DAC: error while reading repository table

Hi everybody,
I installed DAC (copied from server to a workstation).
When trying to run DAC client on the workstation, I get an error message "Error while reading repository table"
The connection seems to be configured properly (test connection successful).
DAC client on server machine starts normally.
What can be a problem?
Thanks,
Alex

Hello again!
Has anybody seen this problem?
What can it be?
Where can I find DAC logs?
Cheers,
Alex

Similar Messages

  • DAC: "error while reading repository table". Please help!

    Hi everybody,
    I copied DAC directory from server to a workstation.
    DAC client on server machine runs normally.
    When trying to run DAC client on the workstation, I get an error message "Error while reading repository table".
    I tried to find any DAC log file to get some additional information, but I couldn't.
    The connection in DAC seems to be configured properly (test connection successful).
    The only difference I found between server and workstation is that there are two Oracle homes installed on the workstation and one - on the server.
    Thanks,
    Alex

    So you can read the tables now? Good to know.
    Just as a hint: if you "tnsping" your data source from a command window, you'll see which path and file is used, so you can find out which home.
    TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 04-MAR-2009 16:42:43
    Copyright (c) 1997, 2007, Oracle. All rights reserved.
    Used parameter files:
    C:\Oracle\product\11.1.0\client_1\network\admin\sqlnet.ora <--- my 11g home is used and not the 9i or 10g which also reside on this machine.
    @DAC client can't connect to server: i.e. the icon stays red?
    - Is your server up and running? (I don't want to start a flame war, but it happens to the best of us)
    - Did you go through the steps here? http://download.oracle.com/docs/cd/E12513_01/doc/bic.101/e12653/dac_configure.htm
    Cheers,
    C.

  • Error while reading Swd_Header table in workflow.

    Hii,
         For Pr rejection workflow i have created one Zevent.Inside workflow for User decision derived one rule
    which is ending in following error.
    Database error '4' reading table 'SWD_HEADER'
    The function module for rule 'AC99900003' initialized an exception and returned a message.
    I am not able to understan from where n why it is trowing d error.Thne FM written for rule is properly retriving the value.
    Pls help me to solve the issue.

    Hi Nivdedita,
    Check the rule which you have defined in the workflow.
    Regards,
    Sravanthi

  • Error while reading data through External Table!!!

    CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
    (     "ITEM_DESC" VARCHAR2(200 BYTE),
    "EXT_CODE" VARCHAR2(20 BYTE),
    "RC_DATE" DATE,
    "RES_KD_AMNT" NUMBER(18,3),
    "RES_FC_AMNT" NUMBER(18,3),
    "NRES_KD_AMNT" NUMBER(18,3),
    "NRES_FC_AMNT" NUMBER(18,3),
    "TOTAL" NUMBER(18,3),
    "OF_WHICH_OVR1" NUMBER(18,3)
    ORGANIZATION EXTERNAL
    ( TYPE ORACLE_LOADER
    DEFAULT DIRECTORY "EXTDATADIR"
    ACCESS PARAMETERS
    ( RECORDS
    DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
    MISSING FIELD VALUES ARE NULL )
    LOCATION
    ( 'TBS9_TEST.CSV'
    External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
    Thanks in Advance,
    AP

    Let's start with the basics...
    1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
    2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
    Justin

  • Error while reading payroll area D0, table T549S

    Hi,
    would you know what this kind of error message could mean?
    "Error while reading payroll area D0, table T549S"
    This is an error while trying to extract payroll data to business warehouse. What should I look for to find the cause of this error?
    Thanks in advance,
    Mantas

    You have to contact the HR consultant in ur tem
    Next they might have not mapped the payroll which you are trying
    REWARD POINTS

  • Full Load: Error while executing :TRUNCATE TABLE: S_ETL_PARAM

    Hi All,
    We are using Bi Apps 7.9.6.1. Full Load was running fine. But Now we are facing a problem with truncating a table "S_ETL_PARAM".
    I have restart informatica Server And also DAC Srever. But still I am getting the same in the DAC Log as, *"NOMALY INFO::: Error while executing : TRUNCATE TABLE:S_ETL_PARAM*
    *MESSAGE:::com.siebel.etl.database.IllegalSQLQueryException: DBConnection_OLTP:SIEBTRUN ('siebel.S_ETL_PARAM')*
    *Values :*
    *Null Map*
    *EXCEPTION CLASS::: java.lang.Exception"*
    Any Suggestion.....
    Thanks in Advance,
    Deepak

    are you trying to run incremental load when you get this truncate error? can you re-run full load and see that still runs ok? pls also check your DW side database logs like alert lor any DB level issue. such errors do not throw friendly messages in DAC/Informatica side.

