D800 Files will not open in CS5

I cannot open NEF (RAW) files from my Nikon D800. I have upgraded the Camera RAW filter to 6.7. I have installed DNG 8.1 all without results.
Notes: If I use Camera Control Pro 2 (tethered) to import the files the files open just fine in CS5. If I import the files using Pro Control 2 and then copy and paste the files into folder they open just fine.
Any help is appreciated.
Thanks.

If you used an older version Nikon Transfer or ViewNX to download the images from your camera, it's possible that they have made them unreadable by Camera Raw or other Adobe products.

Similar Messages

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
http://rawtherapee.com/

Textbook CS5 files will not open in CS5.5

I know this has been broached by student. Now an instructor, that's me, wants the same question answered please. How can we alter the Classroom in a Book CS5 Flash Catalyst tutotial files in Flash Builder to open in CS5.5?

I will look into it. My CIB is at home, so it will be later today before I can investigate.
Also you might want to add an additional book to the course:
Quick Guide to Flash Catalyst: A Designer’s Guide to Visual Development By Rafiq Elmansy has been published by O’Reilly Media.
It will cover the changes from 1.0 to 5.5.
Chris Griffith
Adobe Community Professional

.nrw files will not open in cs5?

why won't nrw files open in cs5?

Because your camera is too new for your version of Camera Raw.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Mylenium

PS CC files will not open in CS5`

I have edited jpeg files on my company laptop using PS CC. However, I cannot open these same files using my PS CS5 (on my personal computer). I have tried saving them as TIFFs, PSDs with the same results. All show an * after the extension when veiwed on my home computer (ex: .jpeg*).
I cannot figure this out. Any thoughts?
Bob

I don't know why * is being appended to your extension. That would cause problems opening the file unless you remove it.
I would have your IT check that company laptop out. No PC should be renaming the extension.
In Photoshop CC, go to Edit > Preferences > File Handling and look at the settings.
Choose "Maximize File PSD and PSB Compatibility" and set it to Always.
Gene

.ai Files will not open when Illustrator CS5.5 is already launched

Greetings,
I have a user using Windows 7 Pro 64-bit having issues with Adobe Illustrator CS5.5. When the user attempts to open .ai
files stored on her local machine, the files will not open if Illustrator is launched. It will show an hour glass briefly as it is
about to open, and then nothing happens. If she closes Illustrator and tries to reopen the same file, it will launch Adobe
Illustrator and the file will open. She can also open files through illustrator. It just wont open .ai files when illustrator is
already launched. This is happening when she is running illustrator as an adminitrator, and as well as when she is not an adminitrator. Any ideas?

Any specific security tools running? Team/ workflow management software? Virtual desktops? License managers? Sometimes this stuff simply blocks local ports or wants files to be opened from within once certain things are running... Otehr than that this could be something with group policies or mundane user privileges issues with different contexts, i.e. your AI also has permissions for a specific server-side user/ policy, which the local user otehrwise doesn't have and then it's not allowed to open files into that secured loop...
Mylenium

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

You're welcome! It's usually CS5 and below that has the ACR update problems.
What counts is that you are back in business.
Gene

I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12 file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

Change browsers. See what happens.
Be well...

PDF files will not open in a Safari (v 6.0.5) browser window

PDF files will not open in a Safari (v 6.0.5) browser window, OS 10.8.5. Version 11.0.04 Adobe Reader and Plug-ins installed. Both local and internet files do not load. What is happening here?

Ok. I reloaded v 11.0.04 of Adobe Reader after quiting Safari 6.0.5 . Then deleted the 2 plug-ins AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin . Relaunched Safari and tried to read a pdf from a repository at the URL mentioned in post 10 . The file was loaded and displayed correctly. Also a pdf file from my local disk store displayed nicely as well. What I do not understand is that there is no listing of an Adobe plug in /Library/Internet Plug-Ins , nor does Safari list any Adobe plug ins. So in that case this means that plug-ins for the display of pdfs in Safari windows are no longer needed!
Adobe Reader version 11.0.04 is now working for me.
Thanks for the help and the solution C.F.McBlob

Pdf and vector files will not open in Adobe Illustrator after Yosemite Update

I updated my OS on recommendation from apple. Pdf and vector files will not open in adobe illustrator now. Am i using the latest OS?

