D600 EA2700won't wireless connect my printers

Hi, newbie here. My old printer and a newly bought one both fail to connect wirelessly to my new router.
My network is Canadian, Rogers internet. Router a Linksys D600 EA2700, brand new, set up and seems to be operating properly.
Usual machines wirelessly connected are a MacBook Pro, iPad2, and iPhone 4. Visiting devices MacBook Air, and iPad 1. Also 2 iPhones 4. All connect ok.
The older Brother 7840W printer would not connect wirelessly. I tried all the options, from WPS (WPS button on the router, enter data into the printer's tiny screen) to search SSID, enter password. In between tries, i reset the printer as recommended, to clear settings. Every option failed to connect the printer.
We bought another laser printer, Brother 7860DW today. Set it up, tried to wireless connect. Failed. Tried every method, failed. Same as the other printer. we had though the network card on the old printer had failed, but now we're wondering.
The printers are 802.11g but the router says it supports a through n so they should be ok.
WPS was enabled on the router through smartlink.
I was able to connect the printer to the router with an ethernet cable, which made it available on the network.
What have I done wrong, anything? I followed the router setup instructions. I followed the printer instructions. I'm mystified as to what flag or switch I left on or off that makes the wireless connect fail.
Since the router was installed a couple of weeks ago, I have noticed a couple of other odd things that didn't happen with the old router.
1. When the Macbook is started up and Mac Mail opened, I have to authorise the Rogers internet connection. Never had to do that before, and it is every time I boot up the Macbook.
2. I have an Elgato Eyetv connected to the Macbook. Everytime I start the program, a msg appears asking if it's ok to accept eyetv connections. This didn't happen before either.
Is my new router paranoid and questioning everything I do?
thanks a bunch for any help. googling hasn't turned up anything to help.
tg

Thanks for the suggestion. We tried it and the printers still didn't connect.
We went through the router smatrwifi gui witha fine tooth comb but nothing stood out as a settign we should change.
We have solved it though, and the other problem of Eyetv video on the iPad 2. We bought a different router.
We'd only bought the Linksys router late last month, and the store took it back. After researching routers and finding a really good router review site, we bought another brand, and also went to D900. Bingo. The two wireless printers connected without a murmur, and Eyetv videos play seemlessly on the iPad2.
So I still don't really know if the problem was just the router capability/speed or something else weird.
Thanks for your help.
tj

Similar Messages

Connecting two printers wirelessly to Airport network?

Hi,
I currently have a working wireless network with the Linksys Wireless-B Broadband Router BEFW11S4 - which I believe is 802.11b - that connects 2-4 laptops at any point in time.
I just purchased the new Airport Extreme 54 mbp Base Station. I would like to
1. Set up the Airport network.
2. Put our two printers on the network and print wirelessly.
The printers are on are far away (1st floor) from the cable internet access point (2nd floor) so USB connection is not an option.
I have two questions:
1. Would it be better/simpler to purchase a print server to connect to my Airport network and make the two printers available for wireless printing?
2. Is it possible to connect ("bridge") the two wireless routers and then place one router close to the printers and connect via USB. If yes, should the configuration be Airport to Linksys or Linksys to Airport?
If there are any more simple/smart solutions than the options I came up with - they will be much appreciated. Thanks for reading this long question!
- amit
MacBook Pro Mac OS X (10.4.8)

Complex question that I don't think I can answer all of...
Airport Extreme Base Station - can connect only one USB printer - no hub permitted.
Print Servers (other than Extreme/Express) - work great for postscript printers, but are problematic with non-postscript printers. Printing to print servers uses "standard" protocols. In OS X, the "standard" protocols are provided by CUPS, so they need cups-capable drivers on OS X. Brother is the Only non-postscript printer manufacturer so far to provide CUPS drivers. Many non-postscript printers can be made to work with third-party drivers (Gimp-Print is one of these), but most people are unsatisfied with print quality (if you want to print photos for example).
I think wireless bridging will work with the Airport BS in the "receiving side" only -- but I haven't tried that.
For more help on the printers/network printing, need to know the printer models.
Hope this gets you started.

