D20 + SATA ONLY + WINXP SP3 32BIT

Hi all,
Currently testing a D20 for the business and cant get the D20 to run as a SATA drive only. Currently its spinning up the Marvell controller with a 500GB drive in.
Have tried going into the BIOS and disabling the RAID controller but then I cant seem to use the HD as just a SATA drive.
The only joy I've had is plugging in a floppy disc with 32bit Marvell controller drivers booting up with WinXP 32bit, as it going through install hit F6 to install controller drivers then once I hit continue to get back to the setup/format drives I get a blue screen of death. The strange thing is if I use our WinXP SP3 32bit Microsoft licensing copy which it MUST be installed with I get this BSOD but if I through in a Dell WinXP SP3 32bit OS disc I can install the operating system no problem at all!
All I want to do really is disable the RAID controller (somehow) use SATA single drive only and install WinXP SP3 32bit using our Microsoft Licensing copy with out it blue screening!!
Any help would be fantastic!
Cheers,
Ant
Solved!
Go to Solution.

Hi all,
Not to worry I have managed to work it out
For all thoses that need to know too I'll post an update of instructions on how to do it in a bit after I have successfully installed the operating system
Kind regards,
Ant

Similar Messages

WinXp SP3 (32bit OS) paging file peaks and locks up Captivate

We recently installed Captivate 4 on one of Windows XP SP3 (32bit OS). When the user is using text to voice tool, the pageing file started growing and it peaks at 1.85 GB and Captivate locks up. The PC has 2 GB of Physical memory. I had chaned the value of the paging file, but the issue still occurs. Also I upgraded the phycial memory to 4GB and it did not help either. So current work around is leave the performacne window open and watch out for paging file grwoth. Once the paging file reaches 1.5 GB, user closes out the application and that flushes out the paging file. The size of the project is approximately 90 MB.
Also we have installed the app on another machine and getting the same result.

Please, I do not understand your last posting very well. Did the user create a project, based on a PPT (2003 or 2007)? And he added Question slides (branded CP) to the project? What do you mean by creating questions/answers from the PPT-slides?
Lilybiri

Will 29.0.1 install & run with WinXP PRO SP3 32bit, need to know soonest?

Version 29 says it is up to date on my system, makes no mention of 29.0.1, how do I get latest version if version I have will NOT download it. My computer is Asus A8n SLI Deluxe with AMD 32/64 bit 4000+. Please help?

The minimum for Windows is still WinXP SP2 so yes it works on WinXP SP3.
http://www.mozilla.org/en-US/firefox/29.0.1/system-requirements/

BSOD-Problem ha20x22k.sys X-Fi WinXP SP3 multicore-processor

Hi @all,
I already read around this forum & know that the bluescreens in connection with ha20x22k.sys only happen on WinXP SP3 machines with multicore processors. There seem to be a beta driver XFTI_PCDRVBETA_2_7_0005.zip that fixes this issue. There are several postings about it here in this forum and Google finds more elsewhere.
Only there is no download link.
Where can I get XFTI_PCDRVBETA_2_7_0005.zip?
Sincerely - Harry Zingel - www.zingel.de

Hi!
I had similar problems with a older Creative Cards. This ist PCI-IRQ Routing problem most caused by a Bios that is not 00% ACPI compatible, even if the manufracturer say it is 00% compatible.
I solved this with a Bios upgrade or before is did the Bios upgrade i changed the ACPI kernel to a MPS kernel (i wont suggest that because if something goes wrong, it is not easy to repair the OS and needs much OS-internal-related knowledge to do this).

PM7 and WinXP SP3

Following a disaster, I replaced the primary HDD on my home PC with a brand new one last wekend.
After re-installing WinXP, MSO2K3, CS2, the thousands of updates which took hours and a call to Adobe for new activiation code as I wasn't able to de-activate, there being an HDD failure, I can confidently assert that PM7 (followed by the updates to PM7.0.1a) installs perfectly. And yes, there is a minor error/typo somewhere in the PM7.0.1a update which calls it PM7.0.1.
And my positively ancient T1 fonts (Gill Sans, Times New RomanPS and Courier) from 1991 were all added by the windows Font manager as expected and without a hitch.
Export… AdobePDF… also worked perfectly first time with PM figuring it all out by itelf with Distiller 7. (My default printer is an HP Laserjet 2300PS which probably helps.)
So for anyone who is having problems with PM7 and WinXP SP3, I can only conclude that years of accumulated windows junk is where to look.
As they say with windows, if a re-boot doesn't solve, re-install!
Iechyd da! John
22:02 10/11/2009 GMT

