D-Link Wireless Print Server

I have tried to set my MacBook Pro utilizing my D-Link DPR-1260 print server. I get the following warning when I try to use the setup wizard:
Unsupported Operating System
The Printer Setup Wizard supports only Windows XP/2000/98/ME operating systems. Your computer uses the MacIntel operating system.
Troubleshooting Tips
Refer to the documentation that came with your print server for printer setup instructions specific to your operating system.
I have read and reread the printer manual and nowhere does it say anything about Mac setups. I have sent two e-mails to D-link and both have been ignored. The computer recognizes my HP and will print if attached to it. When I attach the printer to the server it will work wireless when I use a Windows based laptop and I really don't want to load Windows if I can get away with it. I have a D-Link wireless router and it works perfectly with the Mac.
Ideas in lay language???

Yes. Think this should be posted on the printing board. That said, I have a similar set up, D-Link wireless router and wireless print server.
I found that I could not rely on Bonjour getting the printers to work. I suggest you take the following steps:
1. Open the printer browser and click on add a new printer.
2. Select the IP printer
3. As the protocol select Line Printer Daemon
4. Input the IP address for your wireless printer. I found I had to assign my print server a static address, which was 192.168.0.10
5. Input the Queue. This is probably takes the form of something like "PS-xxxxxx-U1" where the x's are numbers and U1 represents the USB printer you've assigned to the U1 port when you set up the wireless print server.
6. Select your printer at the bottom of the browser window and click Add.
This is the only way I was able to get my HP's to print.
Mac mini 1.42 Mac OS X (10.4.7)
Mac mini 1.42 Mac OS X (10.4.7)
Mac mini 1.42 Mac OS X (10.4.7)

Similar Messages

HP PSC 1315, Brother HL-2040 & D-Link DPG321 wireless print server

Hi all...I've had the D-Link wireless print server for awhile, and originally had an ancient Samsung attached to it.
Now though, the old Samsung printer is gone and I'm using the print server in my office with my new Brother HL-2040, which connected to my Mac effortlessly...super easy.
The problem comes in hooking up my HP PSC 1315 AIO to the wireless print server's second port. I've read a ton of postings in the last couple of days indicating the HP driver won't support this, so I downloaded the hpijs driver.
The Brother printer is hooked up to queue 1 (ps-5c714d-u1) per our documentation, and I'm trying to get the HP hooked up to queue 2 (ps-5c714d-u2), but absolutely nothing will print to it. One note - I'm not getting any error messages. When I pull up the printer to view the jobs, it looks like it's completed printing, so I'm not sure if it's stuck somewhere in the print server or what.
The HP works fine when connected directly via USB to my MacBook Pro - so the issue isn't with the printer itself or the cabling.
We CAN however, manage to print to the HP from our Windows XP desktop in the other room, interestingly enough.
MacBook Pro Mac OS X (10.4.9)

No, I didn't. Originally when I was doing all my research, I thought I only had to download that if I had Mac OS 10.2 or below...in retrospect now I'm not sure why I thought that.
I've now downloaded the file though, and have no idea what to do with it. In reading all of the installation info, I'm thinking it might just be easier to walk over to the printer and plug it into the USB port of my MacBook when I need to use it!
Thanks for the suggestion...not sure I have the constitution to keep fighting the good fight on this.

Wireless Print Server

I have a BTHub 3 connecting two wireless home PCs, all working well.
I would like to add a shared printer (HP LaserJet P2055d)
It is not possible to locate the printer with the BTHub3 and make use of the USB port.
I am looking at using a TP-Link Wireless Print Server but unsure if this is feasable and if so how to set it up

Hi PeterDee,
Welcome to the forum and thanks for posting. None of the versions of the BT Home Hub are designed to act as a print server. Connecting a printer to the USB socket won't work, and we don't support this. Some people claim that they've managed to share printers in this way. But the success might be specific to their printer and the Hub just doesn't support this feature. You might have better luck with the TP-Link Wireless print server. Let us know how you get on.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

DPR 1260 Wireless Print Server not recognized on Macbook Pro

Please help. I am a first time Mac user. I have a D-link wireless print server that is connected to a HP Office Jet 6200 all in one. For some reason I cannot set up the wireless print server. A couple questions: I enter the IP address when I set up a new printer. Still nothing. Do I need to select IP printing when setting up a new printer? Is D-link wireless printing supported by Leopard? When I plug in direct via USB - Mac prints no problem. Tech support really couldn't help - neither could D-link. Does anyone know step by step how to set up? Explain it to me like I'm 4 years old. Thanks.

