D10 freezes with NVS290 and 2 x Matrox T30 PCI graphic card

Hi,
I have a problem with D10 that have NVS290 as a standard graphic card and then 2 x Matrox T30 PCI graphic.
I have updated to the most recent BIOS and still my system freezes. It has been testes on Dell and HP workstation and it;s working well.
Can you please help me to find out possible root cause
Thanks

if i'm understanding this correctly, you have an NVS 290 in a PCI-e x16 slot and two matrox T30s in the PCI slots.   i highly doubt this configuration is supported as the D10 doesn't like to have different models graphics cards installed.
when exactly does the D10 freeze?   will it boot past POST?   does is freeze in the OS?   if so, what OS are you using?
have you tried it with just the two matrox cards installed and not the quadro?   if so, what was the result?
if it doesn't work with the two PCI cards installed without the NVS 290 then you'll either have to source a second NVS 290 to drive your displays or one or two NVS 440 or 450 cards to handle everything.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

N650-1GD5/OCV1 freeze with artifacts and crash

Good morning everyone
First of all, I will start to present the configuration of my computer
PSU: Sirtec High Power 500W Bronze, PFC Active
MB: MSI 970A-G43 (bought 2 weeks ago)
CPU: AMD Athlon II X2 240 (2.8 GHz) - Running stock with AMD Cooler since i bought it, around 35-43 C operating
temperature
RAM: KingMax 4GB DDR3 1333 MHz (1 x 4GB Module)
VGA: N650-1GD5/OCV1 (MSI GeForce GTX 650, running with stock cooler and stock frequency, i have never oc on it)
HDD1: WD 640GB Caviar Black Edition, SATA2 32MB Cache
HDD2: WD 500 GB Caviar Blue, SATA2, 16MB Cache
DVD Writer 1: LG GH22NS50
DVD Writer 2: Optiarc AD-7280S
Card Reader 3.5"
I'm an very very casual gamer, i play games once or twice a week; in the last period i didn't played games for one month; i've used my pc for mail, office, watching movies, messenger, facebook, web browsing, hdd data recovery, programming php. Before upgrading to 970A-G43, i had the same configuration - except MB and RAM (i used for 4 years K9A2GM V3 with 4GB (2x2GB) DDR2 800 KingMax and the actually N650-1GD5/OCV1; played games with no problems).
After the upgrade, i installed OS Windows XP SP3 with clean install, AHCI Mode, latest drivers - no problems 'till there. I have installed latest version of DirectX 9.0c and some games: Deus Ex: Human Revolution, Euro Truck Simulator 2, Sonic and All-Stars Racing Transformed. All with same problem: pc freezes with artifacts and then freeze - sometimes after 3-4 minutes of playing, othertimes after 10-15 minutes.
I've checked the RAM with MemTest86 for one night, no errors. I've checked the CPU and GPU Temperature, all stable (CPU around 40, GPU around 70 under full load). I've stressed up the system with Prime95 and Furmark latest version running at the same time - all stable (Tested for 30 minutes, CPU around 43 C, GPU around 85 C - no freeze, no crash).I installed 3D Mark 06, i ran it and it freezes in-time of first test or after it.
VGA driver was 320.49 WHQL initially, downloaded from nvidia website. I uninstalled it, cleaned my OS with Driver Sweeper, installed latest version from MSI Website (MSI Graphics Driver 306.81 ). Both drivers, same problems.
I'm pretty sure that there is no problem with PSU or MB's VRM (VRM supports 125W TDP, CPU is running 65W. My old boad K9A2GM V3 has only 65W and there were no problem). If there were problems, the system would crash in prime 95 and furmark running at the same time, i think.
I didn't tested yet my VGA on other PC, neither another VGA in my PC.
Any suggestion would be appreciated.
P.S.: In BIOS, all is set on AUTO - except DDR Speed - Manually set to 1333 MHZ with auto timings.
C1E Enabled, Cool and Quiet Activated, EUP 2013 Enabled.
I have flashed MB to latest BIOS, v10.3; same problem
Any suggestion is appreciated.
Thanks in advance,
Best regards!
Daniel Ciuperca
Constanta City, ROMANIA.

