D20 using DVD on Marvell SAS controler

I was wondering if I can use a DVD drive on the Marvell SAS ports because I would like to use all the available SATA ports on the motherboard. The reason for this is that I was told that I would get better performance and also trim support if I use the ICH10 ports for my bood drive that is an SSD so now I can not use the one of the 3 ports for my optical drives. Is what I am doing ok or is it better to use the SAS controller for my SSD
Thanks for your help in advance.
Miike
Solved!
Go to Solution.

using the marvell controller for optical is fine. if you need TRIM support then ICH10 is your only choice.

Similar Messages

(D20) Marvell SAS/SATA Controller Utility under Vista X64

Dear All,
I am the new user for Lenovo workstation. recently I bought D20 for my work. I use the Vista X64 as my O.S. for D20 and I also setup the RAID5 under Marvell SAS Storage Controller.
Everything running well presently, but I can not find the Marvell SAS/SATA Storage Controller utility to monitor the RAID volume under Vista x64 ?
Can you advise me where I can find it or how I can monitor the RAID volume under Vista X64 ?
Thanks,
Cody.
Solved!
Go to Solution.

cody,
currently that's the only version available that i could find and the only one listed on the D20 driver matrix page.
all you can do is try installing it in vista and see if it works. most likely it will.
-erik
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Can I use DVD SP for an interactive presentation?

Howdy.
I have a client who wants a standalone presentation that can be played on a display at a tradeshow booth, but also wants it to be a speaker support presentation that pauses on each slide.
I'm thinking about doing it in Flash, but I was wondering if I could do this in DVD SP.
I could create a main menu with the two versions listed, fine.
But on the speaker support version, it needs to play and pause each slide and then continue to the next slide when the speaker clicks.
From my experience with pausing DVD, the interlaced nature makes it look bad paused, so I was thinking that each slide would be a track in DVD SP and I would just have each video (slide) hold on the last frame for a few minutes. I'd have buttons on the screen to go to the next track and the previous track.
Do you think that will work? Is there a better way?
The reason I'd prefer to use DVD SP over Flash is you just put a DVD in and it plays whereas Flash has computer/OS support issues and PC screen resolution issues and my client would need a PC in their booth versus just a DVD player.
Make sense?
I appreciate any tips or help.
Thank you!
Scot

So I don't see any way to have the remote control jump backwards on tracks. The only way I made it go forward is I put an End Jump at the end of the track and then used the Track Skip Forward button. But this doesn't work to go backwards, obviously.
I could use chapter markers and put every slide on a single track and jump between chapter markers easily, but it doesn't pause at the end of each chapter.
Am I missing anything obvious to create a "slide" presentation with motion graphics in DVD SP?
Thanks!

How Do I Use DVD Studio Pro Files In iDVD?

I had somebody create a DVD for me using DVD Studio Pro. (This was a compilation of many different videos.) It turned out great.
I now want to make a DVD of one of those videos on my own using iDVD '08.
I have the raw video/audio files. But, my problem is the raw files that were used for the DVD Studio Pro project are separated into one video file and one audio file. I don't know how I can get them both into iDVD. I was told that I have to recombine these two files into one file. But, how do I do this and still maintain the best quality?
(I am not a video expert by any means, but I can tell you that the video file is a ".mpeg" and the audio file is an ".ac3". When looking at the .mpeg file in the finder it lists its Kind as "MPEG Movie" and when looking at the .ac3 file in the finder it lists its Kind as "Unix Executable File".)
(I'm using iDVD 7.0.1 - I do have Quicktime Pro - I do not have the Quicktime MPEG-2 Playback component - I do not have DVD Studio Pro)
Thanks in advance for your help!

Q: How Do I Use DVD Studio Pro Files In iDVD?
A: You don't, essentially.
DVDSP is apple's top end app and it is intended to be used with FCP > Compressor > DVDSP. All of these are pro apps.
i-Apps are consumer apps all of which are QT based. With that in mind ....
now that doesn't mean you can't use FCP > iDvd. You can. But you have to do it in a way that iDvd will read all the files (meaning you must think in terms of QuickTime and export in this way). So when you export your QT File / Movie from FCP over to iDvd, it will look something like this hopefully regardless of the raw image & audio files you have already compiled which unfortunately will NOT work with i-Apps BUT will work with apple's pro apps which is the intended workflow / direction of said files in the first place.
Btw ... if your QT movie has chapter markers then please use the following settings so iDvd can read these markers. (if on the other hand you were looking to export this file to DVDSP; then you would choose DVDSP Markers.
Let me know if the above helps. If not, just come on back.

