DAC can't connect with INFORMATICA_DW_SERVER when dac server is running

Hello all,
We have something strange.
We just installed BIA 7.9.5.1 with informatica 8.1.1 sp5 on windows server 2003.
And confiugered it according to the manual.
Now we want to setup the connection from the dac to the informatica services but we can't establish a connection when the DAC server is running. When we press on test connection it says 'please wait... ' but that is for almost an hour now or so.
Now when we stop the dac server the connection to informatica_dw_server works just fine.
Also the connection with the informatica_rep_server works, also when the dac server is started.
What have we done so far:
- We can run pmcmd and pmrep from the command line
- We added the /server/bin and /client/bin directory to the path
- We added the system variable infa_domains_file
- We checked the config.bat file from the dac server
- We checked the port in the adminconsole (which is 4001)
- We restarted everything (all the services and the windows server as well)
- when we try netstat we see it is listening on port 4001
Proto Local Address Foreign Address State
TCP rst-act3ct2:4001 rst-act3ct2:0 LISTENING --> is this correct?
Hope anyone can help me out!!!!
Best regards,
Remc0 & Erik

user7316776 wrote:>
Now we want to setup the connection from the dac to the informatica services but we can't establish a connection when the DAC server is running. When we press on test connection it says 'please wait... ' but that is for almost an hour now or so.
Now when we stop the dac server the connection to informatica_dw_server works just fine.
Also the connection with the informatica_rep_server works, also when the dac server is started.
What have we done so far:
- We can run pmcmd and pmrep from the command line
- We added the /server/bin and /client/bin directory to the path
- We added the system variable infa_domains_file
- We checked the config.bat file from the dac server
- We checked the port in the adminconsole (which is 4001)
- We restarted everything (all the services and the windows server as well)
- when we try netstat we see it is listening on port 4001>
Hope anyone can help me out!!!!
Best regards,
Remc0 & Erik>i have similar problem. When i test connection to Integration Service it says 'please wait... ' 10-15 minuts and then I am getting error:
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.1.1 SP5], build [135.0129], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Wed Mar 25 13:53:41 2009
The command: [pingserver] is deprecated. Please use the command [pingservice] in the future.
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [localhost:6001].
Completed at Wed Mar 25 13:54:21 2009
=====================================
ERROR OUTPUT
=====================================
When i test connect to Repository all right
Please!! Help me!!!!

Similar Messages

  • HT201210 can't connect with ipod software update server, what should i do?

    i tried to update my ipod but whenever i try i get the message [the ipod "    " cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavailable] my ipod is stuck in recovery mode, what to do?

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • I can't turn it off and can't connect with iTunes

    I can't turn the iPod Touch 4 off and can't connect with iTunes
    When I try to connect with iTunes, it said because of some unkowned error occurred (0xE8000065)
    Please HELP!!!!!!!!!!!!

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • TS1702 i downloaded the GV app to my iphone but i'm trying to set up the app and it says it can't connect to google when i try to sign in to my google account.... any ideas what's wrong? i can access my gmail account just fine with my gmail app on the sam

    i downloaded the GV app to my iphone but i'm trying to set up the app and it says it can't connect to google when i try to sign in to my google account.... any ideas what's wrong? i can access my gmail account just fine with my gmail app on the same phone

    What's a GV app?

  • HT5085 hi, i bought itunes match yesterday, and i can not connect with the server. Error 4010 appear ever time when i want to entry on Itunes match.Thanks

    i bought itunes match yesterday and i can not connect with the server. Error 4010 appear every tiem when i want to entry on itunes match.
    Thanks

    Here are some things to try:
    Close itunes
    Check your internet settings.
    Control Panel – Internet Options – Advanced
    Check SSL 3.0 and TLS 1.0
    Uncheck “Check for server certificate revocation (requires restart)”
    Click Apply
    Click Okay
    Open itunes and try again
    And, you don't need to turn off the firewall, just add itunes and itunes helper to your security software firewall.

  • When I open my itunes it shows me two sides one is iTunesU and the other side is Podcasts and I can't connect with iTunes.How can I fix it

    When I open my itunes it shows me two sides one is iTunesU and the other side is Podcasts and I can't connect with iTunes.How can I fix it?

