D9854 still HD-SDI output with no proper services input ASI.

Hi There,
I have several D9854 in use.
When the input signal is lost,(ASI services or RF) there is still a signal avalible at the output M1 and M2.
And the CHO after the Decoder wil not switch.
I already of course changed the user settings : OSD Banner in "disable" and Action on Loss of input in "No output"
What am I doing wrong?
Best regards,
Hans van Eijndthoven

Hans;
Which output are you looking at? If you are looking at the analog video out, you should be able to drop the Vsync under an alarm condition. From a web browser, go to System Settings - Alarms - Setup. ENABLE the 'Enable Video Cutoff on Alarm Condition' option.
Fred

Similar Messages

D9854 still HD-SDI sync output with no proper services input ASI or L-Band.

Hi there,
we are using several D9854 receivers in our headend.
Some with L-band input and some with a ASI input
The problem I have, when there is no input ( L-band or ASI) there is still a sync avalibel at the output and the ChangeOver is not switching too the backup unit.
I already changed the user settings "action on los of Input : no Output"
Are there more settings hidden?
Best regards.
Hans van Eijndthoven

Hans;
Which output are you looking at? If you are looking at the analog video out, you should be able to drop the Vsync under an alarm condition. From a web browser, go to System Settings - Alarms - Setup. ENABLE the 'Enable Video Cutoff on Alarm Condition' option.
Fred

I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my passwor

I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my password, which it won't accept because it's an invalid username.

I had this same issue and got it resolved very simply when I contacted Apple SUpport
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and sign into your infomation
> Go to Manage apple id and primary email address
> Change it to the old apple id that your device is asking for
> Save changes
> Go to Settings > iCloud and sign out of the infomation
> Go back to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
> Change it back to the correct apple id
> Go to the email address adn reverify the apple id
> Sign back into iCloud on your device
> Smile
Article to back up my statement http://support.apple.com/kb/TS5223

How to Create and adjust masks with SDI output or Dual monitor output activated?

Hi all Speedgrade community.
For me one of the biggest problems I constantly encounter is managing masks within speed grade.
The tools are great, but if your using and external reference monitor for grading there is no way you can manage
masks and see what your doing on that "external" screen. Is there a way of activating dual screen or ddi output and keeping
the viewer active in the GUI?
When I know I'm going to be managing a lot of fine tuning grading, I usually always switch to Scratch or Resolve, and that breaks my Adobe CC round tripping workflow
AE<-->PP<-->SG
Thanks for any help.
KR
Leigh
iMac 27"
Aja IO 4K
DreamColor Z27X
HDLink 3D DisplayPort
Wacom Intuos

Hi Fran
Thanks for your response.
Is it just me, or does the pointer, when sent over to the SDI output, not respond as well
as when it's on the GUI?
Anyway, I'm quit confident we'll see an update to the way video is routed within Speedgrade
in a near future.
Leigh

SDI Output from Speedgrade

I have a blackmagic design decklink SDI card. Works ok with Premiere, but I don't see any way to output a signal from speedgrade. (There's an SDI out option if I have a specific nVidia quadro sdi card, but I don't have that and I'm not going to buy it just so I can use speedgrade.)
Kind of hard to grade without a proper SDI output to a calibrated monitor... Am I missing something or is this feature just not part of speedgrade?

I'm currently deciding between configuring a Speedgrade and DaVinci Resolve system. I was hoping that Speedgrade would work with my Kona 3 card. As the Davinci requires buying the decklink card as well as two graphcis cards.
I realize that a Quadro 4000 will speed performance up. Wondering if the Quadro 4000 can be configured to do SDI out through by adapting the displayport output?
Would be great if the Adobe Speedgrade web page made the SDI monitoring workflow more clear. So far working through the trial,it looks like great software.

PDF Output with javadoc

Somebody once asked how to create PDF output with javadoc, so here's some work in progress:
I am currently creating a PDF doclet which creates directly PDF output from javadoc. It's still in alpha stage, because it does not yet create an index or navigation frame (which is mandatory for the PDF to be useful), and most HTML tags are not yet interpreted. But that's gonna improve over the next few weeks.
http://sourceforge.net/projects/pdfdoclet
Bye,
Marcel

Hai Marcel,
How to run this pdfdoclet?
I tried like:
javadoc -doclet com.tarsec.javadoc.pdfdoclet.PDFDoclet -docletpath d:\For_PDF_Doc\itext-0.92.jar;d:\For_PDF_Doc\pdfdoclet.jar *.java
And the result is:
Loading source file Test.java...
Constructing Javadoc information...
pdfdoclet: >> OPTION 0: -doclet
pdfdoclet: >> OPTION 1: -docletpath
pdfdoclet: Content completed, create index
pdfdoclet: *** PDF DOCUMENT api.pdf COMPLETED ***
Nothing is there in api.pdf!
anu