Linda Feltner wrote:
> I cannot import or open vector files in Freehand 10. I
just get large
> Xs instead of the image. I have a MAC OS 10.3.9,
Freehand 10. I'm
> trying to import some small files that are either .ai or
.eps files
> (all are vector) that open fine in Illustrator 10 (so I
know they
> work), but I can't use them in that program. I've tried
adjusting in
> Freehand Preferences the 'convert editable EPS files" ,
on and off. I
> tried adjusting the 'Embed...." selection on and off.
Can anyone tell
> me what thing I'm doing wrong. I have two files, they
are map
> boundaries, that need to scale and adjust their color
and line width
> over an aerial map. This can't be difficult, but I must
be
> overlooking something. Many thanks in advance. Linda
>
Freehand can't convert EPS files into editable vectors. I
usually run
EPS files through Illustrator and then into Frehand. If you
don't have
Illustrator you can convert the EPS into a PDF and that
Freehand will
sometimes convert into editable vectors (though it does
involve a lot
more clean up than going through Illustrator.)

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

DNG Converter is FREE. Yes, really. No subscription needed.
- Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
- Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
See here for manufacturers who do (it's an old list, but you get the idea):
http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
- Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
Ask yourself why other manufacturers don't use a documented backwards-compatible format.
- Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
"Poor Planning on your part does not constitute an Emergency on my part."
- I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

A Pages file will not open due to index.xml not found, what is up with that?

I recently saved a file on Pages 5.5.2. on my IMac hard drive. Now I find that on attempting to open it the file will not open due to index.xml not found. Hoe do I correct this?

I have this issue, as well - although perhaps in a different content. When I try to open a file I created in the previous version of Pages, I will frequently (but not always), received the "index.xml not found" message. I am very concerned that I may lose access to some of these files. The old Pages icon is still on my dashboard, although I've downloaded the new Pages (that icon only appears when I open a new document). I thought I needed to upgrade the old documents to the new Pages, but this didn't work. Does anyone have any ideas? And, I'm not a techie - so you'll need to break it down for me.

.mov file will not open in FCP X?! codec unavailable? help!

I am trying to edit a short .mov file in FCP X. It was sent to me via YouSendIt. Once it has completed downloading, a message reads:
" The document “S-T3RRA Video Heads by FLOOD(1)-2.mov” could not be opened. A required codec isn't available. To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More. "
When I click tell me more, Apple provides me with some additional media support for QuickTime, however I should not need this for a .mov file correct? The file will not open in FCP X or QT. Any ideas? Suggestions? Was this file incorrectly exported by the creator?
Help!!
Thank you!
Diego Lopez-Videla
Houston, TX

Yes, it will be encoded using a codec that's not on your system.
That is a common misunderstanding with .mov - it's not a format, it's a container.
It basically contains video & audio streams that may be mp4, mjpeg or just about anything.
In this case, the "anything" is what we need to find out, so we can work out what you need to read it.
You could try opening it using VideoSpec - it will tell you everything.

Mov file will not open on Premiere CS6 for Windows

I am a student working on a project that I started in university on an Apple Mac desktop. I decided to carry my project back home to continue with it on a laptop which is Windows...however the Mov. files will not open up on premeire pro and it is really frustrating as I have done a lot of work. How can I import these videos without losing any work or having to start again?

Quicktime X does NOT work http://forums.adobe.com/thread/888722
-Premiere Pro REQUIRES Quicktime 7 won't work with Quicktime X

My InDesign file will not open! URGENT!

Hi all,
One of my InDesign files will not open, when I attempt to open it, I get a message saying "Cannot open file, Adobe may not support the file format, a plug-in that supports the format may be missing or the file may be open in another application." I'm not exactly sure what the issue is as I opened another one of my files previously and that one is still working fine. I'm using Windows 7, if anyone can help me I would really appreciate it.

Right-click the file and choose Open With, then notepad, and post a screen capture of the first dozen or so lines of text.
You can embed an image in a post using the coamra icon onthe web page, like this:

D800 Files will not open in CS5

Similar Messages

Maybe you are looking for