Canon Printers - Wireless Connection?

Many thanks for recent advice but still having probs (ie wireless connection does not work) as indeed I notice a fair few are.
The Manual refers to setting the WEP key to match the iMac's system now how can I access the iMac's WEP? Do I need to do something about the security settings?
Grateful for advice folks. Thanks.

Is that something you are being asked for in the operation panel on the printer? In my experience, when you setup Wi-Fi through the little screen on the printer, you select your Wi-Fi network and then enter the password.
In the Canon website, they have steps for the Canon Pixma MG3150, and it says to enter the Wi-Fi settings on the operational panel in step 2: http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctio nals/InkJet/PIXMA_MG_series/PIXMA_MG3150.aspx?faqtcmuri=tcm:13-813328&type=faq
There is also this article that relates to your version of the OS and your printer brand:
http://support.apple.com/kb/TS3575
The steps say to temporarily connect your printer so the drivers install, and when they are installed, you can disconnect the printer. The printer will still be added in the System Preferences>Print and Fax panel when you connect it using the USB port, but you will have to remove it by highlighting it and pressing the minus sign (when it is added by connecting the USB port, it is looking for a USB connected printer. We just want to connect it to have the drivers download).
Once those are installed and your printer is connected to your Wi-Fi network (by entering the settings in the operational screen), you should be able to then add it as a network printer by clicking the plus sign at the bottom left of the System Preferences>Print and Fax window.
I hope that helps!

After downloading Yosemite, my HP Photosmart D110 printer will no longer work. The wireless connection is fine but says it cannot find my printer when trying to print.

After downloading Yosemite my printer, a HP Photosmart D100 will no longer print. The wireless connection is fine, and a test page printed perfectly directly from my printer. When trying to print from my computer, it says it cannot connect or find the printer. I tried downloading the most updated software from HP website but it doesn't appear to be helping.

Try resetting the printing system.
OS X Mavericks: Reset the printing system
If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
Network Printer Troubleshooting
HP – Wireless Printing Center
HP – Printer Not Found During Wireless Installation

Deskjet 3050 J610a - Unexpected wireless connection problem.

Running:
MacOSX 10.7.4
HP Software: HP_Lion_Ink_SW_v12.13.17
Printer: Deskjet 3050 J610a had been working perfectly through wireless connection from a
MacBook5,1 Intel Core 2 Duo, while I had been using HP Software HP_Installer_DJF4100_v9.7.1, that was *not* meant for this printer, but I could 'ADD" the printer Deskjet 3050 via System Preferences, through HP Socket,
Looking [unwisely] for a more "functional" configuration, I looked up HP support and found that a specific software had been released for computers running "Lion".
So I uninstalled the previous DJF4100 software, restarted the computer, and installed the new software and drivers for Lion as indicated above.
Now the printer Deskjet 3050 J610a shows up in the computer's network under 'Devices" as
"HPJ610a.047DED", Network Type:Computer-to-Computer. It is also detected with "
Security:None", whereas my whole home Wi-Fi network is encrypted with WPA/WPA2 Personal.
I could of course regress to the previous software and configuration, but before doing that I would like to understand why this new software that has been released by HP for Mac computers running Lion is behaving in such a way, why the printer shows as a stand alone device (which it never did before).
As I said, before I regress to the previous configuration, using a software that originally is not the one required by the printer, neither by the computer's operating system, I welcome all information and suggestions.
I need that wireless connection!
Thanks in advance.
This question was solved.
View Solution.

Download and install this: http://support.apple.com/kb/DL907
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printer 'offline' when actually not on wireless connection laptop

I have an Officejet Pro L7590, connected via a wired connection to my Linksys router.
My laptop runs Windows 7 32-bit Home Premium and is wireless connected to my router.
When I double-click the printer in 'Devices and Printers'. It shows 'printer offline'
When I print a document it goes to the queue, but doesn't printer.
I have already tried the following:
. re-install the printer
. install the printer as local printer, with as port the IP address of the printer
. install the printer as networkprinter
. run the Diagnostic tools provided by HP
But still the same problem.
When I connect my laptop via a wired connection to my router (without changing anything to me printer settings) the printer is 'online' and works fine.
How can I make the printer work when my laptop has a wireless connection?