You have two issues going at once.
Driver - There are two kinds of print driver on OS X (not like Windows) - Carbon and CUPS. CUPS drivers are required to use the standard network print protocols provided in OS X by the CUPS system - IP printing and Windows printing. But HP doesn't provide CUPS drivers for non-postscript printers. They provide Carbon drivers where they have limited the driver to USB only. To get a CUPS driver for your model, install the 3 part hpijs:
http://www.linux-foundation.org/en/OpenPrinting/macosx
Print & Fax prefs setup -
I call your attention to page 19 of the print server manual. Dlink simply has "no clue" about OS X. The easiest comm protocol for you is HP Jetdirect, which equals TCP/IP raw port 9100. That is for USB port 1 -- for the other USB ports you will need to use advanced setup in Print & Fax.
So, plug the printer into USB port 1 and set up using IP printer > HP Jetdirect protocol, selecting your new hpijs driver.
Good luck.

Sharing Linksys Wireless Print Server with MAC and PC - How to do?

I have lost the capability to share a printer on my network by using the Linksys Wireless Print Server-model number WPS54G -V2. Prior to having to return my previous Print Server on an RMA, I was able to use the MAC and PCs on my network. I have a PowerGook G4 with MacOS X 10.4.10. I also have a Airport Extreme Base Station V5.6. The printer on the network that is being shared is an Epson Stylus Photo 820. Recently, when trying to reconfigure the network, I updated the software on the Airport Extreme...so I think after that, I am no longer able to share this printer using current network configuration. As information, I will share how I got the network to share the printer BEFORE I had to replace the previous Print Server and BEFORE I updated the Airport Extreme. Please see this link:
http://www.macosxhints.com/article.php?story=20050406151311940
Even though this was for a different type of Print Server, this worked for me.
When reconfiguring the new Print Server, I contacted Linksys...as had some difficulty until I found out how to assign a static IP to the new Print Server. When trying to talk to them about the Mac issue, and sharing the printer, they shared this link with me...which may be helpful to some, but I found that this does not work for me...
http://www.macosxhints.com/article.php?story=20060404021600193
I have been trying to work through the issue, but feel I may now have some compatibility issues between the Airport Extreme and the Epson printer.
Further details are that I use 10.0.1.78 for the assigned IP address for the Print server. My router (which is the Airport address) is 10.0.1.1. I have tried IPP printing option, LPD printing option...and IPP printing at least returns a status on the Print Server as "printing" as opposed to "idle". I have checked the Print status on the Mac, and I have received two (2) different error messages as to why the print job failed. They are:
"the process "picwpstops" stopped unexpectedly with status 1"
and
"the process "rastertoprinter" stopped unexpectedly with status 1"
The latter happens when I follow the instructions on the second link I attached on this topic...with the only change being that I select IPP printing as opposed to LPD printing.
Anyone that has any insight into HOW to configure the mysterious settings for Mac OS printing so that it can be compatible with a Wireless Print Server, please feel free to comment. In the meantime, I am thinking that the links above could help some people...just not me at this point given my current configuration and versions of software/firmware and perhaps the printer I am using.
Greatly appreciate your consideration, and any suggestions to anyone that might understand what these error messages mean when checking the printer status after sending a file for printing.
Thank you

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

Using a wireless print server... help!

Hi. I have a G5 on a wireless network using a LinkSys WRT-54G router. I just got a wireless print server (D-Link DPR-1260) and want to network my HP 6110xi All-in-one printer. 6110 drivers are installed, and printer previously worked fine when connected directly to computer via USB port.
Now, I want to share it over the wireless network. I believe I have the print server correctly configured... just not sure how to configure my G5 to print across the network to this printer. How do I set it up?
Particulars:
- LinkSys WRT-54G, 802.11g wireless router, firmware v4.20.7 (192.168.0.1)
- D-Link DPR-1260, wireless print server, firmware v1.00 (192.168.0.10, static)
- HP 6110xi All in One, latest drivers from HP downloaded and installed.
- iMac G5, (192.168.0.100, dynamic IP)
Thanks for any help provided. Regards.