VGA Card is dead. Probably at least one memory chip died or has errors on it. Testet on another PC and results are same, in 3D Mark and Crysis 3 too.
I sent the card to warranty services.
Problem is solved.
Thanks a lot to all of you who read my post.
Best regards,
Daniel Ciuperca
Constanta, ROMANIA

This is my experience with MSI, and their NVIDIA GTX 570 reference card.

Hello my name is James king.
and This is my experience with MSI, and their NVIDIA GTX 570 reference card.
(5/27/12) Day one. I update my driver from Beta 301.24 To WHQL 301.42. and as you would expect, it worked. so i restart and go play kerbal space program (if you haven't played this go, play it now i love it) 5 minutes later it starts artifacting, eg. textures stretching, random green spots. "ugh" so i start troubleshooting, reinstall revert and so on. later i give up and go play Portal 2, i load the game opening screen i see lots (100-250) of little flickering green dots. first instincts says its the cable, test nope. then maybe the screen, test nope. i keep testing throughout the night, to no avail.
(5/28/12) so to the internet, for help. 3 hours later nothing, but people with bad cards. at opening i call NVIDIA Tech Support, they say to call MSI so i do. 3 calls no pick up, 4th call and i get a "Support technician" who is no help, says to fill out a RMA form online. and so i do more troubleshooting for the rest of the day. and i give up, and go to bed.
(5/29/12) i fill out a RMA form, end of day i get an email from MSI that says; "Dear Valued Customer [email] your RMA is pending approval, and you will get an email within 1 weak with shipping information.
(6/1/12) shipping information, instructions, but no shipping label.
(6/4/12) i ship the card, via UPS
(6/12/12) after using the most round about route eg. it got to MSI.
United States 06/04/2012 6:40 P.M. Order Processed: Ready for UPS
[my city], MS, United States 06/04/2012 9:10 P.M. Departure Scan
Jackson, MS, United States 06/05/2012 12:15 A.M. Arrival Scan
Maumee, OH, United States 06/07/2012 3:40 A.M. Departure Scan
Hodgkins, IN, United States 06/07/2012 7:00 A.M. Departure Scan
Hodgkins, IL, United States 06/07/2012 2:42 P.M. Departure Scan
Vernon, CA, United States 06/11/2012 10:30 P.M. Departure Scan
Baldwin Park, CA, United States 06/11/2012 11:05 P.M. Arrival Scan
Baldwin Park, CA, United States 06/12/2012 9:42 A.M. Delivered
(6/13/12) email from MSI, says they got it.
(6/14/12) email from MSI, says it is in procesing.
(6/20/12) email from MSI, saying they shipped it and that [this] is the tracking number.
(6/26/12) end of day. i receive the card, and see the case is badly scratched. i install it in my pc and hey it worked (for now). watch some YouTube, and go to play skyrim. start up load my save and i make one step, and my pc hard freezes. "sigh" half an hour later, i give up and go play minecraft 10 minutes in, and it hard freezes. so now more troubleshooting,5 hours later no luck.
(6/27/12) i have called MSI Tech Support 2 times, when they picked up the phone they say to call customer service. 7 calls later no pickup.
and that is it MSI have sent my on the run around too long.

So are you asking us for help with your PC issues or simply complaining to us about your RMA which we on this forum have nothing to do with. We are MSI product users here the same as you and we are helping each other out with problems on their PCs with their MSI parts. If you need what help we can offer assisting you with a problem then start a new topic and we'll do the best we can to help you.

HT2731 there is no option in my ipod for credit card as none. so what shoud i do am stuck with it.and i dont have any credit card so from where am i going to fill that option?

there is no option in my ipod for credit card as none. so what shoud i do am stuck with it.and i dont have any credit card so from where am i going to fill that option?

There are instructions on this page for how to create an account without giving a credit card number (i.e. select a free app and create an account) : http://support.apple.com/kb/HT2534

Calling all Matrox Millenium G550 graphics cards...

