D11 cast window feature in Windows

I like to have my cast wndow as a 3 wide column on the far
right of the screen. Has anyone else seen the resize feature of
this window? When I go to grab the bottom right tab to resize, it
automatically shrinks by one row, this also happens if I try to
resize from the sides or bottom. It does this until it cannot
shrink anymore. Then you can grab the bottom tab and resize.
Cool joke, but gets a bit boring after a couple of times.
This feature is in Windows, yet to cough up the dosh for the
Mac version so not certain if it happens there too. but I think I
shall wait, judging by D11 in Windows.

awayand wrote:minimize all except shaken window
seems pretty clear to me? At any rate, the things you can make Openbox do are all laid out in the big list of 'Actions' (http://openbox.org/wiki/Help:Actions#ToggleShowDesktop) - ToggleShowDesktop coming closest to what you're describing (basically, it's minimize all and shift focus to desktop). No obvious way to make exceptions, though.
As for _how_ you do it, there's the Bindings list. I dont use much mouse in OB, so you'll have to find it yourself.

Similar Messages

Unable to install windows features on windows server 2012 core datacenter

If I attempt to install, remove, or get windows features via powershell in windows server 2012 core datacenter I get the following error:
PS C:\Users\BB> Invoke-Command -ComputerName CORE1 {Install-WindowsFeature Web-CertProvider}
The given key was not present in the dictionary.
+ CategoryInfo : NotSpecified: (:) [Install-WindowsFeature], KeyN
otFoundException
+ FullyQualifiedErrorId : System.Collections.Generic.KeyNotFoundException,
Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureCommand
+ PSComputerName : CORE1
I get the same error regardless of weather I use install-windowsfeature, remove-windowsfeature or get-windowsfeature. I've tried it on the server, and remotely.
I've also tried managing the computer remotely using another windows 2012 server using the server manager GUI. That causes the server manager to crash with the following error:
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: servermanager.exe
Problem Signature 02: 6.2.9200.16384
Problem Signature 03: 50107b22
Problem Signature 04: mscorlib
Problem Signature 05: 4.0.30319.17929
Problem Signature 06: 4ffa57ca
Problem Signature 07: 210b
Problem Signature 08: c
Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
OS Version: 6.2.9200.2.0.0.400.8
Locale ID: 1033
Additional Information 1: 7a77
Additional Information 2: 7a77983701ecc7870d72712ffa4c3c88
Additional Information 3: 0b4b
Additional Information 4: 0b4b0ba1592ebbc56adc05832bb92aa6
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=190175
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
The server is running all Microsoft updates. Rebooting doesn't help. I've checked the event logs and I don't see anything relevant.
Help!
Thanks
Brad

Hi,
I would like to suggest you first run get-windowsfeature command on the core locally not remotely. And if it works, then try to remote run it.
Invoke-Command -ComputerName CORE1 {get-WindowsFeature }
Regards,
Yan Li
Cataleya Li
TechNet Community Support

Windows Features

Hi,
In Control Panel, we find Turn on/off Windows Features like Windows Media Player, Internet Explorer, Games, etc..
I want to know about all these features for Window 8.1.
From where I can find them so that I can understand when should I use them?
Regards
Gn Jha

Hi Gn Jha,
We could use the DISM command to list all features and enable or disable Windows features.
• Dism /online /Get-Features
• Dism /online /Get-FeatureInfo /FeatureName:TFTP
• Dism /online /Disable-Feature /FeatureName:TFTP
For more information, please refer to the following article.
Enable or Disable Windows Features Using DISM
http://technet.microsoft.com/en-us/library/hh824822.aspx#BKMK_find
Any further questions, please feel free to ask.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Now playing feature in windows messenger no longer works with latest iTunes

I recently updated iTunes to version 7.1.1.5 but now the "Now Playing" feature in windows live messenger no longer works. I had no problem before the update. Any suggestions, as i find this rather annoying
Windows XP

Download & install this security update:
http://support.apple.com/kb/DL1489
Software update should show it as available.

Just loaded latest version of itunes and now it won't open I get the following error message MSVCR80.d11 missing and error 7 windows error 126, can anybody help

Just loaded latest iTunes update and now it won't open i get a message eror MSVCR80.d11 followed by error 7 Windows error 126, anybody help?

