D & R only for Business Objects? Or also for transactions?

Hi,
is D&R only possible for business objects? or can I use a R/3 transaction as source / target destination? Or do I need a Business Object as a wrapper to call R/3 transactions?
regards
Ralph

Hi Ignacio,
thanks for the answer.
Why soever I can't give you points. There are no radiobuttons on the left side of your answer
So sorry
Regards Ralph
Message was edited by: Ralph Nagel

Similar Messages

Whats the business object attached to the transaction TBB1 ??

Whats the business object attached to the transaction TBB1 .
I am trying to post a loan contract fees and repayment from Treasury to GL.
Thanks ,
Naval Bhatt

Below is the exact requirement .... but there is no event generate right now ... I feel that there are some configurations need to be done ..for the event to be generated ...
It will be great if you have any idea about the configurations .. .
Objective:
When loan contract fees and repayment are posted from Treasury to GL, workflow should be activated to:
a. Insert a payment block 'Z' in the document (Will need to create a user-table to define the criteria where payment block is to be inserted), AND
b. Route the document for approval.
If amount < 10,000, only 1 level approval
If amount > 10,000, 2 levels approval required.

SAP Business Object attached to FB03 transaction

Hi,
Can any body tell me the SAP business object associated with the transaction FB03?
Also please tell me how we can find it out?
Regards,
Ratheesh BS

Hi,
BUS3006 is the BO for FB03.
IF yu want to search go to SWO1.
ClicK on Business object repository button from menu bar then select second radion button(Businnes obejcts/organization types).
Then click on ok.Then u will see all application components.from there u canserach BO for u r appliation component.
Thanks

Create a Business Object and add to transaction MASS

Hi folks, I would like to know if it's possible to create a business object for 2 tables and use this with standard transaction MASS for mass maintenance.
I want to use transaction MASS for mass maintenance on the foreign trade data, 2 table will be available eikp and eipo. I think I will have to create a business object, first it is possible and how will I setup all this,
thanks

Hi,
Check this link.
http://www.erpgenie.com/abap/bapi/example.htm
aRs

How to find business object for particular tcode at particular event

Hi,
I want to know how i can find particular business object for particular tcode for certain event?
For example suppose for tcode PA40, if i create infotype for employee and when i save it after creating it then it must be stored in certain object. How i can find business object where all data realted to emp. get saved?
Thanks & Regards,
Parag

Hi Parag,
To get the business object for given transaction,
1) Go to transaction SWELS
2) Switch on the event trace.
3) Go to the given transaction (For which you want to know the business object)
4) Execute the transaction
5) Go back to SWELS and Switch off the event trace
6) Go to transaction SWEL.. Here you will get the Business Object name (one which starts with BUS)
Hope this will help you.
Best Regards,
Deepa Kulkarni

How to Find Business Objects for any Tranaction .

Hi Abapers,
How to find Business objects for any transcation..... and how to connect the Work flow to any Trancation so that for example any body changes the date of Birth ...... so that the work flow should trigger .
Thanks & Regards
Bhaskar Rao.M

Hi Bhaskar,
For finding business object,you can try transaction SWO4 and by checking the documentation in it you can find your required business object.
Another method is:
1) Go to Trx SWE4 and switch on the event trace.
2) Run your transaction which you want to use for triggering your workflow.
3) Run transaction SWEL and find your Business Object and related event in it.
For connnecting your WF to your transaction you have to create a start event in your WF in SWDD,where in you specify the Business Object and start event which you find using above method.
Eg.You want your WF to be triggered whenever you have an error in your idoc.For this your BO will be IDOCAPPL and your event will be (inputErrorOccurred).This you will give in header data in SWDD.
Neerja

Getting error while testing "create" operation of a business object!

