D1000 issues - array controller or host adapter?

Hi All
I have a 280R with a PCI/SCSI card installed. there are 2 scsi paths from the card to a D1000 controller. Recently I have lost 6 of the 12 D1000 disks - I have been told it is the D1000 controller that is faulty. My question is how would I know if it was the controller on the D1000 or the host adapter on the 280R? How can you diagnose the problem?
Cheers guys
B

Well, if the 6 drives lost all shared the same controller number, or are all in the same "side" by scsi id of the D1000 then that is a sign it is isolated.
As a test, you could shutdown the 280R, set auto-boot? to false, reset-all, then do a probe-scsi-all. See if you get 12 drives, six in each contoller. If one side has 6 and the other none, you could swap cables and reset again, see if the problem stays with the hba or stays in one side of the array. That would confirm where the problem is.

Similar Messages

SATA Host adapter issue

Hey guys, I Believe that I have found an issue with the SATA host adapter in a Pavilion p6210y desktop. I have having trouble restoring the system after a hard drive replacement and I discovered that if I have BOTH the hard drive and the CD-ROM drive unplugged then the machine will boot. If I plug in either the hard drive OR the CD-ROM then the machine will hang on the HP BIOS screen. Voltage output of the PSU is normal. I'm thinking the host adapter (motherboard) is toast.

If you already haven't tried, reset the BIOS to 'Default Values'.Or if that doesn't work, try clearing the BIOS entirely by using the Clear CMOS jumpers on the motherboard or removing all power and the CMOS battery for several minutes. Also, you don't need a CD/DVD drive to run a system diagnostics.If you don't have the most recent version of HP Vision Diagnostics, download the most recent version onto a CD or flash drive using the steps in the Creating HP Vision Diagnostic Media section.* HP Vision Diagnostics is supported by systems manufactured between Sept 2010 > June 2012. You can also try BIOS diagnostics.If the computer does not boot, and you do not have a Vision Diagnostics CD available, use the BIOS diagnostic tests. The HP Vision Diagnostics tests are built into the BIOS of your computer and are a quick and easy way to identify basic computer hardware problems. HP 3 in 1 Diagnostics USB KeyThe HP PC Hardware Diagnostics 3-in-1 USB Key includes the latest UEFI based diagnostics as well as the older HP Vision Diagnostics. In addition to diagnostics, it now supports the recovery of a corrupted BIOS on supported systems. Download (3-in-1 USB Key v.3.1.0.0) If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

S20-30 SD host adapter driver - Windws 8.1 reinstall issues

Dear All
I had to reinstall windows 8.1 on my S20-30 following a harddisk failure. I downloaded and installed all the drivers from lenovo support but
1) The Intel SD host adapter shows error with status disabled.
2) The Lenvo support software complaints that it n longer can detect warrenty information.
Any pointers is highly appreciated
Thanks and Regards
Sibi.

Dear All
I tried reinstalling using the drivers at http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-s-series-laptops/lenovo-s20-30-... but tat did not wrk either. Please see the error shown by Device manger
Thanks and Regards
Sibi

G-tech espeed SATA PCIe Host Adapter safe to install with SL?

I have heard that there is an issue with esata express cards.
Is the PCIe Host Adapter safe to install to a Mac pro running SnowL?

I spec Burly arrays from MacGurus for my clients.
They are built like tanks, have two fans, and tech support, as well as customer support, is great.
http://www.macgurus.com/productpages/sata/BurlyPortMultiEncl.php
I buy them without drives, then add Seagate 7200.11 drives. The jury's still out on their 720.12 series. The 7200.11 series had a firmware issue months ago that has been resolved.

Is anyone using the Illustrator CC host adapter on Mac?

I'm not able to successfully use the Host Adapater for Illustrator CC on Mac OS. It's working on Windows and on earlier versions of Illustrator. I'm using Illustrator CC 17.1.0 and Mac OS 10.9.1.
Is anyone else successfully using the Illustrator CC host adapter plugin on Mac OS? If so, where did you get the host adapter plug-in from, and did you have to do any special "tricks" to install it?
I created a new Extension project in Extenion Builder (licensed copy of EB 2.1), selecting the options to use the Illustrator host adapter libraries. My extension just has a button that calls the AIEventAdapter.pingPlugIn() function and a list box to show the results (i.e., "pingSucceeded" or "pingTimedOut"). I then used Extension Builder to Export the project as a ZXP and sign it (with a self-generated certificate). I then installed the test Extension with Extension Manager on my Mac. All of this completes without any errors, and the AIHostAdapater.aip is in the correct Illustrator Extensions folder. But when I run the Extension the pingPlugIn() function always returns with the "pingTimedOut" event. The same Extension correctly results in the "pingSucceeded" event on Illustrator CC on Windows or for earlier versions of Illustrator on both Windows and Mac OS.
Is there a known problem with the Mac OS version of the Illustrator CC host adapter plug-in? Or an updated version somewhere?
Thanks.