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

PhotoSmart 310a doesn't print using wireless connection

First... I have to say that if I had known what a HUGE pain in the butt this printer was I would never have bought it. On top of that, the thing apparently doesn't have an option to "hard wire" connect it to my computer... which the guy at the store didn't bother to point out. On top of that HP's customer service is, apparently, non-existent, as attempts to reach by phone are useless.
They can't even seem to get the model number on the machine where you can find it... so the instructions on "how to find your model number" are useless.
That said... here is my problem... which if I can't fix, I'm simply returning this and getting something else.
I have my printer all set up. Wireless is set up. ePrint is set up. Test pages print fine.
I have actually been successful printing with it ONE time.... so I know that it can do it.
It does give me a "low signal" message - however it seems to have no problem printing using the email option, or downloading from the web for the "reports." It scans and my laptop "sees" the scanned image, which is transmitted over the wireless network. If it is truly a low signal problem it seems like it would have issues with other functions regarding the internet.
BUT... when I send something from my laptop (MacBook OSX 10.5.8) to the printer it says...
.. connecting
.. idle
.. priinting (%)
.. then the print job disappears from the queue in the dialog box ... yet nothing actually prints out.
.. it then say's "Printer Ready" - I guess ready for another print job that it won't perform.
.. It does NOT give any kind of error code... say it's "paused" or anything like that. It's as if it THINKS it is printing... but it does not. It makes no sound like it's trying to print either. Paper is loaded in fine and it will print test pages with no problem and doesn't indicate any problems on those other than "low signal"
... When I use the "printer utility" to print a test page - also goes wireless - it prints just fine.
I've tried to use this printer only 4 times now for various jobs... and each time has been an ordeal lasting from 30 minutes to several hours. I've managed to get it to print on one occasion... though I can not remember how I did it.
It has NO problem printing from an email... so I guess I could just always do it that way... but it involves several extra steps to do so and I'm not even sure it would work for every type of print job I need.
It works fine scanning
It works fine photocoping
It works fine printing from ePrint (email)
It just DOES not print via the wireless connection
I don't understand how a company can make something this sophisticated and not have it give you an ERROR CODE when it fails to complete a function... and frankly, I'm fed up with this thing. It's a big, oversized, shiny paperweight and I've wasted way too much of my time trying to figure it out. This is one last ditch effort.
Can anyone help? THANKS so much if you can!
Sue

It is more likely a network problem, so please tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
In the mean time, you could try this quick trick; resetting the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Oh, and indeed this printer does have a USB port for connection directly to your computer. It does NOT have an Ethernet port for connection directly to your router.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet Pro 8100 Wireless Connectivity Issue

Hi, I've just purchased the HP Officejet Pro 8100 and have not been able to connect via wireless to the home network. I've tried connecting to 3 different routers and no success. Steps I took were as follows.
Steps:
1. Insert Driver CD
2. Install HP Driver Software
3. Follow on screen prompt for wireless connectivity
4. Was prompted to connect USB cord temporarily
5. Prompted to select SSID
6. Prompted to enter WPA Security Key
7. Screen saying your printer failed to join the following Wireless network.
8. Humored myself and read all the troubleshoots. No good.
9. Downloaded and Flashed new firmware to Printer. New Firmware installed. Still did not help.
*One thing to note: On the Failure to connect to Wireless network Error on Step #7 it says something about MAC address filtering and to enable the above MAC address. The funny thing is there is no MAC address supplied above. The field is blank. All that aside, MAC address is disabled in the first place anyway. Just wondering why the printer software doesn't know the printers own MAC address.
Attempted to setup printer on the following routers...
Router #1
Router: e4200
Local IP: 10.0.0.1
Subnet: 255.255.255.0
DHCP Range: 10.0.0.10 to 10.0.0.59
SSID: "Kosmos 2.4" and "Kosmos 5.0" 2.4ghz and 5ghz bands respectively
Channel Width: 20mhz or 40mhz
Wirless Mode: a/b/g/n
Security Mode: WPA or WPA2 Mixed Mode
Router #2
Router: EA4500
Similiar Setup as Router #1
Router #3
Router: 2wire 3801HGV
Local IP: 192.168.1.254
Subnet: 255.255.255.0
DHCP Range: 192.168.1.64 to 192.168.1.253
SSID: "u2" *Eliminated Spaces in SSID
Wirless Mode: b/g
Security Mode: WPA2
If anyone could shed some light that would be great. Otherwise I guess ill be returning it very soon.

