D70 manual settings with studio flash

I have a D70 and wish to use it with Bowen flash units with a remote wireless trigger. This is not the problem as I have two triggers both of which work fine. The problem is with the camera, I only ever use manual settings and keep losing the LCD display as I focus with the trigger attached. The image holds if the flash is open, but that is no good to me. Does anybody please know how I can hold the LCD display in the studio using manual settings.

That's correct. All that's being done is pretty basic symbol animation. Tweens, eases, a lot of symbols within symbols for easy switching of parts. What confuses me most is that it opens fine in CS5.5. What features might CS6 have/not have to completely break the file?
I also attempted to re-save the file in CS5.5 and then try opening it in CS6. This killed the program. Didn't even get as far as exporting a swf. All of my tools disappeared, all assets were corrupted, and the program just went on an endless loop of thinking and freezing.

Similar Messages

Help with Installing flash error- metafile cannot be loaded

I read the forum on this but it ended last year and there was no response to some recent questions on this and the direct email to the Adobe rep. on there got no response.
I am having this problem with installing Flash- it gets about 30% of the way and then a message comes up that says the metafile cannot be loaded.
I am running 10.7.5 on Mac, all browser software is current. I use both Safari and Chrome. After it said Flash was out of date I tried to update but got the metafile error. So I uninstalled Flash to install it fresh but the same error came up. I tried everything recommended from the forum. I also did all the steps from the help list direct from Adobe ( deleting Flash files, folders, rebooting, etc.) The offline link Adobe provides says the "file cannot be found" so I can't download that either. So I tried the online link download, but even after doing all the steps in order etc. I still get the error when I try to install it.
I have no firewall and have no virus software running. I also tried the direct offline links that others have provided from 2013, (unfortunately they are old) in both clicking on them and also downloading by right click but they are dead links and even the download for it has no content.
Any help that is more recent than last year? If this is in the wrong place, apologies. New to the forum.

I tried all solutions but one posted in adobe support. I am local administrator but IE security settings are set by group policies and buttons in tools security setting are grayed out.
After three days with "The ActiveX control for Flash Player could not be registered" message I tried registering the activeX control manually.
Bingo! that made the trick.
So open a DOS window, type "regsvr32.exe C:\WINDOWS\system32\Macromed\Flash\Flash10d.ocx" -first check if this directory exists and contains the Flash10d.ocx (no quotes needed) and you should receive a confirmation that it registered correctly.
I must say that I've tried so many ways that I cannot repeat the correct order before this has worked ;-(
Hope it works for you all

Microphone not working with Adobe Flash Player

The microphone in my desktop pc works fine with kde and skype but not with Adobe Flash Player.
The Microphone settings tab in the Flash Player detects a "Linux Microphone" and I can here my voice coming from the speakers but the Flash Player sound meter bar shows nothing.
Any ideas where/what to look for?
Thanks

marymba wrote:
i have the exact same problem. however, i only ever use firefox and i'm a complete novice when it comes to computers. can you explain the solution step by step? literally, pretend you're talking to a five-year-old because that's basically my skill level.
Welcome to Discussions, marymba
For your skill level, re-read the User Guide manual that came with your Mac and then use your Mac's "Help" to searches for basic info about any words you do not understand from my suggestions.
If you need more help, spend some time studying subjects of interest from the link below:
Click link-> http://www.apple.com/support/mac101/ <-Click link
Mac 101 offers new users a great basic primer on using and troubleshooting your Mac.
If the above do not give you the level of detailed information you need, you need more training than I could write here. If you do not have a Mac friend who can help you, your nearest computer store can help you find low or no-cost help sources such as: a local Mac Users' Group, Adult Education courses, or perhaps even a computer club in your area. You can also find help in books or magazines dedicated to using Macs. Many are available from bookstores as well as from the on-line Apple Store at this link:
http://store.apple.com/us/browse/home/shopmac/macaccessories/books
If all else fails, contact your nearest Apple Store for info "onetoone" training described in this link:
http://www.apple.com/retail/onetoone/
For Apple Store locations, see: http://www.apple.com/retail/storelist/
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.3) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.3)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Reset my airport extreme to factory settings, now getting flashing amber. Airport utility cannot see the unit when it scans. How do I access the unit?

Reset my airport extreme to factory settings, now getting flashing amber light. Airport utility scan does not see the device, so I cannot access any setup.
How do I make contact with the unit?

I found another thread from the June 3rd with the same issue. They seam to have a solution, but I am using windows. Does anyone know how to update older AXs on windows computers?

