D2K (Reports 3.0) installation in Win NT

During installation of D2k reports3 in Win NT i getting the follwoing error. pl advice me to resolve this problem.
Your current oracle home C:\ORANT is in OCSM client installation managed by your systems administrator you may not install or remove products in this home.

I have the same problem as well. Please EMail solution to me at: [email protected]

Similar Messages

Lenovo System Update creating problems in fresh installation of Win 7

I'm hoping I can get help from this forum...
I have a Thinkpad R61 7742-CTO that has its original XP Pro operating system in day-to-day use. It's time to finally update to Win 7 with XP due to sunset soon. (Although I think Win 7 is visually ugly compared to XP)
I removed my "production" XP disk drive and did a clean installation of Win 7 Pro on the original purchase ("test") disk, including the 140-some MS updates available as of yesterday. Everything runs fine, including using Windows Update to search for new important and optional updates. So far, so good. I next went to Lenovo's website and downloaded the current version of Lenovo's System Update. Again, no problems once that particular program was installed. I installed Lenovo optional updates also without encountering problems.
However, when I load the Lenovo important updates, which include Access Manager, Power Mgr, etc., various intel and other "enhancements", things go wrong. If I click on Windows Update, for example, I get a message that it is not running. If I then do the net start/net stop wuauserv routines I found when searching the exact error message, I get the error: System error 5 access denied. I get the same message for several similar admin routines, particularly those involving "net".
I have tried many of the supposed repairs, including MS Fix-Its, that appear in Google when I searched the error message. None has worked. (A couple Fixits I did manually and got the Access Denied messages again) So I've rolled back using the restore point just prior to downloading the Lenovo programs, and everthing resumes working as expected.
It seems that the Lenovo downloads are interfering with something, particularly my admin rights, in some way. There's only one user (me) and it has admin rights, no password & etc. Other odd things are Access Connections is running as is the basic Win 7 network app in the system tray. Perhaps the Lenovo apps are interfering with the similar Win apps rather than replacing them as intended?
Can anyone suggest an approach to solving my problem?
Thanks,
Greg

Hello and welcome,
It may be that TVSU is "updating" the AHCI driver (Intel Matrix Storage Manager or Rapid Storage Technology) to one that breaks Windows update.
You can try rolling back the driver to an earlier version or going to the Intel site and getting a later one.
http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-System-Update-blocks-Windows-Upda...
Z,
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

BO XI 3.1 Installation in Win 2008 R2. CMC & Infoview not opening

I did a BO XI 3.1 SP3 Installation on Win 2008 R2 machine. The Installation was successful. I could connect to the CMS from Client Components (Rich Client, UD, etc.,).
But CMC & Infoview are not opening... I mean the page shows blank without promoting for BO Login Credentials. I'm thinking the problem could be around Tomcat Configuration / something... The system doesnot have IIS. Tomcat version is 5.5.
Any help would be appreciated.
Thanks & Regards,
Madhu

hi there....
i am installing bo edge with data integrater xi3.1 sp3 on my windows server 2008 standard 32 bit edition. after installing, the application like infoview, designer all can work but my data services cannot work. Why is this happening? I already also disable the UAC control setting for the windows server 2008. The error says that "businessObject Data Services service manager has stop working." Log Name:      Application
Source:        Application Error
Date:          20/12/2010 1:48:11 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      WIN-DC9EBRXZAMW
Description:
Faulting application al_jobservice.exe, version 0.0.0.0, time stamp 0x4924d7fe, faulting module al_jobservice.exe, version 0.0.0.0, time stamp 0x4924d7fe, exception code 0xc0000005, fault offset 0x00017fde, process id 0xe14, application start time 0x01cba0097ca93ac6.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-20T05:48:11.000Z" />
    <EventRecordID>3572</EventRecordID>
    <Channel>Application</Channel>
    <Computer>WIN-DC9EBRXZAMW</Computer>
    <Security />
</System>
<EventData>
    <Data>al_jobservice.exe</Data>
    <Data>0.0.0.0</Data>
    <Data>4924d7fe</Data>
    <Data>al_jobservice.exe</Data>
    <Data>0.0.0.0</Data>
    <Data>4924d7fe</Data>
    <Data>c0000005</Data>
    <Data>00017fde</Data>
    <Data>e14</Data>
    <Data>01cba0097ca93ac6</Data>
</EventData>
</Event>
>anyone face this error before and how to solve this issue? Need help ASAP because need to configure it to customer.
Regards,
Teerin

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

SAP R/3 4.7 INSTALLATION ON WIN-2000 ADVANCED SERVER.

