D110 printer: all lights flash after new ink installed

Need to know how to reboot printer!  Have lots of work to do!  Thanks!

Hi Joy47,
I see you would like to know how to reboot your D110 printer because all of the lights are flashing since changing the cartridges.
You can try leaving the printer on and unplugging the power cable for 1 full minute. This is called a hard reset.
If the issue persist, please open the following link and select the issue that best describes the symptoms you are experiencing. Errors & lights on the product.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • Officejet 6100: yellow light continues to flash after new cartridge installed

    Printer won't print and yellow flashes. I have reinserted the new HP yellow ink cartridge several times, bu the yellow light continues to blink and the printer still will not print. Help!

    Hello there! Welcome to the forums @minnette 
    I read your post about the issues with the yellow ink cartridge you are facing with your Officejet 6100. My best suggestion to you, would be to try the steps from the document I have posted you below.
    An 'Ink Cartridge Problem' Error Message Displays on the Computer
    If the troubleshooting does not help at all, I would lastly suggest technical support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Printer no longer detected after new router installed. Tried everything. Please help!!

    I have a Photosmart 2575 printer which has worked well for a number of years.  It has a wired connection to my router.
    Recently I installed a new router (Sky fibre hub) and now the HP software (and any other printer/scanning software) is unable to detect the printer on my network.  This is odd, because both my desktop (wired network connection) and my laptop (wireless network connection) can see the printer and I can install it using the standard windows 7 functionality.  I can also browse the embedded web server, so I know for sure that my printer is on my network and accessible.  
    But despite numerous attempts to make the HP Solution Center software to work I am unable to print/scan etc from that software.  I have tried many different "fixes" including full Level 4 uninstalls before reinstalling the software, resetting the netowrk settings on the printer, deleting the printer from everything on the network etc etc but nothing has worked. 
    I have tried using the HP Print and Scan Doctor software but that doesn't help.
    I am totally mystified by this apparent lack of connectivity.
    Can anybody help, PLEASE PLEASE!!
    Alan Phillips
    This question was solved.
    View Solution.

    Success at last, but only after many hours of trawling through HP and Microsoft forums, and numerous attempts to make the connection!
    But here's a summary of what I did for anybody else with this issue:-
    1. I meticulously removed every trace of anything to do with HP from my PC and disconnected the printer from the network router. 
    This requires numerous "level 4" uninstalls to clear any previous falied installs and deleting everything in the temp file afterwards:-
    1. Press the Windows key, and the letter R
    2. Type %temp%
    3. Press Enter, or click OK
    4. Open the 7z folder
    5. Open the util folder
    6. Open the ccc folder
    7. Double click the Uninstall_L4
    2. Using Control Panel_Programs and Features, uninstalling anything left that might be HP related
    3. Carrying out a disk clean up using Start_Accessories_System Tools_Disk Cleanup and repeating this for system files
    4. Follwing the procedure found from the following link to check that the print spooling is working, and that any dependencies are "started":-
    Link to post
    In that thread there is a further procedure to follow which requires opening a command prompt in administrator mode and carefully inputting the command line 
    sc config spooler depend= RPCSS
        (note the space after the = but not before)
    5. Running msconfig.exe and on the general tab, clicking "selective startup", unchecking "load startup items", then on the services tab, hiding all microsoft services, and deselecting all items [remember afterwards to re-run and go back to a normal startup!]
    6. Restart PC
    7. Disable Firewall [remember to enable afterwards]
    8. Launch Internet Explorer (I had previously been using Chrome)
    9. Download AIO software from HP website
    10. Run and connect printer when prompted (making a note of the printer's IP address)
    11. The networked printer wasn't found immediately, so click on advanced and then input the printer's IP address
    12. Success - the printer was finally detected and installed correctly.

  • HP Officejet 6310xi won't print - keeps blinking "reset power" and all lights flashing.

