D810 .NEF images not recoginzed Photoshop CC updated

I have Photoshop CC, I updated to camera raw version 8.7.1.311. According to the updater my software is up to date. I have also updated my video drivers. I am using a Mac, OSX 10.9.5. Any ideas? Thanks

Are you sure Camera Raw is actually installed? Camera Raw plug-in installer
Benjamin

Similar Messages

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?

Camera Raw plug-in | Supported cameras

Installing system updates and getting error saying photoshop is unavailable try again later. Can't upload raw NEF images until I install this update. Help!

I am using photoshop elements 9 and need to upload a session of photos I just took in NEF raw, but it gives me an error saying it cannot open the photos. I read in another forum that this probably means I don't have the latest update installed. I try to get the update and it gives me an error saying that photoshop is unavailable and to try again later. I am on a time crunch and need to figure this out asap if possible! Any help is greatly appreciated!

update manually,: http://www.adobe.com/downloads/updates/

PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get Photoshop CS3 error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Adobe Bridge at all. What am I doing wrong?

Hey,
Before I purchased, let me get your thoughts on another option that just occurred to me which involves:
1)Editing my D810 NEF files in LR 5.6, which I have, then exporting/saving the edited files as JPEGs.
2) Doing any additional editing, as necessary (i.e. that might require layering or selections..etc) , with the JPEGs with Bridge or PS CS3.
This method wont involve any additional software purchase now.. right? Am I missing anything. here? Since my final output to my customers are JPEGs any way, wont this work? Will I be at any disadvantage. Am I missing anything. here?
From: ssprengel <[email protected]>
To: charles cash <[email protected]>
Sent: Monday, October 6, 2014 9:49 AM
Subject: PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue
PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue created by ssprengel in Adobe Camera Raw - View the full discussion
You can buy it from here:
http://creative.adobe.com/plans
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6795004#6795004
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Camera Raw by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Camera Raw 4.6 Update & Nikon D810 NEF File Issue

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?

8.6 Camera Raw plug-in | Supported cameras

CS5 (camera raw 8.7.1) not reading Nikon d810 NEF files

I just purchased Nikon d810. I have CS5. All updates are current and I've downloaded Camera Raw 8.7.1 but Photoshop/Bridge still can not read NEF files. What am I doing wrong?

If you have Windows, go into the Control Panel > All Items > Autoplay
Uncheck Autoplay (I keep it off because I don't want Windows doing anything automatically, I like to make that decision).
Next to the Pictures category, set the drop-down menu to "Take no Action".
Then when you insert a SD card, Bridge would see it under "Computer", but you would have to double-click to open it, and go to the folder that has the pictures.
One warning: Don't do any processing off an SD card. Make copies and put them in a folder on your hard drive. Too much can go wrong with flash memory and it's unwise to work off it or an external drive. You want backups of your valued photos.
I don't think Bridge CS5 auto-imports Photos from SD cards, so you are safe there.
Gene

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

GoPro Camera Raw Lens Profile settings not working for image sequence in Photoshop/AE/Premiere CS6

