D.O.T - Is it Possible to Change/Increase the Default Values?

Well, I reckon it isn't, otherwise people wouldn't be recommending to not use D.O.T and just use manual overclocking. However, I figured I would ask anyways, seeing as D.O.T is quite a useful feature that I would like to use.
My situation is I have a P4 2.8C which runs stable at 3.5GhZ. Obviously, for the fastest speed, I use manual overclocking with the system clock at 250Mhz. The maximum D.O.T will overclock to is somewhere around 230Mhz. Not bad, but then again, still noticeably slower. So I was curious if it were somehow possible to change the default D.O.T overclocking values to tailor them to your specific maximum speed. Thanks in advance for any replies.

Hmph...
That's really a shame, considering they could have had an alternative to Intel's Enhanced Speedstep which hasn't even been released yet on their newer chips. Seems to be a waste to have this special corecenter chip and dynamic overclocking feature, yet have it's hands tied when it comes to speed.

Similar Messages

Is it possible to change what the "Slide to Unlock" says? I was told you could personalize it to say whatever you want.

Is it possible to change what the "slide to unlock" says? I was told you could personalize it to say whatever you want.

yes you can change is there are some free and some paid apps in the apps strore search them and you will find then
<Edited By Host>

Is it possible to change just the ram on the motherboard (G5) or do you have to change the motherboard?

Is it possible to change just the ram on the motherboard (G5) or do you have to change the whole motherboard?

I do understand that... but this is the problem - The computer freezes when it is put to sleep (and sometimes more frequently). Apple told me that it could be three things: ram, hard drive or the motherboard. - take the ram out and then put the computer to sleep, if it still freezes than it is one of the other two and not the ram. They told me that there is ram on the motherboard. So I tried that and the computer wouldn't even boot up. So I thought the problem is the motherboard and possibly the ram on the motherboard. I really have no idea what I am doing, I just don't want to have to throw a $3,500 (when new) computer away.
Thanks!

IS IT POSSIBLE TO CHANGE DINAMICALLY THE SOURCE OF A QUERY?

IS IT POSSIBLE TO CHANGE DINAMICALLY THE SOURCE OF A QUERY, AND TO SHOW DATA FROM DIFERENT TABLES, BASED IN USER PARAMETER VALUE?.
EXAMPLE:
IF USER PARAMETER = 1 THEN
SELECT COLUMN1 FROM TABLE1
ELSIF USER PARAMETER = 0 THEN
SELECT COLUMN2 FROM TABLE2
END IF;
ANY OTHER IDEA??
THANKS FOR HELPS.

Read the online help about lexical parameters.
Select a from &p_1
should work.

Mac version - Is there a possibility to change to the windows version?

Hello Adobe team,
I bought an Adobe Creative Suite 6 Master Collection as "Student and Teacher Edition" for MAC in 2013. I am now working in a pure Windows environment and would like to exchange the product in a Windows version. Alternatively, I could also imagine to sell my software and to use the cloud version. What are my options? 1. Is there a possibility to change to the windows version? 2. Is it allowed to sell the “Student and Teachers Edition”? And if so, only to students and teachers? THANKS for the help! The software was quite expensive ...

2. Is it allowed to sell the “Student and Teachers Edition”?
No. The whole point of the special licensing is that it's meant to support people in education or else the low price wouldn't exactly make sense - if everyone just bought used edu licenses, Adobe would bankrupt in a predictable timeframe.
1. Is there a possibility to change to the windows version?
Order product | Platform, language swap
Mylenium

Change manually the defaulted Tax code in PO

Hello!
I would like to know if it is possible to change manually the tax code in the PO item defulted from the PIR.
Currently the field is display only. I checked the screen layout definition but I didnt find the Tax code field there.
Thank you very much in advance!
Kind regards,
Mariya

Mariya Petkova wrote:
Hello!
>
> I would like to know if it is possible to change manually the tax code in the PO item defulted from the PIR.
> Currently the field is display only. I checked the screen layout definition but I didnt find the Tax code field there.
>
> Thank you very much in advance!
>
> Kind regards,
> Mariya
Hi Mariya,
It is there..
Go to
IMG> MM> Purhasing > PO> Define Screen Layout
Here double click on field selection ME21N and in the new screen double click on GR/IR control which will display Tax-Code field.
Regards
Shiva

How to submit a bug report for OSB? - restore fails if number of items per page is changed from the default of 30

In the OSB web gui, one of my users found that if the number of items per page is changed from the default of 30, the restore of the file will fail. He tested this using recent versions of Firefox and IE. We have verified this to also be the case using Chrome.
In a directory containing over 100,000 files, moving 30 at a time to find the one to be restored is a very frustrating user experience.
How do I file a bug report for this issue? Is there a workaround for this bug to enable my users to more easily find the file to restore without being restricted to the default of 30 items per page?

