D300 will not open as NEFS or DNG with CS2

hi,
using CS2 ( the only pshp activated on my MBP )
forgot to deactivate my home G5's.
purchased the D300
did not install its software NX or suite
did insert ACR 4.3.1 into adobe plug in
and also converted the NEF to dng
i still cannot open the files.
is it impossible to use CS2 with the D300? must i use CS3
or
what am i doing wrong?
must capture NX be installed
thanks

ACR 4.3.1 will NOT work with Photoshop CS2. The latest version that is available for Photoshop CS2 is ACR 3.7. There will not be any further updates. You need to to download and use the DNG converter, version 4.3.1. It will create DNG copies of your raw images that will open in Photoshop CS2 and ACR 3.7. Capture NX does not have to be installed to make this happen. You just need to use the most recent version of the DNG converter along with the correct version of ACR.

Similar Messages

Photoshop CC with CS3 will not open Nikon NEF files for the D610.[was:CC]

Photoshop CC with CS3 will not open Nikon NEF files for the D610. Is there a fix for this? Fast Eddy

I assume you're running Photoshop CC (not sure what you mean by "with CS3" unless that's the version you upgraded to CC from)
Download Camera Raw 8.3RC
http://labs.adobe.com/technologies/cameraraw8-3-cc/?tabID=details#tabTop

I have a new nikon D610. PS will not open the NEF files. it will not allow me to upgrade to ACR8.3R

I have a new camera - nikon D610
PS will not open the NEF files
PS tells me I have the latest version
ACR 8.3 will open the files but the system will not allow me to upgrade to ACR 8.3
What do I do?

anyone?

After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading.

After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading. I have no special software like numbers or anything else installed on either device. Just using the default viewer provided by apple for viewing email.

The attachment is an .xls excel 97-2003 spreadsheet. I viewed the file in the email and did not edit it with any software. I can forward the file to anyone that is may want to check it out to see if they can help me. I was wondering if there was some way of forcing another ios6 install on my phone and maybe that would solve it.
Is there anyone out there that is viewing .xls files in email using ios6 w/o any other software installed like numbers or any other add ons? I am not upgrading my ipad from ios5 to ios6 so I can still continue to view the emails on my ipad. Is there an email viewer .xls plug-in that will be availablle in the next ios6 update?

Adobe Reader will not open embedded PDFs in Safari with Yosemite

Adobe Reader will not open embedded PDFs in Safari with Yosemite installed

That looks like a perfectly good PDF, but since it's trying to open in Microsoft Word, that means your file association for .pdf files is incorrect. You should change it to point to Adobe Reader instead of Word.
If you are on Windows, see http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7

Purchased new camera nikon d7100 and camera raw will not open any nef files, talked to tech support and they assured me an update would fix issue, did update and have same issue still

I have photoshop cs5 and after purchasing a nikon d7100, photoshop will not open any of the nef files like it did with my nikon d90, I contacted support and they assured me after update that issue would be resolved...still not resolved, any suggestions?

Good day!
Please check this list to see which version of ACR supports the camera:
Camera Raw plug-in | Supported cameras
Then please check your version (Photoshop > About Plug-In > Camera Raw).
As you should see your version is not up to the task.
You can either buy a license for a more current version of Photoshop (CS6 is still available) or switch to the … Cloud License model or use the free DNG Converter.
Regards,
Pfaffenbichler

Photoshop CS4 will not open Nikon (NEF) raw files.

I recently tried CS6 Suite. Trial was over and I went back to Photoshop CS4. However, it would not open Nikon (NEF) raw files. I uninstalled and re-installed the PS CS4. This did not fix the problem. Can anyone help?
Thanks,
Derrick

NEF files from which Nikon camera?

My Itunes library will not open becuase of being created with a newer version

I did create the library with a newer version of itunes, i did this so that i could drag songs from a folder i had on this computer earlier. Now it will not open. I need help quick cause i would love to be able to drag these songs over s they will be on my iphone. HELP!

Let me get this right...
You have an iTunes library which you are now trying to use with a version prior to one that you were using, correct? Why?
Why don't you use the most up-to-date version of iTunes?
If you try using version 10.0 (for example), then anything iTunes has sorted out using 10.5 will not be recognised by 10.0, which is why you get the message. Apple's advice is to always use the most up-to-date version of iTunes.

Office 2011 will not open in OS 10.9 with main user -- works with new user. Suggestions??

Office 2011 will not open in Mavericks with main user -- works with new user. Suggestions??
I've tried removing Office 2011 completely and re-installing to no avail.

Unfortunately, my experience with Office is that somethoping will get corrupted in your account that prevents it from running. I have never figured out what exactly needs to be removed to make it work again.

DNG conversion fail and Photoshop will not open my NEF files (Newbie question)

Two part question. First, I just recently installed photoshop CS4 to my (windows vista) computer and I go to upload NEF photos to bridge and I check the box that says "Convert to DNG" and when it finishs uploading it says "Files successfully copied, However, DNG conversion failed." It says it everytime and I don't know what to do about that.
Second part: I try to open my NEF files in photoshop it says "Could not complete your request because it is not the right type of document." I am using a Nikon D90 and I don't know if that has anything to do with this. I apologize if this question is in the wrong forum, I am new to this and I thought maybe camera raw had something to do with this at least.
Thanks for any help

You need to update your Camera Raw plug-in to either version 5.2 or 5.3RC, as well as the new DNG converter. They are available on the Adobe download page, and there are complete instructions for installation available there.

