DAC - Can I run more then one Exection Plans with full load option enabled?

Hello All,
I have configured for subject Area sales – Orders, Backlog and Invoices (OBIEE)
Now I want to run DAC to load the underline tables for subject Areas Financials – Revenue Analysis and Financials – GL Budget and Expenses, I have identified the relevant fact tables and built a Execution Plan in DAC.
DAC - In which mode should I run the execution plan?
With full load option enabled or disabled because already full load run is done for sales – Orders, Backlog and Invoices and this run should not disturb the existing data
If I run with full load option enabled do it overrides the existing data for other subject area
Please help me I am bit confused!
Regards,
SMA
Edited by: SMA on Aug 18, 2009 3:36 PM

No need of combining all the subject areas into one execution plan. Simply run the second ETL without checking the full load option. It will do the full load for the tables related to the newly added subject areas and incremental for the common tables between old and new subject areas.

Similar Messages

Can I use more then one apple ID on my computer/osx app store

Hi,
I use my MBP/iMac/ipad/iphone for both business and home. Right now everything is setup to my home apple id (and I have made quite a few purchases with that). With the release of the osx app store and FCPX, my company wants to buy these for my computers. But they want to do this on their apple id. Can I run more then one id on a mac? How can I make this work as I know they will want me to start getting more apps as they are released.

You can have apps from multiple Apple IDs on one Mac. The issue will be that to update Mac apps bought with A ID #1 will require signing into A ID #1 in the MAS. And later when apps bought with A ID #2 need an update you will need to sign into A ID #2 in the MAS to update them. If you can keep that straight and can abide that requirement, there should be no issues.
The same will be true to update iOS apps, but using iTunes.

Can you have more then one iphone control the apple tv at the same time?

Can you have more then one iphone4 as a remote for one apple tv at the same time?

iCloud, iTunes & Apps Stores can be assigned different AppleID's from the Settings app. I have my phone and my wife's set up this way for the very reasons you are describing. Works well.

Can I connect more then one cDAQ-9188 in the same network?

Hi, I have one question for you.
Can I connect more then one cDAQ-9188 to moxa EDS-G205-T for querying simultaneously in the same PC?
thanks in advance for any response.

You will need a network switch and make sure they are different IP Addresses, but same subnet.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Can we assign more then one abap system to one bpc server?

Hi my question is short an d simple.
can we assign more then one abap system to one bpc server?
Regards Stefan

Stefan,
My understanding is that this is not possible. However, I believe you can have multiple BPC .NET servers and point them to different dialog instances of the same ABAP system. You would then put a load balancer in front of the .NET servers and requests will be distributed across the ABAP dialog instances.
Ethan

Can I run more than one "main application" in the same JVM?

Hi,
We need a instance of JVM to run each standard application, Applet or Xlet?
Can I run more than one "main application" in the same JVM?
Thanks.

stdioo wrote:
Hi,
We need a instance of JVM to run each standard application, Ok
Applet or Xlet?You have no control over the first on a client machine. Presumably not the second either although I don't know what it is.
Can I run more than one "main application" in the same JVM?Application. Not applet.
You must have a class (code) to start each "application". To keep the environments clean from each other you can use a class loader.

Can I have more then one MVIEW site connected to single master site?

Hi,
I need one help from your end.
Currently I am working on Basic Replication.For that I am using Read only Materialized views.first i tried with one master site & one Materialized view site its working fine,Can I have more then one MVIEW site connected to single master site referring to same database ? if so how to achive this one..

Actually one of my senior told me that you need to change number of OPEN_LINKS value like that so for that reason I asked this question.
Still that problem not solved..
I will explain what are all the things I did ok.
IN MASTER SITE:
I am creating read only MVIEW's.
first i created one user repadmin and have given
1>execute any procedure
2>dbms_repcat_admin.grant_admin_any_repgroup
3>dbms_repcat_admin.grant_admin_any_schema
4>select any dictionary
and all other grants to repadmin user
then I changed global_name = 'zxincmp' on Master site.
Then I created mview log for each table (for 85 tables) & then I created mview's for that table on Master site itself. later I took a dump of these 85 mview's . then I transfered this dump to one of my mview site.
IN MVIEW site:
I created one user zxdbp_55 and all the above rights are given to this user & i created one public dblink
"zxincmp" using "TO_CMP"(master site).Then I imported that dump which i took from master site.
then i created one private link zxincmp in one of my mview site.then i used DBMS_REFRESH.MAKE('')
to refresh all my tables & to set the interval..
after that i created index on the mviews..
this will works out fine for single master & single mvirew site.but I tried with the same procedure to prepare one more mview site,everything is fine but main problem is second mview site is not getting refreshed automatically,i need to do refresh manually from enterprise manager.. then it will get refreshed.
how to overcome this problem? I am using same db name ,dblink,refresh group for both the mview site will it affects anywhere?
Thanks & Regards,
Hanumanth.

HT1107 I have registered 2 domain names . can I have more then one domain name on mobile me or icloud?

I have registered 2 domain names . can I have more then one domain name on mobile me or icloud?

MobileMe ends here at the end of the month so you will need to look into hosting your website/websites with another webhosting service.
I personally use IX Webhosting for a couple of reasons:
Fast reliable personal tech support by phone, instant chat, & email
They allow unlimited domains "www.yoursite.com", unlimited email accounts, unlimited bandwidth
And, price they are very reasonable plans start @ $3.95 USD a month
http://jeffnitschke.com/IXWebHosting.html

Can I have more then one icloud E-Mail Account?

Can I have more then one icloud E-Mail Account?