For someone facing loading issues of AIHostAdapter plugin in CC2014, you can download the same from the following URL
https://github.com/timothybrandspencer/CEP-Resources/tree/master/host_adapters/illustrator
Thanks,
Manan

Introscope host adapter

Hi
I am using solution manager 7.1 sp10
While configuring our new server in managed system configuring on step 7 configure automatically I get error at introscope host adater as below:
CX_AI_SYSTEM_FAULT : SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_TIMEOUT")
CX_SOAP_FAILURE : Error when processing Web service call
CX_SOAP_CORE : Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_TIMEOUT")
I checked parameter icm/server_port_0 it has correct value PROT=HTTP,PORT=80$$,TIMEOUT=300,PROCTIMEOUT=600
Then I check other servers which were connected successfully now they all are showing error at this step
Anyone has any idea how to solve this issue and why this issue is started?

Hi,
Check the below notes,
1962821 - Introscope Host Adapter setup activity fails because of a timeout
Rg,
Karthik

Scripted Host Adapter and calling Scripts

I have a Scripted Host Adapter that I created in the admin console under resources. I have attached 6 scripts to the adapter to do different functions on the mainframe. We aren't going to use this adapter as an adapter per say. We want to just be able to call the scripts from a workflow to do the intended actions that we need done on the mainframe. How do I go about calling various scripts from a workflow? Does anyone know exactly how I would go about doing this? Not sure how much anyone uses Scripted Host Adapter.

Hi i need to call the action script from the workflow .and modify the account in top-secret,
i used the fallowing code for this but nothing is found...
can u plz help me on this issue..
i am using the fallowing code

<TaskDefinition id='#ID#8FD20508FFD1CFF7:5DA25165:1122E531698:-7FFC' name='Modify TopSecret Account' creator='Configurator' createDate='1177601623578' lastModifier='Configurator' lastModDate='1178229418812' lastMod='494' taskType='Workflow' executor='com.waveset.workflow.WorkflowExecutor' suspendable='true' syncControlAllowed='true' execMode='sync' execLimit='0' resultLimit='0' resultOption='delete' visibility='runschedule' progressInterval='0'>
<Extension>
<WFProcess name='Modify TopSecret Account' maxSteps='0'>
<Variable name='modifyObject' input='true'/>
<Variable name='accountId' input='true'/>
<Variable name='tempPassword' input='true'/>
<Variable name='modifyview'/>
<Variable name='view'/>
<Variable name='TSResource' value='TopSecret'/>
<Activity id='0' name='start'>
<Transition to='Modify Accounts'/>
<WorkflowEditor x='127' y='49'/>
</Activity>
<Activity id='1' name='Modify Accounts'>
<Action id='0' name='Checkout View' application='com.waveset.session.WorkflowServices' hidden='true'>
<Argument name='op' value='checkoutView'/>
<Argument name='type' value='User'/>
<Argument name='id' value='$(accountId)'/>
<Return from='view' to='user'/>
</Action>
<Action id='1' name='get Resource Object' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='getObject'/>
<Argument name='type' value='Resource'/>
<Argument name='name' value='ScriptedHost'/>
<Return from='object' to='resourceObject'/>
</Action>
<Action id='2' name='get Resource Action' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='getObject'/>
<Argument name='type' value='ResourceAction'/>
<Argument name='name' value='Example Login Action'/>
<Return from='object' to='resourceAction'/>
</Action>
<Action id='3'>
<expression>
<block>
<set name='ScriptedHostResource'>
<new class='com.waveset.adapter.ScriptedHostResourceAdapter'>
<ref>resourceObject</ref>
<invoke name='getCache'>
<invoke name='getLighthouseContext'>
<ref>WF_CONTEXT</ref>
</invoke>
</invoke>
</new>
</set>
<set name='actionResult'>
<invoke name='TS Update User Action'>
<ref>ScriptedHostResource</ref>
<ref>resourceAction</ref>
<map>
<block trace='true'>
<append name='TSuser.waveset.resources'>
<s>TopSecret</s>
</append>
<set name='user.accounts[TopSecret].accountId'>
<ref>modifyObject.accountId</ref>
</set>
<set name='user.accounts[TopSecret].fullname'>
<ref>modifyObject.fullname</ref>
</set>
<set name='user.accounts[TopSecret].job'>
<ref>modifyObject.job</ref>
</set>
<set name='user.accounts[TopSecret].TSO Access'>
<ref>modifyObject.TSO_Access</ref>
</set>
<set name='user.accounts[TopSecret].Department'>
<ref>modifyObject.department</ref>
</set>
</block>
</map>
</invoke>
</set>
</block>
</expression>
</Action>
<Action id='4' name='Checkin User View' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkinView'/>
<Argument name='view' value='$(user)'/>
</Action>
<Transition to='end'/>
<WorkflowEditor x='219' y='178'/>
</Activity>
<Activity id='2' name='end'>
<WorkflowEditor x='454' y='181'/>
</Activity>
</WFProcess>
</Extension>
<MemberObjectGroups>
<ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
<Properties>
<Property name='editorOriginalName' value='Ameren Modify TopSecret Account'/>
</Properties>
</TaskDefinition>
plz do correct if needed .........
thanks in adavce..
--jem