    Hi emzigal,
    Thank you for using Apple Support Communities. 
    Take a look at the following article to make sure that you are not missing any steps necessary for downloading past purchases. 
    Download past purchases - Apple Support
    Cheers,
    Jeff D. 

  • I can no longer log into my ichat linked to my gmail.  right after opening up ichat, receive the following message:  lost connection with jabber.  the server has unexpectedly disconnected.

    i can no longer log into my ichat linked to my gmail.  right after opening up ichat, receive the following message:  lost connection with jabber.  the server has unexpectedly disconnected.  how to troubleshoot?  thanks.

    Hi,
    There can be many reasons why the Login is "up the creek".
    Any break in the network at your end whilst logged in will cause  an issue.
    A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
    If they don't agree the server will refuse to accept.
    A Crash at the server end which does not log you out properly will also do it.
    Any file at any time can be come corrupted.
    Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
    If it were AIM you can also get your Account Suspended  and this will not log you in.
    (It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
    Most of the big IM services use multiple servers.
    Sometimes these go out of Sync.
    In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration.  I am not sure if this happens at Google.
    You seem to be talking about an account that has worked at Work and having new computer at home.
    As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in  (this will kick the work Computer out of Google whether you are logged in  on the Web Mail page or in iChat)
    IN addition to that iChat stays partially logged in for Off Line IMs
    This is done in the background by a support app called iChatAgent
    If your Computer is ON but ichat is not started people can still send you Messages.
    Instead of saving these on the server until you login iChat will start up.
    Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
    Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
    The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them.  If this happens you get a warning and messages to do something about it.
    You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
    If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
    There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
    Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
    This should show all pics as their icon.
    Check that all display properly.
    At this point I would try a COMBO version update install of the last Update you did over what you have.
    This often corrects hard to trace things
    The 10.5.8 COMBO is here
    11:28 PM      Monday; June 20, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I can't connect with using connector

    Hi,
    I want to create a system(Solman 4.0) in Portal.I have created a SAP system using dedicated application server and then I filled all necessary fields.I tested with using system connection test.There are two test nameS(SAP Web AS Connection and Connection test for Connectors)Firstly, I checked WAS Connection and everything was ok but when I tested "Connection Test for Connectors" it didn't work.When I clicked test button, it said "Connection failed. Make sure user mapping is set correctly and all connection properties are correct" but I didn't use UIDPW.I used the Logon Ticket method and system_type is SAP_CRM but when I checked log file, it said this message "(R3/BW) Failed to get connection. Please contact your admin".I didin't understand because I have already used SAP_CRM syte sytem type.Why do I get this message. In addition, The ume.usermapping.unsecure is already on TRUE.In short, I can't connect with using connector.What's the problem?

    Hi Vijith,
    I perform your suggestion and I got an error message.This error message is written below.
    Exception in SAP Application Integrator occured: Unable to parse template '<System.ConnectionString>'; the problem occured at position 0. Cannot process expression <System.ConnectionString> because Invalid System Attribute: System: &#39;SAP_LocalSystem&#39;, Attribute: &#39;ConnectionString&#39;. .
    There is a connection string error but I didn't use by using connection string method.I have used by using dedicated application server. At the same time, I have another error message in the dev_jrfc.trc.This error message is as fallows
    Error> occured  >Mon May 07 09:18:37,334<    >RfcGetException rc (7) message: The system is unable to interpret the SSO ticket received
    <RfcGetException
    What's your comment?

  • How can I connect with the AspNetUsers table in MVC 5?

    I have a model, in which I have used several foreign keys from other tables. The point is that I also need to get the Id of the user, from the AspNetUsers table, though, I don't know how. I have done something like this, but it doesn't seem to be working:
    public class Message
        public int MessageID { get; set; }
        [Required(ErrorMessage="Please type a message to submit")]
        [DataType(DataType.MultilineText)]
        [Display(Name="Message")]
        public string MessageText { get; set; }
        public DateTime WrittenOn { get; set; }
        [Required(ErrorMessage="Please select a ticket")]
        [ForeignKey("Ticket")]
        [Display(Name="Ticket")]
        public int TicketID { get; set; }
        public virtual Ticket Ticket { get; set; }
        [Required(ErrorMessage = "Please select a business")]
        [ForeignKey("Business")]
        [Display(Name = "Business")]
        public int BusinessID { get; set; }
        public virtual Business Business { get; set; }
        [Required(ErrorMessage = "Please select a user")]
        [ForeignKey("aspnetusers")]
        [Display(Name = "User")]
        public int Id { get; set; }
        public virtual ApplicationUser ApplicationUser { get; set; }
    When I try to create a controller using the Entity Framework with my model, I get an error message saying:
        The ForeignKeyAttribute on property 'Id' on type ... is not valid. The navigation property 'aspnetusers' was not found on the dependent type ... The Name value should be a valid navigation property name.
    If someone could help me solve the problem, I would be glad.