Hi Pathfinder93950,
Welcome to the Support Communities!
You can only have one iCloud account per Apple ID. However, you can have up to 3 aliases that point to that iCloud account. Here is some additional information:
iCloud: Set up an @icloud.com email address
http://support.apple.com/kb/ph2620
After you set up your @icloud.com email address, you can use it to sign in to iCloud. You can also sign in using the Apple ID you used to create your iCloud account.
iCloud: About email aliases
http://support.apple.com/kb/ht4897
iCloud: Create or change email aliases
http://support.apple.com/kb/ph2622
You can have up to three active email aliases, and you can delete or deactivate (turn off) an email alias at any time. You might want to deactivate an alias if, for example, you use an alias to make a purchase. After you receive the item, you can turn off the alias to avoid follow-up advertisements, then turn it on again when you make another purchase.
Deleting an alias is permanent, so if you think you might want to use the alias again, you should simply turn it off. When an alias is turned off, all email sent to that alias is returned to the sender.
iCloud: Using your @icloud.com email address
http://support.apple.com/kb/ht5441
Cheers,
- Judy

Can you have more then one Itunes account on your computer?

Can you have more then one Itunes account on your computer?

Yes. (One of my systems has music purchased from two different iTunes accounts in its iTunes library.)

HT204150 can you have more then one itunes account on an icloud?

can you have more then one itunes account on an icloud?

I Have two iTunes accounts because I spend half the year in Canada and other half in U.S.
I Just switch the country. I have to do this because an iTunes card purchased in the U.S. Is not valid in the Canada store. And Vice Versa.
i Also have two icloud accounts. That is what I don't know about.
Do I need two? Can I have all my purchases in each country under one account?

Can i update more then one column using select query.

Dear All,
Can i update more then one column of target table A from source table B. Like
Update table A set A.A1 = (Select B.B1 from B where A.A3 = B.B3).
Above stmt. I am updating only one column. But I want to update more then one column A.A1 and A.A2
Plz give me the possible ways.
Thanks,
Vikas

Yes you can do. Try the below Query
Update A set (A.A1,A.A2) = (Select B.B1,B.B2 from B where A.A3 = B.B3)

Can I use more than one iTunes account with my apple TV?

Can I use more than one iTunes account with my apple TV?

That depends what you mean. If you mean can you purchase from more than one iTunes account on the Apple TV, then the answer is no. If you mean can you stream from more than one iTunes library, which use different accounts, then the answer is yes, so long as they both use the same ID and password for homesharing.

How can I restrict more then one user to access the table?

Hi !
I have a problem and two solutions and I am a bit confused as to
which one is the best one and/or can there be any better way of
handling the problem ?
Problem : I have to update a key field of a table when I update
it in the form 5.0 screen. I am basically doing a maintenance of
a table and if a certain field is updated then the change has to
be reflected in two more tables. But the issue is that the field
is a part of the key in those two tables. So all I can think of
is that I need to insert new set or rows for that new value of
the field and delete the old set of records for old values of
the field.
There are two ways of doing it;
1.One option can be to explicitely define two cursors separately
and fetch the values in them one by one and then insert the new
records and then delete the old records in both the tables. This
I feel will be a cumbersome process both in terms of processing
time and the coding.
2.Second option I was thinking can be to create two flat tables
(without keys) and insert the values in them and update the
changed field there and then insert the rows in the respective
tables. Delete the old records in the main tables and delets the
records in these flat tables. This is a bit more faster and
easier to predict and code. This seems to be a better option for
me.
Any comments on these ?
In both the cases I was thinking of making some provision so
that more then one person can't update the table simultaneously.
Since if there are more then one persons doing the processing
then some inconsistency might creep into the whole process.
This is easier to do in the second process as if I check the
data in the flat tables and if there is some data then I can
presume that some one is doing the processing and I can ask the
other person to hold for a while. But in this case how can I
stop more then two people to simultaneously check for the empty
table and start inserting the record ?
I was just thinking of having a sepatare table having only one
field and this will be a key field and as the process begins the
process will insert a fix value say 'Y' in the key field and at
the end of the process the record will be deleted and this way
we can restrict the user to access the process more then one at
a time..? Since you can't have same value of the key in a table
more then once.
Any better way of handling it will be deeply appreciated.
How about locking the table at the begining and releasing the
lock at the end ? Will there be any issue in that? since I am
inserting and deleting the rows in the same transaction.
Comments welcome,
Shobhit
null

How about performing the update IN the database using a stored
procedure?
By using non-database fields on your form to get the
information, you can then call the procedure in the database to
perform the updates. If an error occurs in the procedure you
rollback, if necessary, and send a message or status back to the
form. If it succeeds you might wish to commit and then re-
execute the form's query -- using either the original key values
or the new key values...
null

Since iTunes 7 can't import more then one song at a time

When I use File> Add file to library, I can no longer import more then one song. If I select more then one file, iTunes wont import anything. I have my music download to my main iTunes folder, therefor I dont want to use add a folder, also there often is other songs I dont want to import at that time. I can drag and drop from explorer, but its annoying.
Not a terrible bug, but another in the long list for iTunes 7.
custom Windows XP Pro P4 2.8, 1 Gig Ram, Radeon x1600pro, Asus mobo

Thanks Rachyl, I'll try that when I get off of work. What about the album art? How can I make sure I get it every time in the future. Can I rip my CD's using another software to make sure they are tagged right?
BTW I used to live in NC not too long ago and went to school there....GO HEELS!

DAC - Can I run more then one Exection Plans with full load option enabled?

Similar Messages

Maybe you are looking for