Hi Jeff,
see for your problem:
http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
it worked for me.
Grtz

[New Thinkpad Yoga 12 2015] enable Hyper-V feature on Windows 8.1 pro

Hello,
i am a french customer, and i am very interested in the New Thinkpad Yoga 12 2015, especially the version available with Windows 8.1 Pro. and processor Intel Core i7-5500U.
As an IT expert in Database technonlogies, i used to create virtual machines with the 'Hyper-V client' feature available in Windows 8.1 Pro.
- I saw that the Intel Core i7-5500U processor is compatible with the Intel VT-x and EPT virtualization technologies.
- i saw that the Bios menu offers to enable/disable 2 virtualization parameters (link : http://download.lenovo.com/pccbbs/mobiles_pdf/yoga_12_ug_en.pdf)
Do you know if the New Thinkpad Yoga 12 allows to enable the 'Hyper-V client' feature under Windows 8.1 Pro ?
It is very important for me to have this information, because a computer without the 'Hyper-V client' is not usefull for me
So before buying this computer, i have to be sure that it will be able to enable the 'Hyper-V client'.
Thanks a lot for tour reply

Good day.
Please recall that this is a peer-2-peer support community. It's quite possible with the newness of the 2015 ThinkPad Yoga 12 (gen2), that no members with appropriate information have seen your post yet.
From the Community Guidelines:
"While members from Lenovo may participate at intervals to engage in the discussions and offer advice and suggestions, this forum is not designed as a dedicated and staffed support channel."
If you require official Lenovo support, you'll need to contact them directly. I've included the info below.
Regards.
France
Produits gamme Think
Français
Support service & Garantie matériel 0810-631-213
9:00 - 18:00 Lundi - Vendredi
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Reset mypc feature in Windows 8.1

Hi Team,
I am working on reset feature in windows 8.1.I am able to successfully enable the feature and create a partition and able to reset.I followed below steps in order to work.
Shrink the “c” driver with 4 GB space(Since I have only one partition.)
Created a new simple volume with no drive letter assigned to it.
Format the drive.
Assigned the drive letter and created a folder called “RecoveryImage” and copied install.wim file to it.
Remove the drive letter.
Enabled the Windows RE
Set the image using following command
• Set the Recovery image location by below command:
reagentc /setosimage /path
\\?\GLOBALROOT\device\harddisk0\partition3\RecoveryImage\ /index 1
But after resetting pc Recovery partition revealed (I am able to see recovery partition in my computer with drive assigned to it).
Can you please help me to create hidden recovery partition and resolving issue with Recovery partition revealed.
Please don't suggest any tool.
Thanks in advance,
Regards,
Suresh.M.M.

Hi Suresh,
To hide a partition, we can easily to implement by removing the letter via Diskpart command:
1.Type “diskpart” in run command box without quotes. (A command window will get opened)
2.Then type “list volume“. (Your hard disk partitioned volumes will be listed)
3.Now type “select volume <volume number>” – (Volume number is the numeric variable which is shown in the volume listing)
4.Type “remove letter <volume letter> – (Volume letter is the alphabetic character of the drive such as C,D,E,F…Z)
Hope this could be helpful.
Kate Li
TechNet Community Support

Can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I have no idea what that message means; try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then download and reinstall the latest Reader from http://get.adobe.com/reader/enterprise/

Windows 8 Add Features to Windows 8 Pro

Hi,
I have Windows 8 64-bit that was preinstalled on my laptop, now I want to upgrade to Windows 8 Pro 64-bit, I already have the license from my dreamspark account. My questions are, upgrading from Windows 8 to Windows 8 Pro, from the "add features",
is there any danger of data loss (personal files) on the same partition as the Windows and from different partitions? What about the installed programs, such as Visual Studio, VirtualBox, Office, etc.?
I beleive the answer to my question is, no, there isn't any kind of data loss. But I still would like confirmation from an advanced user who has already followed these steps.
Another question is, what if my Windows 8 installed language is Portuguese, and I want to upgrade to Windows 8 Pro English?
Thanks everyone for their answers in advance!

Hi,
Yes, the installed programs would be still available to use.
Here is some reference: Add features to Windows 8.1 (Available in WIndows 8)
You cannot upgrade or keep your Windows settings, personal files, or applications if you are performing a cross-language installation. You can only keep your personal files during a cross-language installation by using Windows 8 Setup.
For more information for the upgrade paths, please see:
Windows 8 and Windows 8.1 Upgrade Paths
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Window Features , how to use it?

