D:\oracle\product\10.2.0-Console access problem-please help urgent.

I have installed D:\oracle\product\10.2.0, each times i create a db on it the console work fine, but when I close my computer then restarts it I can get in to the console again.
some people said that one shouldn't be on net while installing it, so I wasn't on net.
Then I tried to start the service as windows service it can not start.
where can I look in the oracle config ? to deal with the problem ?
Thanks.

Is your computer configured with DHCP? If so, did you configure the loopback adapter?
http://download-east.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#BABGCEAI
Logs are written to ORACLE_HOME/<machine_name>.<dbsid>/sysman/log

Similar Messages

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

Hello, I have a problem with my Yahoo Messenger, I can't join in chatroom. It's prompting like "yahoo error, you've been refused to access"..please help me..thanks

Hello, I have a problem with my Yahoo Messenger, I can't join in chatroom. It's prompting like "yahoo error, you've been refused to access"..please help me..thanks

post in a yahoo messenger forum. These forums are for apple products and software.

My computer crashed before i was able to deactivate my Visual Communicator 3 software. Please help! I have my disc, but cannot activate my software again. I have several projects that I cannot access. Please help!

My computer crashed before I was able to deactivate my Visual Communicator 3 software. Please help! I have my disc, but cannot activate my program again. I have projects that I cannot access. Please help!

I wish I could help, but I am in a similar situation.
I need to deactivate it because we are getting rid of the computer it is on and are buying a new one. When I go to Help there is no Deactivate option. The only options are: "Help", "Hide Coach", "Tip of the Day", "Adobe Website", "Technical Support Website", "Frequently Asked Questions", "Check for Updates", "Register", "Download e-License..." (Greyed out), "Return e-License..." (Greyed out) and "About Adobe Visual Communicator 3". I spoke with support through chat and they said my product was no longer supported.
Patrick

I have an account in Apple Astor was not able to access it, please help me in this matter

I have an account in Apple Astor was not able to access it, please help me in this matter
<E-mail Edited by Host>

What to do if your iPhone will not turn on

Oracle Designer Problem Please help me

Sir,
1) I created a database
2) Run>cd d:\Oracle_home\repadm61\admin\@ckqa
@ckparams.txt
@ ckvalqa
@ ckcreate
3)Opened Repository Administration Utility
Log in as 'repos_manager/repos_manager@orcltest'
Installed Repository.
4) Opened Oracle 9i Designer. I am able to connect
as 'repos_manager/repos_manager@orcltest'
But I am not able to logon as any other user in same database/ any other user in different database. Why?
Please help me.
regards
Mathew

duplicate thread, see this one -> Re: Oracle Designer Problem Please help me

Oracle EBS R12 installation by newbie...please help.

Dear Experts,
I wanted to learn E-Biz suite R12. So thought of installing R12 on external hard disk and use it with laptop. I googled and in our otn forums also, but i am confused about the steps which i need to do for successful installation.
My current configuration:
Dell Laptop : 4 GB RAM, 300 GB harddisk, Windows 7
External Harddrive : 2 TB (specially bought for installing EBS and my learning activity)
as per other forum post, i will increase RAM to 8 GB
I wanted to install EBS on external hard drive and access it via my laptop.
can any suggest any step by step material where i can do the installation successfully...I heard we need to install virtual box/vm ware , template etc...i am bit confused. can you please guide me to do please.. can i install VMware on usb hardrive, and then windows 7 on top of it and then ebs on top of that.....
please guide.
Best regards
Prasanth

Hi Prasanth,
I believe you are currently in Windows environment. Most of the production environment will have Unix i.e either Solaris, HP-UX, Linux and etc. So that is the reason you will have to install Linux for example in the VMware(Non-Oracle product) or Virtual box(Oracle product) in order to create a virtualized enviornment, and afterwards proceed with R12 Installation.
If you are wish to try installing R12 without a virtualized enviornment then you may install it on the host itself (windows environment) without installing VMware/Virtual box
You may follow the below notes for R12 Installation on different OS.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 (Doc ID 761564.1)
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 (Doc ID 761566.1)
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) (Doc ID 761567.1)
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for IBM AIX on Power Systems (64-bit) (Doc ID 761569.1)
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for HP-UX PA-RISC (64-bit) (Doc ID 762894.1)
Otherwise, if you wish to do the installation A-Z, but rather want a template of an EBS, you can follow the below note:
Introduction to Oracle VM, Oracle VM Manager and EBS template deployment (Doc ID 1355641.1)
BEST OF LUCK with your Installation
Thanks &
Best Regards

I updated to OS X 10.9.2 and turned on my calendar sync in iCloud, now my calendar is unavailable and shows moving calendar to server acount for 3 days. Not sure how to reset or gain access? Please help!