IWork documents will not open in Preview or display with Quicklook

I have recently upgraded to OSX Mavericks and updated to the latest version of iWork (including the fresh installation of Numbers and Pages). However new iWork documents are not are not displaying in Finder with a preview thumbnail, or opening with either Quicklook or Preview. I only see the Pages, Keynote, and Numbers document icons.
The issue is isolated to new iWork documents, as iWork 09 documents still work, as well as most other standard file formats.
I have checked the Quicklook folder my Library, and have the latest 3.0 version of iWork.qlgenerator.
I have tried restarting Finder and Quicklook (in Terminal), as well as restarting the machine. However this has not solved the problem.
It’s not the end of the world, but it is inconvenient.
Has anyone else had this problem? Can anyone suggest a solution?
Thanks!

I don't have any Appleworks files but Numbers & Pages users manuals say they will import Appleworks 6 files. I can't say why yours will not if they are Appleworks 6 documents.
I also don't have MacLinkPlus but it might be doing one of two things: saving in a pre-'97 format of Excel or saving with non-standard header information in the file that Numbers does not understand.
I'm not being of much help so far. I've been looking all over and haven't found a solution for you. Sorry.

ATTN: APPLE ; iTunes will not open. Many customers/users with the same issu

First of all, I know I am not the first person to post about this nor will I be the last. However SOMETHING needs to be done about this ridiculous problem.
I was using iTunes 8.X prior and I upgraded to 9.0.1 a couple of days ago. Ever since then I have had nothing but headaches when attempting to get iTunes to work so I can work with my iPhone.
I followed previous instructions by other users on this forum. Here is the list of steps I took.
1. Uninstalling iTunes + Quicktime completely. Reinstalling shortly therafter.
2. Ensuring no codecs were interfering (mpcstar, et cetera).
3. Cleaning the registry.
4. Cleaning the SC Info.sidb and SC Info.sidd files from \ProgramData\Apple Computer\iTunes\SC Info
5. Turning off different services or restarting them. This includes Bonjour, Apple Mobile Devices, iPod Service. There IS an interesting note about this later on.
6. Running 9.0.1 on a fresh install of Vista Home Premium on a notebook.
+** No errors were ever given for this issue on either system inside of event viewer or when attempting to execute iTunes. The iTunes.exe will show as active in Processes at 13-15mb and does nothing. At times a smaller, and SECOND process of iTunes.exe will appear at 2-3mb then disappear after a few seconds.+
All of this and it goes nowhere good.
Generally, after rebooting my computers iTunes will start once if at all. However this is not guaranteed. The fact that I have to restart constantly in order to have a small attempt at getting iTunes to execute correctly is absurd.
I noted in 5. that messing around with the services produced one interesting event. When I stop the Apple Mobile Devices service iTunes will load. Although when doing this it will of course NOT detect my iPhone. Even if I load iTunes and start or restart Apple Mobile Devices it of course will not see it.
As aforementioned I am not the only customer and user to have this issue. There is clearly a problem with 9.0.1 and many others will agree. It might not be happening to everyone (lucky for you lot) however it is nonetheless unfair that we who are experiencing difficulties are not seeing a resolution.
If anyone has ideas about what else could potentially be done to remedy this I would greatly appreciate your help. As I am sure others will also.
Thank you for your time and help.
Message was edited by: aetheryte

You are not addressing Apple here.
You may leave feedback for Apple at:
http://www.apple.com/feedback

HT201340 OK! Now what do I do with my Aperture library from my old mac that will not open on my new Mac with a different operating system? do I just loose all of the pictures ?

I just bought a new Mac Book Pro and I had Aperture on the old one. Went to open it with the new OS and it says it wiil not open. How do I save my pictures and use them on the new computer?

Hello Pete from another old guy,
It sounds like you have an older iMac than the 2006 and newer model this forum covers. The problem is that, in 2006, Apple changed from PowerPC to Intel processors and third-party developers soon stopped making new software for the older processors. That's why you cannot upgrade Flash player--the current version requires a Mac the "2006 and later" processor.
However, not having a current version of FlashPlayer should not affect your ability to download. If you try downloading, do you get an error message or does something else happen?
Do you have another web browser like FireFox or Camino on your computer?
but would love to get my MAC back up to date and running right.
Well, "running right" may be doable but "up to date" may not be. You are already at as high a Mac OS level that a pre-2006 Mac can use. We need to pin down your variant to make recommendations. From your Apple menu at the left end of the menu bar, do "About this Mac":
That brings up this window:
Let us know what yours say for "processor." The two choices are "PowerPC" as in the example, or "Intel." If you have an Intel processor, you have more options available.
Awaiting your report,
Allan

Quicktime 10 will not open DVPAL AVI files even with QT7 Player!