[SOLVED] Faulty video output with mpv/mplayer, vaapi

Hi,
I have a HD6870 with the proprietary catalyst drivers installed, and the packages needed to enable vaapi. The problem I have is that every video application like mpv, mplayer or whatever refuses to give me correct video output with vaapi. mpv for example gives me these errors, depending on filetype:
avi:
(+) Video --vid=1 (h264)
(+) Audio --aid=1 (mp3)
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
Using hardware decoding.
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
AO: [alsa] 48000Hz stereo 2ch s16
[vaapi] Decoder profile 'VAProfileH264Main' not available.
[ffmpeg/video] h264: decode_slice_header error
[ffmpeg/video] h264: no frame!
Error while decoding frame!
Error using hardware decoding, falling back to software decoding.
mp4:
(+) Video --vid=1 (*) (h264)
(+) Audio --aid=1 --alang=eng (*) (aac)
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
Using hardware decoding.
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
AO: [alsa] 48000Hz stereo 2ch float
xvba_video: XVBA_CreateDecode(): status 2
[vaapi] vaCreateContext(): unknown libva error
[ffmpeg/video] h264: decode_slice_header error
[ffmpeg/video] h264: no frame!
Error while decoding frame!
Error using hardware decoding, falling back to software decoding.
wmv:
(+) Video --vid=1 (wmv3)
(+) Audio --aid=1 --alang=eng (wmav2)
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
Using hardware decoding.
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
xvba_video: XVBA_CreateDecode(): status 2
[vaapi] vaCreateContext(): unknown libva error
xvba_video: XVBA_CreateDecode(): status 2
[vaapi] vaCreateContext(): unknown libva error
[ffmpeg/video] wmv3: decoding to AV_PIX_FMT_NONE is not supported.
Could not open codec.
Error initializing hardware decoding, falling back to software decoding.
mpv doesn't crash, it just falls back to software decoding and gives me a grey screen when it's not fullscreen, and when it's fullscreen it tears a lot and flashes random grey stripes everywhere - sound still works fine. Any ideas on what can be at fault here? The only video output that gives me an OK image without tearing or anything else is x11, but it's really slow.
vainfo gives me this:
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
vainfo: VA-API version: 0.37 (libva 1.5.1)
vainfo: Driver version: Splitted-Desktop Systems XvBA backend for VA-API - 0.8.0
vainfo: Supported profile and entrypoints
VAProfileH264High : VAEntrypointVLD
VAProfileVC1Advanced : VAEntrypointVLD
Last edited by Median (2015-06-07 10:01:38)

Gusar wrote:
Uninstall libva-xvba-driver and do
export LIBVA_DRIVER_NAME=fglrx
Now try vainfo again. Instead of "Splitted-Desktop Systems XvBA backend for VA-API - 0.8.0" it should say "AMD MMD 1.0" or something like that.
Thanks, now VA-API at least gives me an output - but the video just flashes in fullscreen. I think another thing to notice here is that the video only plays correctly (gives me an output), if I play it on monitor 1 (I use three monitors) - but I can't get rid of the screen flashing.
EDIT: Fullscreen only flashes when I use mpv, with smplayer (+mpv) it works ok - but it lags from time to time. mplayer-vaapi won't give me a smooth playback either with -vo and -va as vaapi, and the screen also flashes when I'm using it.
Any idea on what's wrong? Is it my use of three monitors? This is really, really annoying.
Last edited by Median (2015-06-06 18:51:40)

Firefox not displaying swfs with their proper dimensions

Some instances of Firefox are not displaying swf files with their proper dimensions. When the same .html and .swf combo is loaded on another domain, different dimensions are displayed. I'm not using swfobject or any other DOM manipulator to get the swf on the page. I'm using the standard wrapper that Flex generates with object/embed tags.
The dimensions are 950x700. I wonder if the large size is part of the problem. I'm not going for any full screen effect.
I've tested with and without css declarations. I've tried using swfobject. I've created a brand new project empty project and when I publish that, the dimensions are still off.
== URL of affected sites ==
http://www.webwebwebsite.com/badfit/BadFit.html

That image doesn't seem to be working in Firefox 3 and 8 (works in Firefox 9 and later).
It works if I save it as 24 bit instead of 32 bit.
<pre><nowiki>data:image/x-icon;base64,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</nowiki></pre>

Dual 3G SDI Output on the C500

Hey everybody,
our university recently got a C500 paired with a KiPro Quad Recorder.
I was under the impression, that I need both 3G SDI Outputs on the C500 to capture 4k video (25p, as we're in germany) on the KiPro Quad, however the KiPro will accept 4k RAW as an input only when it's set to 1 3G SDI Input. When I connect both 3G SDI Outputs of the C500 to the first to SDI Inputs of the KiPro and set input on the KiPro to SDI 1-2 RAW, it won't record.
So basically I'm wondering when I would actually need both 3G SDI Outputs (except for feeding two recorders at the same time), let alone 4 Inputs on the KiPro Quad.
I hope someone can shed some light on this, I couldn't find any real answer anywhere.
Thanks in advance!

Hello Fuchur86!
Welcome to The Canon Forums, and thank you for your post!
We appreciate your participation, however we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.
If you live outside the United States, please http://www.canon.com, and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
You will want to contact support in the country of intended use of the non-US printer to determine which inks are used in that printer.