I updated to OS X 10.9.2 and turned on Calendar sync in iCloud, now my calendar is unavailable and shows "moving calendars to server account" for 3 days. Not sure how to reset or access calendar. I can only force quit the app and when I restart it, it goes right to the same message. I have also tried turning off the sync in iCloud to no avail. Please help. I need my calendar!

Try the solution posted by melosaris here: https://discussions.apple.com/message/23475967#23475967.

Hi after my elements 11 downloading to my mac for the last 1hr 30mins it got to the last 30secs and says i don't have permission to access it please help

I've recently bought a mac please help.. after mislaying the mac disc which was included in elements 11 ( on my main tower i installed the windows disc in the box with no problem) i spoke with adobe who gave me a link to download for my mac the use the same serial number... the problem is it downloaded until the last 30 secs then error came up i don't have permission to access the request.
please help

HT201304 Hi, i have the latest iPad and I am trying to create an iTunes account but I'm having problems doing so. I am in Jamaica and don't know if my location is affecting my access. PLEASE HELP!!!!!

Can somebody please help me to create an iTunes account. I have the new iPad and I livein Jamaica, I don't know if my location is interfering with my access. Can somebody help?

idk what happened but now it's fine lol sorry

N95 8gb One access problem:( plz help

Hello there
I got N95 8gb , i tried using the one touch access problem using both bluetooth and usb cable. Both didn't work.
I also tried the older pc suite which i used to use with my N80, but it ididn't work.(it worked perfectly when i had N80) .
Any suggestions?

What version of PC SUITE are you using? Upgrade to the last one 6.86.9.0
Información sobre Symbian / NSERIES en Español en http://symbianespanol.wordpress.com

Huge Oracle Problem please help!

Hi All,
Our PB app that has been working for the past 8 years all of sudden (today) seems to have a huge problem with Oracle: when one record is updated, 23000 other records are being updated with the same data! That's why I am still at work at midnight!
here is the sql stmt captured at the sqlreview event when the dw_1.update() is being called:
UPDATE "MASTERNAME" SET "SLCO_PIN" = :1, "UPDATED_BY" = :2, "UPDATED" = :3 WHERE "MNI_ID" = :4
the problem started at 11:22 am on 06/28/2005, again at 2:13 pm. Then I tested for hours and it did not happen again. But at 10 pm, it happened again.
I have been checking all the triggers for such an unthinkable problem and I don't see any trigger that does a massive update like this! Remember, it has been working in the past 8 years with the same update statement and I have not made any changes recently.
We are using PB7.0.3 build 10180, Oracle 9.2 standard edition. We recently downgraded Oracle Enterprise edition to standard edition (on 5/29/2005). Ever since we have been having strange problem but I am not the DBA and I am only a consultant here.
Anyone has had similar problem? Appreciate any help and thanks a lot.
ben

Hi Damir,
Basically, it's possible the NLS_LANG parameter for your
database install is invalid or isn't a available default
value. This is a known problem.
I didn't any specific about one connection route working
and the other not, as in your case. However, I did find
some information on this problem when connecting through
Developer to a DB install.
The quick fix is to ensure your client initialisation
files have the 'NLS_LANGUAGE' parameter commented out.
If the client doesn't have an "NLS_LANGUAGE" parameter
entry the client and server use the language parameter
indicated by the server.
If that doesn't work (or you want to keep this parameter)
check the NLS_LANG parameter in the DB using your working
SQL*Plus connection. Try a default value like:
AMERICAN_AMERICA.US7ASCII
Also, you can try this:
SELECT * FROM sys.v$nls_valid_values;
Whatever you set for NLS_LANG should exist in the values
returned for this query, otherwise you'll get the error.
Unfortunately, resolving NLS_LANG issues is not always
this easy. If commenting out or changing the parameters
above still doesn't fix the problem, it is possible you need to reinstall the DB and choose the default language option. How you do this depends on the installer options
for DB version you are using.
One last point - I suggest you post your query to the
Forms & Reports forums here on OTN too. This forum is
ideally for Designer, rather than Developer questions.
Hope all this helps.
Regards,
Dominic
Designer Product Management
Oracle

ZenWorks Oracle database problem, please help!