Hi,
dbgallo wrote:
>
> So here's one we've been working, no solution as of yet...
>
> PC prior to SP3 is SP2 with all current patches, BM is 3.9sp2 and the
> server is 6.5sp8 with all current patches. Client is 4.91sp5. CLNTRUST
> is loaded from the edir login script. with a DWNTRUST proceeding it.
> CLNTRUST is the version that comes with BM3.9SP2. Windows Firewall is
> disabled by GPO.
>
> We push out SP3 and after reboot, the user gets the prompt to login to
> BM. reboot the pc 1, 2, 3, 4, up to 8 times to get it to work normally,
> it does work eventually.,
>
> What's causing it to fail? it's not on every machines, but some do take
> up to 8 reboots to use CLNTRUST again
Not enough information, but my best guess is a: INstalling SP3 always
reenables the (new) Firewall. Potentially your GPO doesn't always take,
and needs several reboots.
But to find out what's going on, the details of the clntrust status is
needed, and potentially a lan trace. If the clntrust tstus doesn't show
any requests (and that's my guess), then my guess becomes almost
certain.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Custom Connection Manager only works in 32bit- 0xC0011008: Error loading from XML

I have a very basic / stripped connection manager with only one property (SSIS 2012). It works fine in design time (you can open the connection manager editor and change the value), but in runtime it only works in 32bit mode. The runtime-validate-method
does work, but if everything validates OK then in 64bit it throws an error when you run the package:
Exception deserializing the package "The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information
can be stored.". This occurs when CPackage::LoadFromXML fails.
The 2 VS projects are .Net 4 class library projects with the Build Platform on "Any CPU"
I only add references to:
Microsoft.SqlServer.ManagedDTS - C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.SqlServer.ManagedDTS\v4.0_11.0.0.0__89845dcd8080cc91\Microsoft.SqlServer.ManagedDTS.dll
Microsoft.SqlServer.Dts.Design - C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.SqlServer.Dts.Design\v4.0_11.0.0.0__89845dcd8080cc91\Microsoft.SqlServer.Dts.Design.dll
Compiled DLL's are available in GAC and SQL Server connections folder:
I made the sourcecode available via codeplex:
https://ssisconnectionmanager.codeplex.com/SourceControl/latest#myFirstConnectionManager/2012/myFirstConnectionManager/myFirstConnectionManager.cs
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

AppPrincipal (identity) related? Hint http://serverfault.com/questions/339747/the-package-failed-to-load-due-to-error-0xc0011008-error-loading-from-xml
Arthur My Blog
Hi Arthur,
Looks like something similar (same message, same 64bit issue), will try that tomorrow! But sounds weird that you should tell SSIS which identity to use...
Found the same thread in MSDN:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/47d185d3-c801-45cf-becd-3c2524d98353/the-package-failed-to-load-due-to-error-0xc0011008-error-loading-from-xml?forum=sqlintegrationservices
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Problem opening Canon 6D RAW even after upgrade today to PS CS6, WinXP-SP3

