them.
Even if I have enabled port forwarding via Advanced > Virtual Server ( 192.168.0.110 Both 6827 / 6827 always) Status > Log still gives me
Unrecognized attempt blocked from xxx.xxx.xxx.xxx:6881 to yyy.yyy.yyy.yyy UDP:6827 and so on.
After running azureus for few minutes router slows down. I get massive lag when trying to do anything with it.

Sorry for this thread, when I have posted it, opera started doing wierd stuff, so I thought I haven`t actually posted (even after refreshing page I couldn`t see my thread). So I had to post again.
Mods, please remove this thread.
And sorry again.

Similar Messages

Router Security Settings D-Link DI-604

I just got a D-Link DI-604 WIRED (not wireless) Router.
I changed the password from the default. I disabled "UPNP" because I heard that was a good idea. I also disabled "Gaming Mode" because I don't do games. I have a G4 and a G3 hooked up to it, as well as my cable modem and a printer. Everything works.
What I am trying to find out is what other settings I should consider changing from the default settings.
There are a lot of choices, much too numerous to enumerate. I have sole control over both computers. Nobody has my permission to access my computer from the "outside". Of course, I surf the net and do normal things on it. All I want to do is make sure the "bad guys" don't get into my computer and do nasty things.
Do any of you have some general advice or websites to recommend?
G4 QuickSilver Dual 800MHz; 512 MB SDRAM Mac OS X (10.3.9) Pioneer DVR-111D; also two G3's

The best thing to do is to block every port that you don't need. Both in and out. The you'll know which application needs which port. Try netbarrier.

D-Link DI-604 or Netgear RP614V2 ???

hi.
im going to buy a router and want end user comments on these 2.
D-Link DI-604
Netgear RP614V2
they are both priced similar and is the only 2 i am interested in or else i would have to buy online and dont want that.
also want to know if any of them have problems with the k7n2 onboard lan.
Cheers
Raven

Hi Raven,
I own the DI-604 from D-Link and I recommend it . It's rock stable, lifetime warranty and VERY easy to use. And don't know for the Netgear but, for me, the D-Link do is job.
+1 for D-Link
My opinion.

Link between Delivery and Sales Order Schedule Line

Hi Gurus,
I have a requirement in which i need to display quantity and amount at schedule line level and also the delivery and delivery item for each schedule line.
For example, if there is a sales order O1 and item 10 for which we have 3 schedule lines and 3 deliveries as well say D1, D2 and D3.
Report should be something like this
Sales Order    Item   Schedule Line    Delivery    Del Item   Confirmed Order Qty
O1                 10      1                       D1           10            5
O1                 10       2                      D2            10            5
O1                 10       3                      D3            10            4
How can i determine that a particular delivery corresponds to which schedule line of that saler order-item?
We have the link between delivery and sales order but is there any way that we can get the link of delivery at schedule line level?
Please help.
Regards,
Gaurav

Hi,
I suppose you must check with SD functional consultant and the post should also be in the logistics SD forum and not BI. But I suppose there is know specific link between the schedule line of SO to the Delivery. It is more like a bucket flow for ex.
Sale order   Item    Schedule line qty
SO1            Item1     Sch1            10
SO2            Item1      Sch2           10
Delivery Item QTy
DO1       IT1   15
DO2       IT1    5
In this case qty 15 is distributed over both SO1 and SO2, and SO2 ITem1 Sch2 has link to both the DOs
So I am not sure if you can establish a one to one link, please check with your SD consultants.
Regards,
Ashwin G

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

This can also be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore

Link between sd and pp

hi all,
i have a problem regarding relation or link between sales and production order. i have to fetch production order number related to sales order number. i have checked in the table AFPO that is production order item table , there is field AFPO-KDAUF and AFPO-KDPOS ie, sales order and sales item. but when i see these two fields there is no data into the field so how can i get data into the table related to production order.can anyone help me on this issue.

Please refer to the below links -
https://forums.sdn.sap.com/post!reply.jspa?threadID=309885
Integration points with MM/IM and PP are some of the following -
When a Production order is created and released a reservation gets created for the materials in BOM
When the reservation is created and materials are posted against the reservation with mvt type 311 these are transferred to the respective location.
When a GR is posted with mvt type 101, the Finished or Semifinished goods are posted to the respective storage location and inventorized.
When a consumption is posted with mvt type 261 then stock will get reduced in resepective storage location.
When a batch determination is done in a production order basing on the batch search strategy and sort rule material, quantity and batch are selected.
If WM is configured an associated internal movement for all the above movement types will be posted.
During MRP, BOM which is a master data for PP is used to calculate the dependent requirements of materials.
During availabilty check of a production order basing on the availability check configured materials will be selected and checked.
Hope the above may help you.

'Is there a link between OLM and iProcurement'

I have been asked 'Is there a link between OLM and iProcurement'? The person posing the question is wanting to create trainers as suppliers and I know that the supplier information is shared between OLM and the A/P, A/R and G/L modules and I presume that the link to iProcurement will be via one of these modules however is there a more direct vanilla link between OLM and iprocurement?
Any help would be great
Thanks
DM

I am afraid there is no link between the iProc and OLM.
The closest that apps can offer you is that your learner/delegates can be of type external i.e. being an Organization or a Customer. Hence there exists a link for your delegate to be a customer(hz_parties).
However this might be a future integration i.e. Trainers being suppliers. I am saying so because in 11.5.10 there is a table named OTA_VENDOR_SUPPLIES that has reference to vendor_id. Currently this table is not being used by OLM.
You may look into the code of packages OTA_VSP_API, OTA_TEA_BUS & OTA_PLE_BUS and see if Oracle's future functionality will converge towards your business requirement.
Thanks,
Anil Passi
http://oracle.anilpassi.com

