D300 s  AVI : Dateiimport fehlgeschlagen : Codec fehlt oder ist nicht verfügbar

Hallo,
hab Videos mit der D 300 s gemacht und wollte sie in Premiere Pro CS5 (keine Trailversion) am Mac laden ins Projektfenster.
Leider nur eine Fehlermeldung: Dateiimport fehlgeschlagen. Der Codec fehlt oder ist nicht verfügbar.
Obwohl ich schon vor ein paar Monaten einma sol eine D 300 S AVi am selben Rechner mit Premiere geschnitten habe.
Was ist los?
Hat der Codec sich aufgelöst?
Weiß jemand Hilfe?
Danke

Similar Messages

  • Das Update „Aktualisierung des Apple Software-Installationsprogramms" konnte nicht gesichert werden. Die digitale Signatur dieses Updates fehlt oder ist nicht korrekt. Dieses Update wurde möglicherweise verändert, nachdem es von Apple signiert wurde. Das

    Hallo, wenn ich mithilfe der Softwareaktualisierung aktualisieren will, erscheint nach dem runterladen folgende Fehlermeldung:
    Das Update „Aktualisierung des Apple Software-Installationsprogramms“ konnte nicht gesichert werden.
    Die digitale Signatur dieses Updates fehlt oder ist nicht korrekt. Dieses Update wurde möglicherweise verändert, nachdem es von Apple signiert wurde. Das Update wird bei der nächsten Softwareaktualisierung erneut geladen und geprüft.
    Was ist die Ursache dafür. Bitte nur in deutsch antworten.
    Gruß und Danke aus Adlershof

    Download the installer again from Apple.

  • HT1866 Ich kann Itunes oder Quicktime Update nicht einspielen. Das msi-File wird noch runter geladen. Dann behauptet Itunes jedoch dass die Netzwerkressource nicht verfügbar ist. Auch wenn man das gerade runter geladene msi-File sucht (und findet) geht es

    Kann jemand helfen?
    Alles in ITunes schein ordentlich zu funktionieren.
    Nur das Update geht nicht. Die Update msi-Datei wird korrekt geladen.
    Wenn die Datei gestartet werden soll funktioniert es nicht.
    Auch ein kompletter Download von Itunes und dann der versuch einer Neuinstallation führt zu dem gleichen Ergebnis.
    MfG

    I'd like to have a closer look at that error message please.
    Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
    Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

  • Problems importing AVI with DV codec to Premiere Pro

    Problems importing AVI with DV codec to Premiere Pro  (720x564 px, 32 kHz stereo, 24.4 bitrate)
    I can't import that video. What can I do?

    Svanur,
    I agree with Harm. The specs. do not match up correctly. Where did those AVI files come from?
    I assume that you are working in PAL-land (and not NTSC-land). Is that correct?
    What platform are you working on, Mac, or PC?
    When you attempt to Import those AVI files, what is the exact error message that you are getting?
    Good luck,
    Hunt

  • Seit Wochen kann ich mein iTunes nicht mehr nutzen. Eine deinstallation oder ein Update ist nicht möglich da immer die gleiche Frage auftaucht dass die Datei itunes.msi fehlt. Wie muss ich vorgehen?

    seit Wochen kann ich mein iTunes nicht mehr nutzen. Eine deinstallation oder ein Update ist nicht möglich da immer die gleiche Frage auftaucht wo befindet sich die Datei itunes.msi. Wie muss ich vorgehen?

    Eine deinstallation oder ein Update ist nicht möglich da immer die gleiche Frage auftaucht wo befindet sich die Datei itunes.msi.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • Hallo, ich habe ein MacBook weiß mc207D/A und brauche neues Netzteil und Adapter. Welchen muss ich nehmen? Kann ich auch die neueste Software draufladen oder ist es begrenzt?

    Hallo, ich habe ein MacBook weiß mc207D/A und brauche neues Netzteil und Adapter. Welchen muss ich nehmen? Kann ich auch die neueste Software draufladen oder ist es begrenzt?

