D7263. Wrong printout colors under Vista/Wron​g borderless printing.

    Getting dull colors while printing under Windows Vista from Print Manager or any application (Photoshop CS3). Colors are as expected (ok) while I print those photos under XP virtual machine (from under Vista Ultimate).
    Another problem is stupid results with borderless printing.Though I prepare dimension of the photo to match paper size (lets say 4x6inch x 600dpi), using borderless printing option, I always get printouts cutted  about 0,2 inch on EVERY side.
    I got strange result from HP online consulting in July or August: "We do not have correct driver for Windows Vista yes. That's why you have those problems. We expect new driver SOON."
    As the latest version of the Vista driver is 10.0 (02/2008) and I use it, I do not know how to use my Photosmart for photo printing under Vista...
    Any  suggestions?

system ink has failuor

Similar Messages

  • Performance problems with CS2 under Vista

    I used to run CS2 under XP and everything was fine! A technical fault with the PC caused the hard drive to wipe itself, and for some silly reason I installed Vista when I reinstalled everything.
    The PC is very powerful and has plenty of RAM, but CS2 runs very badly on it. It can run normally, usually for the first few seconds of use, but will inevitably slow down. Anything to do with an onscreen image, such as marking an area, painting, anything. I mean it really slows to a crawl. Positioning the cursor on a location and rapidly moving it to one side, there can be a delay of several seconds before it moves! This really makes the software unusable. Thing is, I cant tie down what it causing it. The CPU use hits 100% which is the obvious reason, but why it is, I dont know. There doesnt seem to be any disc access. Also, it doesnt depend on how large or small the image is. It happens even editing an image as small as 400x400. If there is one thing, then it may well be that it is when the image is enlarged so that it is bigger than the window it is displayed in. In other words, the scroll bars are present. It never seems to happen when they are not present. Does anyone have any ideas? All the drivers are fully up to date, nothing is causing problems. the machine scores 5.9 on the vista performance test and it has 4GB of ram.

    Am I looking in the wrong place?
    Were can it be modified?
    I was adjusting it in the window color and appearance. Advanced. The only problem was that I couldn't adjust the color of the window frames under aero. Specifically things like the status bar. I currently use an old style windows setup because I can set everything to mid gray, including scroll barss, status bars and so on. It may be boring, but is best for the type of work I do.
    By the way, I have cured the problem. Under Performance Visual Effects, I disabled all the silly stuff that is hardly ever used like "Slide theTask barar Buttons" and the problem went away. Some of these are not actually used unless you use Aero anyway. I don't know which one was causing the problem, but anyway, it's gone!
    I would still like to be able to set all the colors under aero, so if anyone can tell me how, would be greatly appreciated.