Link between Project and Sales Order

Apart from sales order can we have a link between project and customer master ??
I know that WBS element assignment can be made in sales order but i want to have link between
customer master and project. I don't want any user field or text field in sales order.
Any idea ?
Regards
Ashish

Yes Mr Ashish!
As far as iam concern there is no link between Project & Customer Master, you have to link it with SALES order, I had check in XD03,XD01, the complete customer master, i didnt find any field in customer master which links with Project.
I'll let you know if i find any links.
Regards,
ANSAR

Link between Item and delivery

Hi ,
I want to know the link between item and deliveyr. Like for example, an sales order item ( no. 10) containing 10 quantities can be delviered 5 times( each containing 2 quantities) and line item ( no. 20) can contain one single delivery. I am working on a report where i have to link all the line item to its delivery number. I am trying to achieve this through GENIl but i am not able to indetify as to how to differentiate the different deliveyr numbers. In other words, can some one help me as to how to link the delivery number to its corresponding items?

Document flow is stored in the table VBFA in ECC.
VBELV fied is the sales order number and in POSNV specify the line item number and speicfy VBTYP_N = J (Delivery).
Regards,
Bhanu

Link between GTM and FSCM (sales or purchase order hedging)

Hi all,
I am trying for a few days to have SAP GTM working (I am in an IDES ECC6 system, and as far as I know in EhP4 version). The main goal in fact is to test the currency hedging, and therefore to the link GTM and FSCM, either single-sided purchase or sales order, or two-sided . The flow I want is the following :
-     I buy or sell a product, in GTM, through a trading contract which generates a purchase or sales order.
-     Automatically a currency hedge is generated to cover the risk, in FSCM, I guess in exposure management.
-     And then the financial products (derivatives) are generated as well.
No problem to create the trading contract, no problem to generate the sales or purchase order. But in spite of the (very little) customizing I found in u201CSAP GTM => currency hedgesu201D, and some in FSCM, in u201Ctreasury and risk managementu201D, no way to have this link between GTM and FSCM, no additional document is generated like a Forward Exchange Transaction (I guess I should have this, and then a risk exposure in FSCM).
Would you have an idea ? Is this customizing, or an additional Business Functions or Extension Set not activated ? SAP says : u201Cit worksu201D, but canu2019t find the way.
Thank you very much for your help, I am quite looking for this link for a few days now u2026
Best regards
Patrick

Yes Mr Ashish!
As far as iam concern there is no link between Project & Customer Master, you have to link it with SALES order, I had check in XD03,XD01, the complete customer master, i didnt find any field in customer master which links with Project.
I'll let you know if i find any links.
Regards,
ANSAR

What is the link between PO and Requisition in database side

hello friends,
please can any one tell me that what is the link between PO and Requisition in database side. means after creating the requisition we will go for create the PO based on that requisition.
want to know that what is the link between both in database side.
Thanks in advance
krish.

Hi,
The link is at distribution level, between:
PO_DISTRIBUTIONS_ALL.REQ_DISTRIBUTION_ID
and
PO_REQ_DISTRIBUTIONS_ALL.DISTRIBUTION_ID
Hope it helps.

How can I use apple mail (linked to gmail) and get it to only do autofill on the contacts that I have in apple address book?

How can I use apple mail (linked to gmail) and get it to only do autofill on the contacts that I have in apple address book? Everytime I write an email on the Apple mail app (as well as in Gmail) it recommends a bunch of emails that are not my contacts. I want it to just autofill for the contacts that I have in my address book. Is this possible? Thank you. I have an Imac Intel version and an Iphone 5 phone.

Mail > Window > Previous Recipients

Hi everyone, I have a computer linked to my iPAD through itunes. Then my Computer crashed and had to get a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP :(

Hi everyone, I have a computer linked to my iPAD through itunes. Then my Computer crashed and had to get a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP

what do you mean the old computers link?
my ipad is sycned with my computer but nowhere is there a link
and if I connected it with a new computer and set it to sync it would replace all my data with the data from the new computer

How can I print a Safari page without the links being printed and cover other text?

How can I print a Safari page without the links being printed and covering other text?

Try printing the page as PDF.
From your Safari menu bar click File > Print > Save As PDF then print the PDF file.
If you don't want to do it that way, reset the print system.
Mac OS X: How to reset the printing system

How to get anonymous guest link "View Only" and "Edit" URL using JSOM or Search API ?

Hi,
I need to get list item anonymous guest link View Only and
Edit URLs (as shown in image below) using JSOM or SharePoint 2013
Search API.
the URL will be like this - https://<site URL>/_layouts/15/guestaccess.aspx?guestaccesstoken=yRaYGmE9n
Any one has any idea how to do achieve this?
Thanks
Shakir

Hi Shakir,
To get the anonymous guest link “View Only”, we can use SP.ObjectSharingInformation.anonymousViewLink property in sp.js.
https://msdn.microsoft.com/en-us/library/office/jj246826.aspx
To get the anonymous guest link “Edit”, we can use SP.ObjectSharingInformation.anonymousEditLink property in sp.js.
https://msdn.microsoft.com/en-us/library/office/jj246468.aspx
We can also use REST API to get the guests links:
_api/web/Lists/getbytitle('library name')/items(item id)/GetObjectSharingInformation?$expand=SharedWithUsersCollection&retrieveAnonymousLinks=true
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

D-Link DI-604 and torrents

Similar Messages

Maybe you are looking for