Dabase fail over problem after we change Concurrency Strategy:

Hi We had Concurrency Strategy:excusive . Now we change that to Database for performace
reasons. Since we change that now when we do oracle database fail over weblogic
6.1 does not detect database fail over and it need to be rebooted.
how we can resolve this ??

Hi,
It is just faining one of the application servers, developer wrote that when installing CI, Local hostname is written in Database and SDM. We will have to do a Homogeneous system copy to change the name.
The problem is that I used Virtual SAP group name in CI and DI application servers, in SCS and ASCS we used Virtual hostnames and it is OK according to SAP developer.
The Start and instance profiles were checked and everything was fine, just the dispatcher from CI is having problems when comming from Node B to Node A.
Regards

Similar Messages

JWS Desktop shortcut fails to update after JNLP change in 1.6.0 update 18

Has anyone else noticed the desktop shortcut fail to update after a change to the JNLP with the latest Java 1.6.0 update 18 release?
Here are the steps we've found to replicate the issue on Windows XP, Vista, and Windows 7 using both IE and Firefox:
1) Download a JWS application and allow the desktop link to be created
2) Inspect the desktop shortcut and notice the path to the JNLP cache entry
3) Modify the JNLP at the server
4) Run the application via the desktop link - at this point the application will download updates and execute without issues.
5) Close the application - upon close, JWS will remove the old JNLP cache entry if the JNLP contained the security/all-permissions directive
6) Inspect the desktop shortcut again - notice that the path to the JNLP cache entry will remain unchanged
7) Launch the application again using the desktop link - JWS will fail with a cache exception if the JNLP contained the security/all-permissions element or will just run from the old JNLP
I've submitted a bug but just wanted to confirm that others are encountering the same issue.
Thanks,
Troy

Thanks for confirming.
This issue seems to continually creep into the Java releases. In the 1.6.0 releases, the issue is resolved in update 7 through update 11. Update 12, 13, and 14 all had various JNLP issues but I did find this specific issue with update 14. It was fixed again in update 15 and remained fixed through update 17.
I submitted two bugs and provided a simple sample application on our production site to use for testing with a url to update the last modified time. If bug is accepted, I'll post it here for others to vote for a fix.

Servlet fail-over problem

          I'm testing WebLogic clustering of servlets with in-memory-replication in Sun platform
          (wls 5.1 sp9) and using Apache plug-in.
          I did this test:
          - I configured a cluster of two servers
          - I simulate a situation of hang, in one of the two servers, filling all execution
          threads with servlets doing Thread.sleep()
          - I tried to launch a request to the cluster (a JSP request) but my request timed
          out
          after ConnectTimeoutSecs.
          Looking at the wlproxy.log it seems that the cluster attempts to failover to
          the
          secondary server (after HungServerRecoverSecs) but it doesn't respond, then it
          retries
          with the primary server and so on ( waiting every time HungServerRecoverSecs for
          a
          response) until the timeout "ConnectTimeoutSecs" is reached.
          This is very strange because the secondary server is not hung; if I launch a request
          directly to it (specifying in the URL host:port) it responds to me.
          I have also tried to specify the parameter Idempotent ON, even if the default
          is ON, but
          with no result.
          Can anyone help me?