Hello!
IS THERE ANYONE WHO CAN HELP ME?????????
Dear, plz. Give me the steps for sap r/3 installation on win 2000 advanced server.
I am not having password for sap community market place.
So, iam not able to get the steps for installation I AM HAVING THE FOLLOWING CD'S
1) SAP 4.7 GUI
2) JAVA
3) SAP KERNEL
4) ORACLE 9.2.1- 3 CD'S
5) SAP EXPORT- 7 CD'S
Plz. Help me in this.plz.mail me on my ID- [email protected]
Thanks & regards,
Sandeep Chaudhary
m-09312406060
0129-3260483,4120483

how come you have the cds and no access to sapnet? strange....
basically these are the steps:
-> install win 2k server
-> check for all hardware and software requirements (needed for sap installation)
-> install oracle server 9.2 and the appropriate patchset (being 9.2.0.8 at the time) and the interim patches (opatch)
-> install sap central instance using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> install sap database instnace using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> apply post-installation steps
but: without the installation guide and the relevant sapnotes it will be difficult to succeed....get access to sapnet asap!
GreetZ, AH

AIA FP 11.1.1.7 installation on Win 7 64 bit.

Hi All,
i am facing a nagging installation issue while installing AIA FP 11.1.1.7 installation on Win 7 64 bit machine.
Problem statement-
The dreaded PremGen error while AIA installation.
Summary of what had been done-
1) DB installed successfully.
2) SOA Suite installed successfully.
3) Node manager working perfectly- basically able to start and stop both the admin and soa servers successfully.
4) Modified the mem args both in setSOAdomainEnv.cmd,setdomainEnv.cmd and also in the aia installer oraparam.ini to 2048 (Max heap)
5) Changed the session time to "EST" in the DB session.
kindly suggest if i have been missing out on something or is there any patch that i am required to install for this to go through successfully?
Regards
Pranav 11g

Did you try with 1024 for memory.

Issues With CS4 Installation on Win 8?

I purchased CS4 (Web Premium) on disc several years ago, and it has been working fine on my Win XP computer ever since. The Adobe software has all the current updates, though I am using the CS4 version of Acrobat Pro (9.xx) rather than a more recent (free) version of Reader.,
Unfortunately, my computer's hard drive has fried, and I just purchased a new Windows 8 machine, which will arrive shortly. I am trying to determine:
1. Are there any general issues with CS4 installation on Win 8 that I should know about in advance?
2. Are there specific procedures (de-activation?) that I need to follow BEFORE attempting the installation on the new computer?
3. Other than specific user issues, are there problems with CS4 versus Windows 8 that I would not encounter with Windows 7.
I enhance photos and create web sites for a living, so the CS4 installation is mission-critical. I am hoping I did not make a mistake in ordering a Win 8 machine...
Thanks for any and all insights.

OK, fair enough. Maybe someone who has actually experienced this situation (CS4 --> Win 8 machine) might see this and offer some tips to avoid hassles. But I will try the install as soon as I get the new machine and post any ensuing issues/problems here.
As for de-activation of the previous installation on the XP machine, that is now impossible, as the hard-drive is fried. Unless there is a way to de-activate an installation some other way (without actually opening the programs). That said, I AM able to access files on the fried harddrive, so if there is a specific file that controls de-activation, I could access it on the old machine. However, I may not be able to actually RUN said file on that machine, but can copy it to a stick and move it elsewhere. So, any thoughts on deactivation of an installation on a deceased computer?

MSCS cluster installation on win + sql server 2005

Dear Guru,
I want to installing MSCS cluster installation on win 2003 ENT.with sql server 2005 .
Choosing High availability (ABAP)
Please Guide me prerequisit & partation on local & shared disk.
Its Urgent.
Personal mail ID is [email protected]
Regards
Amol kulkarni
Message was edited by:
amol kulkarni

Hi,
You know what ?
Step by step installation is different in every company because each company has a different usage of SAP software.
It is precisly your job as a SAP sys admin, to study the problem, to solve it and to write the step by step documentation.
In my company, it took me one month and my documentation is 250 pages long.
You will not get someone else doing YOUR job instead of you.
The standard SAP documenation is perfectly enough to study your particular case...
Good luck !
Olivier

Oracle forms/reports 6i runtime installation files

I need oracle forms/reports 6i runtime installation files.
Please help me to download runtime installation exe files.
Thanks in advance.