Givens: PS CS5>CS6 upgrade via $199USD download today, Non-CC upgrade. OS: WinXP SP3, camera: Canon 6D RAW (.CR2 files) and prefer to work on RAWs via Bridge.
Main goal: view Canon 6D files in Bridge, do adjustments, open via ACR into PS CS6 for further work.
My fav workflow for photos is: Bridge>ACR>PS. Just got a Canon 6D camera. So I updated to PS CS6 today and I did go through PS CS6 menu: help>update mechanism for all available updates, which was one round of ACR (and Bridge) updates, no more were offered. That brought ACR from v7.0.0.308 to v7.1.0.354--still could not see Canon 6D RAW files. I went to Adobe.com and did manual download for ACR/DNG 7_3 but it did not enable Bridge to see my new camera files nor could I open the 6D .CR2 files in PS. Got PS error message about not recognizing filetype, update ACR, etc (which of course I just attempted). (Seems as through PS and Bridge did not know the ACR/DNG 7.3 "existed" IF that is a capability).
Then I tried to install ACR 8.7 from the "Fix your 6D RAW problems page" and got error messages in PS CS6 (perhaps bc I am on 32-bit system). Decided to start from scratch; uninstalled PS CS6 upgrade.
Secondary issue is: Now I have uninstalled PS CS6 and done System Restore to the point just after I downloaded PS CS6 upgrade. I want to reinstall but the installer fails. Support chat told me to download PS CS6 Upgrade again (doing that now), then reinstall.
Solve: Main problem: Be able to work on Canon 6D RAW through Bridge and ACR (prefer NOT to workaround with DNG if possible) At time of writing, as mentioned, I am downloading PS CS6 upgrade again, then plan to reinstall. If that works, then I need steps to update ACR so that I can work on 6D RAWs through Bridge and ACR. Please know that going through Photoshop's Help>Update mechanism does NOT seem to work. Do I need manual updates? If so, please direct me to the correct ones and order of procedure to execute this upgrade successfully.
Many thanks, Paul

Yammer, thanks for the info about Camera Raw 8.3--that is my goal to load PS CS6 Upgrade and update to Camera Raw 8.3 Currently, I am having problems installing PS CS6 upgrade after uninstall. I have used Adobe CC Cleaner several times. It seemed to help, and the installer proceeded further with next try. Then I looked and there was no PS CS6 icons. I have done system restore also several times and am about to try again. It seems that my original PS CS6 upgrade installed, but when I tried to load ACR update, problems arose. Is there a way to remove recent version Camera Raw remnants from my computer. There is no Photoshop CS6 folder and further none for the CameraRaw.8bi for PS CS6. One possible clue: Yesterday I did two upgrades: 1) PS CS4>CS5 via box, then 2) PS CS5.CS6 on-line download non-CC. In one round of update, I saw that PS CS*5* Extension Manager failed to update. Seems unrelated but mentioned here for thoroughness.
Running ACR 8.3 in XP SP3 would be most useful and timely today as I have work to do. Many thanks, Paul

WinXP SP3 and Boot Camp 2.1 | Win BSOD ATI card not correct!

Configuration:
Loaded and OEM WinXP SP3 on an iMac with Boot Camp V2.0. All worked correctly.
Immediately after Boot Camp 2.0 completed installed Boot Camp V2.1. All worked correctly.
Problem:
Working in Windows the OS triggered a BSOD (Blue Screen of Death) after the OS was up for approximately 10 minutes. This was a repeatable problem.
Investigation:
Downloaded Windows DeBug utility to analyze the crash dump files from the BSODs. For reference on how to read the Windows dmp files and how to use Windows DeBug utility see the following link.
http://www.networkworld.com/news/2005/041105-windows-crash.html
Determined that the fault was caused by a driver file ati2mtag.sys.
Checked the version with the latest availble from the manufacturer ATI. It was the most recent version
Analysis:
In Windows right click on My Computer, go to Properties.
Go to the Hardware tab in Properties, and then to the Device Manager, drop down the Display adapters. The model shown was a Mobility Radeon HD 2600 XT!
This is WRONG, the video card in this iMAC is a ATI Radeon HD 2600 Pro.
Conclusion:
Windows and or Boot Camp loaded the incorrect video drivers for the video card.
Solution:
1. Download and install Dot Net 2.0 because the ATI driver installer requires this level to install required drivers. The download is available at the following link.
http://www.microsoft.com/downloads/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD -AAB15C5E04F5&displaylang=en
2. Go to ATI driver support page and download the latest Catalyst driver for 32-bit XP.
http://game.amd.com/us-en/drivers_catalyst.aspx?p=xp/radeonx-xp
3. After download, launch the installer, just proceed with the installer until it gets to the point where it pops up an error message saying that the installer could not find a suitable driver for your hardware.
4. Close out the installer and right click on My Computer, go to Properties.
5. Go to the Hardware tab in Properties, and then to the Device Manager, drop down the Display adapters, and you should see Mobility Radeon HD 2600 XT, this is incorrect.
6. Right click on the video card and choose Update Driver, you will be now see a Hardware Update Wizard.
7. It says Can Windows connect to Windows Update to search for software? Select No, not this time, and click Next... Now you should see What do you want wizard to do? Select Install from a list or specific location (Advanced), and click Next.... On the next page select Don't Search. I will choose the driver to install, click Next....
8. On the lower right corner of the Wizard, Have Disk... Now click Browse and go to C: > ATI > Support > Driver, and select the inf file in there, click Open.
9. Scroll through to locate and then select ATI Radeon HD 2600 Pro, and install that, you might get a message saying this driver isn't certified, ignore it and continue.
10. After completion, reboot.
My system is now running correctly, no more BSOD's!