I own a 2011 Mac Mini with OSX 10.6.7 on it. I have 2 Video files that are DVPAL encoded AVIs. THey are purely video, no embedded audio at all. Upon attempting to load them into Quicktime 10 - they would not import - I get the error message:
could not be opened. The movie is not in a format that QuickTime Player understands.
I click the more info, and since then I have downloaded and installed Perian versian 1.22 - xvid, divx, all the components I can find. One at a time, all at once, various ways, repaired disk permissions on all occasions and still it refused to open.
I then installed QT7 from the OSX disk. But this also refused to open the files. Interestingly enough, VLC media will play them, but Mpeg Stream Clip does not!
I've tried everything that ive read on the web, does anyone else have any ideas on how to get round this? I need it to work somehow, as I work with Pro Tools 9 and that needs quicktime to open and import video files!

I agree with your advice to wait for another update.
I see you also have cinepak issues (another string)
An important aside:
buried in the installer legalese (that we all tend to blow through) is a note that the MPEG2 plugin has been updated for 7.6. You get the updated plugin by going to the Apple Store, signing in, go to your account-- software purchases. There you will find the matching MPEG2 updater.
Message was edited by: Gregory Jones1 Strike throughs were showing --- WTH?

Macintosh HD will not open, stays on grey screen with spinning wheel

Recently things have been funny with my computer. Safari suddenly wouldn't fully open, but Explorer would. Often my computer would not go to sleep. Sometimes the mouse freezes on the screen after the computer has been idle for awhile. When the computer was opening it made a very quiet clicking noise. Sometimes the screen would go dark grey and up in the left hand corner there would be white typing talking about a "kernel". I have no idea what it meant.
I decided to try and reinstall Safari and use disk utility from my start-up disk (Tiger) to try and fix errors on my HD. The disk utility could not complete repair or verification. Here's the messages.
Verify Disk:
Invalid catalog record type
Error: The underlying task reported failure to exit
1 HFS volume checked
Volume need repair
Disk Repair:
Invalid catalog record type
Error: The underlying task reported failure to exit
1 volume could not be repaired because of an error
I've done numerous searches on the internet using my other hard drive (luckily I have two). I've tried everything I could find: Safe Boot; fsck; disk utility. Nothing could finish or work properly. I would like to be able to get back to my main HD and save pictures and documents that I really need. I can than erase and reinstall the operating system if needed.
Any suggestions?

Hi Silverc, welcome to the Apple Discussions! Great job describing some of your symptoms, they really help those who read the post in trying to understand and troubleshoot the issue without actually seeing the issue.
The symptom that stands out to me the most is the clicking sound you're able to hear from within the case (if I understand your description correctly). From my experience, a clicking sound can originate from a hard drive that is physically failing. It's good that you have a second HDD that you can boot the system from!
Does this problematic HDD show up on the desktop when you boot from your other drive?
Even if it does not, there's a good chance the system sees the hard drive on the IDE channel, which means you should be able to run a SMART test (SMART = Self-Monitoring Analysis and Reporting Technology) to see if that drive is failing. SMART technology is included with many HDDs and can help you determine if a drive believes it is physically healthy, failed, or predicting failure.
The third case (predicting failure) recently happened to me. From within Mac OS X, copying files to the drive suddenly became very slow. When I opened the case while the system was running and attempting a file copy operation to the problematic drive, I could hear the dreaded clicking sound. Upon running a SMART test, the results indicated a pending failure. After copying as much data as I valued from the drive (which, in its state took a very long time and is submit to integrity verifications), I shutdown the system and removed the drive.
Good news in terms of SMART testing is there are freeware tools available to perform the task, and the results are user-friendly (i.e. no need to understand the technical stuff of SMART).
The freeware tool that comes to my mind for checking the status of your problem drive (providing the system can see the again...though again, it might not show on your desktop even if OS X can see it) is SMARTReporter:
http://www.versiontracker.com/dyn/moreinfo/macosx/23232
Be sure to carefully read the documentation and explore the preferences. If your system has 2 internal hard drives installed, both should hopefully be possible to verify and report the results to you. Keep in mind that a failing drive can respond unpredictably and very slowly, so be patient when trying the program for the first time. Sometimes the system can appear to be frozen when it is not!
If you want a more complete disk utility solution, I always recommend DiskWarrior:
http://www.alsoft.com/diskwarrior/
This commerical-grade utility includes a bootable CD which can be used to run SMART checks (using the Hardware tab), check/repair/optimize disk directories, and even has some file recovery functionality. DiskWarrior was actually the program I used to run my SMART test.
Finally, if you can access the drive, or if the drive is visible to the system but does not show up on the desktop, there are some software packages available that can attempt to recover data from failed drives. From a similar issue I discussed in another thread, a much more experienced person recommended is DataRescue (which I haven't tried, but it does include very limited trial functionality to see if it will even work for you):
http://www.prosofteng.com/products/data_rescue.php
A lot of information here, read it carefully, take your time, and please reply with questions and let us know how you progress through the problem. Best of luck!

D300 will not open as NEFS or DNG with CS2

Similar Messages

Maybe you are looking for