Hi Experts,
   I have created a composition application. This contains only one business object called Reservation.
   It has a structure containing following fields:
<UL>
   <LI> Key      -- Key field
   <LI>Reservation_No   -- Key field
   <LI>Create_Date
   <LI>Create_Time
   <LI> Status
   <LI>Source
   <LI>createdAt
   <LI>createdBy
   <LI>modifiedAt
   <LI>modifiedBy
   </UL>
   Here following fields are created by system.
<UL>
   <LI>Key
   <LI>createdAt
   <LI>createdBy
   <LI>modifiedAt
   <LI>modifiedBy
</UL>
   The system also created many operations on the business object. Some on them are mentioned below.
<UL>
<LI>create
<LI>delete
<LI>findAll
</UL>
<UL> <LI>I built and deployed the business object. When I test the service and create a new entry in the business object I got the error below:
</LI>
</UL>
<UL> <LI>
<I>Failed to save BusinessObjectNode element: User XXX has no create authorization for object ID </I>
</LI>
</UL>
<UL> <LI>
How do i resolve this?
</LI>
</UL>
Thanks
Gopal
Edited by: gopalkrishna baliga on Aug 12, 2010 1:13 PM
Edited by: gopalkrishna baliga on Aug 12, 2010 1:21 PM

Hi,
Has this issue of yours been resolved?
If yes, Kindly guide us how it was resolved, since we too are facing a similar issue.
Thanks
Rajeev Parmar

Business Object Type

I needed to associate a document with a business object type.
The transaction is ME41. I was only able to associate the document
with a business object by bringing up a document, creating a file
attachment, and then looking into table srgbtbrel and seeing that the
business object was BUS2010.
Is there an easier way to do something like this for other document types?

I think this is the best way.

Delete attachments linked with a business object

Hi All,
I have added some pdf attachments to a business object using Archivelink. I am making use of FM - ARCHIV_CREATE_TABLE.
This worked. Now we need to either add a retention period for these attachments or archive them or delete them after a certain period of time. I tried some ways till now.. but they havent worked
1. Setting a delete date in my FM ARCHIV_CREATE_TABLE :
CALL FUNCTION 'ARCHIV_CREATE_TABLE'
      EXPORTING
        ar_object                      = <archiveobj>
        DEL_DATE                       = '20100624'
        object_id                      = l_arc_doc
However when I look in OAAD, this delete date doesnt show up!
2. Using standard reports - RSBCS_REORG, RSSO_DELETE_PRIVATE and RSSODFRE. However my attachments are not even getting selected to be deleted.
3. I also tried with FM - archive_object_delete and ARCHIVOBJECT_DELETE. Here I am getting an error that states-
Error during import of physical document from cluster table SOFFCONT1.
Any ideas towards this ? All your answers are appreciated.
Thanks, Liz

All,
Minutes after I wrote up this question, I tweaked a way to delete the PDF using FM -ARCHIVOBJECT_DELETE. The archive doc id to be given here is from the 'Link' table one would have configured in transaction OAC3 (part of Archivelink config).
I would still like to know if there is a cleaner way to delete the attachments from a business object.
Also is there is way to delete the 'link' from transaction OAAD.
Your input is appreciated!
Thanks, Liz

How to use Java SDK to schedule a report in business objects

hi guys i am having a scenario , were the Java SDK will be passing the parameters dynamically to the report in business objects . the Java SDK is kicked by the file based events. this Java SDK will be on the unix server and the business object is also on the unix server. I am having the crystal reports in boe which need to be triggered by the Java SDK . such that the report is scheduled to a particular location on the unix for every week,when the java passes the parameters to the report in boe
Edited by: americansalt on Nov 4, 2010 11:30 AM

You can do this by using the BOE SDK. Here are some samples:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/806fc83f-18ba-2b10-f2b9-cbb49963fc93
Regards,
Stratos

What is the diffrence between BAPI and RFC and business object

Hi Experts,
Can anybody tel me what is the diffrence between RFC and BAPI , and also what is ther relation with business object?
Thanx in advance.
Nilesh Hiwale