Problems with Adobe Flash Professional CC (CS6 too) to save animated .gif file or perfect .swf file

Hello,
I have a problem with Adobe Flash Professional CC and CS6 to save animated .gif file. Here is very simple work with logo. But I can't save a perfect file swf or gif and it's so bad news for me. Logo .swf file save with bugs. Bugs just see then file insert in freeshop page. Here is just example test page, it let you see logo bugs - http://tagraseshop.graphicsrim.eu . Here is real page, but it's not my, it's freeshop with old logo and I have corect it - http://www.tagras.lt
Animated .gif file absoluted not saved in Flash CC. Just gif picture. And why? My os Windows 8.1 . Indeed I try to save on Adobe Flash Professional CS6. It's not save too...
Gif "animated" - https://mega.co.nz/#!D8pEVaRR!Gjg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT LK4
Swf with bugs - https://mega.co.nz/#!jo5lSRyS!1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ
Fla - flash document - https://mega.co.nz/#!C94nCDSS!7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA
Perfect animation speed is here - http://e-shoptagras.graphicsrim.eu
Who can help to me?
Any ideas?
Thanks for your help in advance!

Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
I need help! Please!

TAX condtion is manual and with Cal type is 'B' fixed amt

Hello Team,
I am new to SCN, Need Help on below issue,
Requirement : In my Client Process, Only Tax value (manually condition maintained) need to settle to the customer It is like a Credit memo and Debit memo Process. (NO delivery and PGI).
Reason : some times User entering wrong (Mostly Client is using manual conditions in pricing procedure becoz it is integrated with AFS) Tax values and processing, for this we need to develop a new OTC cycle to settle only TAX amount/value to the customer by calling BApi which are the values entered wrongly and processed by the user.
for this created one Pricing condition and placed in pricing procedure and maintained condition record with only 0.01 INR (here Client approved to maintained min net value so i maintained 0.01 INR.)
created TAX condition type maintained manual condition with required fields in pricing procedure.
maintained VKOA settings for both condition types.
maintained tax code and TAX procedure determinations with the help of FICO team
creating SO it is working fine, when trying to post the values in to accounts giving errors "TAX CODE PROCEDURE TAXINJ IS INVALID"
and even we created VKOA settings and Tax code in FTXP for TAX condition type it not reflecting in revenue account determination at VF02 View, only Pricing tax determination is showing, TAX determination is missing,
kindly help me out on this.

Hello Sir,
Here i am attaching all the pics which are determined TAX procedure in INVOICE level, still i am not able to reflect the TAX determination for TAX condition type ZICP in first pic. did i missed somtng
javascript:;

I'm looking for a capture device that is compatible with Adobe Flash Media Live Encoder. I bought elgato but it is not compatible. Anyone know?

I'm looking for a capture device that is compatible with Adobe Flash Media Live Encoder. I bought elgato but it is not compatible. Anyone know?

This is just a shot in the dark....
Do you have all your devices hooked up (and on) when you launch FMLE? For example -- your camera or digitizer? When FMLE launches it will try to launch with the last known settings... including input devices. If it can't find these devices (they're not hooked up and on) it can crash, although in most situations it will simply show a default screen with default settings.
If you do have your equipment hooked up (and on) when you launch FMLE, try unplugging them and then launching FMLE so that it opens up in default configuration mode (no input devices selected; all default settings). Then uncheck the "preview" boxes for both your input and output preview windows. Close FMLE and then plug in your equipment (and turn it on) and relaunch FMLE. I offer this suggestion as FMLE can sometimes act funny when the preview windows are open with certain types of input devices. Don't worry -- you don't have to keep the preview windows off forever. If you can get FMLE to successfully launch with the preview windows off, then you can set your settings however you like and save the profile. Then quit and relaunch FMLE and then turn the preview windows back on and see if it works. If it does, great. Just be aware that making any settings changes while the preview windows are open could result in FMLE crashing. Again -- this only happens with some capture devices, such as certain Dazzle capture boxes.
If none of this works, you could always try to upgrade to FMLE 3.2 and see if that solves your problem.

Can you save print settings with a PDF?

I have an 8.5"x14" PDF. Is there anyway to save default print settings with this PDF so if a user opens it on their machine it defaults to printing to 8.5"x14" paper? Right now it always defaults to the standard 8.5"x11". I'm not sure this can be done because it seems like more of a specific users machine thing. I don't think you can save print settings with a PDF can you?
Thanks!

The "auto-formatting" of a hardcopy print format is generally the realm of the output device, in this case the printer. Printer software gereally includes an auto-format feature that selects the proper bin. For those who only have a "letter" tray, it usually asks to feed the right format manually, or switch trays. This is not a PDF feature but an output device feature.
Hope this helps.

Is there anyway to change Info.plist settings and use Flash Builder 4.6 to package the iOS app?