Dual SDI output

Hi,
I am currently using Speedgrade with an Nvidia 4000 SDI card for stereoscopic output to a projector with dual SDI inputs. I understand that people can now use 3rd party (thought I've only heard of people using Matrox) io cards.
I searched Adobe's site for any info regarding 3rd party io cards with speedgrade and there's something about Mercury something or other but I can't find any specs or recommended cards. Does this really work now? Is it buggy? Can it do true stereoscopic (dual SDI)?
I'm looking for more info regarding this so if there's a good info source for this I'd love to look it up.
Thanks for any answers to my questions or just feedback regarding this.
-Cablet
p.s. Hoping to move to mac from windows if possible yet keep the dual SDI output.

I'm not sure about 3D, but with the 7.0.1 update SpeedGrade supports AJA, Matrox and Bluefish boards as Dual Display using "Mercury Transmit"(meaning those cards display the image), so that includes SDI on mac if the card has that option. I don't know if the Q4000 with SDI daughterboard works on Mac, oficially it is not supported. Do note that Apple apears to be moving away form PCI-slots, in favour of Thunderbold.

Excel output (with graphics)

Hello,
I am using Oracle reports 10g 1.2.0 version.
We need to generate oracle reports in Excel format ("real" Excel, not delimited text) with tabular data and
also graphics.
I used desformat=spreasheet. But is is giving only one worksheet.
I've found the "Output to Excel with Oracle9i Reports"
demo but the Excel template in the demo is very simple and doesn't have graphics.
Then I've found the following:
http://otn.oracle.com/products/reports/htdocs/getstart/examples/excel_output/result/excel.jpg
a) The above site has excel output with multiple worksheets.
which is similar to what we need but I wasn't able to find related source (excel_emp.jsp).
b) Using jsp if we can ahieve multiple worksheets with grapahics, please provide us examples.
c) http://www.oracle.com/technology/products/reports/htdocs/getstart/demonstrations/excel/index.html --This site is not working to find the demo.
Could you please help me in this?
Thank you for any help.

carla,
the example you mentioned uses the JSP web source that is only available in oracle9i reports.
in theory you can create any excel output. it is just a matter of creating the template and then adding the reports tags to populate it with data.
you could then use reports' URL engine to produce files from this output.
there are certainly ways to do it, but they are only available in oracle9i reports (9.0.2 and higher)
regards,
philipp

Trying to rebuild my iphoto library from time machine backup and it still says 0 restored with a grey screen and the circle. How can i restore my library?

I just bought a new Macbook pro and i tried to rebuild my iphoto library from a time machine backup on an external hard drive. Even after pressing command+option when starting iphoto and selecting rebuild library from automatic backup, it still doesn't work with the grey screen with the white circle and a little window that says 'rebuilding library: 0 versions restored'. I also tried to make a copy of my iphoto library but that did not work either. how can i restore my iphoto library or at least gain access to my photos?

Your question is not clear
Rerairing or rebuilding the iPhoto library never involves using Time Machine in any way
TM is a totally seperate program and you can "restore" a file (including the iPhoto library) from the past using TM - you launch TM and go back to the time you want and select the file (or folder or package) you want and click restore - it probably is best to keep the current one until you are sure everything is good
LN

HT1338 i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created.

i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created. As i dont have the access to the earlier id anymore.

You cannot. The apps are assigned to that Apple ID and there is nothing you can do to change that. You could choose to download them again with the new Apple ID, any paid apps will need to be purchased again.
Hope that helps.

I have an old IPOD Touch and just bought a new Nano. If I download the latest version of Itunes for my Nano, will I lose all of my songs stored in my old version of Itunes and can I still use my Touch with the new version?

I have an old IPID touch and just bought a anew Nano. If I downoload the latest version of Itunes for my Nano, will I lose all of my osns stored in my old version of Itunes and can I still use my Touch (with my current songs on it) with the new version of Itunes? In the past when I downloaded a new version, I lost my songs on my Touch. Thank you for any help any one might offer.

i am no shure but go on Itunes store in shortcuts and try to find 'purchasse'
good luck

Is it possible to create a Webservice in BI which takes XML as an input and gives PDF as output with an additional requirement that Siebel expecting the XSD from BI to send data in the BI requested format

Is it possible to create a Webservice in BI which takes XML as an input and gives PDF as output with an additional requirement that Siebel expecting the XSD from BI to send data in the BI requested format. Siebel wants to send the data as xml to BI but not sure of the BI capabilities on giving WSDL embedded with XSD (input is a hierarchical)

Hi All,
I am able to fulfil above requirement. Now I am stuck at below point. Need your help!
Is there any way to UPDATE the XML file attached to a Data Definition (XML Publisher > Data Definition) using a standard package or procedure call or may be an API from backend? I am creating an XML dynamically and I want to attach it to its Data Definition programmatically using SQL.
Please let me know if there is any oracle functionality to do this.
If not, please let me know the standard directories on application/database server where the XML files attached to Data Definitions are stored.
For eg, /$APPL_TOP/ar/1.0/sql or something.
Regards,
Swapnil K.

D9854 still HD-SDI output with no proper services input ASI.

Similar Messages

Maybe you are looking for