Problem setting up OCSP in LAB "Bad signing certificate on Array Controller" Signing Certifcate: not found

Hello
Can someone please help me with the following question.
In my LAB I have setup the following (MSDB subscription)
Windows 2003 R2 Active Directory (Forest and Domain at "Windows Server 2003" level)
2012 R2 offline Root CA (published the ROOT CA certificate to member server "LocalMachine/Trusted Root Certification Authorities" store via GPO as could not recall the certutil command to publish to directory services)
2012 R2 online enterprise issuing CA (works fine)
Setup OCSP on a separate server following a number of article
Templates To Issue > OCSP Response Singing
Gave the OCPS Server "Read", "Enrol" (some confusion in various articles about also assigning Auto Enrol permission but I did not)
Gave Network Service account same permissions as above
Configured AIA extension on issuing CA for http://OCSPServer1/ocsp
opened the OCSP MMC and configured Revocation Configuration called MyConfig, choose the issuing CA cert by browsing AD The wizard picked up the CA and the Template no problem and the wizard automatically selected the check box to Auto Enrol
etc..
However I get the following message at the end of the wizard "Bad singing certificate on array controller" and under array controller section certificate status says "Signing Certificate: Not Found"
Check MMC > Certificates > Services > OCSPSvc\_MyConfig_ no certificate present
At issuing CA > Certificate Authority > Issued Certificates no OCSP signing certificate issued.
Do I need to public the ROOT CA Cert to AD too rather than pushing to LocalMachine\Trusted Root Certification Authorities via GPO?
I have also tried giving the OCSP Server and Network Service 'Auto Enrol" rights on the template but no difference.
What I would like to also know please is, what triggers the "enrolment" for the OCSP cert, is this when you complete the OCSP Revocation Configuration wizard? and does the OCSPSvc then re-enrol for another cert in two weeks, even without auto enrol
configuration on the template?
Thanks very much in advance
AAnotherUser__
AAnotherUser__

OK A little more information (should have thought about checking the Windows event logs first)
One the OCSP Server, when completing the "Revocation Configuration" Wizard I get two Error events in the Windows Application Log as follows
Event ID 34
The Online Responder Service encountered an error while submitting the enrollment request for configuration Config9 to certification authority SubCA01.LAB.local\LAB-SUBCA01-CA. The request ID is -1.(The permissions on this certification authority do not allow
the current user to enroll for certificates. 0x80094011 (-2146877423 CERTSRV_E_ENROLL_DENIED))
Followed by Event ID 23
The Online Responder Service could not locate a signing certificate for configuration Config9.(Cannot find the original signer. 0x8009100e (-2146889714 CRYPT_E_SIGNER_NOT_FOUND))
So much clearer as to where the issue lies, will do some further digging
Thanks
AAnotherUser__
AAnotherUser__

New Host Adapter plugin for Illustrator CC 2014?

I'm seeing that the Host Adapter plugin for Illustrator CC does not work for Illustrator CC 2014. I've checked that the AIHostAdapater.aip file is installed in the correct AI CC 2014 folder. But calling AIEventAdapater.getInstance().pingPlugIn() always results in "pingTimedOut".
Is there a new AIHostAdapater plugin forthcoming for Illustrator CC 2014? Or is it available somewhere to download? It is not available as an update through Extension Builder.

Hi Brian,
You can download the CC2014 host adapter plugins for Illustrator from the following URL
https://github.com/timothybrandspencer/CEP-Resources/tree/master/host_adapters/illustrator
Worked for me(verified of 64 bit installation of Illustrator on WIN and MAC), hope it works for you as well
Thanks,
Manan

How to find out the memory status of RT PXI controller from host?