Hi there,
I've tried to package my app with the latest Xcode 4.5 (version 19 Sep 2012) iOS 6 SDK, Flash Builder 4.6, Flex SDK 4.6 with Air 3.5 Beta overlay.
and unzip the .ipa file and i found the following automated settings on the Info.plist file was wrong:
<key>DTPlatformVersion</key>
        <string>5.1</string>
        <key>DTSDKBuild</key>
        <string>9B176</string>
        <key>DTSDKName</key>
        <string>iphoneos5.1</string>
According to the Adobe specs, these settinsg are unchangeble, is there anyway to change these values to produce .ipa file that with iOS 6.0 settings with Flash Builder 4.6?
I believe this cause the following appstore submission issue with the iPhone 5 4-inch display splash screen image [email protected]:
Invalid Launch Image - You app contains a launch image with a size modifier that is only supported for apps built with the iOS 6.0 SDK or later.
Many thanks,
A

Not everyone here was involved in the conversations that led up to this file, so here are some extra clues:
In your AIR3.5 folder (or whatever you named the folder) is a lib folder. Inside that is the current adt.jar file. Rename that in case you have to go back to it, and drag the supplied adt.jar file into the lib folder. Now publish your app.
You won't even need to quit Flash or Flash Builder.
Once you have the new IPA, go through the usual upload steps to the App Store, using Application Loader, and the file should process ok in iTunes Connect. Note, you will be asked to provide iPhone 5 screenshots.

Iphone 5 low battery settings with wifi

Are there any special Iphone 5 low battery settings with wifi? Today I was using my iphone and the wifi magically turned off by itself. I figured it was just having trouble finding the wifi so I went to my settings to see what was going on. Somehow it turned itself off. I'm guessing this is because I had a low battery. I just got the battery message saying my phone had reached 20% battery a few minutes before that happened. Has this ever happened to anyone before?

mattatl wrote:
Has this ever happened to anyone before?
Yes, and you would have had that answer had you bothered to search this forum before posting.
Basics from the manual are restart, reset, restore from backup, restore as new.

Private IP Addressing---? Manual Settings

Our Cbeyond service gives info that we have Private IP Addressing for Network Config. Public IP Addressing is not provided.
Does that mean that I can't use Automatic but must do Manual Settings for Internet Accesss?

Okay I know you are going to ask how.
When you visit the above website actually when you visit any website, it needs to know your external IP address in order to deliver the information from that website to your browser.
What the browser wants to do is send a command to the Web server on www.apple.com that looks like this:
GET /index.html HTTP/1.0
Here's how that happens. The command is made into a packet, a block of bits like a telegram that is wrapped with three important things; the source address (the IP address of your machine), the destination address (17.254.0.91 ), and a service number or port number (80, in this case) that indicates that it's a World Wide Web request.
Your machine then ships the packet down the wire (your connection to your ISP, or local network) until it gets to a specialized machine called a router. The router has a map of the Internet in its memory — not always a complete one, but one that completely describes your network neighborhood and knows how to get to the routers for other neighborhoods on the Internet.
Your packet may pass through several routers on the way to its destination. Routers are smart. They watch how long it takes for other routers to acknowledge having received a packet. They also use that information to direct traffic over fast links. They use it to notice when another router (or a cable) have dropped off the network, and compensate if possible by finding another route.
Once your packet gets to its destination machine, that machine uses the service number to feed the packet to the web server. The web server can tell where to reply to by looking at the command packet's source IP address.
This is your external IP address in other words the website needs to know where to send the webpage information back to.
When the web server returns this document, it will be broken up into a number of packets. The size of the packets will vary according to the transmission media in the network and the type of service.
So why doesn't it supply your internal address, well this is because your router uses NAT and it knows what client on the internal network asked for the information and it is the router (with the external IP address) which asks and therefore when it receives it back, it then forwards it to the client.
As the router asked for the info, it is the router's address which is reported (the external address) and not the internal address.
What this means is that everything you ever ask for on the internet is recorded by the websites you visit.
iFelix
PS In future Gino please start a new topic (referencing the one that sparked the question) to avoid over-complicating topics, thank you.