Hey Everyone,
I'm in need of assistance in either Photoshop CS6, After Effects CS6, or Premiere Pro CS6. I just installed the trials after seeing Russell Brown demo the GoPro Lens Profile correction feature in Camera Raw. Basically what I'm looking to do is make adjustments (in Adobe Camera Raw) to a series of still images (shot with the time-lapse mode on the GoPro) and then either export those stills through Photoshop or Bridge to a temporary movie file that will be imported into a timeline (with other video clips), or import the JPG files (with Camera Raw settings) directly into After Effects or Premiere as an image sequence. The latter would be preferable as it'd avoid the extra step of having to render the intermediate/temporary movie file.
Right now, my current workflow for GoPro time-lapses is:
          - use Bridge CS4 to do basic color correction on the still images
          - save those as TIF files
          - run the TIF files through a custom script to have Hugin 2012.0.0 (open source pano stitcher) remove the fisheye distortion
          - open the new TIF image sequence into QuickTime Player 7 (Pro)
          - export the image sequence as a QuickTime movie file
          - import the movie file into Premiere Elements 10 to place on a timeline with other video clips (as Premiere Elements can't handle the sequence(s) of thousands of still images without crashing)
If I can go directly from Bridge to a timeline, it'd save a lot of processing time (and it'd be much nicer to preview the images in Bridge without the fisheye distortion)!
I can prepare the GoPro JPG files through Adobe Camera Raw in Bridge CS6, though when I go to import the JPEG image sequence into Premiere Pro CS6 or After Effects CS6, none of the Camera Raw settings are applied. If I export the Camera Raw files in Bridge CS6 as DNG files (a step I'd really prefer to avoid) and then import the DNG image sequence into After Effects CS6, the Camera Raw settings are applied except for the Lens Profile settings -- I can pick other cameras but not the GoPro lens profiles when the DNG image sequence loads in After Effects. It also appears that once I open the DNG files in After Effects CS6, I can no longer access the GoPro Lens Profile in Adobe Bridge CS6 -- the list changes to the same list I get in After Effects. Premiere Pro CS6 doesn't let me import the DNG files at all. I've also tried to import the JPG files (as well as the converted DNG files) into an image sequence in Photoshop CS6, though it doesn't allow me to do so (the Image Sequence checkbox is grayed out after I apply the Camera Raw settings in Bridge).
There could be an issue going on with different Camera Raw versions. I didn't have Premiere Pro CS6 installed during my initial testing, though now do notice that the Camera Raw dialog in Bridge CS6 only lets me choose compatibility up to "Camera Raw 7.1 and later" when I choose to export the files as DNG. I thought Camera Raw 8.2 was an option there a couple days ago when I only had installed Photoshop CS6 and After Effects CS6 (though am not 100% certain).
Please let me know if there is some workaround to get the GoPro lens profile Camera Raw corrections applied in an image sequence in one of the Adobe CS6 products (without having to export the files as temporary TIF or JPG files out of Camera Raw). I'd greatly prefer to shorten my current workflow for these files. (I just updated the CS6 trials and have tested all three programs again though I still get the same results described above.)
Does Lightroom 5 have any option to export Camera Raw image sequences as movie files (or any other feature that might help in simplifying my current workflow)? I can't install the trial right now as it's not compatible with OS X 10.6.8. I'd consider upgrading OS X if I knew Lightroom 5 would do what I need, though am waiting for any potential color profile issues to be resolved in OS X 10.9.
I can open the image sequence in Photoshop CS6 if no Camera Raw settings are applied and then use the Lens Correction Filter to apply the GoPro Lens Profile settings, though I really prefer the Camera Raw interface in Bridge for tweaking image settings. As soon as I apply Camera Raw settings to the first image, Photoshop CS6 grays out the image sequence checkbox.
If there isn't a way to take Camera Raw files straight from Adobe Bridge to a timeline, I may stick with my current workflow using CS4 and see what I can do to better automate some of the steps as the TIF export in Bridge, fisheye distortion removal in Hugin, and render in QuickTime Player all take quite a while. I won't mind waiting for all the processing if I can set it and check back on it in later the next day when it's fully complete. Is there a way to have Adobe ExtendScript execute an external shell command (i.e.: a command I could type into the bash shell in Terminal in OS X)? If not, is there a way to call/run an ExtendScript script from the command line and pass a parameter to it that my custom script could use?
Thanks in advance,
Mark

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

D810 images not displaying properly in preview app

So when I open an image like something I took from Photo Booth from Finder in Preview app, it loads fine. However, when I open a high res image JPG from my Nikon D810, the image loads initially, then quickly blanks out to all white. If I use the magnifier tool, it does show me magnified portions of the image, but the whole image won't show. Is there a maximum size limitation with preview app?
BTW, I don't think this repro'd before I updated to 10.10.3 (was 10.10.2). Is this an issue with Apple decommissioning iPhoto?

You could try some of these options here.
Mac OS X: How to troubleshoot a software issue - Apple Support
OR Follow these steps as a general software issue troubleshoot
finder > go > ( alt key ) > library
caches (delete all files not folder)
cookies (delete all files not folder)
launch agents (delete all files not folder)
saved aplication state (delete all files not folder)
finder > go > computer > mac hd > library
caches (delete all files not folder)
launch agents (delete all files not folder)
launch deamons (delete all files not folder)
then > restart
If neither of these help then contact apple support directly, unless anyone else can help on here.

Aperture 2 not importing .nef images from scanner... works in LR2 though.

Hi,
I have been looking at Aperture 2 and Lightroom 2 recently to see which one I'd like to use long term. I generally feel more comfortable with Aperture and it's controls (the sliding scale controls vs increase/decrease buttons) and Aperture's auto grouping of master and adjusted virtual copies but while Lightroom imports the range of image types I have, Aperture refuses to display the .nef images I have from negative scans. I can see the thumbnail but the preview is the "Unsupported Image Format" box. I have Camera RAW 5.2 installed on the computer and Photoshop CS3, which also can't open my .nef files.
As background, I have a Powermac G5 dual 2.5GHz with 3.5GB ram running OSX (10.5.6). I'm scanning from a Nikon Super Coolscan 4000ED using Nikon Scan 4 at full resolution (4000dpi) to 14 bit .nef format raw files (~130MB/image). The Aperture version is 2.1.2
I can't figure out weather it's something with Aperture or something with my system, considering lack of PS support (even after swapping in the latest Camera Raw plugin into the System Library).
Anyone have any thoughts? I'd like to be able to get this sorted before I have to make a definitive choice.
Thanks