    I have an HP Officejet 6310xi that won't print.  When you select print, the paper begins to feed then suddenly stops before any printing begins and all lights on the face of the printer begin blinking and the message "RESET POWER" blinks in the screen readout of the printer.  When I turn printer off and back on, the screen indicates a used color cartridge is inserted and I hit OK, then indicates used black cartridge is inserted, then I hit OK, then it says it needs to align cartridges, I hit OK.  After trying to align cartridges, it suddenly stops and goes back to all lights flashing and screen flashing "RESET POWER".   I can hit cancel during cartridge alignment and printer goes to normal ready position.  I can then print a test page.  But as soon as I try to print anything else, even the diagnostics page, it goes back to flashing all lights and "RESET POWER".  I did a semi reset (unplug, wait, plug in holding #6) and a full reset (with #9).  That did nothing except wipe out the date on the screen read out of the printer.   So I know the full reset executed correctly but it did not solve my problem.  Please HELP! I am reposting with email me selected - I'm new at this posting to forums...

    johnhp75 wrote:
    how do I reload the software in the printer?
    See link below for the software and driver downloads
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=1120043&
    Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • My eprinter will not print in proper clolour even after new ink cartridges install cleaned nossles p

    my eprinter will not print in proper in  colour even after new ink cartridges installed cleaned nossles as new cartridges still not printing properly
    This question was solved.
    View Solution.

    Which printer do you have specifically? HP makes several eprinters and I want to make sure I get the best information for you that I can.
    Also, have you tried doing a self test print to see if the issue is hardware related versus being software related?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • HT202157 My apple TV is not working with light flashing after up date

    My apple TV is not working with the light flashing after an up date, what can be done?

    same here macbok air 2012 appletv 3 bugs the **** out of me
    it just stops randomly after a "while"

  • HP PSC 1500 printer all lights blinking and will not turn off.

    HP PSC 1500 printer all lights blinking and will not turn off. I had just put a print cartridge in and the problems started. All lights began blinking including the on/off. The on/off button would nor respond. (just kept blinking)
    I opened the printer door and the cartridges did not move back to the right so they could be examined.

    Hi mlbroad,
    I understand that you are having an issue with your printer, and certain lights are blinking. I have included the document 'Blinking Lights'. This document will take you through the different combination of lights that are blinking, as well as steps to provide a solution.
    If this does not resolve the issue, please let me know exactly what lights are blinking.
    Please let me know if this resolves your issue, thank you.
    I worked on behalf of HP

  • HT3917 My apple wireless keyboard is not working after new batteries installed

    My apple wireless keyboard is not working after new batteries installed.

    Do you get a steady green light to say there is a connection.    If not, are the batteries the right way round.   Do you have a monitor to tell the batteries strength. Is there a reading.   Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

  • HP Photosmart C6300 printer/scanner not working after Snow Leopard install

    HP Photosmart C6300 printer/scanner not working after Snow Leopard install
    Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

    Keith,
    I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

  • I have Adobe Acrobat 9 Standard on both of my computers.  Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.  After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software v

    I have Adobe Acrobat 9 Standard on both of my computers.
    Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.
    After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software version 9.0.0 update to the same level as it was before the crash and that the other computer has version named 9.5.5.
    The system for update from version 9.0.0 does not work at all. "There are no updates" listed in the dialog.
    Can you advise how I get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level as the computer had before the crash.

    ftp://ftp.adobe.com/pub/adobe/acrobat/win/9.x/

  • Won't print alignment page or any page after new ink cartridges installed.

    I just installed a new color and a new black ink cartridge into my HP Envy 5531. I have never had an issue with this printer before, owned it for 2 years. After installing it, it tells me to print an alignment page, I press ok. The alignment page comes out only blank. So they cannot scan the alignment page. Now my printer prints like it's running low on ink, but it says that it's full with color and black ink.

    Hi @Aly9008,
    I would be happy to help you work towards a solution. I understand you have installed new cartridges, the levels are good (full), but your print quality is poor. Please use the following document to troubleshoot the issue; Fixing Print Quality Problems for the HP ENVY 5530 e-All-in-One and Deskjet Ink Advantage 4510 e-All....
    If the issue persists, I suggest calling us. Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. We will, at our option, either replace products under warranty that prove to be defective or refund the purchase price.
    We could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
    The number to call is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
    Please use the thumbs up below if you happy with my efforts to help. Best of luck!
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP3070 cannot print after new ink replacement

    I have replaced the Black (564XL Black) the first time a few weeks ago for my HP3070A and it can print normally.
    However when the color ink levels show low levels a few days ago; I replaced them with the new inks 564XL (Y / M / C).
    But the printer does not print and come up with Error Message: "Use SETUP ink cartridges".
    When I put back the old Setup ink cartridges, the printer also cannot print and came up with the same error mesage.  
    Now I am stuck here and just cannot use the printer.
    What should I do to overcome this problem? 