    Hi Toni,
    I see that this particular query is been answered in the following thread.
    http://stackoverflow.com/questions/25372436/how-can-i-connect-with-the-aspnetusers-table-in-mvc-5
    You can also refer the following links, hope this helps.
    http://stackoverflow.com/questions/20071282/aspnet-identity-and-mvc5
    http://blogs.msdn.com/b/webdev/archive/2013/10/16/customizing-profile-information-in-asp-net-identity-in-vs-2013-templates.aspx
    Regards,
    Bharath

  • Itunes can`t connect with the ipad because it is blocked with a code

    the thing is the following . I bought an Ipad and they connected it to the computer without synicing it with itunes so I could use it. I used it for a while and inserted a password. After using it I turned it off and when I got home it appears " Itunes can´t connect with the ipad because it is blocked with a code. Insert the code in the ipad to use it with itunes." The point is that I can´t even use it because it says to insert the password and the ipad says that I have to connect it to itunes so no password can be inserted so I can´t use my ipad

    You need to start all over from the beginning.  After connecting your iPad to the computer, look in iTunes for instructions how to "Restore as new."

  • I receive an error message0xe800007f iTunes can not connect with iPhone unknown error

    i receive an error message, " itunes can not connect with iphone , unknown error
    " 0xe800007f
    i have mac mini with lion os and iphone 4s

    Make sure you have the latest version of iTunes. You can download it from here -> http://www.apple.com/itunes/download/
    If that doesn't work, check out this Apple article -> iOS: Unknown error containing '0xE' when connecting to a Windows PC

  • I can't connect with my XDCAM PDW-U1

    I can't connect with my XDCAM PDW-U1 to capture clips. I loaded software by sony, tried everything I could but it still doesn't work! I'm working with OS 10.6.8, FCP 7. I Mac 2.93 Ghz Intel Core i7.
    Any clue?
    Thanks JP Maher

    I got something here!!!
    When I try to download a driver for 10.6... like what the info written on the Sony page:
    Support for Mac OS X 10.6 of Professional Disc material.
    It switches automaticaly to another one indicating this:
    Support for Mac OS X 10.7 (Lion).
    I tried different ones and the same switch happens everytime...
    And David, I'm unable to find the "Stand Alone" utility from the Sony site. I might be stupid but I searched a lot but no joy!!!
    Thanks again
    JP Maher

  • ITunes for Cyprus? Can't connect with iTunes in the US?

    If I want to buy a product great! They are more than ready to take my money, such as CHARGE me TWICE for the same product!!! Now when I try to report the problem I can't connect with ITUNES Store???
    WHAT AM I PAYING 739 EUROS for???

    Why would you post a link that says absolutely nothing useful to me?
    Anyone have an actual answer for me?

  • In attempting to reset my ipad2thru itunes it states restore .iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes. when i hit restore it does  not reset

    in attempting to reset my ipad2 thru itunes it states .iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes. when i hit restore it does  not reset

    Step by step
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. iPad Recovery Mode on computer screen
    8. Select "Restore iPad"...
    9. Select "Restore and Update"
    10. Extracting Software.
    11. Preparing iPad for restore.
    12. Waiting for iPad.
    13. Verifying iPad restore...
    14.Restoring iPad software.
    15. Verifying iPad software.
    16. Verifying iPad Restore...
    17. Restoring iPad firmware...
    18. Your iPad is restored to factory settings; keep iPad connected to computer
    19. Activate iPad
    20. Enter Apple ID and Password
    21. Continue
    22. Welcome to Your New iPad

  • I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

    I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

    ErolSinan wrote:
    ... there is no button for update between the About and Usage buttons in the General. ...
    Correct. That is only a feature of iOS 5 or later...
    ErolSinan wrote:
    ... yes my phone is 3G.
    then it can only go as far as iOS 4.2.1

Maybe you are looking for