D7000 raw files not seen in my iMac OS 10.7.5; Bridge and Photoshop CS4 Extended

Please help!!! I just bought a Nikon D7000 and my iMac OS 10.7.5 does not recognize it, I cannot see the D7000 on the Desktop, Bridge, Photoshop CS4 Extended, etc Please assist. 

ACR 6.x only works with Photoshop CS5, not CS4.  The latest Camera Raw you can install into Photoshop CS4 is 5.7.
You have two choices, one free, one not:
1.  Use the latest version of the free downloadable Adobe DNG converter to convert all your raw D7000 images to .DNG files each time you shoot, then open the .DNG files into Photoshop CS4, which it knows how to read with Camera Raw 5.x.
2.  Upgrade to Photoshop CS6, which will give you maximum convenience and integration to be able to just open the D7000 raw .NEF files directly through Camera Raw.
-Noel

Similar Messages

  • Can't import raw files; not seen by Lightroom

    I have a Canon Eos 20d, Lightroom 2.3, and Windows XP. I just shot raw files for the first time and tried to import them into Lightroom. All of my jpeg photos on the memory card could be imported, but none of the raw files appeared to be even "seen" by the program. Any suggestions?

    >Is there no way to do it from the camera directly?
    I don't know about this camera but many Canons allow you to change the communication mode on the USB bus. For your computer to recognize the camera without special proprietary software, you need to set it to PC connection instead of PTP. This is usually in the setup section. In this mode, also called mass storage mode by other manufacturers, any software and any computer can communicate with your camera and it will just be seen as a (very slow) card reader. If you keep it in PTP mode, the computer can only see the jpegs. Very annoying indeed. It is very possible that your camera doesn't have the mass storage mode and then you might have to use Canon's software to load the RAW images from your camera or get a $10 card reader. A card reader should always work.

  • Bridge and Photoshop CS4 will not recognise the images shot in NEF file

    Shot in Nikon D810 with NEF file but the images will not recognise with Bridge and Photo
    shop CS4

    That camera was recently supported for the first time by ACR 8.6, which needs at least CS6 to run.  You will never be able to open those raw NEF files in CS4, as there will never be an update for CS4.
    Your choices are to upgrade, or to use the free, stand-alone Adobe DNG Converter 8.6 on each and every batch of raw NEF files in order to convert them to raw DNGs that you can open in CS4.
    Mac:
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
    Windows:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6

  • How can I orf files in bridge and photoshop cs4

    I have downloaded the latest plugins but still can't open raw files form my OMD-E-m5

    OM-D E-M5
    ORF
    6.7, 7.1
    That camera was supported for the first time in ACR 6.7 which requires CS5 to run.
    Your options are to upgrade to Photoshop CS6, CC or CC2014, or to look for, download, install, launch and run the free, stand-alone Adobe DNG converter 8.6 on each batch of raw ORF files in order to convert them to raw DNGs that you can then open in your CS4 installation.
    Note that you will be leaving a lot of image quality on the table if you go that last route as significant improvements have been made to ACR in the latest versions.
    Just a clarification in general, not necessarily referencing this or any other post:
    Remember, you are not addressing Adobe here in the user forums.  You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.

  • Nikon D7000 raw files will not open using PSE 11

    I am unable to open Nikon D7000 raw files(NEF) using PSE 11
    When I use the program's "Update "function I just get an error message.
    Can anyone advise?
    Thanks

    This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the proper forum so that it can get proper attention.
    We also have many other forums relating to other Adobe products at: http://forums.adobe.com.

  • HT3825 I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    This page might help.
    Note that your question does not relate to Apple software nor hardware.

  • Opening nikon d7000 raw files in pse8

    I have downloades camera raw 6 plug in but I am still getting the wrong file type error when I try to open my nikon d7000 raw files in elements 8.
    any suggestions??

    You need to update to PSE9 as your camera model is not supported in earlier versions
    N.B. If you are not wishing to upgrade to PSE9 - you can use the freely available DNG converter 6.3 and then use Elements to open and edit the DNG files. It’s recommended you keep your original raw files as back-up as they can always be read by your camera software.
    DNG Converter 6.3for Windows.
    DNG Converter 6.3 for MAC.

  • Opening Nikon D7000 raw files in Elements 8

    I am unable to open Nikon D7000 NEF files in Elements 8. I have been unsuccessfull in downloading the version 5.7 update from the web site. After downloading several times the files are still not recognized in Elements 8.

    I am using Windows 7. I tried selecting the folder that contained the folder holding the pictures to be converted. I then single-clicked the folder holding the pictures and hit select. A message came up stating that the source folder did not contain any supported camera raw files.I have spoken with my Elements software supplier and this is his response:
    "I've done some digging and it turns out the Nikon D7000 wasn't supported in elements until the release of version 6.4 Adobe Camera Reader.So to make sure you have the latest ACR update installed. You can check which one you have by going into elements and clicking Help>About Plug-In>Camera Raw. And if it's not 6.7 then Help>Updates will find it and let you install the latest version. You could also try saving your camera files as .RAW instead of .NEF, and then opening them in elements. Adobe lightroom 4 should already have these plugins available right outside the box, but if you can save the money and run updates instead that would work just fine." I have checked for Elements updates for the Camera Raw plug-in and the message appears stating no updates are available. The camer raw plug-in version is currently 6.1.0.250.
    Date: Fri, 28 Sep 2012 07:35:41 -0600
    From: [email protected]
    To: [email protected]
    Subject: Opening Nikon D7000 raw files in Elements 8
        Re: Opening Nikon D7000 raw files in Elements 8
        created by R_Kelly in Photoshop Elements - View the full discussion
    What operating system are you using?
    The most common cause is pointing the dng converter to the actual files and not just to the folder that the camera raw files are in.
    There is an example of how on a windows system in this thread:
    http://forums.adobe.com/message/4633126#4633126
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4734703#4734703
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4734703#4734703
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4734703#4734703. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How to open D7000 RAW file in elements 9