          I solved the problem setting the parameter weblogic.system.servletThreadCount
          in the cluster properties file.
          Now another problem raised.
          When one of server of the cluster is in a status of hang the cluster
          carry out fail-over to the second server but session information is lost.
          Can anyone help me?
          "Mike Reiche" <[email protected]> wrote:
          >
          >Don't take this as absolute gospel - it is just my understanding of how
          >things
          >work.
          >
          >Since the WL server is still alive, it will accept connections. This
          >takes ConnectTimeOutSecs
          >out of the picture.
          >
          >Now you're just left with HungRecoverSeconds. If the response takes longer
          >than
          >HungRecoverSeconds, then wlproxy will deem the request to have 'timed
          >out'. If
          >it is not Idempotent, that's it, you're done. If it is Idempotent, wlproxy
          >will
          >retry - on the other wl instance. From what you describe, the second
          >one should
          >work - unless of course the second WL is also backed up with Thread.sleep()
          >-
          >then after HungRecoverSeconds, the request will be resent to an available
          >WL instance.
          >
          >"Lucia Giraldo" <[email protected]> wrote:
          >>
          >>I'm testing WebLogic clustering of servlets with in-memory-replication
          >>in Sun platform
          >>(wls 5.1 sp9) and using Apache plug-in.
          >>I did this test:
          >>- I configured a cluster of two servers
          >>- I simulate a situation of hang, in one of the two servers, filling
          >>all execution
          >>threads with servlets doing Thread.sleep()
          >>- I tried to launch a request to the cluster (a JSP request) but my
          >request
          >>timed
          >>out
          >>after ConnectTimeoutSecs.
          >>Looking at the wlproxy.log it seems that the cluster attempts to failover
          >>to
          >>the
          >>secondary server (after HungServerRecoverSecs) but it doesn't respond,
          >>then it
          >>retries
          >>with the primary server and so on ( waiting every time HungServerRecoverSecs
          >>for
          >>a
          >>response) until the timeout "ConnectTimeoutSecs" is reached.
          >>This is very strange because the secondary server is not hung; if I
          >launch
          >>a request
          >>directly to it (specifying in the URL host:port) it responds to me.
          >>I have also tried to specify the parameter Idempotent ON, even if the
          >>default
          >>is ON, but
          >>with no result.
          >>Can anyone help me?
          >

Problems after Mainboard changed

I experience a problem after i have changed my mainboard into a MSI K7T Delta-L with a Athlon 2400+ XP. The Performance is as it is used to be, and when i do not scroll all is smooth, but when i scroll the screen it stars to jerk and "blur" although the FPS are high. Does anyone know, what the ´cause for this is?

Look at the other posts of the people that have answered you, and put your specs in yout sig. If we see what your hardware specs are, it will help you in getting better, more useful answers.
And yes, your pc might boot up fine, but once you put a load on your system (running programs) your pc requires more power. Did you upgrade to a new graphics card when you rebuilt your system?
we need more info to help you......

HT4254 Problems after battery changing

everytime I change the batteries in my trackpad, I have to intermittently hit system preferences to get it to recognize the trackpad. Any suggestions? And yes, the batteries are in the right way.

Hello:
If that only happens after you change batteries, I would say that is normal. You might make the device a favorite - that may help.
Barry

Startup problems after battery change

My G4 Desktop, now getting on for 6 years old, but working perfectly until recently, needed a battery change on the mainboard as the clock was having problems. However this has led to startup problems: initially, following the startup chord, the computer wouldn't start at all. After some online digging, I found references to the CUDA button/zapping the PRAM. I can now restart by resetting CUDA, but the computer usually won't restart or even start from power off, meaning I have to go back to the CUDA button every time. The computer also fails to recognize the installed RAM, except for 128MB, corresponding to one of three RAM strips.
Apart from the battery, the only other likely contributing factors are that the computer's been shipped internationally recently (however, it was professionally packed and shipped, and made its first restart after this move without problems). The other potential factor is the switch in voltage, from 240 to 110, but that was handled normally by switching over on the back of the case.
I would really appreciate any advice that can help me get this old clunker back in action, and with all RAM recognized. Nice as an upgrade would be, it's not a strong option for me at the moment, and I'm otherwise satisfied with the G4 anyway.
Powermac G4 Desktop Mac OS X (10.4.2)
Powermac G4 Desktop Mac OS X (10.4.2)