  • Secure Web.Show_Document with forms10.1.2.3 under vista Need authentication

    Hi All
    I installed forms 10.1.2.3 successfully under Windows Vista , i use Java Bean described in the OTN Forms document titled "Oracle Forms Services - Secure Web.Show_Document calls to Oracle Reports" ,but when the form calls the report, the following error message :
    "REP-51018: Need database user authentication" is presented to the user.
    note : I did this before successfully with forms 10.1.2.0.2 under windows xp
    What is wrong with me please under Vista ?
    Note :The Java console give this :
    Java Plug-in 1.5.0_12
    Using JRE version 1.5.0_12 Java HotSpot(TM) Client VM
    User home directory = C:\Users\crizma1
    network: Loading user-defined proxy configuration ...
    network: Done.
    network: Loading proxy configuration from Internet Explorer ...
    network: Done.
    network: Loading direct proxy configuration ...
    network: Done.
    network: Proxy Configuration: No proxy
    basic: Cache is enabled
    basic: Location: C:\Users\crizma1\AppData\LocalLow\Sun\Java\Deployment\cache\javapi\v1.0
    basic: Maximum size: unlimited
    basic: Compression level: 0
    basic: Plugin modality.register
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    o: trigger logging
    p: reload proxy configuration
    q: hide console
    r: reload policy configuration
    s: dump system and deployment properties
    t: dump thread list
    v: dump thread stack
    x: clear classloader cache
    0-5: set trace level to <n>
    basic: Registered modality listener
    liveconnect: Invoking JS method: document
    liveconnect: Invoking JS method: URL
    basic: Referencing classloader: sun.plugin.ClassLoaderInfo@e34726, refcount=1
    basic: Added progress listener: sun.plugin.util.GrayBoxPainter@7be8c2
    basic: Loading applet ...
    basic: Initializing applet ...
    basic: Starting applet ...
    basic: Referencing classloader: sun.plugin.ClassLoaderInfo@e34726, refcount=2
    basic: Releasing classloader: sun.plugin.ClassLoaderInfo@e34726, refcount=1
    network: Connecting http://mostafa:8889/forms/java/frmall.jar with proxy=DIRECT
    basic: Loading http://mostafa:8889/forms/java/frmall.jar from cache
    basic: Reading cached JAR file from JRE 1.5 release
    basic: Certificates for http://mostafa:8889/forms/java/frmall.jar is read from JAR cache
    security: Loading Root CA certificates from C:\PROGRA~1\Java\JRE15~2.0_1\lib\security\cacerts
    security: Loaded Root CA certificates from C:\PROGRA~1\Java\JRE15~2.0_1\lib\security\cacerts
    security: Loading Deployment certificates from C:\Users\crizma1\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs
    security: Loaded Deployment certificates from C:\Users\crizma1\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs
    security: Loading certificates from Deployment session certificate store
    security: Loaded certificates from Deployment session certificate store
    security: Loading certificates from Internet Explorer ROOT certificate store
    security: Loaded certificates from Internet Explorer ROOT certificate store
    security: Loading certificates from Internet Explorer TrustedPublisher certificate store
    security: Loaded certificates from Internet Explorer TrustedPublisher certificate store
    security: Checking if certificate is in Deployment permanent certificate store
    basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/splash.gif
    basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/oracle_logo.gif
    basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/bgnd.gif
    network: Connecting http://mostafa:8889/forms/java/oracle/forms/registry/Registry.dat with proxy=DIRECT
    network: Connecting http://mostafa:8889/forms/java/oracle/forms/registry/default.dat with proxy=DIRECT
    proxyHost=null
    proxyPort=0
    connectMode=HTTP, native.
    network: Connecting http://mostafa:8889/forms/frmservlet?form=d:%5CFEMTOSOFT%5CACC%5Cmainmenu&separateframe=true&acceptLanguage=ar-eg&ifcmd=startsession with proxy=DIRECT
    network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011?ifcmd=getinfo&ifhost=Mostafa&ifip=192.168.1.2 with proxy=DIRECT
    network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
    network: Connecting http://mostafa:8889/forms/java/frmrwinteg.jar with proxy=DIRECT
    java.io.FileNotFoundException: http://mostafa:8889/forms/java/frmrwinteg.jar
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
         at sun.plugin.cache.CachedJarLoader.isUpToDate(Unknown Source)
         at sun.plugin.cache.CachedJarLoader.loadFromCache(Unknown Source)
         at sun.plugin.cache.CachedJarLoader.load(Unknown Source)
         at sun.plugin.cache.JarCache.get(Unknown Source)
         at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
         at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
         at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
         at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
         at sun.misc.URLClassPath$3.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.misc.URLClassPath.getLoader(Unknown Source)
         at sun.misc.URLClassPath.getLoader(Unknown Source)
         at sun.misc.URLClassPath.getResource(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.util.ResourceBundle.loadBundle(Unknown Source)
         at java.util.ResourceBundle.findBundle(Unknown Source)
         at java.util.ResourceBundle.getBundleImpl(Unknown Source)
         at java.util.ResourceBundle.getBundle(Unknown Source)
         at oracle.forms.registry.MessageManager.getMessage(Unknown Source)
         at oracle.forms.registry.MessageManager.getMessage(Unknown Source)
         at oracle.forms.engine.Runform.createInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    basic: WARNING: error reading http://mostafa:8889/forms/java/frmrwinteg.jar from cache.
    basic: httpCompression = true
    basic: Downloading http://mostafa:8889/forms/java/frmrwinteg.jar to cache
    basic: encoding = null for http://mostafa:8889/forms/java/frmrwinteg.jar
    network: Connecting http://mostafa:8889/forms/java/myappicons.jar with proxy=DIRECT
    basic: Loading http://mostafa:8889/forms/java/myappicons.jar from cache
    basic: No certificate info, this is unsigned JAR file.
    network: Connecting http://mostafa:8889/forms/java/oracle/forms/engine/RunformBundle_ar_EG.class with proxy=DIRECT
    network: Connecting http://mostafa:8889/forms/java/oracle/forms/engine/RunformBundle_ar_EG.properties with proxy=DIRECT
    إصدار بريمج Forms هو : 10.1.2.3
    network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
    network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
    basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/frame.gif
    network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
    network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
    Edited by: Mostafa Abolaynain on Jun 18, 2009 7:50 PM