Now you know why you were unable to connect.
Absolutely. It should be broadcasting its own SSID.
This link goes to a factory reset document for your printer.
is your printer still in warranty?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

C4580 All-In-One suddenly lost wireless connection and I can't get it back.

I have a replacement C4580 after HP replaced the old one because of their dmaned regionalisation of printers.
It has been working fine through my wireless router, and I have been able to use it wirelessly on 2 different laptops, one running XP and the other running Win 7. both have the printer showing as USB and wirless, normally being used wirelessly. THhe USB is there 'just in case' like now apparently.
It seems that my wireless printer has disappeared from my Printers and Faxes in the XP machine, so I try to add it again. Can't detect any printers, so when it asks to be connected via USB it appears to be going through the setup, then I get Error #201 VSA.
Googled for an answer but haven't found anything useful. Seen a couple which suggest that the router is hiding the SSID (it's not) or that MAC filtering is being used. Again, it's not.
I went to the Win7 machine, and it shows the wireless and USB printers (2 versions of the same thing) but when I attempt to print a test page tot the wireless version, it says that it has been sent, and I can see it in the printer queue, but after a while I get Error-Printing which in typical HP software is as usual bloody useless as it doesn't tell you why it failed, or where to even start looking to correct whatever error there was.
I have altered nothing on any of the computers (knowingly, anyway) and both laptops communicate quite happily with the outside world through the wirless router.
I really am getting rather pi**ed off with HP and their latest software. I had a PSC 1210 prior to this and no problems with it at all. The hardware seems fine but the latest software leaves a lot to be desired.
Any ideas anyone, on what has happened here, and how it can be fixed - or do I just cut my losses and buy another printer, this time anything but HP - unless they're all doing the same sort of stuff.
I have tried turning the wireless function off and then on on the printer, but also no difference.
Additional info. As suggested in another post somewhere, I have done both a Network Configuration and a Wireless Network Test printout. The test report shows PASS against both Wireless On and Wireless Working, and FAIL against Network Name (SSID) Found, but then shows the Network Name (SSID) correctly under Configuration Summary!
The configuration page shows Netwok Status as offline, and under 802.11 Wireless it gives a MAc address then Status as Disabled.
I don't really know what it is trying to tell me?
Oh, accidentally I printed 2 Configuration pages. On one it says that the 802.11 Status is Disabled and on the other it says that it is Disconnected. Unfortunately, I don't know which one was done first. The Disconnected one may have been done when I turned the wireless off. Nope, I just did again with Wireless turned on (at least the light is showing) and it still showing as Disconnected.

Hi there KR,
Sorry to hear the reset is not working for you on your PS C4580. The steps for the reset are all correct and should have worked if the printer is in good functioning order.
I would suggest calling in to HP directly to see what your options are with them.
If you decide to call them, this is their contact info:
If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet 6500A Plus will not maintain wireless connection reliably