Calling all Matrox Millenium G550 graphics cards...
Has ANYONE got the Cover Flow view working with this card?
If you have you have what did you do (if anything)?
I've already tried:-
* the latest Matrox drivers
* the latest DirectX
* ensuring that Hardware Acceleration is at Full
* uninstall & re-install iTunes
* install latest Quicktime before re-installing iTunes
P4 2GHz, 1GB RAM Windows XP Pro SP2; Matrox G550; Dual screen

At home, I have a Matrox Parhelia and the cover flow mode works great. I have a G550 in my work computer but I don't have any music local on the hard drive. I use my iPod Photo as axteranal HD to play via iTunes. So, cover art doesn't show up.
However, I have brought to work some hummingbird videos that took last week and added them to the Movie section in Itunes on my Work PC. So, I tried cover flow in the movie mode. It looks awful! Each picture is made up of little pictures in a 18x9 mosaic. I can even see though the gaps where there are grid lines. I don't see this at home with the Parhelia.
I have the latest everything installed as well. I'm running WinXP SP2. Have you found a solution?
Thanks,
Steven

Apple Cinema Display 23-inch with PCI graphics card on a PC...?

My wife has a Dell Dimension 2400 PC along with a Mac G4. The Mac will obviously drive the 23-inch display with no problem, but the PC has on-board graphics which are awful. The only improvement is via a PCI graphics card, and a KVM switch (using the DVI interface on both Mac and PC). Does anyone know of an inexpensive PCI graphics card which will cope with the 23-inch display? Gaming is not on the list of priorities, but page layouts for posters and small (8-page) brochures is what it's needed for.
The Dell's operating suystem is XP Professional, and the G4's is Tiger. Thanks for any help.
Chris

I got the blue&white G3 w SDRAM/6GB.
do you think http://www.amazon.com/gp/product/B00DC1P8VA/ref=ox_sc_act_title_1?ie=UTF8&psc=1& smid=A1EF9OE38VX40W
will solve this? I believe I need a DVI-D female to VGA male adapter?
That adapter is for connecting a VGA display to a computer's DVI port.
If your computer has the ATI Rage 128 graphics card it will have one DVI port and one VGA port. It won't run both ports simultaneously.
If the display has a DVI plug, plug it into the computer's DVI port. No special cable or adapter is needed, but the computer may not support the resolution of the 23".
If the display uses ADC (Apple Display Connector)
<http://upload.wikimedia.org/wikipedia/commons/thumb/0/09/AppleDisplayConnector.j pg/220px-AppleDisplayConnector.jpg>
you will also need a DVI to ADC adapter
<http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2>

Hello !, can i install Mac OSX Lion to my PC (not mac) i have got Intel Core2 Quad processor and Gigabyte P35-DS3 and 3GB RAM and ATI Radeon HD4850 Sapphire graphics Card ?

Hello Guys
i want to install MacOSX to my pc
i heard something about that (like OSX86 project ?)
i have got Intel Core2 Quad processor and Gigabyte P35-DS3 and 3GB RAM and ATI Radeon HD4850 Sapphire graphics Card ?
please answer .......

Teknus... Here's the issue. For starters, I understand software licensing issues may not be interpreted the same in all countries (although they are still applicable). I also understand that everyone is not familiar with what software licensing is. It is technically possible to install OS X on a PC (as you have seen on your friends computer). However, Apple has designed OS X to only work on Macs. In order to get OS X to work on a PC, it must be modified ("hacked"). As these forums are owned by Apple, we are not permitted to provide you with instructions on how to hack their OS.
Having said that, I have used OS X on PCs. It is not a pleasant experience at all. The experience is actually poor enough on a PC that I would not even use it... opting for Windows or Linux instead. You're simply sacrificing too much of the true OS X experience when you try to run it on standard PC hardware. If you want to try a different operating system, give Linux a try. There are many free versions out there and they will run on just about any PC. The forums are also very helpful. Linux is much more similar to OS X than Windows.
I understand that Macs are expensive and that you would like to use OS X on a PC. The simple fact is that using it on a PC would not be the same as using it on a Mac.

My MBP keeps freezing with red and black vertical lines. What's going on?

About once a week my early 2011 i7 macbook pro seems to freeze with these weird lines on screen. I was using Adobe Photoshop CS6 and had quicktime playing an mp3 in the background. Nothing out of the ordinary happened that I know of that could have triggered the computer locking up.
I took my MBP to the Apple store and they said it passed all diagnostic tests. They suggested that since it is sporatically happening, it may be weeks before an answer is given to the problem that I am experiencing. Here are some pictures I took when my mac last froze.