    If I am remembering correctly, some changes were necessary in order to make this work with 10.1.2.3. So, if you are using the old jar which you used in previous versions, I would recommend obtaining the one specifically updated for 10.1.2.3. Refer back to the OTN page which has the download and choose the link that references the new version:
    http://www.oracle.com/technology/products/forms/techlisting10gR2.html
    Be sure to clear the client Jar cache before re-testing. This is not the same as the browser cache.

  • Power manager problem under vista 64 bit

    Happy to see Lenovo opened a forum and willing to hear from the customers.
    Power manager has problems under Vista 64bit:
    1. Sometimes it will cause explore.exe can't start when windows start.
    2. If no window at max, the color of the battery icon will be very dim
    Hope Lenovo can publish a new edition for vista 64 bit.

    http://it.toolbox.com/blogs/achieving-great-bi/obiee-on-vista-64bit-with-iis-70-29882

  • Duplicate files appearing in Windows Photo Gallery under Vista Home Basic.

    I am suffering a bout of duplications in my Windows Photo Gallery under Vista. I am getting duplicates, triplicates and quadruple versions of the original file.
    Despite turning off all Autoplay media types to 'No Action', I get random duplicates when I try to enter update pictures from camera or memory chip through a USB port. There is no 'Enter Updates Only' option, and Microsoft says that this is unnecessary as
    duplication is prevented. The duplicates however appear with 'copy' in the file name after the image numbering system. My preference is to view the memory contents via 'Computer' - select and open the port, and view, then copy and paste into Photo
    Gallery.  Photo Gallery kicks in to view the chip correctly, but often/always (?) promptly uploads uncommanded. It did not used to do this, only in the last year or two.
    What do I do, it is driving me crazy ?  

    Hi,
    As I know, for Duplicate issue, it might be caused by a corrupted database, please try to rebuild it as a test.
    Close Windows Photo Gallery
    First show hidden files.Navigate to C:\Users\Usename\AppData\Local\Microsoft\Windows Live Photo GalleryRename “Pictures.pd” to “Pictures.pd.old” (without quotes) and reopen Windows Photo Gallery.
    Yolanda Zhu
    TechNet Community Support

  • Need to switch off and on my apple tv v2 each time I want to connect my PC under vista

    Hello
    need to switch off and on my apple tv v2 each timeI I want to connect my PC under vista.
    After that, everything is going well...
    But it is not the best user experience ;-)
    Any idea if this can be fixed ?
    My PC is under Vista...
    Thanks a lot

    I'm having the same problem.  It seems to have started after the most recent firmware upgrade.  Does anybody know if Apple is looking into this?  It's rather irritating to have to reboot the Apple Tv every time I want to use it!

  • ITunes 7.3.1 under VISTA causes DVD/CD driver conflicts or blockage !!!!!!!