Hi, Yukiguni!
You sure have an interesting problem...
You might review Texas Macman's tutorial at the following link:
http://www.geocities.com/texas_macman/pram.html
I'd check that replacement battery with a voltmeter to insure that it's good. ("New" isn't necessarily synonymous with "fresh".)
You might try completely de-energizing your Mac. In the link above, there's a Tip just above the Battery section that refers to what to do when sometimes computers lose their mind. This procedure oftentimes works to reset a PMU/CUDA that seems to refuse to reset properly and retain the correct startup parameters.
If you can get the Mac to boot from disk again, you might run the Apple Hardware Disk. Definitely run Repair Disk from the install disk if you haven't already done so and can get it to boot from disk. (You might try booting to the Startup Manager by holding down the option key at startup and trying to select the disk from there. Your best bet for success is to do so just after resetting the CUDA/PMU.)
Gary

Problems after router change

I have just changed my wireless router and am having problems connecting with iChat video. I have tested it with Apple testers on my old router (802.11g/b) and it works perfectly but it will not connect with my new one (802.11n) although it does work OK from one of my computers to the other - perhaps a local network issue? The message I get is that I have been disconnected because no data has been received in the last 10 seconds. The routers are the same make (Netgear) and I have populated each of them with much the same data regarding Firewall rules etc. Any help would be appreciated. I could just go back to the old one but I'm hoping for better speeds and range from the new one so would like to get it working.

Hi,
The DG834G Netgear that I had would not work without the DOS being Off and the Pings being allowed.
Do you still have the Port Forwarding setting Enabled ?
I am curious about the VPN.
Some VPNs are set up with an Internet connection as part of the process.
It sounds like this one is not. iChat cannot resolve two connections to the Internet (Wifi and Ethernet at the same time for instance)
The No Data for 10 Secs message means you were connected (even if you did not see any Video or hear any Audio).
The message means that iChat did not end the chat and that an external event did, such as pulling an Ethernet cable, router failure, turning off the Mac's Airport card.
DOS work on a threshold basis and if it receives "Too much Data, Too Quickly" it cuts the port that this is happening on to "Protect" the whole connection.
This threshold cannot be changed and tends to be lower than iChat can Stream video over modern connection speeds.
I would try two things separately.
The SIP ALG is something I did not have on my Netgear.
iChat Uses SIP so I would try it with that ON.
Also try setting iChat menu > Preferences > Video Section > Bandwidth Limit to 500kbps
iChat 5 Can "See" your whole Internet Connection speed. (iChat 4 and Earlier was limited to a max of 1.5Mbps set in System Preferences > Quicktime > Streaming - a setting that does not exist in Snow Leopard)
It could be that the new router allows faster throughput and that you have moved to iChat 5 meaning you are bumping into the DOS threshold.
Of course the issue could be at the other end. The log is not that specific about which end "Cut" the connection.
7:34 PM Sunday; July 25, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

VCenter 6 fails to restart after IP change

I changed the vCenter 6 IP from within web client.
Since I had problems connecting to the new IP, I restarted the server via vSphere Client directly on the host using VMware Tools.
After the restart, I can't connect to vCenter any more. Trying to connect via https shows me the following error:
503 Service Unavailable (Failed to connect to endpoint: [N7Vmacore4Http20NamedPipeServiceSpecE:0x7f4158068bf0] _serverNamespace = / _isRedirect = false _pipeName =/var/run/vmware/vpxd-webserver-pipe)
Then I directly used the console, enabled ssh and bash and logged in there.
I tried to check the current IP settings via the script used in version 5.5 which still exists (/opt/vmware/share/vami/vami_config_net) but fails with multiple errors.
Then, I tried to reset the certificates via certificate manager (/usr/lib/vmware-vmca/bin/certificate-manager), but I could not login via SSO (seems that SSO service could also not be started).
Then, I had a look in the log files, and noticed a problem with vmware-vpxd:
VC SSL certificate does not exist, it will be generated by vpxd
This did not help either. I tried to manually start the service, with the same result.
How can I fix my vCenter?