For the HP EXPERTS on Expert Day, April 18, 2012:
B.L.A.T. (Bottom Line At Top): We have an HP Officejet 6500A Plus purchased about 5 months ago. We wanted to use it as a wireless-connected printer in another room besides our home office. It is useless to us because it will not maintain its wireless connection, even sitting just a few feet from the router in the same room. Except for numerous hours of troubleshooting, we have left it sitting powered up, but unused and idle, for almost the entire 5 months in our home office. DURING ALL THAT IDLE TIME, IT HAS LOGGED OVER 3,200 DISCONNECTS, at a consistent rate of 24 disconnects every 24 hours, even though it ALWAYS reports that the wireless signal quality is “EXCELLENT” (all this is according to the Wireless Network Test Reports we’ve printed throughout the last 5 months). So our question is, what is it that this printer is trying to do once an hour over a wireless connection that is causing these thousands of disconnects? And how can we stop it?
NOTE! Before you round up the usual suspects (namely our router and our PC firewalls) please note that we also bought an HP Officejet Pro 8600 Plus ON THE SAME DAY as the Officejet 6500A Plus. The 8600 was also installed with a wireless connection, and has worked without a single network issue for the entire 5 months.
NOW, FOR THE REST OF THE STORY…
WHO WE ARE: My wife and I have worked on HP equipment for 33 years, starting in 1979 as corporate customers of HP when we worked for Exxon; then we both worked for HP directly for 17 years; and we’ve now used dozens of pieces of HP equipment in our home during the last 12 years in retirement. We’re primarily software folks, so we’re not exactly experts in hardware and networking, but on the other hand, this ain’t our first rodeo either.
OUR CONFIGURATION:
PC’s – All running Windows 7 x64 with all important patches applied and Norton Internet Security 2012: HPE-270f and HP AIO 200-Quad, each with full 6500A and 8600A drivers installed on wireless connection. These 2 PC’s themselves can connect either wirelessly or via Ethernet to our home network. The 270f has a dual-band wireless board. Both bands work. We also have a new dv7t laptop with only the full 6500A driver installed via wireless connection. The laptop is now upstairs and it’s connected to our home network wirelessly without any issues. (This is where we had hoped to also put the 6500A, but it needs to work reliably via wireless connection.)
ROUTER: Netgear N600 WNDR3700 providing Ethernet and wireless networking. Router provides a very strong wireless signal throughout the house. No wireless problems with any other equipment including an iPod, two Kindle Fires besides all the HP equipment.
PRINTERS: Besides the two HP printers, the HPE-270f PC has a Canon MP960 installed on it. And if we can’t get the 6500A working right or replaced with something that does work right, we may be buying our second Canon printer. By the way, on the 6500A, ePrint and App’s are set to ON, but of course they’re not being used, just like everything else on this AIO.
OTHER: We also have a Sonos music system that connects to our network via Ethernet and has its own proprietary mesh network (on another frequency) for transmitting ripped music wirelessly to speaker units throughout our house. (If you aren’t familiar with this totally cool system, check out sonos.com). We’ve never seen any evidence of interference between these two wireless networks, or our wireless phone sets either.
HP TOOLS AVAILABLE ON ALL 3 PC’s: HPU
UPDATE 5.003.001.001 (reporting everything up-to-date); HPHDU 3.1.0.17; HPPDU 5.0.0.015 and HPNDU 4.3.0.002.
SYMPTOMS: The 6500A Plus installs quickly and easliy, and connects wirelessly just fine during installation. But sometime over the next hour (usually less), it disconnects and won’t print from PC applications. Sometimes the application puts up an “Unable to communicate with printer” screen, even though the PC usually thinks the printer is “ready”. Other times, the PC thinks the printer is offline (but printers don’t have “offline” buttons anymore!). Often, if you just leave everything alone, the 6500A will somehow reconnect and print out the spooled file 5-30 MINUTES later. So it does usually seem to be able to recover given some time, but that doesn’t always fit our schedule! Occasionally, turning the wireless radio on the printer off and back on will fix it right away. But usually, you have to power the printer completely off, and then back on. As far as we know, that always fixes it…..until the next disconnect a few minutes later!
PREVIOUSLY TRIED: After reading some of HP’s wireless network support websites, I manually assigned a fixed IP address to this printer. It didn’t seem to matter; according to the wireless network test report, it still logs disconnects at the rate of one per hour, and all the failure symptoms were the same.
We also dabbled a bit with setting this printer as “trusted” to the Firewall, but that didn’t seem to matter either.
Next, we connected the printer via Ethernet. The printer immediately started to work, even though it had just been in its “failed” state over the wireless connection. As far as we know, it never failed while connected via Ethernet. This seems to point to a purely wireless hardware/firmware problem on the printer itself.
Late last year, I tried two different chat sessions about this with the inter-continental AIO support teams, each one lasting several hours. Unfortunately, none of their optimistic solution scripts seemed to fit our problem. They both seemed determined to reconfigure the 6500A as a TCP/IP printer, which of course worked fine initially, just like everything else. At this point, they would understandably want to close the chat. But 20-30 minutes later, we could no longer print to it. During the second chat, they got into one of our PC’s remotely and effectively turned off the spooler (by selecting “Print Directly” or something like that). After that, all was well again (as usual) UNTIL the printer disconnected, at which time attempting to print from that PC would HANG the application (since the spooler was no longer buffering) and eventually hang the whole PC. One giant leap backwards. That’s when I gave up on the multi-hour chat sessions.
The three diagnostic utilities (HDU, PDU, NDU) have been tried over and over. When the printer is in its disconnected state, the DU’s usually don’t detect the 6500A at all, or if they do detect it, they are unable to fix anything. Frankly, it’s easier to just power the printer off (which takes about a minute) and power the printer back on (which takes more than a minute) and then wait for the spooler to kick in (usually about 30 seconds). BUT WE DON’T CONSIDER THAT A SOLUTION!!
B.L.A.B. (Bottom Line At Bottom): We have used up nearly the entire black ink cartridge and at least a ream of paper troubleshooting this brand new printer, to no avail. This printer is useless to us unless it can maintain a wireless connection reliably. Please help!
Thanks –
Bob and Jane
(Note: we have an appointment from about 11:20 am EDT – 1 pm EDT, 8:20 am PDT till about 10 am PDT)

