D30 not seeing KB during post from back panel

This is a really more of an annoyance than an issue but I've noticed the D30's we're setting up don't see the KB during post when it's connected to the back USB ports on the Mobo.  Front panel reads it fine. It's not connected to the USB 3.0 ports either (indeed it's on USB1 whichhas the KB logo). 
Unit will generate a KB error then attempt a PXE boot (which fails) at which point it will sense the correct drive and boot normally.  KB/mouse work fine once it's booted.  The cloned machine has the issue; the donor does not.  Identical BIOS version / settings.  I'm sure I'm missing something obvious; it's just perplexing since the front panel board works fine but the back panel doesn't - kinda counter intuitive.  Sure I could enable a BIOS setting to ignore the keyboard but what fun would that be?

What BIOS version are you using?
Are you using the (Lenovo) standard USB keyboard or something 3rd party?
Any chance it's a false failure on the the failing system?  Are you able to get into BIOS setup using F1 on the keyboard even though the system is logging a KB error?
Can't say I've seen this on any of our systems.  

Similar Messages

  • I had the Siri app before it was added to all iphones and when Apple added it mine quit working. I deleted mine from my phone but do not see how to get it back. any suggestions?

    I had the Siri app before it was added to all iphones and when Apple added it mine quit working. I deleted mine from my phone but do not see how to get it back. any suggestions?

    bjorth wrote:
    apparently I have just an iphone 4 not 4s, so thank you.
    It does seem rather odd that an app that was acquired thru itunes would quit working once it was incorporated into the device for all users. oh well it was probably free or $.99 when I downloaded it.
    I would think that they were just testing it to see how many people would use it.  But you might want to write a polite letter to Apple requesting a credit for the purchase price of the no longer supported app.  That seems to be the least they could for one of their 'alpha testers'.

  • I do not see the verification code from apple

    i do not see the verification code from apple when i go to my email.

    Check Junk and Spam mail folder.

  • I could not see Responsive Scaling on the properties panel ?

    I could not see Responsive Scaling on the properties panel ?

    Responsive scaling is available only when Stage is selected in Animate 3.0
    Select 'Stage' in the 'Elements' panel,you should see Responsive scaling option in the Properties panel

  • Ipad name is not showing in itune restore from back up menu

    After updating the ipad software, my itune can't see the ipad device name when i go to file > devices > restore from back up. However, in the edit > preferences > device preferences. i can see my ipad device name under Device Backups. How can i restore my ipad to the desired device name?  

    If you are not seeing your plugin under automation it means it wasn't loaded. There could be multiple reasons for it, from being unable to resolve in run-time all the required libraries to problems with the PIPL or with your own code  (exceptions on startup, for instance). Its hard for me to tell what your specific problem is, but as it work ok from your debugging environment, I would probably suspect the former - library dependencies (for Mac `otool` and `installnametool` are the keywords here).
    In general, I would recommend starting with a working Adobe sample automation plugin and then work your way step-by-step to add your code, external libraries etc. If things break at some step you don't have to chase the issue for too long

  • Iphoto not "seeing" most recent photos from my camera

    When I connect my camera to iphoto, it does not see the most recent 27 pictures. They are visible on my camera, but when prompted to import, iphoto only sees the previously imported photos and asks if I want to import duplicates. WTHeck?

    Launch Image Capture and see if it can recognize those photos and download them to a folder on the Desktop.
    What camera do you have and does it have a removable memory card?  If it does connect it to your Mac via a card reader (your iMac may have one in its side) and copy the photos from the card to a folder on the Desktop.  Once you have the photos there and can confirm that they can be read (user Preview to view them) put the memory card back in the camera and reformat it with the camera.  Take some test shots and try importing into iPhoto again.
    OT

  • Not seeing my metadata changes from Light Room 3 in PSE 8

    PSE 8 is on my Mac. 
    LR 3 is on my PC.
    I make changes to my image in LR 3 then choose "Save Metadata to File", then move the JPG to my Mac. 
    Go into PSE 8 and Browse using Bridge.  Bridge *does* show my changes.  If I open in RAW editor, changes there, too.
    But if I open the file in PSE 8, no changes are there. 
    I would much appreciate it if someone could help me out.  I cannot find anything via numerous google searches.
    thanks,
    billy