    After installing iTunes under VISTA I noticed that both of my DVD/CD drives were missing. Device manager shows a conflict or blockage causing the drivers not to start.
    I tried iTunes 7.3.1 on another PC with VISTA and it did the same thing. I had to remove iTunes since it basically disables by DVD and CD drives. Any ideas?

    Actually everything is working just fine after I had
    uninstalled iTunes 7.3.1. Oh, I didn't have error
    code 31 but just for your information it was 10.
    Please don't give bad advice to people or perhaps to
    some that don't even know what regedit is or will
    even do for that matter. Apple should be able to
    put together a script that will get the job done
    correctly without having the enduser try a dangerous
    tool.
    I love how you're asking for help, and then refusing the help provided. Regedit is complex, but that article goes through it step by step, and even gets you to export the specific registry tree that you will be working on, so you can set the registry back to how it was before.
    However, the regedit fix that was mentioned earlier would be the easiest thing to go through. If you go through the steps and it doesn't work, try going through the exact same steps again, except skip the step where is says to enter 'GEARAspiWDM' in the UpperFilters. If you just leave UpperFilters blank, and restart the computer, the CD drive should re-appear, and iTunes should work (but give you a message saying that you'll be unable to import or burn CD's... although most of the time you still can anyways). If it doesn't work, you can always import the registry tree back to how it was before, and close out of that scary regedit program.

  • Light Room Under Vista 1.3.1

    Hello, I purchased lightroom back in 4/07 with hopes of eventually getting a new computer around christmas.
    So around christmas I got my new computer and moved my copy of LightRoom from an XP machine to a Vista Home Premium Machine. Quad core 6600 2.4GHz 3GB Memory and 512MB Nvida 8800GT Graphics card. It seemed to run okay at first but then when I updated from 1.0 to 1.3.1 it got to were it barely runs. It can take upto 5 hours for it to import 25 10MP raw files from a card to DNG format, creating standard previews. about 20minutes ago I clicked auto tone for a photo still waiting 20 minutes later for the new render of the file.
    I have tried disabling the AERO Feature, I have tired deleting and recreating the preference file.
    On Adobe's website it shows it is windows vista compatible, but now that I click on there tech support site is shows they don't guarantee it to work under vista.
    Then I read under the knowledge base that NVIDA Display Manger software creates a know issue with this. So they stat I should remove it. I am not sure if I have the version the reference as it is not called the same. But serves the same function and comes from NVIDA. It just seems kind of silly I buy a new computer with 2 22" monitors to work on photographs. Buy the software that is suppose to be great only to read in the knowledge base they recommend that you remove dual monitor support from your computer to get things to run. This really seems odd considering they tout my other software photoshop and its ability to use multiple monitors. Hence the reason I upgraded my machine in the first place.
    Any help anyone can give it getting on the path to once again being able to use lightroom would be great.

    Hello Breezez,
    I think there must be something else going on on your computer, the dual monitor support should be no problem. I use Lightroom under Vista on a less powerfull machine with Aero switched on, dual screens and DNG files and have no problem whatsoever. I use an ATI Radeon X800 Pro video adapter, not exatly the most up to date video card for that matter. My database contains more the 7000 photographs, most af them DNGs. I would be surprised if the slow speed had anything to do with using two screens. It sounds as if some other process is eating processor capacity. Checking for updates for your video card, BIOS and chipset drivers seems good advice to me. Try switching off the antivirus program (temporarily of course!). There might be a resource conflict.
    Hans

  • [SOLVED] Gnome notification area has wrong background color

    I'm using the Shiki-Brave theme on Gnome and all (yes, all) of the tray icons have the wrong background color.  The color changes slighty if I select another Shiki theme, but is pretty close to the default gray.  Strangely, I only have this issue on my desktop at home -- none of my other machines (two laptops and a desktop at work) exhibit the problem.  I have ensured that the theme is exactly the same on all machines.  Another oddity is that other themes (e.g. high contrast inverse) have the right background color!
    The only thing I have managed to find via Google is a bug report against Gnome.  Here is what I have tried:
    * Removing and readding the applet to the panel.
    * Blowing away all my settings (rm -rf .gnome2 .gconf .gconfd .local) and setting things up again.  To be sure I did not miss anything, I also tried creating a new user with a clean home.  Still the same issue.
    * Removing and reinstalling all of the gnome and gnome_extra groups.  I even cleared the pacman cache to force a redownload.
    Any ideas?  I'm at a loss on what to try next.
    Thanks!
    Last edited by kdorf (2011-04-09 06:29:51)