hmm, is it possible that the same problem of the imac is mine on the macpro with 2 ati 2600 cards?
from where do you know that the recginized xt card is wrong and it must the pro version? cause of the 256mb to 512mb at the offical xt version?
plz take a look at my problem thread:
http://discussions.apple.com/thread.jspa?threadID=1686327
thx alot

MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 developer

MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 Developer Suite.
I can see the backplane in MAX and Project explorer but none of the modules show up for configuration in the drop down lists. The LV was just installed on the PC with RT/FPGA/Sound and Vibration. I have Admin and am accessing through a PCMCIA Ethernet card. I have to disable normal wireless Ethernet just to see the cRIO unit at all.

Well, you actually won't be able to see the C-series modules for a cRIO in MAX. Take a look at this KnowledgeBase article for a little more information.
As far as not being able to see them in the Project explorer, are you trying to run in FPGA or Scan Interface? If you're using the FPGA Interface, you'll have to make sure to expand the FPGA Target tree in the Project explorer to see these modules.
Regards,
Austin S.
National Instruments
Academic Field Engineer

On updating from FF3.5.10 to FF3.6.6; No session-restore option, no menu drop-down "Recently bookmarked" list. (winXP sp3)

On updating from FF3.5.10 (good :-) to FF3.6.6 (bad :-( ): No session-restore option; no menu drop-down "Recently bookmarked" list. (Sys=winXP sp3)
1. can a non-techy fix this? :-(
2. how do I recover to FF3.5.10? - I liked it very much ! - thanks to all at Mozilla :-)

Make sure that you not run Firefox in [[Private Browsing]] mode.
In Private Browsing mode some menu items are disabled (grayed) and some features like visited links and others are disabled and not working.
You are in Private Browsing mode if you see "Tools > Stop Private Browsing".
See [[Private Browsing]] and http://kb.mozillazine.org/Issues_related_to_Private_Browsing

DESPERATE HELP PLS: WinXP, SP3: Creative Console and other elements crashing

LDESPERATE HELP PLS: WinXP, SP3: Creative Console and other elements crashingRHi all. Hoping someone out there can help; I've been going around in circles for far too long on this.
Exec summary:
WinXP, SP3, Audio finally is working, Creative Console launches but crashes consistently. Diagnostics fails, on-screen could not install.
System:
WinXP, SP3
Story
I had an original X-Fi card that came with my Dell XPS70 3 years ago. Working perfectly, until I upgraded to WinXP, SP3 (from SP2).
BAM - lots of BSODs, always in ha20x2k.sys. Many times, all networking would just stop, and the BSOD would happen when shutting down the computer. Networking would fail 00% everytime I watched any kind of video (news, youtube, whatever).
Couldn't find more current drivers, bought X-Fi ExtremeGamer card from Frys. Could not get this to install off the package CD, new card was not recognized by Windows. Install would always hang on "On-Screen display" (I have a dual monitor system - should that matter?)
Eventually, downloaded more current drivers and console app from the Creative website and got audio working. Console will now launch but the moment I try to change something in the EQ panel, the console crashes, 00% of the time. Other Creative apps (e.g. diagnostics) fail with this error:? "The audio device supported by this application may not be present or may be operating in an unsupported mode..."
I haven't been able to "cleansweep" my system, the link in this (Creative) forum is broken.
REALLY hoping someone can help get this working... Have spent 2 days away from business to try to make this work properly, and am out of things to try.
Thanks,
Jerry

I should add - I have NO interest in gaming, just looking for high-end audio...

