DA client getting with error Main mode SA assumed to be invalid because peer stopped responding.

Facing one issue with only DA client , it connects to Direct access for few seconds and then get disconnected.
Looking at error on Event viewer I see below error
Any help appreciated certificate looks ok on client not sure why IPSEC is still failing.
Main
An IPsec main mode negotiation failed.
Local Endpoint:
                Local Principal Name:         
                Network Address: fd03:c8e4:6dc5:1000:65c3:ec29:19db:d27
                Keying Module Port:           
500
Remote Endpoint:
                Principal Name:                   
                Network Address: fd03:c8e4:6dc5:1000::1
                Keying Module Port:           
500
Additional Information:
                Keying Module Name:         IKEv1
                Authentication Method:      Unknown authentication
                Role:                                      
Initiator
                Impersonation State:           
Not enabled
                Main Mode Filter ID:           
0
Failure Information:
                Failure Point:                        
Local computer
                Failure Reason:                     
No policy configured
                State:                                     
No state
                Initiator Cookie:                   
9859f832aff8f6c2
                Responder Cookie:              
0000000000000000
Quick
An IPsec quick mode negotiation failed.
Local Endpoint:
                Network Address: ::
                Network Address mask:       0
                Port:                                       
0
                Tunnel Endpoint:                 
fd03:c8e4:6dc5:1000:65c3:ec29:19db:d27
Remote Endpoint:
                Network Address: fd03:c8e4:6dc5:7777::405a:e2f2
                Address Mask:                      
0
                Port:                                       
0
                Tunnel Endpoint:                 
fd03:c8e4:6dc5:1000::1
                Private Address:                   
0.0.0.0
Additional Information:
                Protocol:                               
0
                Keying Module Name:         AuthIP
                Virtual Interface Tunnel ID:  0
                Traffic Selector ID: 0
                Mode:                                    
Tunnel
                Role:                                      
Initiator
                Quick Mode Filter ID:          
148975
                Main Mode SA ID: 9
Failure Information:
                State:                                     
Sent first (SA) payload
                Message ID:                          
3
                Failure Point:                        
Local computer
                Failure Reason:                     
Main mode SA assumed to be invalid because peer stopped responding.

my "Personal"
================ Certificate 0 ================
Serial Number: db275ae51a55dc55fbe5
Issuer: CN=Communications Server
 NotBefore: 3/27/2015 5:16 PM
 NotAfter: 9/23/2015 5:16 PM
Subject: CN=[email protected]
Non-root Certificate
Cert Hash(sha1): b3 1a 83 46 a7 3b 35 81 d5 b8 df 4a cf c7 b5 84 3d 16 4f 19
  Key Container = [email protected]
  Unique container name: c8d28464bd8e19954e01e055a437dac2_9a8ca7a5-b032-4abe-aa4f-78479e291b9e
  Provider = Microsoft Enhanced Cryptographic Provider v1.0
Private key is NOT exportable
Signature test passed
================ Certificate 1 ================
Serial Number: acf56029651a29985555bc204feec2906e0e623c
Issuer: CN=Token Signing Public Key
 NotBefore: 11/2/2014 1:10 PM
 NotAfter: 11/9/2014 1:10 PM
Subject: CN=8cb8436c5273712d
Non-root Certificate
Cert Hash(sha1): 96 40 a0 e3 d8 d3 a1 83 3d 7d 53 89 78 13 ec ea 14 57 59 e2
  Key Container = IDENTITYCRL_CERT_CONTAINER_781dc55f-39ad-4acf-908b-077a9f0892c0
  Unique container name: fa2317742ecd4995840a96d529ded279_9a8ca7a5-b032-4abe-aa4f-78479e291b9e
  Provider = Microsoft Enhanced Cryptographic Provider v1.0
Encryption test passed
================ Certificate 2 ================
Serial Number: 1ecfdba10000000711f6
Issuer: CN=certificates1.bentley.com, OU=IT, O=Bentley Systems Inc, L=Exton, S=PA, DC=bentley, DC=com, C=US
 NotBefore: 10/14/2014 3:00 PM
 NotAfter: 10/14/2015 3:00 PM
Subject: E=[email protected], CN= user name
Non-root Certificate
Template: 1.3.6.1.4.1.311.21.8.11654720.1572043.7097246.3836610.15498332.49.1051303.5974672, Bentley User
Cert Hash(sha1): 34 b0 4d a3 c0 ea 3f 91 c4 e8 1f bf bc a3 eb 8d 0e 13 71 3b
  Key Container = le-BentleyUser-b08f3f78-54cf-490e-9778-24c8c7bb9c0e
  Unique container name: fe0554406294c67f04d3b9898a803d95_9a8ca7a5-b032-4abe-aa4f-78479e291b9e
  Provider = Microsoft Software Key Storage Provider
Private key is NOT exportable
Encryption test passed