Yes there is a bug in the webtool in the current release. You can use the commandline obtool to do the restore, that is much faster and works fine.
Thanks
Rich

How can I change the default value of a command ?

I want to be able to change the default value of a comand when the vi
is running. (I know how to do that with a right click when the vi is
not running).
In fact I would like the user of the vi to be able to choose a new default value for a command.
How can I do that ?

You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
Try to take over the world!

Change documents for default values in user profiles

Dear Experts,
Please let me know if there are any tables to find the changes that have been made to the default values in a user profile.
Regards,
Lakshmi.

Hi,
as the defaults are not considered as critical, changes are not recorded in change documents.
b.rgds, Bernhard

HT4972 after upgarding to 5.1 I can't change from the default ringtone??

how to change from the default ring tone...I have tried to cgange using settings...does not work

What happens when you try? Does it not accept the change? Does it show that it changed but does not actually change?
Basic troubleshooting from the User's Guide is reset, restart, restore. Has any of that been tried?

Any changes in the condition value then system should trigger a mail.

Hello Experts,
I have below requirement
If user does any changes (increase the price /decrease the price) in the condition value then system should trigger a mail and goes for approval.
How i can achieve this ?
Thanks

Hi
In that case again you can use MV45AFZZ program and USEREXIT_PRICING_PREPARE_TKOMP. If this exit didnt work you can try in other save or prepare to save exits in this same program. For order statuses and authorization you can use status profile and control authorization through an authorization object. For email use email sending function and users will receive an email whenever some specific condition value is changed.
This will be ABAP coding in above mentioned program using implicit enhancement. There is no standard solution for this and you have to go for customization.
Thank$

Why do my bookmarks keep changing to the default every time I close Safari?

Why do my bookmarks keep changing to the default every time I close Safari and why does my history keep clearing?
I want to save my bookmarks for my favorite pages but every time I close Safari the default ones (Apple, iCloud, Facebook, Twitter, Wikipedia, Yahoo, News and Popular) re appear.
Basicaly I want Google instead of Twitter and Yahoo and I also don't want it to keep clearing my history.

Step one is to log into a newly created admin user account and see if the problem persists.

Changing the default value of "Items Due" in iProcurement 11.5.9

Is there anyway of changing the default value of 'Today' that appears in the Item Due field when doing an expanded search on Receive Items? We would like this set to 'Any Time' which is more useful to us.
Is there anyway of changing the default value of 'Today' that appears in the "Requisition Created" field when doing an expanded search on Requisitions in iProcurement? We would like this set to 'Any Time' which is more useful to us.
We are on 11.5.9
Thanks in advance...
Regards,
Sajid

You should be able to do that, read my reply on this thread below on iProcurement page customization in 1159.
Adding item to exiting AK Region
Thanks,
Tapash

How do I change/save the default font in mail from helvetica to something else?

How do I change/save the default font in mail from helvetica to something else?

Mail > Preferences > Fonts & Colors > Messages font:
Click the "Select" button next to "Helvetica 13" textbox.
Select your choice from the window that opens up.

Audit of attribute value change: is the old value available?

When changing the value of an user attribute in the FIM Portal, the new attribute value is properly logged. This can be read in the request and in the standard report FIMUserHistory.
The question is, what about the old value that was replaced? Is the old value available in the Data Warehouse somewhere, so one can make a report or is it gone forever (of course one can find the old value by looking at the previous attribute change or creation
event, but this could be too long time ago)?
Thanks for helping,
Didier.

As far I remember (I don't have access to test FIM Reporting now) in reports stored on Data Warehouse, there is no such thing as "old value". But as far I remember it, also very old data is stored there, so there can be something like:
User: JJK003 -> New attribute (mail) value: [email protected] (12.12.2013)
User: JJK003 -> New attribute (mail) value: [email protected] (12.02.2014)
so, if you look closely to a history and sort it by user - you can determine what was the old value.
http://technet.microsoft.com/en-us/library/jj133843(v=ws.10).aspx
In report, you have always most recent display name of this user and of attribute's display name, but history should show what value was inserted long time ago and what value was set a week ago - than you know what value was there previously.
But please be aware that users report, according to TechNet, does not include all properties:
This report provides information about changes to key attributes on user resources in FIM, including account name, email, job title, and
employee start/end date.
Keep trying

D.O.T - Is it Possible to Change/Increase the Default Values?

Similar Messages

Maybe you are looking for