Hi JD77!
And Welcome to Apple Discussions
You have 2 computers respectively connected each to a printer.
DSL Modem (ethernet)
||
PC1 = Printer1 (USB) (Win)
PC2 =Printer2 (USB) (iMac)
PC3 WIFI WinXP laptop
The iMac has built-in Bonjour technology. So use that. If your windows PC has XP you can download Bonjour for that one as well and use that to share your printer.
What you can do is use the Airport Express and connect it to a USB printer. Make sure that it is compatible printer.
Here are some articles you can read:
AirPort Express: How to join an existing wireless network in client mode
Windows printer for AirPort Extreme and AirPort Express
Bonjour for Windows 1.0.3
AirPort Express (FAQ)
Hope this helps

HP DeskJet 712c Driver and Wireless Print Server Setup

I have recently purchased a MacBook Pro and am unable to setup my printer to print. Previous to using the MacBook Pro I was using a windows machine without any trouble printing to this printer, however now I can't locate the printer on a list of pre-installed drivers for Mac. I've already checked HP's website and was unable to find any drivers that were for Mac OS. What is a good alternative driver source? Once I do get the driver what would my next steps need to be to set up the wireless print server to work with my mac?
Printer: HP DeskJet 712c
Wireless Print Server: D-Link DP-311P
I would be grateful for guidance to go about this process so that I can use my printer again.
MacBook Pro 2.16GHz Mac OS X (10.4.6)

HP-provided drivers don't support network printing. You'll need to install Foomatic (a PPD interpreter), ESP ghostscript (postscript translator) and the 712c PPD from:
http://www.linuxprinting.org/macosx/foomatic/
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-DeskJet712C
Then, since we don't have the auto-setup software for OS X, you need to review the print server manual and find out which IP printing protocol to use. The easiest is HP Jetdirect (called TCP/IP raw port printing in many manuals) if it's available, because it doesn't require the device queue name.
Good luck.

Wireless print server setup

Have an HP 2355 which was hooked up local to Mac G5 10.4.10. Wanted to allow windows laptops to print to HP so set up 2355 with Linksys wireless print server. Windows PC's find server and print but G5 doesn't. Where can i get some general direction (thats not too technical) as to how to link the G5 to the print server? Thanks in advance. Sorry, I'm a novice at this stuff.

You need two things -
First, the HP-provided driver (on OS X) was written to only support direct USB printing, so you need a CUPS driver. Check here to find that and install it:
http://www.linux-foundation.org/en/OpenPrinting/macosx
(click on "printers" in the blue bar and look up your printer.)
Next, you need to read your print server manual and figure out what comm protocols are supported and then enter the right info into the Add printer dialog. For example, the print server's queue name (also called port name) is a required entry (not default) for the IP > LPD and IPP protocols. If the print server supports TCP/IP raw or port 9100 or socket printing, those terms are all equal to the IP > HP Jetdirect protocol on OS X. That protocol doesn't need a queue name, so it's usually easier for Mac users. I think L1 or P1 are typical queue names on Linksys servers.
If you need more help, I need to know the print server model #.

CM1015 on wireless print server; ToolboxFX Can't access

(This is crossposted at the Business Support forum as well).
I have the CM1015 connected via a Netgear WGPS606 wireless print server. Using the Netgear installation util, the IP connection and printing to it work fine. Success there.
However, ToolboxFX can't access the printer, taking a v-e-r-y- long time to respond before throwing an error msg: The server could not find the request. (404) ...Please cycle power bla bla... Of course cycling power doesn't help.
The topic at
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=1846080&prodTypeId=18972&prodSeriesId=1846080&objectID=c00785211
seems almost relevant, but not really, as the only IP I have is for the print server, not the CM1015 itself. Needless to say, scan-to-remote computer does not work. Disabling the OS firewall does not solve the problem.
Anybody run across a solution for what should be a common problem?
The drift from other frustrated users here seems to be that using a CM1017 connected to a wireless router might get you there. But, like other midrange printers (eg certain Canons), the CM1015 was never really meant to be networked. HP seem mute on the subject...
Message Edited by seacrow on 11-24-2008 12:19 PM
Message Edited by seacrow on 11-24-2008 12:20 PM