I was able to start vmware-vxpd from the CLI but still no luck
emon:                                                                                                                                               unused
Checking for service rpcbind                                                                                                                                                       running
                                                                                                                                                                                   unknown
Checking for service sendmail:                                                                                                                                                     unused
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A                                                                                                                                         running
/usr/sbin/FOO not installed
/bin/snmpd is not running
                                                                                                                                                                                   unknown
                                                                                                                                                                                   unknown
Checking for service sshd                                                                                                                                                          running
Checking for stunnel (SSL tunnel):                                                                                                                                                 unused
Checking for service syslog:                                                                                                                                                       running
Checking for service uuidd                                                                                                                                                         unused
running (standalone: 5311)
running (standalone: 5367)
Warning: vmci status: unimplemented
running (standalone: 5417)
VMware CIS License Service is running: PID:10693, Wrapper:STARTED, Java:STARTED
VMware Component Manager is running: PID:10134, Wrapper:STARTED, Java:STARTED
VMware ESX Agent Manager is not running.
VMware Inventory Service is not running.
VMware Message Bus Config Service is not running.
VMware ESXi dump collector is not running
VMware Performance Charts Service is not running.
Checking for /usr/bin/rbd-watchdog-linux:                                                                                                                                          unused
VMware HTTP Reverse Proxy is running.
VMware Service Control Agent is running: PID:10937, Wrapper:STARTED, Java:STARTED
VMware vSphere Profile-Driven Storage Service is running: PID:18707, Wrapper:STARTED, Java:STARTED
ensure environment variables are set
Checking for VMware STS IDM Server ...                                                                                                                                             running
ensure environment variables are set
Checking for service vmware-stsd                                                                                                                                                   running
syslog is running, PID: 11999
VMware Common Logging Service is running: PID:11339, Wrapper:STARTED, Java:STARTED
vmtoolsd is running
VGAuth daemon .
vAPI Endpoint is running: PID:11563, Wrapper:STARTED, Java:STARTED
VMware Content Library Service is running: PID:19194, Wrapper:STARTED, Java:STARTED
Last login: Wed May 13 12:29:51 UTC 2015 on pts/0
pg_ctl: server is running (PID: 12178)
/opt/vmware/vpostgres/9.3/bin/postgres "-D" "/storage/db/vpostgres"
VMware vCenter workflow manager is not running.
vmware-vpxd is running
VMware vService Manager is running: PID:27602, Wrapper:STARTED, Java:STARTED
/usr/java/jre-vmware/bin/vmware-vws is running.
Warning: vsock status: unimplemented
VMware vSphere Web Client is running: PID:27919, Wrapper:STARTED, Java:STARTED
Checking for service xinetd:                                                                                                                                                       unused
Checking for ypbind:

Secondary ACS 5.1 fails to Deregister, after IP change on Primary

IP address of Primary had to be changed, to respond to a hardware failure of TACACS server with IP in many device configs.
Now the Secondary fails to respond to repeated "Deregister from Primary" requests, even after reload -
   apparently because it cannot reach the Primary at its old IP address.
Requesting Deregister in GUI generates pop-up that says, "This operation will deregister this ACS Instance from the Primary Instance.
     Management applications on this ACS instance will be restarted and you will be required to login again. After performing this operation
     please wait five minutes for this restart to complete.
     Do you wish to contine?"      [ OK ]
But, checking back after 10 minutes -- or even the next day -- finds the Secondary's status unchanged.
Also tried Local Mode, Deregister from Primary; this also fails.
Does anyone have HOWTO URL on a total rebuild of ACS application?
Both ACS are CACS-1121-K9   running 5.1.0.44.4.
Thanks in advance for any help...
*** UPDATE: ***
Recommended command, "application reset-config acs",    was _exactly_ what was needed.
jrabinow -   many thanks!    :-)
    also, thank you for mentioning that the license would be required, so that I could locate it in advance and have it ready.
      Since there were no local certs on the server, we did not need to re-install those.