"System Update could not start properly" - New error just started (WinXP SP3)

I can no longer run System Update; it displays the splash screen, then a small window pops up with the above error message. I just ran it last a day or two ago, and it installed a few things; since then I have also run Microsoft Update and it also installed a few things, which I backed out one at a time (except for the malicious software removal updates)--all to no avail. Anyone else seen this, any suggestions?
Thanks,
Jonathan
--T61 (6460-8VU) - WinXP SP3, all the latest patches (except for KB961260, which is still backed out); .NETFramework 3.5 SP1

Hello,
I have reinstalled the system update after I did clean and download the last version from Lenovo website but still have the same pop up message says: Syystem Update could not start properly.
what's wrong??????

D20 now only available with Windows and SATA...??

As of this morning, the Lenovo Thinkstation D20 on the US site is only available with Windows and SATA hard drives. It used to have SAS drives and DOS available.
They may just be low on inventory, or maybe... ?
FWIW
JohnV474
Solved!
Go to Solution.

Kind of funny you mention this as a few of my team members and I were digging through the CTO site today. Considering the crazy number of various parts/options that we have qualified for the S/C/D 20 platforms, there are a ton of omissions on the CTO site. I know they pull some various options from time to time because of inventory or end of life concerns, but the configs that were showing up today as available really made no sense. Unfortunately there's not a lot I can do from my side to get this resolved other than raise the complaint. I'll see what I can do though.

D20 sata disk support advanced power management

My d20 comes with a sata 250 GB WD (WD2500AAJS). I have centos 6 on it now. hiberate seems not working on this box: 1. after hibernate it automatically power up but boot into a black screen with backlight on.
2. pm-suspend.log shows that everything is successful during hibernate stage, except that /usr/lib64/pm-utils/sleep.d/99hd-apm-restore.hook hibernate hibernate: Advanced Power Management not supported by device sda. (the WD disk is the only disk plugged into the system for debugging purpose)
3. hdparm -i /dev/sda returns AdvancedPM = no
My first step is to work on the hiberate/restore problem (leaving auto reboot later). So the problem and log/hdparm messages are consistent that the sata disk does not support apm. how to turn on the apm support? is there any specific option to specify in the BIOS? is there any bit to flip on the hard disk? ... (right now BIOS enables AHCI mode and in native IDE mode, disk connects through Marvell controller)
Thank you very much.
Solved!
Go to Solution.

Hi, psuturtle:
Thank you for quick reply. This is the least I want to hear. It seems much on my own.
Googled around found a couple of related topic:
1. http://wdc.custhelp.com/app/answers/detail/a_id/958/~/how-to-enable-and-disable-pm2-%28power-managem...
Basically, WD sata disk is by default disabled with its APM. It instructs to "place a jumper shut on pins 3 and 4", though I haven't tested it. I don't know how windows circumvent this hd option problem though. On the other hand, if the disk is connected to one of the 3 IDE connectors (for optical drives), suspend/hiberate works fine although having slow I/O after resume (I did this with Fedora 14/15 but haven't tried on centos). So I guess it is Marvell Constroller drive might have some unexpected effort here.
Well, thank you anyway.

ReaderX, WinXP SP3, Protected Mode for Admins

Hello,
We are having an issue running Reader X on Windows XP SP3 ***IF*** the Windows user is a member of the Local Admin group, it will not open in protected mode. **IF** the Windows user is a member of the local user group, Reader will open in protected mode. This happens whether we try to open PDF for just the application.
I reviewed the link provided with the Protected mode window, and the only item I could find that fit my situation was the fact that I had Symantec's Endpoint Protection (SEP) installed. We were at a lower version than was stated so we upgraded. That seemed to resolve it for a Windows User but not a Windows Admin.
I entered case with Symantec, but we determined it wasn't a Symantec issue, since after uninstalling SEP the error can be replicated.
Any comments or assistance would be greatly appreciated. Luckly 99% of our users belong to the Local Windows User group.
Is this working by design?
Thanks Amy

[ moved to the Enterprise Deployment forum ]

D20 + SATA ONLY + WINXP SP3 32BIT

Similar Messages

Maybe you are looking for