    Hallo ..ich habe nun ein Kabel angeblich original mit Stecker bei Ebay für 9,99€ gekauft...drauf steht
    Designed in Apple California Model A 1300
    Original Apple Power Adapter A1300
    Input: 100-240V~50-60 Hz 0,15A
    Output: 5V---1A
    Da ich wusste das es nicht original ist ( Preis) habe ich mir nun eins für 21€ bei Amazon gekauft..lt. Amazon Original Apple.
    Komischer weise steht alles das gleich darauf wie bei dem Billigkabel...und bei IOS 7 wird mir immer gesagt das dies Kabel beide nicht Original sind.
    Was ist da los????

  • Funktioniert bei Muse Farbverlauf bei Schriften wie in InDesign oder ist das noch Zukunftsmusik?

    Funktioniert bei Muse Farbverlauf bei Schriften wie in InDesign oder ist das noch Zukunftsmusik?
    Dietmar!

    Farbverläufe in Schriften sind selbst in CSS 3 als experimentell gekennzeichnet und werden daher nicht unterstützt. Muse bietet nix an, was nicht zuverlässig in den verschiedensten Browsern funktioniert und selbst normale Farbverläufe funktionieren nicht in allen... Ja, es ist Zukunftsmusik, aber man kann ja ganz altmodisch ein Bild nehmen...
    Mylenium

  • Ich habe die Adobe Creative Cloud abonniert, einige Programme, wie z. B. Illustrator oder Acrobat sind aber nur in der Testversion verfügbar. Warum?

    Ich habe die Adobe Creative Cloud abonniert, einige Programme, wie z. B. Illustrator oder Acrobat sind aber nur in der Testversion verfügbar. Warum?

    Sign in, activation, or connection errors | CC, CS6, CS5.5
    Mylenium

  • Die Produktverteilerdatei konnte nicht überprüft werden. Möglicherweise ist sie beschädigt oder wurde nicht ordnungsgemäß signiert.

    Die Produktverteilerdatei konnte nicht überprüft werden. Möglicherweise ist sie beschädigt oder wurde nicht ordnungsgemäß signiert.

    When I want to buy the mountain lion Update in the app shop, i get the answer, them product management file is incorrect. So zhe download doesn't start. I have thre Macs and everywhere I get the same answer. The download of other apps from the app store works properly. My software platform is the newest version of OS/X Lion. Who can help me?

  • .avi files and codecs

    Hi I posted a question yesterday about .avi and there were some helpful responses. I installed GSpot and it tells me that the CODEC for the video file is MJPG/Motion JPEG, on an Olympus Pen EPL1 digital camera, and there is no CODEC required on the audio file. It then says that the MJPG CODEC is installed on my computer, so why when I import the file into Premiere Elements 9, it plays back in very poor quality?
    Regards

    Poor playback, when the proper CODEC is installed on one's system is often due to a mis-match between the Source Files, and the Project's Preset. The biggest killer of Quality, is when the Frame Size of the Project does not match the Frame Size of the Source Files, and Scaling is done, with Scale to Default Frame Size checked.
    The next most common cause of a lack in quality is the specific CODEC itself. For MJPEG, there are two highly popular CODEC's, Morgan and MainConcept. While there are others, those two are highly recommended by many users. Many cameras, that shoot in MJPEG will also ship with the mfgr's. version of the MJPEG CODEC. As that mfgr. might well have tweaked things a bit, if one does have a utility/driver disc, I would strongly recommend installing their version of MJPEG. This might be installed along wiith the driver for the camera, as part of an editing/organizing program, or maybe as a separate install. It will just depend on the camera, and might even vary, model to model. This ARTICLE will give more background, and also some potentially useful links.
    Let's go back to the first paragraph. When you ran your Source Files through G-Spot, what were the Frame Size and PAR (Pixel Aspect Ratio) listed?
    How do those figures match up with your Project Preset, chosen with New Project? A mis-match here can have a very negative effect on quality. If one has Scale to Default Frame Size checked, and the Source Footage is smaller, than the Project's Frame Size, the user will not see that the program has Scaled UP the Clip(s) to match. If Scale to Default Frame Size is unchecked, then the user would see black bars around all, or parts of the Frame, with the Clip displayed smaller in the Frame.
    While PrE can Scale footage UP, or DOWN, its algorithms are not the best and quality will suffer. A little bit of Scaling might go unnoticed, but if one had, say SD 720 x 480 material, in an HD 1920 x 1080 Project, then quality would go down dramatically.
    One thing to consider is that if there is a mis-match, there will be a red line over the Clip(s). This shows that for the best, smoothest playback, that footage needs to be Rendered. One would press Enter to Render that Timeline. The Render could be limited to just a segment of the Timeline by using the WAB (Work Area Bar). This produces proxy files, that will give the best possible playback. This ARTICLE will give more background on Rendering. While the Program Monitor in the program, on a high-rez computer monitor is not the best viewing situation for SD material (an NTSC, or PAL, calibrated CRT monitor is the best, but those are very expensive, and the NLE program needs to support them), one can get fairly close by adjusting the Magnification (Rt-click on the Program Monitor) to 100% from Fit. To see the entire Frame, it might be necessary to adjust the Program Monitor's Panel.
    As you can see, there are several things that can affect quality. If you will give us info on your Source Footage, your Project's Preset and also which version of the MJPEG CODEC, someone will be able to direct you.
    Good luck, and thanks for the info.
    Hunt