@MacDLS-
It was really either 16-bit Nef or Tiff and it was a legacy decision that I've just lived with. I get that there are differences between a Camera Nef and a Scanner Nef as the camera imprints metadata in there that is irrelevant in the case of the scans and that the Scanner is recording R, G and B data for each pixel but whatever. I gathered that if I used Tiff, my saves would be permanent, similar to jpeg, whereas Nef is Raw-like in the sense that I can reverse adjustments to the master, which is more appealing than duplicating every Tiff for a mater copy and an adjustment copy (+ other adjustment copies). But I could easily be misguided, I'm no pro.
Another consideration was that many of these scans are unlikely to see future rescans, so it's not like I am of the mindset that I will just be rescanning stuff with the next super-scanner of the future down the line. These are the archival digital negatives as far as I'm concerned.
As far as being only useful in Nikon software, they do work fine in Lightroom 2 and...
I realized CameraRaw version 5.XX is CS4 specific and was the limiting factor for Photoshop. I reverted to the CameraRaw 4.6 plugin and everything was gravy as far as Photoshop... still no luck with Aperture 2 though.
So Nikon Scanned Nef files, go for Adobe software, no go for Aperture... unless I'm 'doing it wrong' ???

Is there a patch to enable Photoshop Elements 10 to import NEF images from a Nikon 7100?

I bought a Nikon 7100. The NEF files taken with the Nikon 7100 cannot be imported into the organizer. The error message is "the files selected to import did not contain any supported file types. The file is damaged or is in a format that cannot be included in Elements Organizer." The file is not damaged as the Nikon NX 2 program had no problem importing the images. Elements 10 was able to import raw NEF files from my D90 with no problem. Is there a patch to enable Elements 10 to recognize the format of Nikon 7100 raw NEF images? If not, is there another photoshop product that will import NEF images from a Nikon 7100?

For the 7100 PSE11 or PSE12 will work as support was added in ACR 7.4.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Updated to 4.3 and D600 NEF Still Not Working

I updated to 4.3 today and I was still unable to import my D600 NEF/RAW files. After I updated, I rebooted and it seemed like I could actually import the D600 NEF files. However a few moments later, somehow those images were no longer in my catalog/library and when I try to reimport them again it says the files are not compatible and no preview was available during the import screen. Any thoughts?
Win 7, 64-bit

I don't know what you did but Lr 4.3 works perfectly with the NEFs from my D600.
Have you - previously to importing them into Lr - transfered them to your hard drive with Nikon View?
There have been reports that this renders the NEFs incompatible with Lr.
Try importing the NEFs directly from Camera / Memory card into Lr, or if you prefer to put them on the hard drive first, use your OS for that.

Nikon D810 NEF's Open in ACR But Not PS CS6

I just installed ACR 8.7.1 and can view and adjust Nikon D810 NEF files but when I press "OPEN" (from ACR) to begin work in PS CS6 they will not open. CS6 does launch but I dont see the NEF file. My Canon CR2 and Fuji RAF files open fine in in CS6. Any ideas?

Which operating system are you using? = OSX 10.8.6
Your using camera raw in Bridge CS6? = Yes
What happens if you use File>Open in photoshop cs6? = Rebooted my Mac and all is well.

Nikon D810 .NEF (small) files converted by DNG Comverter 8.6 is not recognised by Lightroom 5.5 or CameraRaw 8.6

D810 NEF (small) files converted by DNG Comverter 8.6 is not recognised by Lightroom 5.5 or CameraRaw 8.6. The normal NEF files are visible after conversion. Is there a way out to get the converted DNGs read in LR or ACR?

No there is not, but as of yesterday, Adobe knows that the 9MP small-raw files don’t work and will likely fix in the final release. Until then you need to shoot full-res 36MP images.

Adobe Bridge CS3 not opening Photoshop Image Processor

I selected one, four, and multiple pictures in Bridge to reduce the file size of jpgs. I went to Tools > Photoshop > Image Processor. Nothing happened. Photoshop did not open. That got me to thinking that sometimes while I am in Photoshop Bridge won't open either. Any ideas on resolving issue of "Bridge not opening Photoshop Image Processor" would be greatly appreciated.

Hello Curt Y, Everything is checked in the "Startup Scripts," including Bridge (twice) and Photoshop (twice). Not sure why duplicate entries but there are.
If you mean that you have two of the same versions (both CS3) in there that indicates there is something wrong with your install
If you have any suggestions regarding being able to access the Image Processor to resize pictures and such without first opening Photoshop, I'd greatly appreciate it. If not, the work around will have to suffice.
My first goal would be to reset the preferences for both PS and Bridge and then try again
see also this KB document, section preferences reset:
http://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html
And inhere also info on how to retrieve your path for cache to manual delete it.

D810 .NEF images not recoginzed Photoshop CC updated

Similar Messages

Maybe you are looking for