D610 still doesn't tether in LR 5.7
Still failing with no camera being detected using LR5.7 on MacOS Yosemite.
Does Adobe even test these things?
iPhoto and ImageCapture both detect the D610.
That's not an answer, that's a snarky comment.
But nice try, Adobe PR.
It doesn't work. It doesn't work on Windows, it doesn't work on Mac. It doesn't tether to a D610 that has the ONLY firmware installed on it on either platform on any version of LR up to 5.7. I'd be happy to send you video of me plugging it in and it not working.
If there is something that needs to be done to make it work, or even something to TRY, I'd be happy to. But just telling me "you're wrong. it works" is not terribly helpful.
Fortunately, the good people at http://kuvacode.com/ have a product called SmartShooter that works just perfectly.
I noticed that several of the other "best of" tethered products are being honest and admitting they can't tether to the D610, when they claim to be compatible with Nikon models before and after the D610. Clearly the D610 has something funky that SmartShooter has figured out, but Adobe and others haven't.
Frank
Similar Messages
-
Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)
Hey lozza567,
Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Issues with sending and receiving MMS
You will need these to send and receive MMS:
- An iPhone 3G or later.
- iOS 3.1 or later.
- A cellular data connection. MMS isn't available if you are using only Wi-Fi.
- A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
- A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
To resolve issues with sending and receiving MMS, follow these steps first
1. Go to Settings and turn airplane mode off.
2. Go to Settings > Messages and turn MMS Messaging on.
3. Go to Settings > Cellular and turn Cellular Data on.
4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
9. Restart your iPhone.
10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
11. Reseat your SIM card.
If you are still unable to send or receive MMS, follow these steps
1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
7. Back up and restore your iPhone as new.
8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
Thanks,
Matt M. -
I have Lightroom 4 and a new 70D camera and when I try to important my photos Lightroom says it doesn't recognize my CR2 files. Can someone help? I have downloaded 8.3 from Adobe, but still doesn't work?
Lightroom doesn't use the Camera Raw plug-in. All of the Camera Raw technology is part of the Lightroom program. You will either have to upgrade to Lightroom 5 or use the DNG converter to create digital negative copies that can be used with Lightroom 4.
-
Windows 8 - hyperlink doesn't work how do I fix? Already tried to PDF/A Never, still doesn't work.Collaboration & Commenting
What country are you in? Is YouTube legal there?
-
Every time I ask Siri to find something near me, she says that she cannot find my location because I need to turn on location services in the settings menu and in siri. These are both on, and after rebooting my phone it still doesn't work correctly. How do I fix this?
No, the app does not have to completely restart. It gets shifted in its open state into storage. Similar to how a computer uses the hard disk when it has insufficient memory.
What complicates things is that sometimes memory does not get returned for reuse when you close an app. Thus yo should periodically double click the Home button and "delete" unnecessary apps from the multitasking dock and power off and then back on the iPod. -
Since I installed ios 6.1 in my iPhone 4, I can't sync it with iTunes. Can annyone help me? I have already reinstalled iTunes and reseted the iPhone, but it still doesn't sync. Thank you.
Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
The option to reset my security information tab is not available for me, I have a rescue email address in place and it still doesn't show up. Please help!
You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
(96335) -
I can't seem to update my software, every time I do it says that there is a problem and to close everything that is open. Once I close everything it still doesn't work. How do I get it to complete?
Make sure there's enough free space on the startup disk to install software updates...
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac Guides -
Why has Zuma Blitz and other games stopped working? I have downloaded and installed flash player but it still doesn't work.
IE uses a different version of Flash than other browsers use.
1.Download the Flash setup file from here: <br />
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
Save it to your Desktop.<br />
2. Close Firefox using File > Exit <br />
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
{XP: Ctrl+Alt+Del = Processes tab}
3. Then run the Flash setup file from your Desktop. -
I've been having this problem for a while now and I can't seem to fix it. Any time I log into any page, Firefox says not responding and I have to restart it. I have to run all of firefox in safe mode if I log out of my email or facebook. I've tried resetting FF and it still doesn't work.
''' "I have to run all of firefox in safe mode if I log out of my email or facebook. " '''
Please explain what you mean by '''all of firefox'''. You're either running in the Firefox SafeMode or you're not. There's no "all" or partial SafeMode.
Please see this: https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode -
I changed the name of my apple id and now I can't use the app store on my phone correctly because it's using my apple id's old name. I signed out and in on itunes and synced my iphone. Still doesn't work. Help please?
Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
Note: Apps are forever tied to the Apple ID used to originally obtain them. They cannot be updated using any other Apple ID other than the one they were originally obtained with. -
iMac 24" iMac (iMac7,1), Intel Core 2 Duo 2,8 GHz Ram 4 MB running OS 10.6.8: impossible upgrade to Mac OSX Mavericks. Already created second account, according to apple online support, but still doesn't work. Thanks for help.
Your Mac is definitely one of the supported models? http://www.apple.com/uk/osx/specs/
If so, what happens when you try to download? Is it a case of nothing happens? If so, take a look at the suggestions under 'Stalled Download' in this link:
http://www.wired.com/gadgetlab/2013/10/mavericks-issues-and-fixes/#slideid-23477 1
Also, some usrs have found that logging out of the Mac App Store and then back in again and starting over has kick-started the download. It seems that the 5+gb download can take a long time to give any feedback as to what's happening. -
I am trying to sign in to attend a session and it says 'Invalid user or password. Please try again.' I have reset my password and it still doesn't work. I created a new AdobeID and it still doesn't work. I need to attend this training. How can I get in?
Sorry to hear about this problem. What site are you trying to log in on? Is it a Mozilla site? Usually you don't need to register or sign in to a Mozilla site to use Firefox. Usually you can just go straight to where you want to go.
-
When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?
Try:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
my new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.
If your computer doesn't see the phone when you plug it in, you may have to take it to an Apple Store.
Maybe you are looking for
-
Table Relationship Between AP Down Payment And AP Invoice
Hello Experts, I would like to know how an A/P Invoice table and A/P Down Payment table are linked each other. For example, when you click the button "Total Down Payment" in the A/P Invoice screen, the list of down payments is shown. How does SBO sea
-
how do i email my i cal....to people..
-
I am trying to view my mac on my tv. I have it hooked up correctly but it won't let me view Safari. Any advice...
-
Hello, I am trying to build a chart using web services. I have a function like this private function dataRequestResultHandler(event:ResultEvent):void { myData = event.result as String; myXMLData = new XML(myData); In the dataProvider I am calling lik
-
My brand new 5c randomly locks up. It doesn't matter if I am on the internet, loading an app, or changing pages.