How do I use the Oracle Developer Reporting Control in Visual Basic 6.0?

I was wondering how to use the Oracle Developer Reporting Control componant in Visual Basic 6.0 to generate reports in Oracle Reports? Any help would be appreciated.

Hi Rohit,
Would like to ask you some questions about the oracle report with Visual Basic.
1. I have a report built in oracle report. Currently there is a Visual Basic program want to pass some parameter to this report. Can Visual Basic program pass the parameter to this oracel report?
2. Based on yr answer, do i have to installed the oracle report? or just copy and register the Rwsxa60.ocx (i'm using oracle report 6i) in the PC? So can i use this activeX control.
3. Is this activeX control similar to Crystal report object which can found in VB?
4. Is there an example/guide on how the Visual Basic pass the parameter to oracel form?
Your answer will be much appreciated.
Thanks.
Regards,
Hock Leong

Do I need to set something when using Dynamic VIs to pass control values to an executable VI

I am using VI server to pass control information from one VI to another.
In the development system this works fine.
How ever once I build the VI's into an executable the values from one of the VIs does not get passed.
I use the same method in three different applications, 2 of the applications work fine, but one does not.
The only thing I can think of is that there is something that needs to be set that I did (without realizing) in the first two but not in the third.
All the Applications run fine.
The problem that occurs is in the values passed. The same value gets passed everytime this turns out to be what ever the default was prior to running application builder.
I a
m currently using 6.02.

Kandrew wrote:
> I am using VI server to pass control information from one VI to
> another.
> In the development system this works fine.
> How ever once I build the VI's into an executable the values from one
> of the VIs does not get passed.
>
> I use the same method in three different applications, 2 of the
> applications work fine, but one does not.
Are you using Call by Reference or Set Control Value method? The second
absolutely requires the Front Panel to be present to work properly. The
LabVIEW application builder wants to remove the Front Panel by default
if the VI hasn't been configured to show its front panel when called or
doesn't have at least one Control Property Node in its diagram.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

I have a football game recorded on a DVD R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit.

I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit. My MacBook operating system is Mac OS X, version 10.5.8. DVD Player is App version 5.0.3, framework version 5.0.7.
However, the DVD+R works on both my Dad's and my brother's laptops. My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9. The DVD Player is version 4.0. My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2. The DVD Player is App version 5500.26.1 and framework version 5.5.0. The DVD+R plays fine on their laptops, but will not play on mine.
Anthony

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

To run OHS at port 80 using solaris role based access control

Hi.
I already know & have done setuid root to ohs/bin/.apachectl to allow ohs to listen to port 80. Now on a new OFM 11.1.1.4 install, I want to use Solaris Role Based Access Control (RBAC) instead. Is it possible? RBAC does work as I can run a home built apache2 httpd at port 80 withOUT suid root.
On Solaris 10, I enabled oracle uid to run process below port 1024 using RBAC
/etc/user_attr:
oracle::::type=normal;defaultpriv=basic,net_privaddr
Change OHS httpd.conf Listen from port 8888 to port 80.
However, opmnctl startproc process-type=OHS
failed as below with nothing showing in the diag logs:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=truffle:6701
0 of 1 processes started.
ias-instance id=asinst_1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohs1/OHS/OHS/
Error
--> Process (index=1,uid=187636255,pid=25563)
failed to start a managed process after the maximum retry limit
Thx,
Ken

Just to add my two cents here.
The commando used on Solaris to assign the right privilege to bind TCP ports < 1024 is:
# usermod -K defaultpriv=basic,*net_privaddr* <your_user_name>
Restart the opmnctl daemond.
After that OHS/Apache user can bind to lower TCP ports.
Regards.
Edited by: Tuelho on Oct 9, 2012 6:05 AM

How can i use the ACL file to control the access from the other website?