    I figured out the problem.
    I have an NVIDIA card and I recently modified my X server to use Xinerama instead of TwinView.  Xinerama was responsible for all this nastiness.  Reverting to TwinView fixed the problem (and some other weird ones that started popping up).
    Those of you with NVIDIA cards, avoid Xinerama!

  • Can't start device-manager.exe under Vista

    Can't start C:\Program Files\NetBeans 6.9\javafx\javafx-sdk\emulator\mobile\bin\device-manager.exe under Vista 32. It works fine under Windows XP
    error is java.net.BindException: Address already in use: JVM_Bind
    I changed C:\Program Files\NetBeans 6.9\javafx\javafx-sdk\emulator\mobile\toolkit-lib\modules\bootstrap\conf\system.properties
    I tried
    device-manager.object-registry.host: 127.0.0.1
    device-manager.object-registry.port: 61309
    no success
    my C:\Windows\System32\drivers\etc\hosts consists
    127.0.0.1 localhost
    ::1 localhost
    error output is
    [   2408] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-ConnMg
    rBridgeFactory
    [   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldc-Midle
    tMgrBridgeFactory
    [   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-Midlet
    MgrBridgeFactory
    [   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldc-Profi
    lerBridgeFactory
    [   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-Profil
    erBridgeFactory
    [   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldcnokdp-
    ConnMgrBridgeFactory
    [   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldcnokdp-C
    onnMgrBridgeFactory
    [   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldcnokdp-
    MidletMgrBridgeFactory
    [   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldcnokdp-M
    idletMgrBridgeFactory
    [   2410] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
    [   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on DeviceAddre
    ssManager
    [   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on DeviceAddres
    sManager
    [   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on DeviceRegis
    trationNotifier
    [   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on DeviceRegist
    rationNotifier
    [   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on HttpServer
    [   2494] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on HttpServer
    [   2494] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on RapiClientS
    ervice
    [   2500] ERROR - sun.kvem.tools.http.HttpServer - java.net.BindException: Addr
    ess already in use: JVM_Bind
    java.net.BindException: Address already in use: JVM_Bind
    at java.net.PlainSocketImpl.socketBind(Native Method)
    at java.net.PlainSocketImpl.bind(Unknown Source)
    at java.net.ServerSocket.bind(Unknown Source)
    at java.net.ServerSocket.<init>(Unknown Source)
    at java.net.ServerSocket.<init>(Unknown Source)
    at com.sun.kvem.tools.http.HttpServer.createServerSocket(Unknown Source)
    at com.sun.kvem.tools.http.HttpServer.run(Unknown Source)
    [   2547] ERROR - sun.kvem.tools.http.HttpServer - java.net.BindException: Addr
    ess already in use: JVM_Bind
    java.net.BindException: Address already in use: JVM_Bind
    at java.net.PlainSocketImpl.socketBind(Native Method)
    ...

    I am having the same problem here with Windows 7 64bit. Why are most of Oracle forum posts are left unanswered. Found many people having similar problems, but nobody seems to have the answer. Anybody, please help
    Thank you in advance
    Regards,
    pra

  • Error installing FlsahPlayer under Vista 32 SP1 with Explorer 7

    Please help me. I cannot install the latest Adobe Flash
    Player. Always feezes the Internet Explorer. I can download, but
    than stops the install. I changed the safly settings to the
    recommended level, but the problem same.
    I have Vista 32 SP1, IExplorer 7.
    Thank you.
    [email protected]