Since this is a secondary it should not have too much in terms of specific configuration
Therefore one possibility is to reset the configuration so it once again becomes just a standalone node and then regsiter back to the deployment as is done for any new node and as you previosuly registered it
reset configuration can be done using the following command at the CLI:
application reset-config acs
Note that after you reset the configuration you will need to reinstall the license so make sure you have this to hand
Also if you has installed a server certificate for the secondary server you would need that too

LDAP problems after IP change

I changed my IP address for the LDAP server in accordance to the advice given here:
http://discussions.apple.com/thread.jspa?messageID=1983263&#1983263
[using command:
sudo changeip /LDAPv3/127.0.0.1 212.212.123.45 212.212.35.5 ldap.example.com ldap.example.com
However, LDAP still does not work. [when attempting to authenticate, I just get the shaking Login screen]. The logs do not indicate anything useful to diagnose this problem.
As well, iChat (on another server) can not authenticate users to the OD Server (assuming the problem is the same for LDAP and authentication problems).
Can someone help me out as to where I went wrong and how to correct it?

I want to thank the guys at this post:
http://discussions.apple.com/thread.jspa?messageID=2404645&#2404645
Following these instructions (while a bit bumpy in my situation) fixed my LDAP. As such, I am marking this problem as solved... although, another problem crept up as a result... MD5 mail authentication now fails (Password works)... so, I will open a new thread in Mail section and mark this as answered.

Kext and USB problems after permissions change

Hi,
I'd really appreciate any help on the following:
I recently made the mistake of manually changing the permissions on my Macintosh HD, setting myself as 'owner'. I could even boot into the OS so I ran "repair permissions" while booting from the OS installation CD.
After that I can boot up and log in, but I get a few error messages saying "system extension cannot be used" for a few .kext files (all seeming to relate to printers) as well as "insecure startup item disabled" for HP IO and HP Trap Monitor (also printer related). Needless to say I cant print, but more worrying is the fact that Itunes no longer picks up my iphone or ipad.
I have run the "repair permissions" twice again since. Every time it lists a very very long list of corrections, but ends saying the repair was succesful. I have also cleared the system cash using Yasu.
Can someone please advise me on what to do. The current permissions on my HD as follows:
system : read&write
me: read&write (and owner)
admin: read&write
everyone: read only
Thank you.

Do what Linc says: shut down your Mac, and don't turn it back on until you have an external drive connected. Hold down the Option key while booting up. Insert your Snow Leopard install DVD. Boot up from the DVD. Launch Disk Utility from the Utilities menu. Use the Restore button to copy your internal drive to your external drive.
Once that is done, do an Erase & Install of Snow Leopard. When done, you can copy over the files/apps you need from the external drive.
I imagine you learned your lesson from this - ALWAYS HAVE A BACKUP!

Email problem after SIM change

I tried to change provider from O2 to Vodafone. Got the new SIM, put it in the BB, set up a test email account to check it worked and started to try to change network. I was told the number couldn't be ported until Wednesday. The phone has to be switched off and in the UK on that day - well, I'm travelling overseas this week so I cancelled that idea and put the O2 SIM back in the phone.
I had three email addresses on my BB. I validated two of them without a problem. The third one will not validate. I called O2 and after an hour with various people in customer "service" was told they didn't have a Blackberry team and couldn't help me (Eventually the lady transferred me to the International Operator, nice touch O2).
I have deleted the email account but cannot add it back. I have done the battery pull, I have restored and backed up the device, reloaded the software. I visited my local O2 store and the staff there, although pleasant, couldn't help either. They say it is a Blackberry problem, not an O2 problem. Now I am stuck. Can somebody please help me figure out how to validate an email address which was working on my BB this morning before I changed SIM cards?
Thank you.