Hello all~
My Sun one is 6.1 sp3 on Windows 2003 SE, and I am try to use the ACL file to control the access.
My ACL file is below:
version 3.0;
acl "path=my_path_on_HD";
deny absolute (all)
(user = "anyone") and
(dns = "*.my_site.com");
deny absolute (all)
(user = "anyone") and
(dns = "*.other_site.net");
Once I add the "deny", anyone include my site is decline for vist the path specify in the ACL file. But if remove the "deny", everyone include other one's website can access the file.
Can anybody tell me how to make it work?

I think you've misunderstood what the dns attribute is for. The dns attribute returns the hostname of the client accessing your website, not the hostname of the website that linked to your website.
For example, when someone using the Comcast ISP goes to a malicious website at example.com that loads images from your website at www.amigoo.net, the dns attribute will be something like "c-1-2-3-4.ca.comcast.net", not "example.com". ACLs are used for authentication and authorization of clients (not the websites those clients chose to visit), and they don't provide the functionality you're looking for.
If I understand correctly, you want to prevent websites other than amigoo.net from linking to files in your d:/webserver/imat/pics_upload directory. You can achieve this adding the following lines to your obj.conf configuration file:
<Object ppath="d:/webserver/imat/pics_upload/*">
<Client referer="*~*amigoo.net">
PathCheck fn="deny-existence"
</Client>
</Object>

Can I use a midi console to control GarageBand?

Hi all,
I'll start off by saying I've never been a huge audio guy; just know enough to get by. Basically, I recently was given two consoles; Yamaha AW-4416 & Tascam TM-D1000. Both are slightly old, but new in box. At the moment I'm keeping both since I do school shows and such from time to time. They are really both designed around recording; and both also have midi out. Is there a way to use the midi out to plug into my Mac and use one of them to control GarageBand? I.e use the channel faders to control channels in GarageBand. I also have Adobe Audition.
Thanks

Is there a way to use the midi out to plug into my Mac and use one of them to control GarageBand? I.e use the channel faders to control channels in GarageBand.
As far as I know, Bob, Garageband automatically assigns midi CC settings, and there is no way to override these assignments. So while some of the faders and dials might end up controlling various things, there is no way to, for example, ensure that your controller's volume fader is assigned to CC7.

Use one fpga vi to control two targets

Hi,
I have two fpga because I need more than 8 analogue output and analogue input. I wonder if I can use one fpga vi to control two targets (the two FPGA boards I use are PCI-7833R) so that the outputs can be synchronized. I think if it's possible it'll be easier to implement the synchronization between while loops,etc. If it's not possible, how can I interface between between fpga.vi and make the synchronization possible and make two vi's talk to each other? Thank you very much for your help!
Thanks,
Charles

I have successfully ran the same code on two (2) different FPGA boards. The difference being that the host will use different Aliases to control the FPGA boards,
Both FPGA Boards MUST be the same type ( I used PXI-7811s).
My program consisted of 6 individual communication portals and there was NO synchronization between boards
Visualize the Solution
CLA
LabVIEW, LabVIEW FPGA

How to use single element as both control as well as indicator in labview

Hi All,
I need to use single element for both control and as an indicator.
I need not want to use its value property os shift register.

Hi pmg,
I think this thread will be helpful to you.
http://forums.ni.com/t5/LabVIEW/Using-a-control-as-both-an-indicator-and-control/td-p/1113158
Thanks as kudos only

How to prevent others use their iDevices to remote control apple tv?

Hi All,
I'm wondering that does anyone know how to prevent others use their iDevices to remote control my apple tv?
settings
1. the apple tv is in the school.
2. all students could access the Internet
3. The apple tv is sharing the same Internet with students.

Welcome to the Apple Community.
The remote app uses homesharing, therefore anyone wanting to control an Apple TV with the remote app would need to know the home sharing ID and password.

Really confused here. I have somehow created both a managed account and an administrator account. The admin acct is now highlighted in system preferences. We are now blocked from using our computer because parental controls keeps popping up.

In attempting to add a music lesson program for my daughters band lessons we have messed up our computer. I now have both a managed account and an administrator account (both in my name). It is using the managed account now and not letting use the Internet because parental controls keep popping up. I would like to delete the managed account and get back to the admin account but I have no idea what my login is for the admin account. We have never had to use it before this problem started and what we thought it was when we set it up does not work. Any ideas?

If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content.

D20 using DVD on Marvell SAS controler

Similar Messages

Maybe you are looking for