Similar Messages

  • When I try to copy pictures to my iphone 4s I get this error message: Cannot copy item. The device has either stopped responding or has been disconnected. Any help?

    When I try to copy a photo from my computer (windows 7) I get this error message: Cannot copy item. The device has either stopped responding or has been disconnected. Any help for this?

    Are you syncing the photos using Itunes?
    When you plug your phone into your PC, in Itunes under the picture tab you can sync photo and then choose the photos.
    Look here more detailed instructions
    http://support.apple.com/kb/HT4236

  • I have been exporting lightroom webgaleries to my iweb site without any problem.  Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - thoughts?

    i have been exporting lightroom web galleries to my iweb site without any problem.  Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?

    Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
    And you can continue to use iWeb for some time to come. The following will explain:
    It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    All of these features can be replaced with 3rd party options.
    I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken.  If I published directly from iWeb to the FPT server those two features continued to work correctly.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
    HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.

  • I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found."  I have uninstalled and reinstalled iTunes multiple times.  Am running Windows XP Svc Pack 3.  help

    I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found.  Reinstalling the application may fix this problem."  I have uninstalled and reinstalled iTunes several times with no success.  I am running Windows XP Svc Pack 3.  Help please.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99753)

  • HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

    I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • HT1386 I am trying to download ios 5.1.1 on my iphone from itunes and i get an error message that my iphone cannot be updated because the filmware is not compatible?  What do I do?

    I am trying to download ios 5.1.1 on my iphone from itunes and i get an error message that my iphone cannot be updated because the filmware is not compatible?  What do I do?

    iOS 5 is only compatible with the iPhone 3Gs and later...
    Updating to iOS 5   http://support.apple.com/kb/HT4972

  • I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

    I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • I can't install icloud on my pc i get  this error:the file 'AOSKit.dll' cannot be installed because the file cannot be found in cabinet file 'iCloud.cab'

    i can't install icloud on my pc i get  this error:the file 'AOSKit.dll' cannot be installed because the file cannot be found in cabinet file 'iCloud.cab'.this could indicate a network error, an error reading from the CD-ROM, or a problem with this package!  please help!!!!!

    “the procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.”
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    Does iTunes launch properly now?
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

  • I keep getting the error message "The operation can't be completed because you don't have permission to access some of the items."

    When I try and move an application to my application folder from the installer and when I try to empty the trash, I get the error message, "The operation can’t be completed because you don’t have permission to access some of the items."  This has only been an issue since I upgraded to Lion.  I'm using a July '07 white Macbook 2.16 Intel Core 2 Duo.  In my trash I only have an older version of a software that I updated (Divy).  The software I'm trying to install is Angry Birds Rio.

    Always use the same websites you are having problems with so you can monitor the changes.
    Try the reset for Safari:
    And for Firefox:
    http://www.ehow.com/how_6874158_keyboard-working-certain-websites-firefox.html
    Try logging in to the guest account as well to see if you have the same problems there, it might be a logging in issue.

  • I keep getting the error message: " You can't open the application "%@" because it may be damage or incomplete" when I try to install a software that I purchased.