Hi,
BAPI's are associated with Business Objects and also they are RFC enabled.
But RFC's are the FM's which can be called from external systems, those FM's can be used in many places based on the applications..
Check these Links
whats the difference between BAPI and RFC??
Diff. Between BAPI and RFC
Regards
Kiran

CALLING BUSINESS OBJECT FROM AN ABAP REPORT

Hi friends,
           I have a business object to which a Custom Function Module is assigned in one of its method.This Function Module calls a Bapi to update a Service Order.I need to capture the status of Idocs regarding success or failure from the function Module in the ABAP Report.I would like to know if there is any way to call this business object from my report and get the status of IDOC.
Regards,
Dev Reddy

sorry I think i was not clear in explaining .I am calling a BAPI to update 'Priority' field of service orders in a custom function module(remote enabled) and I have assigned this bapi to a custom business object. Also I have developed an ALE interface thru BDBG transaction which automatically generates custom basic idoc type,messsage type ,Ale i/b and o/b function modules.
Actually my requirement deals with a report where we have list of service orders in an internal table and pass each service order to update Priority field.
Is there any way to create an IDOC from the report and update the priority field and pass back the status of IDOC.
I have tried calling ALE O/B function function module generated thru BDBG transaction in my report but as a result i am unable to get any of the message whether idoc is created or not.
Here is my report code.
data: it_methods type table of BAPI_ALM_ORDER_METHOD with header line,
      it_header type table of BAPI_ALM_ORDER_HEADERS_I with header line,
      it_header_up type table of BAPI_ALM_ORDER_HEADERS_UP with header line,
      RECEIVERS TYPE TABLE OF BDI_LOGSYS WITH HEADER LINE.
T_METHODS-REFNUMBER = '000001'.
IT_METHODS-OBJECTTYPE = 'HEADER'.
IT_METHODS-METHOD = 'CHANGE'.
IT_METHODS-OBJECTKEY = '000004000768'.
APPEND IT_METHODS.
CLEAR IT_METHODS.
IT_METHODS-REFNUMBER = '000000'.
IT_METHODS-METHOD = 'SAVE'.
APPEND IT_METHODS.
IT_HEADER-ORDERID = '000004000768'.
IT_HEADER-PRIORITY = '2'.
APPEND IT_HEADER.
IT_HEADER_UP-ORDERID = '000004000768'.
IT_HEADER_UP-PRIORITY = 'X'.
APPEND IT_HEADER_UP.
CALL FUNCTION 'ZZ_FM_SM_ORD_PRIOR_UPDATE'
EXPORTING
   OBJ_TYPE                      = 'ZBOSMPRUPD'
   SERIAL_ID                     = '0'
TABLES
    ITMETHODS                     = IT_METHODS
    ITHEADER                      = IT_HEADER
    ITHEADERUP                    = IT_HEADER_UP
    RECEIVERS                     = RECEIVERS
COMMUNICATION_DOCUMENTS       =
APPLICATION_OBJECTS           =
EXCEPTIONS
   ERROR_CREATING_IDOCS          = 1
   OTHERS                        = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Dev Reddy

Multiple Custom Synch Plugins For Same Business Object

Can I make multiple plugins for the same business object? The main reason I'm asking is because I want to have one item plugin that runs before the core item data synchs and another item plugin that runs after.
Since the topic's here, if multiple plugins can be written, which order would two plugins run if they are both set to go off after the core synch?

That answers half of my question, although just to verify:
The only issue is the before synch plugin may not have it's data in SBO (eg new order from webtools). If the data initiated in SBO then you should be fine.
As far as I can tell, you're basically saying that if you're working with data in SBO in a plugin that's set to PluginExecutionLocation.BeforeSynch, be cautious of the fact that new data from Web Tools will not have the plugin run against it because it will arrive after the standard synch brings it over. I would assume the same would be true for the reverse, in that any new data in SBO that's not yet in Web Tools will also not have the plugins run against it for the same reason.
Also, let's say I create two SynchPlugins for Items and set both of their SynchRunTime fields to PluginExecutionLocation.AfterSynch - which one runs first? Or is it indeterminable each time?