    how to open D7000 Raw file in elements 9

    Barbara B.
    Your suggestion to try another file resolved the Converter  issue.  I found that I can open any jpg or tif file in any album that appears in the
    Windows Explorer.  So the problem was not with the RAW Converter.  Instead, I found another problem.  The ENTIRE Album
    containing the file I had been trying to open  is missing from the Windows Explorer (and I cannot open the file from the Album
    showing in the Organizer --  while I'm in the Editor!).
    So -- can you give me any help with this new problem of an Album that shows in the Organizer but not the Windows Explorer?

  • Aperture 2 and Nikon D7000 RAW files. Do I need to upgrade to Aperture 3?

    I currently have a Nikon D70 with a Nikon D7000 on its way. I want to know if Aperture 2 will process Nikon D7000 RAW files. I searched Apple support and these discussions. I only could find confirmation that Aperture 3 now handles it. But I have not found anything that confirms that Aperture 2 indeed did NOT get an update to handle the D7000 RAW files.
    Can someone confirm this?
    Thanks.

    For future reference, all the cameras listed on the Aperture RAW Support web page that have the double asterisk "**" require Aperture 3.

  • New update 8.7.1 CS6 ACR not working---(I own hard copy not a Trial or part of CC), I purged cache in bridge, and photoshop. NO photos will open when I double clik, or  will not open again in ACR alone.  When I double clik on raw file I get Sign In requir

    I purged cache in bridge, and photoshop. NO photos will open when I double clik, or  will not open again in ACR alone.  When I double clik on raw file I get Sign In required Notice--We will now register your TRIAL to your Adobe ID-------I am alread a SUBSCRIBER-------------Yes I get this same issue in Creative Cloud and same issue. error: Camera Raw editing is not enabled-----Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature. These errors are happening inside both CS6 Bridge and CCphotoshop Bridge------NOTE----I am ALREADY signed into Creative Cloud and still get those message errors.........Need to fix ASAP.

    When you sign in to Adobe.com with the user ID and Password your using in the Creative Cloud and Photoshop does this link  https://www.adobe.com/account/my-products-services.html show that the account has a subscription?
    Also this is a user forum not a Adobe Customer Services web site.

  • After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly, neither in preview nor in Camera Raw dialog.

    After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly anymore, neither in preview nor in Camera Raw dialogue.
    Some pictures have white squares with blue and red diagonal stripes that cover almost the complete picture.
    When opening those files I have the same problem in Camera Raw dailogue and even in Photoshop eventually.
    I tried to open the same same pictures on another computer with the same version of Bridge and Photoshop but the problem remains the same.
    It seems like the files itselves are still ok, because if you open an explorer window the previews of the pictures are all ok. And the pictures' sizes remain the same.
    I tried to clear the cache in both programs but it didn't help.
    Has anyone an idea????

    First see if a reboot of your PC helps.  If not,
    Resets may be in order:
    Photoshop: Press and hold Control - Shift - Alt immediately upon cold-starting Photoshop.  If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.
    Bridge:  Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears. Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.
    Outdated graphics drivers can also cause display problems. Go to your GPU maker's website and be sure you have the latest drivers for your card model.

  • New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

    New Nikon Df camera RAW files not recognized in Bridge and Photoshop.  Is there a fix?  Surely Adobe make a mistake and not keep up with Nikon.

    I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
    Would post in ACR forum and see if they know anything more.  http://forums.adobe.com/community/cameraraw

  • RAW files not launching

    After a system crash I reinstalled Lightroom 3.6 and subscribed to Creative Cloud.
    Downloaded and installed without issue Bridge and Photoshop CS6 - 64bit Windows 7 system.
    Some (NOT ALL) of the RAW files (ORF) that I restored from a backup will not display thumbnails or launch in Bridge or Lightroom.
    Bridge gives me the error "Could not complete your request because its not the right kind of document"
    Lightroom gives me the error "Preview not available"
    I've checked the knowledge base and reviewed similar issues with CS3 but none of the solutions make sense since this is a new install and my cameras have been supported in Adobe Camera Raw since v5.3 or earlier.
    I did download and install the camera manufacturer's editing program and it will display the files without any issue - I had throught this may have been a Win7 issue but since I can launch a raw file from this viewer it suggests the issue is with the Adobe products and not a Win7 problem.
    Really not sure what to try next and would appreciate some suggestions.
    Thanks in advance.

    After additional investigation I have resolved the issue via a combination of removing the camera raw file from the 32 bit plug-in folder as suggested here http://helpx.adobe.com/photoshop/kb/generic-icons-camera-raw-files.html
    As well as it appears that when I restored my backup from Carbonite all the files came back without the proper security settings which was preventing these items to be viewed in Lightroom and Bridge because file editing was not enabled even through the "read only" checkbox was removed.

  • Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

    Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

    Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
    Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
    You can double check this yourself:
    First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
    Keeping Photoshop Up-To-Date
    If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
    Photoshop Help | Digital Negative (DNG)
    The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
    -Noel

Maybe you are looking for