  • Uploading AVI files, need codec

    I have a Canon PowerShot camer and make videos using .avi.  I just bought the Premiere Elements 11.  Befoer I bought the program I made sure that it said it would work with .avi files.  When I try to upload an avi it says "This type of file is not supported, or the required codec is not installed".
    How do I obain and install the required codec? I have already loaded up all the software that came with the camer, and that software works fine; I assume it already has the required codec.  But how can I get Elements to use the codec?

    You will find best advice over on the video forum. Most of us here are photographers.
    Click on the link below and copy and paste your question again. Good luck.
    Video questions: Click here for Premiere Elements Forum

  • MJPEG AVI issues, gspot codec appliance lying to me?

    I have two types of videos. One is 1080p from my goggles, one is from my Canon point and shoot.
    Goggle 1080p .mov video: Premiere Elements 10 and Windows Movie Maker can import and edit, but gspot codec appliance says it is undetermined.
    Crummy Canon .avi MJPEG video: Everything can play it, Windows Movie Maker can edit it no problem, Elements 10 cannot import it, and gspot tells me it is an MJPEG and the codec is installed and fine.
    What the heck is going on??
    Do I need to export these MJPEGs from Windows Movie Maker and feed them into Elements 10? I can't afford to lose any video quality on those files...
    I r dissapoint.
    Help!
    Thanks,
    Brad

    I downloaded the trial and found the clips would not even load. Then I discovered that if I changed the clip extension from .mpg to .avi they loaded fine. I have been able to edit and apply transitions and effects with no problems. Accordingly, I purchased PrE 10.
    Both of Adobe's NLE (Non Linear Editor) programs look for common CODEC's, in common "wrappers," i.e. the file format, like MOV, MP4, AVI, MPEG, WMV, etc.. When one wraps a common CODEC in a wrapper, where the program expects something else, it can get very confused.
    This has been happening with some regularity, where some camera mfgrs. are choosing to wrap H.264 (common CODEC) in the AVI wrapper (un-common combo). To date, PrPro has addressed this CODEC/wrapper issue w/ a recent update. I anticipate that we might see similar with PrE 11, but do not kow that it will happen.
    When camera mfgrs. "stray off the ranch," it takes companies, like Adobe, some time to catch up. In the case of PrPro, there are historically updates during its 18 mos. +/- life cycle. As PrE is on a 12 mo. life span cycle, not so often, though there HAVE been updates, like with PrE 3.0, when Vista was released just after PrE 3.0 was, and caused many issues. Same with some issues with PrE 8. When that does happen, there are often little "goodies" added in, that might have been sitting on the shelf, waiting for the next big upgrade - though not always.
    As per another thread, we are seeing more and more still cameras, that shoot Video as 640 x 480 w/ PAR = 1.0 (square pixels), which is uncommon, by the general Video standards. However, as more mfgrs. do such things, Adobe will need to adapt, and at some point, adopt.
    Good luck,
    Hunt

  • Avi Little Endian codec

    I received some files in an .avi codec marked "Little Endian"
    My sequence always wants to render the footage no matter what compressor setting I choose in the sequence settings.
    Searched for a solution to this but I could not find one.
    Any suggestions?
    Thanks

    Thanks for the tip, however I am using FCP 4.5 and the "make multi-clip sequence" option is not available to me.
    The rendering only takes about 3 minutes for a 1hr clip.
    No matter which QT video compressor setting I use, I still have to render.
    The render time almost negligible, just wondering if there is a way to avoid it in 4.5
    Thanks!