Were you ever able to resolve this? My friend's early 2011 MacBook Pro with your same specs except with 10.6.8 just did the same thing while Google Earth 7.1.2.2019 was running. Never any other issues, just happened out of the blue.

I Phone Freezes with Mailbox and CD Logo-Help Please

My Iphone freezes with a Mailbox logo with an arrow pointing to an I-tunes CD logo. It will not allow me to re-set. It does allow me to turn on and off, but this same mailbox logo with an arrow pointing upward to the i-tunes logo is constant. I have tried resetting completely, but nothing.
any help would be appreciated.
Also, this occurs about once per week, but usually resolves with a re-charge. However, this is NOT the problem. Thanks again.

Thank you for using the Apple Support Communities
It sounds like your iPad is in recovery mode after an error in the update process that may have occurred. The solution to this would be to plug it into a computer running the latest version of iTunes and press the restore button. This will ease the iPad and reinstall iOS. Hopefully you setup an iCloud or iTunes backup for the device.

Has somebody worked with Color and The matrox mxo ???

So,
i have digital postproduction in hamburg germany.
We have two 5D Cyborg Online Systems, 3d Workstations with xsi,
and an Mediacomposer.
So last Year we started to do onlinening on Set for digital shooted
highspeed tv commercials (With the Weinberger Sppedcam).
We do this with on of our mobile 5D Cyborgs Systems.
Which i think, is one of the best Online systems still on the Highend market.
But Colorcorrection is more and more Important specially with digital shooted footage.
So the ColorCorrection tools in the Cyborg a pretty nice.
But I wanted a portable Colorcorrection Tool/system for deficile Corrections.
So i heard about Silicon Color.
So now I´ve bouht FCS 2, and i already had a AJA Io La Box.
Color don´t give me a Videoout over this to my Sony Class A.
So how ist the Quality from the MXO on a Apple Cinema , like a Sony BVM Class A ? is it a reference Picture ?
Second Question
How is the Workflow, because with a mac book pro, a calldigit raid and color, you need a secondary displa for the scopes and the workpicture ( masking etc).
Is the Presenationmodus from the MXO in the same Quality of the Mastering Mode.
And is it ease and fast to switch between them.
Thanks to all
mario
Hamburg

check out this thread on a nother forum:
http://forums.creativecow.net/cgi-bin/newreadthread.cgi?forumid=223&postid=1519&univpostid=1519

Matrox M series graphics cards

I am thinking about buying an M9125 card from the new range of Matrox M series cards. The details are here:
http://www.matrox.com/graphics/en/products/graphics_cards/m_series/m9125pciex16/
I have tried without success to find a review of this series and of the card I am interested in particular. Nor can I find any mention of it or its performance in a user forum anywhere. My display is a NEC2690 (26") running at a resolution of 1920x1200. I don't game and just want a new card for PS and Corel Painter work. I have CS3 and will probably move to CS4 idc. I also want a card that is passively cooled.
I'd be grateful if someone here would please look at this card and advise me whether this is a reasonable choice for Photoshop etc. It is expensive for what it is - especially as I don't run multi-displays - but allowing for all that, will CS3 etc be happy with it, please?
Thanks
David

Daniel
I bought an M9125. IQ is fine as expected and it works happily with CS3 and with my 26" NEC2690 display. I had some trouble loading a calibrated (Eye-One Display 2) profile after installing the Matrox driver, but eventually sorted it out. The software is rudimentary after Nvidia (eg you cannot get temp read outs) but functional. Would I recommend it? - IQ is ok but it's expensive for what you get and given the basic accompanying software. But overall - no complaints and Matrox tech support were helpful.

Funky Colors and Patterns Across Screan (Bad Graphics Card?)