Privacy/Security Issue with Adobe Flash 10

Not sure if anyone has noticed this or not, but there is a
bizarre (if minor) privacy/security issue with Adobe Flash Player
10. I came across it while attempting to upload a file to Flickr.
Previous versions of AFP do not exhibit this problem.
Specifics: using Firefox 3.x, Vista.
The problem: When Flickr calls the "open file" dialogue in
Flash 10 (in order to upload files) via the "Upload Photos and
Videos" link, at the bottom of the dialogue, to the right of the
"File Name" box, sits a common UI element that brings up a dropdown
menu of what appear to be (or at least are supposed to be) recently
viewed or downloaded or accessed files. Actually I'm not sure how
Flash 10 compiles or accesses this list of files, but at any rate,
a list of files come up.
The problem is that, as far as I can tell, the list of files
that come up reference a long list of files, some that are very old
and that no longer exist, and that there is no way that I can find
to clear the list. This is a minor security/privacy issue, as
generally there should be a way to prevent a dialogue from
displaying a long list of past-accessed files by clearing a cache
somewhere or other -- imagine if it was impossible to clear the
history of a web browser, for example -- this would be considered a
pretty significant privacy issue. I have tried everything from
flushing the browser cache to uninstalling and reinstalling the
browser to uninstalling and reinstalling Adobe Flash to using the
Flash Settings Manager to clear out the Flash saved sites to
turning off Vista indexing to clearing out Vista's Recent Items
list. None of these actions did anything to clear out this list of
files. I can find no references to these files anywhere when I use
Vista Search (with unindexed and system files searched as well),
and I can find no reference to the files anywhere in the registry
(I checked just in case Flash 10 was storing this index in some
really bizarre place.) I've linked to a screenshot below of what
I'm talking about -- most of the files listed below were deleted a
long, long time ago, and so I have no idea why this dialogue refers
to them.
Screenshot
Is there a simple work-around for this that I'm unaware of?
Even if there is, there needs to be some more obvious way to clear
out this list. Where is this information being stored, and what
criteria does this list use to "put a file on the list"?

Thanks for putting me on the right scent. That's what I'd
originally thought, too -- it's just that the file-> open dialog
was giving an entirely different list of files with other
applications, so I assumed that it must be Flash that was the
culprit. Turns out the reason it was different with Flickr was
because it was restricting the file results via a long string of
video and picture filetypes that are compatible with the Flickr
service.
It turns out the information I'm looking for is buried deep
within the registry. The only way to clear out this list of files
is to delete the following key (or specific subkeys):
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\ComDlg32\OpenSavePidl MRU
Seems more than a little stupid to store such information in
the registry if security is your concern. Vista beguiles me
sometimes.

Why i can not open Video Capture Device Settings in Adobe Flash Media Live Encoder?

Hi! I've got a problem with Adobe Flash Media Live Encoder 3.2. Why i can not open Video Capture Device Settings? I'm clicking this button, but it doesn't appear, there is just a blinking of the camera's window. Please help me, i'm looking like a shining red pig! Need to change the light or contrast.

"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator

What operating system smartphone is compatible with Adobe Flash Player?

What operating system smartphone is compatible with Adobe Flash Player?

Hello,
Flash Player is no longer supported on mobile devices. With that said, you can manually install the last supported version of Flash Player for Android devices using the instructions here "Why can't I install Flash Player on my Tablet?" (Kindle or Samsung Galaxy). Do note that this is very old and has not been updated with any security fixes. This FAQ offers some alternatives to Flash Player on Android devices.
Maria

2 Issues with ActionScript/Flash

Hello, I suppose I'll make this also a little bit of an introduction, I'm a 20something year old Graphic Design graduate, who has found herself working in a small business where everything is done in house. My job skills have had to be stretched a little, as normally my work only involves photoshop, indesign, illustrator, and dreamweaver. I've never used Flash before, but since the company is moving onto digital media and the motorola xoom I've had to pick it up.
The company I work for has a very large catelog that they put on CD, and they are looking to update it, so I've been making a flash index page for it. The entire catelog is in PDF (bookmarks used as links between various PDF files), but the index page is Flash (I cant acess the origional index file, as it was done several years go). Basically the elements I'll need are 3 links (for website, install cd catelog, and view cd catelog) 1 exit link, and scrolling text. So far I've managed to import the links and images and get text on the page, but I've hit a couple major snags.
1st Issue: Looping the scrolling marquee text. At the top of the index screen I need text to continuously scroll at the top. I tried to find loop codes, but all I found were convoluted tutorials involving 'for' loops and 'for if' loops etc etc and even after reading them several times I have no idea what any of them are saying. I think a lot of these tutorials are made for people who have a basic understanding of flash...I literaly just opened the program today. I was able to figure out the inserting Keyblanks and such so I have text that scrolls across the top screen once (I used tweening for that) but you cant copy or paste, so I'm really at a loss as to how to make the text loop so it continues to scroll across.
2nd Issue: The installation link has me a bit bothered, mostly because I have no clue where to even begin with this. In the old CD catelogs when you click 'install' the 'instal shield wizard' comes up and downloads to the desktop the entire catelog (the cd catalog itself) and a link to the website. Both of which show up as Buttons on the desktop. So one of the links has to be able to do that...and I am entirely at a loss as to how this works in Flash. Is this type of thing even doable in Flash?
I know that this is probably asking a lot, even though its only 2 problems, but if anyone would be willing to help me out it would be greatly appreciated. Thank you!

The first one is the easiest and I haven´t heard about
any issues except that flash will comsume more resources and will
play a little slower. The second one can also be done (repeating an
image all the time with Flash 7 or older, or painting with a tiling
image on Flash 8) even manually, or with some coding.

D70 manual settings with studio flash

Similar Messages

Maybe you are looking for