    Thank you for replying and offering to help.  It is much appreciated.  Let me clarify...
    3. It is a JPG file. 
    1&2... I made several changes to my file (crop, tones, lighting, etc.) while in LR.  Then, in LR, I chose "Save Metadata to File".  When I open the file in PSE 8, I do not see any of the LR changes that I made.  Instead I see the *original* file, with none of the changes that I made in LR. 
    However, when I use Bridge to browse the file, the thumbnail does, indeed, show the changes that I made in LR.  I can tell because of the crop and drastic color/tone changes I made. 
    Moreover, if I open in the RAW editor from Bridge, the RAW editor also displays all the changes I made in LR. 
    Only when I open it in PSE do I *not* see the changes that were made in LR, even though the metadata is obviously saved to the file given the two points above with Bridge and RAW editor.
    does this clarify?  Thanks again for offering to help.
    Billy

  • I recently purchased the iphone6 and since it was activated, I can not see any text messages from people with an iphone, on Verizon Messages.  Any advice?

    I recently purchased an iphone 6, and since it was activated on Sunday, I am unable to see any text messages from iphone users, on my Verizon Messages.  Any suggestions?

    Hi Erin,
    The reason I asked is I like using Verizon Messages and found out via a chat on your website that with iMessaging, you can't see those messages on Verizon Messages.  This phone is for a teen ager so I want to make sure all of the fun things about an iPhone are still intact if I turn off iMessage.  r do you know of an Apple product that works the same way as Verizon Messages?

  • Program Monitor - I'm not seeing whole clip when playing back

    I'm real worried!  Having spent days of my life importing video and editing it - and then trying to fix my problem of only seeing a part of the playing-back clip in the program monitor which led me onto your site.  I've spent hours looking at your posts (and indeed Adobe help pages) trying to solve this and clearly (I think!) my original sequence settings have been wrong.  Maybe I can come back to that because I'm really not sure how to set these correctly.  My initial question please, if I complete my editing and then export this file, will I still only see part of the clips in the final version, or will I see the whole of the original movie clip?
    Some information:
    - Windows 7
    - Premiere Pro CS4
    - Program Monitor setting is "Fit"
    - 16:9 aspect ratio
    - PAL (based in the UK)
    - Sony HD camcorder - SR12E
    - 1920 x 1080i HD
    Phew, hope that's enough information for you to 'kick start' me!
    Thank you.
    Regards, Doreen.

    Would you also be able to tell me if the Sequence Preset below is my correct preset for the future.  Thanks.
    - AVCHD
    - 1080i
    - AVCHD 1080i30 60i (Amamorphic)
    Oh, it's like a new language!
    Regards,
    Doreen.

  • Reports file did not get generated during upgrade from 12.1.1  to  12.1.3

    Hi,
    Following is my setup:
    Two node Rac database on Linux 5(64-bit)
    All apps services are on single node - Linux 5(32-bit)
    Database version -- 10.2.0.5
    Apps version -- 12.1.1
    To upgrade apps from 12.1.1  to  12.1.3 i applied following patches.
    a.Merged patch 9239090, 9239095 and applled the merge driver, during the patch application i got the following error:
    Copying files to destination ...
    Done copying files to destination.
    The following Oracle Reports objects did not generate successfully:
    ja reports/US JAINMCEN.rdf
    An error occurred while generating Oracle Reports files.
    Continue as if it were successful [No] :
    == I did 'Yes' and patch applied successfully then as a post step i Merged Patch 9817770, 9966055 and apply the merge driver.
    Now i wanted to regenerate that particular rdf file, but its not getting generated even with adadmin. Not sure will the rdf file causes issue later so i wanted to fix this.
    Please advice...
    Thanks,
    Tanveer Mohammed