I bought the Officejet 6500A Plus about one month and have experienced the very same problem. I tried to remedy this problem following suggestions in a number of different posts (static IP, router, firewalls etc), all to no avail. Last week I called support. The support I received by the tech over several hours and different days for a week was very good. However none of his suggestions corrected the connection issue. After today's recommended fix failed, he advised HP is aware of this issue with the 6500 and other affected printers. He claimed HP was working on a firmware upgrade. He did not know when the update would be provided. The tech also claimed HP acknowledged this problem in a written announcement. He agreed to email the announcement to me. I haven't received it. This has been the only problem I've had with the 6500

HP Photosmart Plus B209a is no longer printing through wireless connection. Appreciate any suggestions...

Hello. My HP Photosmart Plus B209a all in one printer stopped working through wireless connection yesterday. I have tried to delete the printer and reinstall using HP Setup Assistant, but when I attempt to configure the device for a wireless network, the HP Setup Assistant quits unexpectedly. I can succesfully set up the printer, but only for use with a USB cable. I noticed that there was an HP printer software update installed yesterday version 2.16.1. Could this have anything to do with it? I read something about airprint in the support discussions but I dont see the nearby printer option anywhere? I checked the list of compatible printers and mine is on there so I am not sure what I am missing here. I would hate to go out and buy a new printer. Any advice would be greatly appreciated. Thanks so much.

I have the same printer but my problem stems from installing a new router. I went through the exact same steps that you did and the HP Installer crashed on me 5 different times at the exact same spot. I called HP and got through to them and after 15 minutes he informed me that this particulart printer is no longer "supported" and software is not available. I told him that I downloaded the update that was available today. He was no help whatsoever. I also can print via USB but that is not at all what I want. The downside of this printer anyways is that it is not Airprint compatible. So, its either reinstall the old router or buy a new printer. This *****!