Hi,
we have problem with Zenworks 6.5sp2 database. This database is on Oracle
10g server (SUSE Linux Enterprise Server 9). We prepared the clean
database. When I start the inventory servise, following error are in the
migration log file:
Starting the AlterProcedure Log at 2006-06-20 13:09:09.755
Unzipping the file migrate.zip
About add t$Class table,Supportpack,Productedition,File
Supportpack t$ClassID:ORA-00001: unique constraint
(MW_DBA.I$CLASS$CLASSNAME) violated
ProductEdition t$ClassID:ORA-00001: unique constraint
(MW_DBA.I$CLASS$CLASSNAME) violated
file t$ClassID:ORA-00001: unique constraint (MW_DBA.I$CLASS$CLASSNAME)
violated
and following errors in the end of log file:
ORA-01950: no privileges on tablespace 'CIM9'
managewise->create index i$User$storer on managewise.t$user(all_columns)
tablespace cim9 pctfree 0 is being executed
Could not do the operation. details:ORA-01950: no privileges on
tablespace 'CIM9'
ErrorCode:1950
Totaltime taken for Schema Migration : 5616
Migration Exception Message->ORA-01950: no privileges on tablespace 'CIM9'
, SQLState->42000, ErrorCode->1950
Any tip???
Josef

We set up a new oragle 10 g1 database, and followed the instructions
from Novell's documentation about setting up teh oracle database. We
configured and ran the inventory service on Netware, and on SuSE linux.
In both case, we got this error:
com.novell.zenworks.desktop.inventory.storer.MainT hread.run(MainThread.java:976)
[6/16/06 13:20:54.292] ZENInv - Storer: MainThread-1 position:
com.novell.zenworks.desktop.inventory.storer.Datab aseException:
ORA-00001: unique constraint (MW_DBA.SYS_C004544) violated
Rest of hte log file is here:
at
com.novell.zenworks.desktop.inventory.storer.Datab aseOperator.executeUpdate(DatabaseOperator.java:25 44)
at
com.novell.zenworks.desktop.inventory.storer.Insta lledFile.loadFromTemp(InstalledFile.java:215)
at
com.novell.zenworks.desktop.inventory.storer.Parse .addNullsDuringFULLScan(Parse.java:3609)
at
com.novell.zenworks.desktop.inventory.storer.Parse .parse(Parse.java:4119)
at
com.novell.zenworks.desktop.inventory.storer.MainT hread.run(MainThread.java:976)
[6/16/06 13:20:54.293] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.305] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.319] ZENInv - Status Reporting: Adding record 0 for
DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.388] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.388] ZENInv - Storer: MainThread-2 position:
[6/16/06 13:20:54.389] ZENInv - Storer: MainThread-2 position(determined
that connection is closed):
[6/16/06 13:20:54.500] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.512] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.526] ZENInv - Status Reporting: Adding record 0 for
DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.588] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=Inventory Service_oes1.O=novell
[6/16/06 13:20:54.588] ZENInv - Storer: Connection restored.Retrying the
str file 00B0D0DFA1B1_1150292302000_1.STR
[6/16/06 13:20:55.192] ZENInv - Storer: Loading Storer test properties file
[6/16/06 13:20:55.192] ZENInv - Storer: Storer: started storing
00B0D0DFA1B1_1150292302000_1.STR (122146 bytes)
[6/16/06 13:20:55.220] ZENInv - Storer: dn: CN=RWALKERDESKTOP.O=novell
tree: CGISTESTTREE
[6/16/06 13:20:55.220] ZENInv - Storer: tree: CGISTESTTREEwsdn:
CN=RWALKERDESKTOP.O=novelltime: 1150293040000
[6/16/06 13:20:55.220] ZENInv - Storer: Initial WS statusrecord is found
[6/16/06 13:20:55.221] ZENInv - Storer: got the status log
[6/16/06 13:20:55.259] ZENInv - Storer: [FULL]DELETING ALL PRODUCTS
[6/16/06 13:20:55.881] ZENInv - Storer: Products=108 Sw_Times = 120 108
0 0 53 50 0 0 264 108 4 1 TotalTime=561
[6/16/06 13:20:56.528] ZENInv - Storer: FileCacheHits=172 : 172
[6/16/06 13:20:56.938] ZENInv - Storer: ws deletetime : 258
[6/16/06 13:20:58.273] ZENInv - Storer: time for getting unique object: 77
[6/16/06 13:20:58.526] ZENInv - Storer: Some Database Exception
com.novell.zenworks.desktop.inventory.storer.Datab aseException:
ORA-00001: unique constraint (MW_DBA.SYS_C004544) violated