I opted to use ".com.na" in which case the Internal Domain Name and Internet Website
now has the same name.
This ends up with a split-DNS stup for internal and external resolution which requires extra administration tasks and attention from the administrators.
When attempting to open the extarnal website eg. "www.company.com.na" from a client PC within the internal "company.com.na" Domain, I keep getting error "403 - Forbidden: Access is denied. You do not have permission to view
this directory or page using the credentials that you supplied."
I should also mention, the website is hosted by an ISP and not locally.
I added a "www" Host record in the Forward Lookup Zone, I have added the url and ip address to the Hosts file on a client pc (Windows 7) and even tried setting up Split-Brains DNS. Nothing seems to work.
Running a Tracert takes me to the correct public ip address of the website, but I keep getting this 403 error.
This means that you are able to reach the Website but it is responding with the access denied error message. That should be checked on the middleware level so if this is IIS running then I would recommend asking them in IIS forum: http://forums.iis.net/
If this is a Website that is completely managed by your ISP then I would recommend checking with them.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Can't connect wireless print server

I've been pulling my hair out trying to configure a D Link DPR-1260 wireless print server to work with a D Link wireless router on my system. I know I probably should have used Airport devices but then again I've always had trouble getting those things to talk to each other, too. Must be bad wifi karma or something. I've posted at the D Link site as well but they don't have many Mac users who can help with the setup. Anyone got a tip?

Hi Bennyk-
What is the specific problem?
Luck-
-DaddyPaycheck

Wireless Print Server Compatibility

I have a Netgear WGPS606 wireless print server and I was wondering if anyone knows if I can connect to it with OS X. Netgears site didn't say anything about it. Anyone know?

I had the same problem with my Netgear Print Server and there is no help directly on the Netgear website. However, a search on Google revealed the following link from one of the Netgear forums:
http://kbserver.netgear.com/kbwebfiles/N101570.asp
After following all the instructions I still wasn't able to get it to work until I did the following:
1. I use Netgear's WNR854T wireless router (RangeMax) and it doesn't seem to recognize the default IP (192.168.0.102) of the Print Server (PS). In my case, I had to change the PS's IP address so that it fell within the range set on my router; in my case it was 192.168.1.102.
2. Next you need to set the new IP address for the PS as a static address in your wireless router. Do not rely on the router's DHCP settings (if you have your router set-up this way) to properly route the printing information.
Check to make sure your Mac can now ping the PS with its new IP address. The terminal screen will show the PS continually being pinged, so once it successfully transmits its few bytes of data you can close the terminal.
3. Now follow the directions as stated in Netgear's document noting the change in the PS's new IP address. Make sure you don't input the IP address stated in the document as it was your old default address.
You should now be able to print documents.

HP webservices tab not available when using HP Jetdirect 2700w wireless print server

I recently bought HP Laserjet Enterprise 500 m551 dn color laser printer with HP jetdirect 2700w wireless print server ( one day old at this time).
I was able to configure the device and enable/ use eprint services using the embedded server with a wired connection.
However when I attach a the mentioned wireless print server, the "Webservices" tab disappears from the configuration website, the printer reports that the eprint services are not enabled and ofcourse hp eprint or google cloud print do not work. The printer appears offline at eprintcenter. Everything else works fine.
On the product website for the wireless server, it clearly states that this is compatible with eprint services.
What am I doing wrong.
Arjun
HP Laserjet Enterprise 500 m551 dn color laser
HP Jetdirect 2700 w wireless print server
Win 7 Ultimate x 64
Netgear WNDR 4500

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Jetdirect board here:
http://h30499.www3.hp.com/t5/Print-Servers-Network-Storage/bd-p/bsc-254
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Resolution - Printing HP LaserJet & Linksys Wireless Print Server WPS54GU2

Hello Guys:
After trying to figure out for 10 days and calling HP, Applet and Linksys support, i finally am able to print to my printer.
I have iMac running Tiger 10.4.8. I have a HP LaserJet 1012 Printer connected in a USB Port to the Wireless Print Server WPS54GU2. This is what I did to get it working.
First install the following drivers:
1) Go to http://www.linuxprinting.org/macosx/hpijs/ and download hpijs-foomatic-2.0.2.ppc.dmg and espgs-7.07.1.ppc.dmg file. Install hpijs first and espgs second.
2) After that Go to Server Preferences, Double click on Print/Fax.
3) Click on the "+" sign, select Line Printer Daemon - LPD
4) In the Address field, enter the IP address of your print server.
5) In the Queue name (This is very important). I used L2 for USB. You can try P1, L1 as well. Not sure how you have connected to the print server. For me L2 worked. I had tried using L1 and P1 and it didn't work for me.
6) The Name field should automatically be populated.
7) In the Print Using, select HP and then select "HP LaserJet 1012 Foomatic/hpijs" as the printer or whatever driver you have for your printer.
8) Click on Add
And now open up text edit or something and you should be able to print.
let me know if there are any questions.