Wirelessly Connecting HP Laserjet P3015 to Airport Extreme Base Station

Hi, I just purchased a new Airport Extreme Base Station, and was able to establish an internet connection to it. I'd like to find out if it's possible to connect the HP Laserjet Enterprise P3015 to the Extreme, wirelessly rather than via a USB Cable. I've looked at the HP page for this printer, but I'm baffled by all the lingo. I believe it's a newer model of HP printer (or maybe it isn't?) but I bought it new from HP recently.
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=S upportFAQ&lang=en&cc=us&docIndexId=64178&taskId=101&prodTypeId=18972&prodSeriesI d=3815797&printver=true#10
Is there a term for the type of printer that can be wirelessly connected? Should the printer, by default, give off a signal that I can pick up? I don't see anything popping up in Airport Utility 6.3
I'm using OS10.7.5 by the way.
I'm off to post a message on the suitable HP forum (if I can find it ) but I'm so used to the Apple Community knowing what's what, that I was hoping that some kind soul here might just have experience with this.
Thank you.
PS. From what I can understand from the "Trouble-shooting FAQ," wireless printing is possible, but I just don't see an option for syncing it up with a MAC? Maybe it only works with Windows?

wuzradioman
I don't see where the P3015 printer is wifi capable. Therefor, you cannot use wifi to directly communicate with it.
Thanks for the reply Wuzradioman. I dug around (several) of HP's sites and it looks like the info was slightly different for the same printer listed on both the Home and Business sites. I did find a link on a 3rd HP page (which I've since misplaced!) that indicates that the P3015 requires a wireless card to be installed. But when I clicked the link for "accessories and additional hardware" a link to the card was nowhere to be found. I'll try to dig up that link in the event that some other poor soul has the same printer and a similar question.
Vernon Alexander
I find the HP printers (they're called wireless printers by the way) to be cumbersome to connect wirelessly. there's a lot of manual work involved that can be time-consuming. For example, I found it incredibly irritating to enter the wireless access passcode.
Thanks for the reply. After talking to some other people, this seems to be the consensus on wireless printing. I guess there's a reason, esp. in enterprise environments, that printers are often hard-wired.
Bob Timmons
you can run an Ethernet cable over a much longer distance than a USB cable, so Ethernet might be the best option, and the one I would prefer.
As far as wireless, If you connected an AirPort Express to the printer and disguised it near the printer, then you could locate the printer anywhere you want and have it connect using wireless to the network.
Instead of installing a wireless "card" inside the printer, you use an outboard device to accomplish the same task.
Thanks Bob. I did end up hooking up via a Cat-5e cable from printer to Airport Extreme base. Previously, I had the printer hooked up via USB cable (at a shorter distance) to my Airport Express, which the Extreme now replaces.
Unfortunately, I can't seem to get the HP Laserjet P3015n printer recognized after having connected it via Cat5e cable to the Airport Extreme. 1) there's still somethign about it being attached to the old Airport Express (which is now used to extend my network. 2) The P3015 is identified as a P3010 - which is a carry-over from when I had originally set up the printer on my (then) main base station which was the Airport Express. I didn't (or rather "stopped") questioning the fact that the P3015 was recognized as a P3010 just because it was the only way I could get the printer to be recognized at the time.\\
But I suppose this new challenge merits a separate thread, which I'll start after I do a search of the support forums. Maybe there's something obvious I'm not doing to get the printer sorted out.

HP laserjet P1100 wireless connection for mac

Hoping for a quick response.... I have a Mac with 10.8.5 and I have purchased an HP Laserjet P1100 wireless printer. I have tried installing the drivers to print wireless...ly with no success. I have taken time out to type this message because I have not been able to find someone who has had the same issue in the internet. I need a walk thru because there are many steps where the issue may be occuring. Your written installation documentation conflicts with your User Guide PDF file. Cord or no cord during driver installation for wireless connection??? Was lost after #5 page 18 on the User Guide PDF file.
I figured it out. Your directions are misleading and not up to date. Cord is not an issue but needed for entire install process. At one point I'm in my system prefs then I'm on my web browser where I found Bonjour which added the network to my printer choices so now I can print wirelessly... hopefully I don't have to do that again because I'm not sure of the steps I took. Fairly complex set up.