Oracle.DataAccess problem please help

I have an asp.net mvc (EF) project , I had downloaded oracle data provider with version 4.112.2.50 -32bit on my pc when moving project to windows server 2008 (I have the same version of odp-64bit) I have the below problem:
Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. An attempt was made to load a program with an incorrect format.
when I toke Oracle the "Oracle.DataAccess.dll" from the server and make it with my project reference I have another error message like the above with a file "Oracle.Web"
Could not load file or assembly 'Oracle.Web' or one of its dependencies. An attempt was made to load a program with an incorrect format.
also if I get the File "Oracle.Web.dll" to my project reference from the server I have the same error with "Oracle.Web"

Hi Damir,
Basically, it's possible the NLS_LANG parameter for your
database install is invalid or isn't a available default
value. This is a known problem.
I didn't any specific about one connection route working
and the other not, as in your case. However, I did find
some information on this problem when connecting through
Developer to a DB install.
The quick fix is to ensure your client initialisation
files have the 'NLS_LANGUAGE' parameter commented out.
If the client doesn't have an "NLS_LANGUAGE" parameter
entry the client and server use the language parameter
indicated by the server.
If that doesn't work (or you want to keep this parameter)
check the NLS_LANG parameter in the DB using your working
SQL*Plus connection. Try a default value like:
AMERICAN_AMERICA.US7ASCII
Also, you can try this:
SELECT * FROM sys.v$nls_valid_values;
Whatever you set for NLS_LANG should exist in the values
returned for this query, otherwise you'll get the error.
Unfortunately, resolving NLS_LANG issues is not always
this easy. If commenting out or changing the parameters
above still doesn't fix the problem, it is possible you need to reinstall the DB and choose the default language option. How you do this depends on the installer options
for DB version you are using.
One last point - I suggest you post your query to the
Forms & Reports forums here on OTN too. This forum is
ideally for Designer, rather than Developer questions.
Hope all this helps.
Regards,
Dominic
Designer Product Management
Oracle

Oracle connection problem - please help

Hi.
On my Win2k machine I first installed Oracle Developer 6.0 in C:\ORANT.
After that I also installed Oracle in C:\ORACLE.
I always used sqlplus C:\ORACLE\BIN\SQLPLUS.EXE till now. Now I have to
use Forms builder to complete my homework. The problem is that I can't
connect to my Oracle database with Forms builder.
I try to solve my problem by comparing runs of C:\ORACLE\BIN\SQLPLUS.EXE
with C:\ORANT\BIN\SQLPLUS.EXE (from developer tools). So I execute:
- sqlplus my_user/my_pass@testconn
in each directory. In the C:\ORACLE\BIN (using sqlplus that come with
Oracle database) all works fine, while in C:\ORANT\BIN (using sqlplus
that come with development tools) I get an error:
- ORA-12705: invalid or unknown NLS parameter value specified
I try to fix the problem by editing copying connection data from
C:\ORACLE\network\ADMIN\tnsnames.ora to
C:\ORANT\NET80\ADMIN\tnsnames.ora, but this didn't help.
Can someone help me?
My tnsnames.ora:
TESTCONN.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SID = MYSID)
[i]Long postings are being truncated to ~1 kB at this time.

Hi Damir,
Basically, it's possible the NLS_LANG parameter for your
database install is invalid or isn't a available default
value. This is a known problem.
I didn't any specific about one connection route working
and the other not, as in your case. However, I did find
some information on this problem when connecting through
Developer to a DB install.
The quick fix is to ensure your client initialisation
files have the 'NLS_LANGUAGE' parameter commented out.
If the client doesn't have an "NLS_LANGUAGE" parameter
entry the client and server use the language parameter
indicated by the server.
If that doesn't work (or you want to keep this parameter)
check the NLS_LANG parameter in the DB using your working
SQL*Plus connection. Try a default value like:
AMERICAN_AMERICA.US7ASCII
Also, you can try this:
SELECT * FROM sys.v$nls_valid_values;
Whatever you set for NLS_LANG should exist in the values
returned for this query, otherwise you'll get the error.
Unfortunately, resolving NLS_LANG issues is not always
this easy. If commenting out or changing the parameters
above still doesn't fix the problem, it is possible you need to reinstall the DB and choose the default language option. How you do this depends on the installer options
for DB version you are using.
One last point - I suggest you post your query to the
Forms & Reports forums here on OTN too. This forum is
ideally for Designer, rather than Developer questions.
Hope all this helps.
Regards,
Dominic
Designer Product Management
Oracle

D:\oracle\product\10.2.0-Console access problem-please help urgent.

Similar Messages

Maybe you are looking for