    You may want to try a few different SD cards, there are apparently some which do not play well with Vista.
    Personally I haven't had any issues with a 2GB SanDisk SD card running as ReadyBoost in an X61 under Vista Ultimate x64.
    Cheers,
    Bill
    I don't work for Lenovo

  • X-fi platinum gives out only static noise under Vista x64

    hello. I need some help getting x-fi to work under Vista x64.
    the card works great under XP. no problems at all.
    under Vista x64 drivers install fine. but the card only outputs very loud static sound. sometimes all the time, sometimes only when I try to play music. when I try to play audio the program usually freezes or acts like it takes much longer to play the sound. for example Vista speaker test shows speaker animation for much longer than normally.
    switching to Audio Creation mode usually helps some, but still only static.
    switching in Vista Sound->Recording devices causes a lot of static to be generated as soon as I switch to it (and nothing is being played).
    sometimes there's no sound at all (programs act normally then).
    I've tried all X-Fi drivers I could find (newest and older, including from X-Fi Vista CD) to the same result.
    tried 5. speakers and connect to front panel.
    tried installing drivers in safe mode. tried clearing old driver after driver un-install to reinstall the driver fresh.
    if it wouldn't work under XP I?would have sent it back, bet seeing that it works fine there I can only guess that it has something to do with drivers.
    any help would be appreciated. thank you.

    if anyone experiences the same issue, reformatting HDD and reinstalling Vista from scratch solved tho problem.
    I guess there was some conflict with the previous sound driver.

  • Get Flash Player to work under Vista

    Using Internet Explorer, I am trying to get Flash Player 10 to work under Vista 32 bit. When I go to youtube.com, their greeting says "Hello, you either have JaveScript turned off or an old version of Adobe's Flash Player. Get the latest Flash player."    Looking at the 'Programs and features' on the Control Panel, it shows 'Adobe Flash Player 10 activeX' is installed.  In the Internet options, the security level is Medium-High. I tried to change this to medium but the sytem keeps reverting to Medium-High and in the scripting area, Active Scripting is set to enable. Can someone please tell me what I need do to get Flash player to work on my system.

    Anyone here get an answer yet? Suddenly I'm getting those same messages that I either don't have javascript enabled (I do) or I need to get the latest version of Flash Player. But the latest version isn't for Windows 64. So what am I supposed to do, and what happened to cause this?

  • Building LabVIEW Executables That Prompt For Administrative Rights Under Vista

    Hi Everyone,
    I've discovered the hard way the differences between Vista and XP...  I've got a compiled LabVIEW program that needs administrative privledges to run.  However, when a user launches the program without proper rights under Vista, it doesn't prompt for administrative rights, it just runs and produces strange errors.  Is there a way to make the program prompt the user for administrative rights so that they don't always have to right-click and select "Run as administrator"?  I heard mention of a "manifest" file that can do this, but I haven't found any details.
    Thanks!

    I have no solution, but do you know why have to be an Admin to run your program? Do you write data to c:\program files? or any other 'forbidden' location?
    Maybe rewriting your app is the best option?
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Elements 6 Runs under Vista 64 BUT nothing happens !

    Under Vista 64bit OS I have installed the elements 6 software and the installation completed fine. When I start the
    program nothing happens. I have inserted an SD card into my PC and the Adobe Photo Autodownloader started OK, so at least part of
    the software is working.
    I have tried an uninstalled and reinstall  but this makes no difference. If I open the program, nothinghappens. The process appears in Task Manager as running Photoshop Element 6.0.exe but the application does not start. Aside from the entry in the Task Manager there is no sign of the application actually running.
    I have an open problem with Adobe but so far they have sent one suggested fix that was for a different application on a different operating system ! Plus one suggested fix that was for a different problem !
    Has anyone seen this and/or can provide any suggestions.
    Any help would be very much appreceated. !

    Hi,
    Thanks for this suggestion .  I have tried this twice but it does not seem to make any difference so I still have the problem where nothing happens when I run the application.
    Not sure if anyone else has this issure.
    Adobe support suggested this as well (a few hours after yourself).
    Any other suggestions out there ?

Maybe you are looking for