I want to find/read the memory status of the RT controller from host programmatically. Can any one have any idea about it? If yes can please share your valuable suggestion.
Regards
Vijay

Hello Vijay,
Check out the attached example, it monitors the CPU usage as well as the memory usage. You will need to install our STM component that you can download here:
http://zone.ni.com/devzone/cda/epd/p/id/2739
Message Edited by Jimmie A. on 06-12-2008 03:08 AM
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal
Attachments:
CPU and Memory Tracker1.zip ‏150 KB

How can i change the label of an array controller in the xib file

I have seven instances of NSArrayController in my main xib file; they are all labled 'Array Controller' and I cannot change the label in the list of objects. I can change the label in the identity inspector, but the label still remains 'Array Controller' in the list of objects. If I double-click on the label that is in the list and change the label its value changes in the identity inspector when I tab out of the label field but the label reverts to 'Array Controller' in the list of objects. I'll never be able to keep the seven controllers straight in my head. Is there a solution?

The problem is was in Xcode, while editing the xib file. After many back and forth jumps (between Xcode and this composer for the discussion) and many attempts to relabel the array controllers over two hours, the changes have appeared just as I want. I hate it when that happens (who likes egg on their face?)
I'm sorry for wasting your time. Thanks for your input.

Multiple host adapter framework caches in PI 7.1

When I go look at the caches in my PI system, I get multiple host adapter framework caches. That is, when I navigate to http/<host>:50000/dir, then select "Administration" in the upper right hand corner, and then select "Data Cache Overview" I see the following:
af.<sid1>.<hostname1>
af.<sid2>.<hostname2>
Integration server (ABAP) --> this is fine
Mapping Runtime Java --> points to <hostname1>
Mapping Runtime Java --> points to <hostname2>
I just did a system copy (export/import) and I changed all of the parameters. Unfortunately, not soon enough.
Any help is appreciated...

Dumb question:
Do you delete the integration server under the SLD technical systems? That is, "Integration Directory, Adapter Engine, Integration Repository, and RWB (these are all that shows up). If I delete the adapter engine there (it is assigned to the wrong domain), is that the right way?
Or do you do it in the "CIM Instances" --> Class --> XI Adapter Framework (3) entry for the wrong server domain?

Replace Hard Disk ST336607LSUNG36G on Array Controller

Hi,
There is a Sun Fire V65x server that runs Linux Red Hat Enterprise Edition 4.
This server has an Intel SRCZCR Array Controller.
The front panel has the disk light and warning light red. Also, one of the disks has a red/orange light instead of a green light.
The array controller advices there's one missing private hot fix drives missing, but the array also says SMART information is good for every hard disk.
I'd like to know how should I proceed to replace one of the disk.
From my point of view, and after reading the manuals, I have to shutdown the server, replace the hard disk, power up, enter the array configuration, choose I've done it always on Windows machines, but not on linux and Sun.
Repair Array Drives, and ask it to add the new hot fix drive. And that's all.
I understand there should not be do nothing at OS level, because is a Hardware array.
Am I correct?
I've done it always on Windows machines, but not on linux and Sun.
Thanks to everyone.
Alex.

Hi,
In your first post you state that the Hard Drive was failing, what led you to believe this? Ubuntu seems to be easier on the HDD than Windows, so if there is a problem with the drive, it may just not be showing up yet.
Certainly, if there is a problem with the HDD, this would cause the failed recovery and buying a replacement set of Recovery Discs would be of no help.
Check the Hard Drive as follows. Shutdown the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Host Adapter DOCUMENT_WRITE_PREPROCESS Event, not enough time

Dear all
I want to do some stuff before the document saves.
I use the Host Adapter with Illustrator
When I register a handler:
AIEventAdapter.getInstance().addEventListener(AIEvent.DOCUMENT_WRITE_PREPROCESS,handler);
the function gets called when saving, but the document is saved before my actions are finished. Can I get Ilustrator to wait till my function has finished?
In my case I want to write some XMP data right before the document is saved. Is this impossible? What the point of this Event if cannot finish your actions before the actual writing of the document is done?
regards

Or to put it different:
How can I do some action before the actual saving of the document is done. How can I update the XMP data before the data is saved?
How can I make the document saving operation wait for my code to finish?
One hack could be just call the document.save() or document.saveAs() again. But when the user choose some specialised options when he saves a pdf, I don't know this options and will write a pdf with default settings.
thanks

Scriped Host Adapter in IDM

Hi,
I just want to know is Scripted Host Adapter In IDM is supported for AS400 Machine.
As i know AS400 is using TN5250 emulation but Scriped Host Adapter support TN3270 emulation.
If any body have any idea about it will be great help.
Thanx
Shant

Hi,
could anyone provide me sample resource action files for modify and delete action for a scripted host adapter which is used to connect an mainframe resource?
Thanks,

D1000 issues - array controller or host adapter?

Similar Messages

Maybe you are looking for