Need Ideas for creating and using Custom Business Object

Hello Guys,
I am developing an application which uses a Request->Approve->Create approach for creating Purchase documents.
Now I am a little puzzled about how to make use of the Business Object BUS2014.
The application I am developing has its own unique 'Request Number' (say REQID) which will point to the Request for Creation of a purchase order.
Whenever a Request is created (from a Z-Tcode) a workflow needs to be initiated and it has to be sent to the approver.
The Purchase Document will be created once the approver approves.
Now my confusion here is, if I use BUS2014, the object will be instantiated only during the final step of the workflow. But I need an instance during the beginning of the Requestor ->Approver negotiations as I am playing with events. These events needs an Object_key.
How should I proceed here?
Should I create a new logical Business Object like ZPOREQ where I have the above mentioned REQID as the key?
And should I have an attribute of type BUS2014 inside the custom BO?
How will I make use of the methods like BUS2014.Create etc which I may need to create the purchase document?
Any small direction will be a huge help for me to get used to this wilderness.

Hi,
You should continue with the ABAP class idea. The business objects are kind of "obsolete" already, and if there is a need to create a new "object", ABAP classes are the way to go. Business objects are still useful, but I normally use them only when an existing standard business object fulfills the requirements (possibly with slight additions) which is almost never.
From my point of view you can use the existing class. Depending on the circumstances I normally have just one class that I use for both workflow and the possible other functionality that is required, but you have to understand that I have this goal in my mind already when starting the development process. As your class most probably has many useful features already (such as you have the header and item data as attributes etc. (if I understood correctly?), these are also useful in in workflow (class attributes will be available in WF container etc.).
If you are hesitant to use the same class directly in your workflow, you could also create a new class ZCL_REQUEST_FOR_WF (with the workflow interface), and then simply add your existing class ZCL_WF_REQUEST as an attribute to this new class. Then this new workflow class could include the pure workflow stuff, and your existing class the non-workflow stuff. But this most probably will not make much sense - just implement the if_workflow interface in your existing class (this is just one possibility that you might consider.)
Regards,
Karri

EWA for Business Objects (XI 3.1) within SAP Solution Manager

Hello!
We use Business Objects (XI 3.1) and would like to get weekly a EWA report within our SAP Solution Manager.
Our SAP Solution Manger has only ABAP stack and it has the SPS version 25.
We also do not use Wily Introscope/Diagnostics and E2E tools within SAP Solution Manager.
Question
Is it possible to set up EWA for Business Objects with our requirements (SOLMAN with ABAP stack and without E2E/Diagnostics tools)?

Hello,
The short answer is no. You can verify this in SAP Note 1507629 - Preparing a BOE system for Service Sessions in Sol. Manager.
"...1.) Managed System Setup
Perform the Managed System Setup for SAP BusinessObjects Enterprise as
described in the "End-to-End Root Cause Analysis System Landscape Setup
Guide". This guide can be found in the SAP Service Market Place:
-> http://service.sap.com/diagnostics
-> Navigate to the "Media Library"
-> Open the document "SAP Solution Manager Landscape Setup Guide"
Please ensure that you perform all steps mentioned in the guide which
are relevant for your product and version. Please read also SAP note
1357901, which is also referred to in the above mentioned setup guide."
So this is a requirement. There are also pdf documetns attached to this note that describe how to setup the EWA in Solution Manager. EGI_SBOP_EWA_part1.pdf and EGI_SBOP_EWA_part2.pdf.
The fact you have no Java stack and have not installed Diagnostics, just means it has not been done. It can be done and then you can do a managed system setup, and the balance of tasks required to prepare the system and Solution manager to generate EWA reports for the BOE system. Its just more work, not a show stopper.
Regards,
Paul

D & R only for Business Objects? Or also for transactions?

Similar Messages

Maybe you are looking for