Hi!:
At Property Editor of a portal page I can see "Window Features" but I can't find documentation on what put in it or how to use it.
Can I put some argument to change the color of the page? (and only this particular page) something like "BGCOLOR" at html.
Thanks a lot.
RLS

I find it!.
Window Features: Specifies the appearance of the new window launched by an iView whose 'Launch in New Window' property is set to '1'. Enter a comma-separated list of Javascript parameter; for example: 'fullscreen=yes,toolbar=yes'. If empty, the new window apens according to default JavaScrit parameters

ServerSocket bind, bug or windows feature

I wanted to check if a TCP socket was already bound before attempting to use it.
I had my own ideas, but looked for other ideas as well.
While testing these other ideas I stumbled on the following issue.
On Windows XP(SP3), its the work platform of choice, I noted the following from a netstat:
$ netstat -an|grep 139
TCP 10.11.13.98:139 0.0.0.0:0 LISTENING
TCP 192.168.56.1:139 0.0.0.0:0 LISTENING
TCP 192.168.113.1:139 0.0.0.0:0 LISTENING
TCP 192.168.231.1:139 0.0.0.0:0 LISTENING
Note that this is the Windows 'NETBIOS Session Service' of course and that it is bound to all my machines interfaces except for the loopback.
If I execute the following call:
ServerSocket anyAddressSocket = new ServerSocket(139, 2, null);
I will not get java.net.BindException thrown.
I will see a new listener bound to port 139 and the 'any address' as follows:
$ netstat -an|grep TCP|grep 139
TCP 0.0.0.0:139 0.0.0.0:0 LISTENING
TCP 10.11.13.98:139 0.0.0.0:0 LISTENING
TCP 192.168.56.1:139 0.0.0.0:0 LISTENING
TCP 192.168.113.1:139 0.0.0.0:0 LISTENING
TCP 192.168.231.1:139 0.0.0.0:0 LISTENING
But if I replicate the situation using Java on a different arbitrary port as follows:
List<ServerSocket> sockets = new ArrayList<ServerSocket>();
Enumeration<NetworkInterface> enumOfNetworkInterfaces =
NetworkInterface.getNetworkInterfaces();
while(enumOfNetworkInterfaces.hasMoreElements())
NetworkInterface networkInterface = enumOfNetworkInterfaces.nextElement();
List<InterfaceAddress> addrs = networkInterface.getInterfaceAddresses();
for(int idx = 0; idx < addrs.size(); idx++)
InterfaceAddress intFace = addrs.get(idx);
if (!networkInterface.isLoopback())
ServerSocket socket = new ServerSocket(7777, 2, intFace.getAddress());
sockets.add(socket);
// At this point, netstat shows the same output as the first port 139 output above.
ServerSocket brokenSocketNo = new ServerSocket(7777, 2, null);
I will get the expected exception:
"java.net.BindException: Address already in use: JVM_Bind"
I am testing this with Java 6u6 which I know is old, but is what is required to be used for this product.
Is this a bug in the JVM implementation? I cannot find any reference to such in the bugs DB.
Is this a feature of Windows TCP stack?
I have not tried this on a linux platform because I am really trying to understand the issue as exhibited on the MS platform.
Any insight into this would be helpful.
Cheers Mark

Hello EJP.
Thanks for that pointer.
I tried it as you indicated and inside the loop using the following:
ServerSocket socket = new ServerSocket();
socket.setReuseAddress(true);
socket.bind(new InetSocketAddress(intFace.getAddress(), 7777), 2);
Each ServerSocket is now listening on a specific interface using the 'setReuseAddress(true);' call.
This by itself did not change the effect I see when I then make the call 'new ServerSocket(7777, 2, null)' which succeeded with port 139 but not with my port 7777 test.
If I changed the call for the for the 'wild card' address to also use 'setReuseAddress(true);' then all succeeds, but this is not the situation that succeeded with the port 139 test.
I think I am still attempting to solve the issue as a bug or a 'windows XP feature', but I am leaning more about the intricacies of sockets.
I will follow your suggestion and have a look at 'Stevens' 3rd Edition.
Cheers Mark