  • AVI and DIVX codec

    I all,
    In my director movie i need to put a movie galery. One of
    them movie are in DivX conversion, so i need to be installed a divx
    codec in my PC. Are any way to include one xtra do this codec, to
    garatee that the video runs in all PCs?
    Greetings.
    Rodrigo

    Mike,
    You might want to take a look at the file closely, and then decide if you wish to edit it. Know, that if you go to DVD, or any compressed format/CODEC, after the edit, there will be another quality hit.
    There are CODEC's that are basically used to play a file, and then those that play, plus allow editing. DivX and Xvid, are in the former group. There could be some editors that will edit DivX, but I do not know of them. PrPro cannot effectively use the DivX CODEC to edit. Some have gotten very lucky, once the CODEC is installed, but usually one looses either the Video, or the Audio. In the cases, where it worked, OOS issues were almost always present.
    Good luck,
    Hunt

  • How to play an AVI with WMV3 codec ?

    when I try and play it（use VLC), just get the audio only.
    and then, this mesage comes up that says “main: no suitable decoder module for fourcc `WMV3'."
    I really wanna watch it , hope someone can tell me the way！thanks !

    well folks
    i had the same problem and the only solution i could find was flip4mac but when i installed it, the problem remained ...aaarghh!
    i have been through all the forums and message boards and the answer to the question wether or not wmv3 file are playable under mac os x is almost always NO!
    there are different suggestions on how to hack the problem, but the problem is that in most cases mac os x doesn't recognize the file for what it is!!
    i recently downloaded a wmv3 from the Net but mac os x kept telling me it was an mpeg file. vlc player, win mplayer, qt .... nobody could open it and i kept getting the old error message (-2048) or format not supported ..... and flip4mac didn't do it's job, man i was getting tired of this.
    so here's what you need
    - qt player latest version 7.0.4 (req. os x 10.3.9)
    - flip4mac latest version 2.0.2.10
    - vlc player (as a diagnostic tool)
    1. try opening your non-playable file in vlc player and get the errror message as usual
    2. click "open messages window" and have a look at the log. find a string in red that says "Main Error" in red and find your actual codec (in my case .WMV)
    3. close vlc - don't need it anymore
    4. open your video file with the Inspector (cmd + i) and got to the file name & extension
    5. change the extension to .wmv and confirm - close inspector window
    6. right click the video file and choose "open with" - you should find the option "wmv player there ....take it.
    7. qt should now open the file without hesitation and play normally
    8. find out that your movie is actually some home **** shot by the guy from across the street and decide that you don't actually need this f******* file
    so done on an iBook 14' with mac os x 10.3.9 - it goes to show that all computers are stupid even macs although they are not as stupid as pc's ...viva la mela!

Maybe you are looking for

  • Hp officejet scanner is not recognized after upgrading to snow leopard

    I tried calling HP twice and was disconnected both time before speaking to someone. The printer works, just the scanner will not work no matter what I do. Any ideas?

  • Appleworks 6.2.9 3D??

    Hi, I have Microsoft Office 2004 for Mac OS X and in it it has Wordart (I think thats the name) which allows you to select a 3D (or 2D) box and you can type whatever you wan't in it. Does Appleworks have that?

  • Setting paper size for multi-tab numbers file?

    i have a (currently) 3 tab spreadsheet that someone is working with me on. two of the tabs i print to 12 x 18 and one of the tabs i print to 8 x11. right now i have to open inspector, set paper size to 8 x 11, go to print view and slider-scale to app

  • How to append SAP instance in SAP MMC

    Hi, We had two instances running in one host. After a reboot one system is up and running and can be seen in MMC but the other instance niether starting nor appearing in MMC. Can any one tell me how to append the instance in MMC with the existing up

  • IMac G5 AirPort Issues - Very poor signal strength.

    Disclaimer: I am normally a PC user, but just bought a iMac G5 for my son's bedroom. Problem is that I am having a **** of a time getting the iMac to stay connected to my network long enough to download a newest OS update and in general, it is very s