    Are you getting the same error message to use setup ink cartridges?  Here is a really simple step:
    Remove the ink cartridges while the printer is still powered on.
    Remove the power cord from the back of the printer and also from the wall and wait one minute (a complete power-drain on the printer removes false errored states, and when you unplug the printer while it is still on, a hard reset can help stop any internal processes that are stuck).  
    Clean the electrical contacts on the ink cartridges and their associated contact on the printhead while you wait.
    Plug the power cord back into the wall first and then plug the other end into the printer so it will power on automatically.
    When the printer asks to for the ink cartridges, insert them one at a time and try to print something.
    If that doesn't work, don't forget that even though your printer may be out of warranty, the ink cartridges are likely not which still grants you some free support regarding any problems you are having with the new cartridges.  US residents can call 1-800-474-6836 or click here for a number in your region.
    Let me know if this helps any!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • NP Officejet H470 - willl not print after new cartridge installed

    Changed my black cartridge and now will not print at all.  Document shows briefly in printer dialogue box but then disappears.  Printer makes a noise like it wants to print but then nothing happens.  Printed fine before cartridge change!  Any ideas?

    I bought a new unit. First thing it would not work. Pause light and start light flashed. finally after much research on HP site and elsewhere I solved it myself!
    I found a part loose in the unit! Open the ink door, see a 1/8" +/- diameter rod under the print carriage, look at the right end, there is a white part that should be down and probably should click into place. Mine was up at a 45 degree angle. It went down easily, but did not truly click into the receiving hole, however it was enough that the printer worked!
    The left side was down, but yours may bear checking.
    HP puts you through all the testing stuff, but fails to rememder that printers are electro-MECHANICAL devices and can fail on the mechanical side.

  • Problem installing Flash MX04 after new OS install

    Hello,
    I have just installed WIN XP Pro that came with SP2 on my
    notebook. I am trying to install my Studio MX04 suite but when It
    gets to flash MX 04, it gets to 95 percent of the install and
    shoots an error out.
    The error is the following:
    Unhandled Exception
    Error Number: 0x80040703
    Description: Failed to find dll function:
    Macromedia_Licensing_Installer.CdaSysInstallEx2
    Setup will now terminate.
    This message comes after being 95% completed according to the
    install progress bar.
    Background:
    The notebook is a HP Pavilion zd7160us with 512 MB RAM and
    2.8 GB Processor
    Totally new clean install of Win XP Pro with SP2 (just
    purchased)
    Legal copy of Studio MX 2004 (just installing again after
    wipping the other OS off)
    DW, FW, FHMXa, and Extention Manager all installed without a
    hitch.
    Was installed previously on same notebook with XP home.
    I have found other forums where people are having this same
    problem but with no resolution to the problem, and all of the
    inquiries seem to be linked to SP2.
    I would really like it if someone knew why this is happening
    and how to fix it.
    Thanks,
    Bob

    I seemed to have solved my issue!
    For some reason there was a Flash MX 2004 folder in my
    system, there should not have been because I formated the drive
    when I installed the new OS. But I deleted that Flash folder as
    suggested in another forum and the install went through fine. I am
    now downloading the updater 7.02
    You can check out the source of the solution here:
    http://www.thenaip.org/forums/printthread.php?t=8218
    Thanks

  • HP C7200 printer/scanner not working with Mac after new router installed.

    I recently had my DSL modem go out and replaced it with a combo modem/wifi router. Since the install, my mac can't detect my printer. If I install it via the printer's IP, it'll detect ink levels for a day or two, but still won't print, and won't even detect the scanner. It says the printer is off-line when I try to print. I've rebooted everything, reset the printing system, downloaded updates, and downloaded the latest HP software. Nothing helps. So much for "just works".
    My little Windows 7 computer was totally trouble-free after I reinstalled the printer.

    If the printer does support Bonjour and it does not appear in the Default Add Printer view then I would say that the Mac is set to a different subnet to the printer (and the Win7 PC). This could also explain why you can add the printer via IP but it won't print.
    If the Mac is definitely on the same IP subnet as the printer then check you don't have an application running that could block Bonjour.
    With regards to IP queues, ensure you select HP Jetdirect rather than the default of IPP (Win7 will be using Jetdirect which is known as Port 9100). Also, some drivers cannot be used with network connections. If the printer supports Postscript then try a Generic Postscript printer to test. If it doesn't support PS but supports PCL then there is a Generic PCL Laser driver you would try.

Maybe you are looking for