Windows feature page blank

Hi everyone. I got a envy h8-1513c running on windows 8 64-bit. I went on my windows feature page and I mistakenly unchecked all the features. At this time, no applications or programs were working. I paniqued and I went back to the windows features page and I checked all the features...Unfortunately, it did not solve the issue: I was still not able to run the windows updates and to open files, apps or programs. I ran the BIOS update and when the system restarted to configure the update, the automatic repair started itself. The nb restarted and everything is working fine. Now I'm able to run windows update, open files, apps and programs. However, when I go to the windows features page, it's just blank. . .what can I do to fill it out again. . . does it really matter if it's blank, I mean the nb is working fine so maybe it's not that bad...please help me for this. I have a lot of questions in my mind :-(

Hello thebrave007
I can appreciate your concerns with Windows 8 and I am linking you a document that should resolve your initial query and possibly answer your other questions as well. The document I am linking below is 'Learning How to Use Windows 8 Features and Apps' there are a large number of links in this document to different topics that you possibly have questions about.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03325557
If you have any further questions for concerns please feel free to re-post.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Solved : Turn Windows features on or off is blank or empty while opening

Successfully solved : Turn windows features on or off blank fix
If you are going to enable or disable or installing any feature in windows 7, you have to do the setup through “Turn Windows features on or off” in
Programs and Features.
When you click on it, Windows Features dialog will appear asking you to “Please wait” and it will start searching for a list of windows features such
as games, indexing service, internet information services (IIS) and etc that you can turn on or off. Windows Features is actually pretty much the same as Add/Remove Windows Component in Windows XP. You can also run Windows Features by typing optionalfeatures.exe
at run or command prompt.
ISSUE:
In Windows 7 while going to enable “ Turn Windows features on or off “ in programs and features left side option the dialog it will be came out empty
or blank.
Normally you can able to see “please wait” initially after it tries to list out all the features, but if the machine having issue then it totally shows blank.
For this issue Microsoft has created a knowledge base 931712 to acknowledge the problem and also provided 2 solutions to resolve this issue. but this solution is didn't work & it will not rectify this issue.
SOLUTION:
Download System Update Readiness Tool from Microsoft and install the machine. Please select OS compatible package(OS & supporting bit
version) and download the file.
Article page: http://support.microsoft.com/kb/947821?wa=wsignin1.0
Download Link : http://www.microsoft.com/en-us/download/details.aspx?id=3132
Tool Name:
System Update Readiness Tool for Windows 7 (KB947821) [November 2012] - Windows6.1-KB947821-v25-x86.msu
(System Update Readiness Tool fixes Windows Update errors in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2, and
Windows Server 2008)
once successfully installed then you can go to >control panel >programs and features > and click the left side option “ Turn Windows features
on or off” and check.
If it’s not again listed please restart the machine then check.
After it will work fine.
This is what I faced and fixed this issue after long way through Google help.
If this post was helpful to you please login this site and vote for me.
Thanks & Regards,
D. Jagadish

Dear All,
Thank you very much given good suggestion to me, I'm traded to follow above given steps but not yet resolve. Please help.
Download and installed your given
Windows6.1-KB947821-v33-x86
patch file
Still it’s showing white page while trying to click on
Turn windows features on or off.
Thanks & Regards
Veerababu

Windows 7 shake-window feature in openbox?

Is there a way to implement the windows 7 shake-window (minimize all except shaken window) feature in openbox?

awayand wrote:minimize all except shaken window
seems pretty clear to me? At any rate, the things you can make Openbox do are all laid out in the big list of 'Actions' (http://openbox.org/wiki/Help:Actions#ToggleShowDesktop) - ToggleShowDesktop coming closest to what you're describing (basically, it's minimize all and shift focus to desktop). No obvious way to make exceptions, though.
As for _how_ you do it, there's the Bindings list. I dont use much mouse in OB, so you'll have to find it yourself.

How to handle power managment features of Windows Vista

Hi guys
I searched a little bit in the Toshiba Technical Knowledge Base and found very interesting article about the power management features of Windows Vista.
*[How to handle power management features of Windows Vista|http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm]*
The point is that you will not find a same Toshiba Power Saver tool on Vista like on the Windows XP notebooks and the power saver settings are a little bit hidden in the Vista Power Saver settings.
But you can also control the certain options like Cooling Method or Power Saving Mode.
I think this document could be interesting for some here in the forum!
Greetings to all!

Hi Jayjay
Thanks for posting this here in the forum.
Several days ago I searched for such further power option in Vista.
This document was really, really helpful for me.
Thanks again

D11 cast window feature in Windows

Similar Messages

Maybe you are looking for