Hello,
Wow...O2 really let you down there...you see, even if they are unable to help, they have the ability (indeed, responsibility!) to escalate cases up to RIM for enhanced support. They didn't do that for you...a real pity, especially since you pay them for 100% of your services and 100% of your formal support...right now, they seem to be delivering neither to you.
There are a couple of other methods to try:
If they have one, from the PC/browser, the O2 BIS website:
Sorry, I don't have a URL...there used to be a good listing, but it seems to not be functional ATM.
On your BB Browser, this site:
www.blackberry.com/integrate
See if either of those can get this going for you.
Be careful, on the BB keyboard, with entry of numbers and/or special characters...you're probably doing it right, but it is important to remember to press ALT or SYM before each and every character that is not the "normal" keyboard character. For instance, some folks press ALT just once and then think they are typing a string of number when actually they get just the first numeric with the rest being the alfa letters.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem after i changed computer name

dear friends
I have changed my server name where oracle is running. I have problem with the application to connect the oracle and i have problem with enterprise manager also can any one help me how to resolve it. and tell me what are all steps need for me to fix this problem.

Hello mr.Maran
While running EMCA i have this error plz help me to resolve and tell me what is that error in log...
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: D:\oracle\product\10.2.0\db_2
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.EMConfig isEMConfigured
CONFIG: isEMConfigured for DB: ORCL
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: ORCL Host: IME-DBS1.imeco.com Node: null OH: D:\oracle\product\10.2.0\db_2 isDBC: false
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: ORCL Host: IME-DBS1.imeco.com Node: null OH: D:\oracle\product\10.2.0\db_2 agentHome: null isCentral: false
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to D:\oracle\product\10.2.0\db_2\oui
Sep 16, 2009 10:09:24 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to D:\oracle\product\10.2.0\db_2\oui
Sep 16, 2009 10:09:25 AM oracle.sysman.emcp.util.CentralAgentUtil getCentralAgentHomeAndURL
CONFIG: Central Agent home and URL: {}
Sep 16, 2009 10:09:25 AM oracle.sysman.emcp.EMConfig finalize
CONFIG: finalize() called for EMConfig

Umlaut problem after locale change

I changed my locale from german to us english and now the umlauts don't work. My problem is that I used one of these in my password, so i can't use sudo anymore.
(Afterwards using this in a password was not a clever idea, but now it is too late)
locale
LANG=de_DE
LC_CTYPE="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_COLLATE="C"
LC_MONETARY="C"
LC_MESSAGES="C"
LC_PAPER="C"
LC_NAME="C"
LC_ADDRESS="C"
LC_TELEPHONE="C"
LC_MEASUREMENT="C"
LC_IDENTIFICATION="C"
LC_ALL=C
localectl
System Locale: LANG=de_DE.UTF-8
LC_COLLATE=C
VC Keymap: de-latin1-nodeadkeys
X11 Layout: n/a
if you need more output just aks.
nerfingen

locale
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=de_DE.UTF-8
LC_CTYPE="de_DE.UTF-8"
LC_NUMERIC="de_DE.UTF-8"
LC_TIME="de_DE.UTF-8"
LC_COLLATE=C
LC_MONETARY="de_DE.UTF-8"
LC_MESSAGES="de_DE.UTF-8"
LC_PAPER="de_DE.UTF-8"
LC_NAME="de_DE.UTF-8"
LC_ADDRESS="de_DE.UTF-8"
LC_TELEPHONE="de_DE.UTF-8"
LC_MEASUREMENT="de_DE.UTF-8"
LC_IDENTIFICATION="de_DE.UTF-8"
LC_ALL=
locale -a
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
C
POSIX
en_US
en_US.iso88591
en_US.utf8

Apple ID problem after password change?

I cant download anything from the store with my apple ID after they asked me to change the password, cuz i dont have a credit card!!!
They keep telling me that i have to submit the billing options before i have to continue !, i was fine before they asked me to change my password.
What should i do?

Hello,
To create a new Apple ID for use on iTunes Store, App Store, iBookstore, and Mac App Store without a credit card, follow the steps below.
http://support.apple.com/kb/HT2534
Hope this will help.

Dabase fail over problem after we change Concurrency Strategy:

Similar Messages

Maybe you are looking for