Try Repairing permissions (Disk Utility). Then restart, then add again.
What do you mean by the printer doesn't show up - the driver (print using:)?
You can try the generic HP Photosmart P1100 Gimp-Print driver that comes in OS X.

Airport Express questions on wireless print serving

I have a wireless network setup using a linksys router and thinking about using an Airport Express as a wireless print server in another room. I currently have a Canon MP500, 2 wired PCs connected to the router and 2 wireless laptops one Windows and an iBook. Would the Airport Express connect to my existing wireless network to act as a wireless print server for my network?
Thank you
PCs running Windows XP Pro and iBook is running OS X Tiger

Hi, does anyone know how to change the port setting on Windows XP Pro. I recently purchased an Airport extreme and the network is working great, however when I tried to set up the printer the documentation left some key peices of information out.
I had followed the step for installing a printer, but when I got to the point about specifing the adapter type, the documentation in the manual that came with the Airport skipped over that part. I guessed at the adapter and unfortunatly (and obviously after reading the instructions here http://www.ifelix.co.uk/tech/1008.html) I chose the wrong adapter. Now I want to go back and fix it but I can't figure out how. When I tried to run the add printer wizard again and the port setting wizard it said the port (IP_10.0.1.1) was alread in use and kicked me out of the wizard.
How do I change the settings on the port to the correct settings?
Thanks
Dell laptop Windows XP Pro

How to set up standalone wireless print server

I need step-by-step instructions on to set up a KonicaMinolta bizhub multifunction printer to print wirelessly from various Macs. In other words, it would not be hooked up to the internet or my wireless network. I understand this can be done with an AirPort Express or AirPort Extreme. I tried it with a Linksys WPSM54G wireless print server without success. I'd like to try the AirPort Express, but so far haven't been able to get it to work.
How do I configure my AExp to operate as a print server? How should I have it connected when I do the configuration?
How do I find the print server's IP address?
When I plug in the AExp and connect it to the printer via USB, the AExp flashes amber and never turns green (and therefore never connects with the MacBook).
If I successfully set up the print server as a separate network, can I be connected to the printer and my wireless network at the same time? Or do I need to switch back and forth?
If I'm accessing the internet via Ethernet, can I simultaneously access the printer via AirPort?
Any help will be greatly appreciated.

How do I configure my AExp to operate as a print server?
The AirPort Express Base Station (AX) or AirPort Extreme Base Station (AEBS) can only operate as a "print" server if the printer is attached to its USB port. Ethernet printers would require their own print server service if connected by Ethernet to either router.
How should I have it connected when I do the configuration?
Neither router would need a WAN port connection as both can provide a stand-alone wireless network. For a USB printer, it would need to be connected to the respective router's USB port.
How do I find the print server's IP address?
This would be the AirPort's LAN IP address. The default is: 10.0.1.1
When I plug in the AExp and connect it to the printer via USB, the AExp flashes amber and never turns green (and therefore never connects with the MacBook).
The flashing amber indicates that the AX has configuration issue. If you temporarily connect your MacBook directly to the AX's Ethernet port, and then, run the AirPort Utility, you can find out what the issue(s) is(are).
If I successfully set up the print server as a separate network, can I be connected to the printer and my wireless network at the same time? Or do I need to switch back and forth?
No, you would have to switch wireless networks. One way around this, is to have the AX configured to "Join a wireless network." This mode was specifically designed to allow the AX to perform as a wireless client and simultaneously provide both print sharing and iTunes streaming to network clients.
If I'm accessing the internet via Ethernet, can I simultaneously access the printer via AirPort?
Potentially, but your computer and the printer will be on separate broadcast domains/subnets.

D-Link Wireless Print Server

Similar Messages

Maybe you are looking for