    I have a typing software that I bought a while ago. I had installed it on an old pc but I just bought a macbook and I'd like to install it onto the new macbook, as I no longer use the old pc. When I open the installer, I get the error message: " You can't open the application "%@" because it may be damage or incomplete"
    Does anybody know if this is fixable or if I need to just buy a new disk?
    Thanks!!!

    I copy pasted this from the developers website for the minimum requirements of your device: Macintosh® OS X 10.4 – 10.5, PowerPC G4, G5 or Intel Core Duo processor, 800 MHz processor or higher, 256 MB RAM, CD/DVD-ROM drive, 300 MB free hard disk space, Video card with 32 MB of video RAM, 1024 x 768 24-bit color display, Speakers, keyboard & mouse.
    Does a macbook pro meet these requirements?

  • I am trying to upgrade to iTunes 11.4 and get an error message that says " iTunes has an invalid signature.  It will not be installed"  How do I fix that?

    I am trying to upgrade to iTunes 11.4 on my Windows7 PC and get an error message that says " iTunes has an invalid signature.  It will not be installed"  How do I fix that?

    Hi curliejo, 
    Welcome to the Apple Support Communities!
    In your situation I would recommend the steps in the following article for troubleshooting iTunes. It may be necessary to completely remove and reinstall iTunes in this situation. Be sure to remove all of the components with iTunes in the correct order as outlined in the article before installing fresh. 
    Issues installing iTunes or QuickTime for Windows
    Have a great day, 
    Joe

  • When I try to update to Itunes 11 I get an error message saying that Itunes has an invalid signature and wont be installed. I use Windows 7.

    Everytime I try to update to Itunes 11 I get an error message saying that Itunes has an invalid signature and can't be installed?  I have tried to install it two times and get the same message each time. Any solutions to my problem?? Those who have installed ITUNES 11 is it hard to work with? maybe im lucky it wont update?? I don't know.

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

    When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

    I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
    I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376   it takes you through the process. WARNING - it takes a little time!
    Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
    Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
    Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot again!
    Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
    Reboot!
    Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

  • TS3683 I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013.  I keep getting the error message "iTunes could not back up iPad "" because an error have occurred."  Any suggestions on what I can do to resolve this error?

    I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013.  I keep getting the error message "iTunes could not back up iPad "" because an error have occurred."  Any suggestions on what I can do to resolve this error?

    Hi there BuffaloSailor!
    I have an article here with some troubleshooting suggestions for this issue:
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/ts2529
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

    When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
    Regards.

Maybe you are looking for

  • Library gone after update

    Upgraded to iTunes 9 and now my library only has one song in it. Followed the directions to restore the music library.xml file with no luck, still only one song. Now what?

  • Users getting upgrade prompt with SilentAutoUpdateEnable=1 set

    We've been deploying Flash Player  11.6.602.180 to our desktops recently, along with this mms.cfg: AutoUpdateDisable=0 SilentAutoUpdateEnable=1 SilentAutoUpdateServerDomain=(internal server) Users are getting propted to upgrade via the red Adobe box.

  • Just Updated to Leopard 10.5.7 but I no longer can use my HP Printer

    Since updating to 10.5.7 I can't use my printer HP Photosmart 5200 Series. I tried reinstalling and it is there but leopard won't recognise it being there now. How do I uninstall 10.5.7 and go back to previous where my printer worked?

  • PersistentDataSuite in AE CC

    Hi! I have an issue with PersistentDataSuite in AE CC. I try to turn the JavaScript Debugger off, with no success. here's my code: version1: AEGP_PersistentBlobH blobH = NULL; A_char bufferAC[AEGP_MAX_ABOUT_STRING_SIZE] = {'\0'}; ERR(suites.Persisten

  • Issue with changing data in PSA

    Hi...I had a request in PSA which has one incorrect record.I had created a chain..and was loading data to target..so infopackage(full load) successfully loaded data to the PSA then DTP failed due to incorrect record. I changed the record and loaded t