Hey @matt4,
Welcome to the HP Support Forums!
I see that you have a Mac OS X 10.8.5 and a new HP Laserjet P1100 series printer and are looking for quick and easy wireless configuration steps. I just have one question for you:
Do you have a P1100 or a P1102w?
What's my Model Number?
I'm going to assume that you have a Laserjet P1102w. The steps for wireless configuration of a Laserjet P1102w are a bit confusing on Mac OS X 10.8 as you need to use the generic Apple Airprint driver because there is no 'Full Feature Software and Driver' installation for that Operating System. In saying that, I will try my best to give you easy steps to reference should you need to configure your printer again on the wireless network.
How to Connect the Printer to the Network:
Step 1: Install the Generic Mac Printer Driver:
1. Turn your printer on
2. Plug your USB cable from the printer directly into your Mac
3. Click on the Apple menu, and then click System Preferences
4. Click Print & Scan and make sure your printer is in the list of available devices.
5. If your printer is not listed, click the plus () sign at the bottom left pane, click the name of your USB printer, and then click Add.
Step 2: Connect the Printer to the Wireless Network:
I've added the video above so you can view these step-by-step instructions.
Click the Apple icon (), and then click System Preferences.
Click Print & Scan.
Click Open Print Queue, and then click Printer Setup.
Click the Utility tab, and then click Open Printer Utility.
Click HTMLConfig.
Click the Networking tab, and then click Wireless from the list on the left.
Under Communication Mode, click Infrastructure, select your network SSID from the Available Network Names (SSID) list, and then click the << button.
From the Security Mode pop-up menu under Authentication, click WEP or WPA/WPA2. Your selection depends on the wireless security protocol your network uses.
Note: If your network does not have wireless security, leave the Security Mode set to Open System (No Authentication).
Type your WEP/WPA/WPA2 key in the appropriate field, and then click Apply.
In the confirmation box, click OK, and then close the HTML Config and Print Queue windows.
Step 3: Delete the USB connected printer, and then add the wireless connected printer:
In the Print & Scan window under Printers, click your printer name, and then click the Minus sign () to remove it.
NOTE: This removes the USB connection from the list so that the only entry for your printer is the wireless connection.
Disconnect the USB cable from the printer and the computer.
Under Printers, click the Plus sign ().
Select your printer name with Bonjour as the Kind, and then click Add
Once your printer is configured for Bonjour, if you have other Mac OS X computers that you want to use with this network printer you do not have to run all these steps again. You simply make sure that the other Mac computers are all connected to the same network that you have set your printer up on and just open Print & Scan. Under Printers click the () plus sign and select your printer name with Bonjour as the Kind, and then click Add.
You can reference all of this information in: Setting Up the Printer for a Wireless Network for the HP LaserJet Pro P1102w Printer
Let me know if these steps help clear up any confusion for you. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Officejet Pro 8500 a910 wireless connectivity issues?

I have a HP Officejet Pro 8500 a910 and It was working fine. I got a new router and it was still working fine. Second night of having everything set up it stops working and shows as offline on my computer. It will print information about the printer from thecomputor but will not print out any other documents.

I'm having the same issues. In my case, first I updated my MacBook Pro to OS X 10 Mavericks. A few days ago, the Actiontec gateway router provided by my ISP Frontier Communications ceased to function. Frontier sent a Netgear 7550 gateway router to replace it. I installed it according to directions. My email capability and home network went down. Frontier helped to restore the email but the techs I worked with couldn't figure out what to do to restore my wireless network. The router's setup would not allow me to replace the WPA Shared Key with the wireless network password I used previously. So, I updated the ASUS range extender and all the wireless devices that were on my home network with the new WPA key. Both printers, the Officejet Pro 8500A 910 and a Brother wireless laser, will not network. The Officejet blue wireless icon no longer lights up. I uninstalled the Officejet's software and then downloaded and installed the latest software and drivers for the Officejet Pro 8500A 910. The HP Network Configuration printout indicates that its network status is ready and the active connection type is wireless. I had it connected to my Mac with a USB cable so I could reinstall the software and drivers. When I disconnected the cable, I lost connection to the Officejet and couldn't print. the HP utility could not establish a wireless connection even though I did input all the new router settings. The Officejet thinks it's wireless but it isn't. I can only conclude that my Officjet is delusional. It's not all that old, but could it be ready for the all-in-one graveyard?

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

D600 EA2700won't wireless connect my printers

Similar Messages

Maybe you are looking for