    Hi;
    I did 'Yes' and patch applied successfully then as a post step i Merged Patch 9817770, 9966055 and apply the merge driver.
    Now i wanted to regenerate that particular rdf file, but its not getting generated even with adadmin. Not sure will the rdf file causes issue later so i wanted to fix this.I belive you regenarete rdf and u dont have any issue than you can ignore this error. If you dont generate rdf than i suggest regenarete and if you have any issue update thread please
    Regard
    Helios

  • IE could not see the web posted

    After posting, while using IE to open the web, it always missing picture or not fully launch.
    And Google AdSense from the iweb itself I receive not approve, details show below:
    Difficult site navigation
    Further detail:
    Difficult site navigation: While reviewing web.me.com/tan.william, we
    found that your site was down. Google ads may not be published on a site
    that is not fully launched, functioning, or easily navigable. Once your
    site is functioning and has enough content for our specialists to review,
    we will be happy to reconsider your application.
    Could you please advice how to solve the problem?

    One thing you can do to make your site more compatible with IE is to convert those photos with drop shadows to an simgle image file that contains the photo and drop shadow. See Old Toad's Tutorial #7 - Converting Photos w/Frames, Drop Shadows and/or Reflections into a Single JPG Image.
    More tips on how to make a site more IE compatible can be found at this page of Roddy's iWeb for Musicians site: How to get your iWeb Site to load in Internet Explorer.
    On your photo page not having frames around the photos will greatly speed up that page's loading. Each frame adds 4 addition files to the page to load. Also your Me photo page has most of the frame files missing. They have not been uploaded with the rest of the files. The same goes for the WIL’s place photo page.
    OT
    Message was edited by: Old Toad

  • Excise Duty not picking automatically during posting of GR Document

    Hi MM
    I have a problem related excise duty calulation. During the posting of GR document for excisable material, excise duty, cess & Edcess not picking automatically, users put manully all the duty along with base value.
    I done the all excersie relate exsie, like matain condition type, J1ID etc.
    Pls help me, it needful for me.

    pl check in p.o that setoff cond of duties are maintained or not ,in FV11 , this was the same issue i had after mainaining the set off then during MIGO all values were autom. appeared.
    pl reward
    ok
    sap11

  • Time capsule not seeing old backups, now its backing up my computer again

    Hi:
    I moved my TC today to a new apartment. Same computer and everything. I can mount the drive and see the macbook pro backup file but i cant connect to it with time machine. Now when I back up my computer again, it is starting a new backup of the entire system.
    would maybe reinstalling leopard and using the other pro backup work? let me know thanks!

    Well I called apple about this and they said i need to reinstall leopard from the latest backup.

  • Snow Leopard OS will not "see" older Leopard Time Machine back-ups

    I upgraded to OSX Snow Leopard from Leopard using a new hard drive (I wanted a bigger drive so it was actually a fresh install rather than an upgrade). OSX SL could see Time Machine back-ups from the Leopard system initially (before performing an OSX SL back-up). Now that the OSX TL back-up is completed, the previous Leopard back-ups cannot be seen by Time Machine. Any ideas on how/if I can get it to see them (as I could before I did a full back-up)?
    I can see them on the drive, but just can't get to them via Time Machine.
    Thanks!

    Hi, and welcome to the forums.
    Yes, Time Machine normally only shows you the backups for the Mac you're on.
    You need the +*Browse . . .+* option. See #17 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).

  • I deleted a Note and want to restore from back up.But if I sync it won't it just sync the deleted note?

    How do I restore a deleted note from my backup without syncing? Do i reset my phone so I can get the backedup note? If so, how?

    Did you back up recently before you deleted the files? If so, simply recover from iTunes backup files as the solution above. If this didn't work for you, you may try professional data recovery tool to recover them. Actually no matter the data lost has been backed up or not, they are marked as "deleted" by the device's internal database when deleted but still stored in the database. Good luck!
    CNET download link: http://software.bigbigsoft.com/iphone-recovery-mac

Maybe you are looking for