Specs:
2010 Macbook Pro 15" with bootcamp (now uninstalled after reset to factory defaults)
OS X Maverick
4gig ram
500gig hard drive
2.4ghz Intel core i5
The above image shows the problem I am having. It freezes the computer as well. It has been happening for 2 years give or take (was given the computer in 2010 by my school with apple care extending 6 months after graduation which has since expired). At first it was happening only when it got really hot (located at the very top of the keyboard where it meets the screen) while playing video games and not often so I just dealt with it for a while by downloading fan controls so I could keep the fans running at maximum. Now however, it happens whether the computer is hot or not (sometimes right when I turn it on or sometimes after 10 to 15 minutes of use) so I dont think it is a heat issue, I think heat just enables an underlying problem. I had bootcamp on there and while in windows the same thing would happen but the screen would occasionally go black and it would recover with a notification from NVidia telling me that the graphics card has crashed and recovered. What I have tried so far (mostly to make sure its not a software issue).
Removing the bottom and cleaning out dust that may clog the fans for better cooling.
Scanning for antiviruses (just to make sure).
Running any mac or windows software cleaners by using Onyx or AVG's system repairs.
Resetting the computer to factory defaults (OSX Maverick) after removing bootamp and erasing the hard drive.
None of this has worked (although keeping the computer cool used to work)
I'm on here because I am wondering what hardware might be faulty and if there is a cheaper way to fix this that does not involve spending a great deal of money having apple fix it for me. Seeing as it is coming up on its 5th year, I am not looking to put too much money into it (no more than 150$). I am just looking to keep it running as long as possible, I cannot afford a new laptop right now. Not a problem if it involves taking it apart and attempting to replace parts if they can be found at a low cost.
Thanks!

SCREEN******

PCIe Graphics Card with Magma T/Bolt Expansion box

Does anyone here have a good or bad experience with the Radeon 5770 or 5870 cards used in a Magma Thunderbolt expansion box in conunction with a MacMini?
I'm looking to purchase a graphics card to go into my Magma box, but not sure which card will be supported in this configuration.
Thanks,
NE

I have seen a couple people were unable to boot OS X if they had an Nvidia 8800 installed. You'll need something that OS X can see IF you want to see early bootup messages (such as Vista startup options).
Can't say I've seen a message with "Marox" mentioned. So only way to know for certain is old trial and error.
There are newer graphics cards coming out. There is the Radeon X1900 (which is over-due for an update), and the Nvidia 8600 GTS series works in Vista and at least doesn't block OS X from working, but is only a step above X1900.
Apple sells a $1600 Nvidia for 3D. And as you can see, graphics options is a "weak spot."

I am willing to buy a i mac 21" ,i will use it to edit photos using photoshop cs6 and lightroom 4 is the graphic card 512mb will be enough for my work ? wich one ishould go for thanks

i am willing to buy a i mac 21" , i will use itfor photo editing using photoshop cs6 and adobe lightroom 4 , is the graphic card will be enough ? any recomandation , wich i mac should i buy ,thanks for your help.

Mercury Graphics Engine
The Mercury Graphics Engine (MGE) represents features that use video card processor, or GPU, acceleration. In Photoshop CS6, this new engine delivers near-instant results when editing with key tools such as Liquify, Warp, Lighting Effects, and the Oil Paint filter. The new MGE delivers unprecedented responsiveness for a fluid feel as you work.
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html

MBP Screen goes black and then restores. NVIDIA graphics card issue?

I've got a mid-2007 MBP, 2.4 GHz, 4 GB RAM, running 10.6.2.
Over the past couple of days I am having random losses of video screen. I will be on a webpage, doing nothing with it, and the screen will go momentarily black. It normally lasts for a few seconds, then restores. Nothing I do seems to affect the blacking out or the restoration.
I have the NVIDIA GeForce 8600M GT graphics card.
Any suggestions / input on whether I am experiencing the failure? FWIW, computer is still under Applecare.
Thanks

See this KB article:
http://support.apple.com/kb/TS2377
I have similar issues with my MBP. However there is also a widespread issue on the forums in which the trackpad and keyboard stops responding, and it may be difficult to tell if the problem is loss of video or loss of input ability when the display goes to sleep automatically. I'm currently in this boat. I'm not quite sure if I have a video problem of if this is the issue with the trackpad/keyboard connection.
The video card issue appears that apple will pay for out of warranty but they are not addressing the widespread problem with trackpad and keyboard loss of function and if you are out of warranty you are out of luck.
Message was edited by: Bryan Brindeiro

D10 freezes with NVS290 and 2 x Matrox T30 PCI graphic card

Similar Messages

Maybe you are looking for