Dear Friend,
It is difficult to deploy all forms/reports as well as run-time executable in one click, but very much possible.
You need to invoke the Developer Suite 6i installation atleast twice (One for Forms and Net files, another for Reports).
However, you could bundle your forms/reports files by placing them within DevSuite6i folder and mentioning their path in the inventory file.
If you want a full silent installation in a single click, Use a third party package compiler and invoke those two installation steps in silent mode
Regds,
Arun

D2k report query , want to develop in obiee 10g

Hi,
I have a d2k report query, the result what i am getting in d2k report can i get the same result in obiee 10g.
my query in d2k report auery is like :
select a.vndr#,b.vndr_name,a.cust_type_cd,c.cust_type_e_dsct,a.branch_cd,d.branch_e_name,(sum(nvl(a.sales_total_value,0))-sum(nvl(a.return_total_value,0))) net_sales_value,count(distinct(a.cust#)) cust_count
from cust_net_sales_tmp a,vendor b,cust_type_codes c,branches d where
a.vndr#=b.vndr# and
a.branch_cd=b.branch_cd and
a.cust_type_cd = c.cust_type_cd and
a.cust_type_cd between :f_ctype and :t_ctype
group by a.vndr#,b.vndr_name,a.cust_type_cd,c.cust_type_e_dscr,a.branch_cd,d.branch_e_name
order by a.vndr#,a.cust_type_cd,a.branch_cd
thank you.
please suggest..

Hi,
The presentation variable is being passed correctly, but still the date value is not persisiting.
I have two prompts, both having presentation variables passed into them;One of the prompt value is being persisted but the other one(here date) is not.
I am not able to justify this issue as the problem is very vague. I dont see any reason for this issue to come up.
Anyways I am still trying to figure out the problem.
Regards
Ankita

Converting Crystal reports to Oracle D2K reports or BI Publisher

Hi I have one requirement
I need to convert crystal reports to oracle D2k reports is there any tool which will make my work easier
any body who has work on it please suggest.
Thanks in advance
Edited by: Qwerty on Jul 9, 2010 12:44 PM

check this it may help
http://www.oracle.com/technetwork/middleware/bi-publisher/convert-to-bi-publisher-11g-1611815.pdf ( page 25 - 45 )
http://download.oracle.com/otndocs/xmlp/CrystaltoBIP.pdf

Reporting error during installation

Hi
I am in middle installing MBAM 2.5 and didn't selected reporting service during installation but at last I am getting error " The sql server reporting service URL that point to the MBAM reports is not valid"
My SQL is running in cluster on different machine and for compliance_Audit and recovery database I have given the SQL cluster IP.
I don't know how should I proceed to resolve this error. Please advise me.

You can also open the IIS manager and open up the console from there. You need to check the name of the MBAM web server into the binding of the MBAM websites. By default with MBAM 2.5/2.0 the binding gets created with the FQDN of the MBAM web server. And
you need to check the port used. So its better you open up IIS manager and browse the MBAM console from there.
Also in some cases you need to enable the directory browsing for the MBAM website if you are using MBAM 2.5 which you can again do it from the IIS manager.
Gaurav Ranjan

Photoshop element 8 opens a Crash report while exiting the application (win 7 64bit).

photoshop element 8 opens a Crash report while exiting the application (win 7 64bit). however the program itself is working as we can see the saved data and function it.
However no idea why it opens a crash report when the application exited properly. It's happening almost on 30 computers. re-install PS8 but still the same.
Appreciate your help

Yes please i cant find the source anywhere. I have tried in bunch of computer on all or win 7 64bit but couple of them opening the crash report. Having said that program is working with no issues. it just opens the window when i exit from the application
it happens only under EDIT not on Organise
I have tried uninstalled and re-installed still it doesnt work
Appreciate your help

Benötige nach neu installation von win 7 software download für photoshop 8

benötige nach neu installation von win 7 software download für photoshop 8

Hi there,
Download for Elements 8 is also available in the above link which Mylenium has provided. If you are unable to locate, then here is the page I have located it for you..:)
http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
Read the instructions very carefully before starting the download, else you will face an error..
Once you download the product, you can use the serial number to activate it into the full version. Please take a back-up of the media for future use.
Regards,
Jairaj

D2k report

Hi all,
I would like to know how a d2k report can be saved in excel format. I am working with oracle 8i.
lacchhii

This is not a Forms forum - this is a PL/SQL forum. Kindly post your problem here ->
Forms
And, marked this post as answered to close this thread here.
Regards.
Satyaki De.

D2K (Reports 3.0) installation in Win NT

Similar Messages

Maybe you are looking for