  • Oracle.mds.persistence.MDSIOException: MDS-00521: error while reading docum

    Team,
    I am new to Oracle IDM. While I am doing some exercises I am getting the below error message,while I start the OIM server. I am able to run the weblogic server without any issues,
    Please check the below stack of error message.
    oracle.mds.exception.MDSRuntimeException: MDS-00521: error while reading document /last_update from metadata repository
    MDS-00521: error while reading document /last_update from metadata repository
    ORA-00942: table or view does not exist
    ORA-06512: at "DEVMAR_MDS.MDS_INTERNAL_SHREDDED", line 37
    ORA-06512: at "DEVMAR_MDS.MDS_INTERNAL_SHREDDED", line 633
    ORA-06512: at line 1
         at oracle.mds.internal.mopart.MOPartContentImpl.getInputSource(MOPartContentImpl.java:233)
         at oracle.mds.internal.model.BaseDocBuilder.executeInternal(BaseDocBuilder.java:358)
         at oracle.mds.internal.model.BaseDocBuilder.execute(BaseDocBuilder.java:180)
         at oracle.mds.internal.model.ContentModelPipeline.processPipeline(ContentModelPipeline.java:265)
         at oracle.mds.core.MOContent.fetchContent(MOContent.java:512)
         at oracle.mds.core.CachedMOContent.fetchContent(CachedMOContent.java:253)
         at oracle.mds.core.MOContent.getDocumentFromPipeline(MOContent.java:752)
         at oracle.mds.core.MOContent.getDocument(MOContent.java:669)
         at oracle.mds.core.MetadataObject.getContentWithRetry(MetadataObject.java:2388)
         at oracle.mds.core.MetadataObject.getDocument(MetadataObject.java:423)
         at oracle.mds.core.MetadataObject.getDocument(MetadataObject.java:370)
         at oracle.wsm.repository.mds.Session.getRepositoryInfo(Session.java:1880)
         at oracle.wsm.repository.mds.Session.isSeeded(Session.java:1980)
         at oracle.wsm.policymanager.bean.UpgradeManagerBean.seedWSMPolicyRepository(UpgradeManagerBean.java:508)
         at oracle.wsm.policymanager.web.PolicyManagerValidator.init(PolicyManagerValidator.java:111)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
         at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Thanks in advance...
    Regards
    Arun

    This seems issue with MDS schema. You can try two things:
    - Restart everything again (database and admin server as well)
    - If above doesn't solve you problem. then there must problem while creating schema using RCU. Run RCU utility again, drop and recreate schema and reconfigure OIM.
    This is what I suspect. Other experts can jump in with better solution.
    regards,
    GP

  • Unable to Log-in *SAP System Message : Error while reading a Dynpro*

    Hi,
    We are facing issues while logging-in through SAP logon 710.
    The system throws an error dialog box with the below message:
    SAP System Message : Error while reading a Dynpro
    At the OS level Java process  server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

    Hi Please find the contents of std_server.out below.
    stdout/stderr redirect
    node name   : server0
    pid         : 4124
    system name : KEC
    system nr.  : 01
    started at  : Mon Jul 27 15:44:57 2009
    [Thr 5656] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
    Loading: LogManager ... 250 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 47 ms.
    Loading: ThreadManager ... 16 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 93 ms.
    Loading: LockingManager ... 32 ms.
    Loading: ConfigurationManager ... 1032 ms.
    Loading: LicensingManager ... 0 ms.
    Loading: CacheManager ... 93 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service runtimeinfo started. (16 ms).
      Service cross started. (31 ms).
      Service file started. (31 ms).
      Service memory started. (31 ms).
      Service timeout started. (16 ms).
      Service trex.service started. (32 ms).
      Service userstore started. (0 ms).
      Service jmx_notification started. (15 ms).
      Service p4 started. (62 ms).
      Service classpath_resolver started. (16 ms).
      Service deploy started. (3722 ms).
      Service MigrationService started. (31 ms).
      Service bimmrdeployer started. (0 ms).
      Service log_configurator started. (5177 ms).
      Service locking started. (0 ms).
      Service http started. (126 ms).
      Service naming started. (157 ms).
      Service failover started. (16 ms).
      Service appclient started. (31 ms).
      Service javamail started. (47 ms).
      Service ts started. (47 ms).
      Service jmsconnector started. (47 ms).
      Service licensing started. (15 ms).
      Service connector started. (93 ms).
      Service iiop started. (94 ms).
      Service configuration started. (16 ms).
      Service webservices started. (265 ms).
      Service dbpool started. (1204 ms).
      Service UT started. (0 ms).
    Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
    Jul 27, 2009 3:45:09 PM  ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

  • EHPI installer: Error while reading a dynpro. Stuck at Start Shadow First.

    Hi Everyone,
    I am dead in the water with my test install of EhP5 using the most current installer.  This small test is on an older iseries, V5R4 with 8G memory. The SAP version is ECC 6.0 at sp Basis  23 and Applications at 19.
    The install stops at Start Shadow First, but the instance and work processes are up on the server.   The log- SAPehpiConsole reads:
    Severe error(s) occured in phase MAIN_SHADOW/START_SHDI_FIRST!
    Last error code set: RFC call to upg_is_shadow_system failed with key
    RFC_ERROR_SYSTEM_FAILURE (open): Error while reading a dynpro
    Please refer to these logs in the posted replys following this post for readability.
    The shadow system work process wp01 log showsan RFC error as follows:
    Wed Sep 14 11:29:58 2011
    ABAP Program SAPMSSY2                                .
    Source                                          Line 0.
    Error Code DYNPRO_READ_FAILED.
    Module  $Id: //bas/720_REL/src/krn/dynp/dyrdypdb.c#3 $ SAP.
    Function dy_dbread Line 100.
    RABAX: level LEV_RX_STDERR completed.
    RABAX: level LEV_RX_RFC_ERROR entered.
    RABAX: level LEV_RX_RFC_ERROR completed.
    RABAX: level LEV_RX_RFC_CLOSE entered.
    RABAX: level LEV_RX_RFC_CLOSE completed.
    RABAX: level LEV_RX_ERROR_SAVE entered.
    RABAX: level LEV_RX_ERROR_SAVE completed.
    RABAX: level LEV_RX_ERROR_TPDA entered.
    RABAX: level LEV_RX_ERROR_TPDA completed.
    RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    RABAX: level LEV_RX_END entered.
    RABAX: level LEV_RX_END completed.
    RABAX: end no http/smtp
    RABAX: end RX_BTCHLOG RX_VBLOG
    Error while reading a dynpro.
    C Wed Sep 14 11:33:59 2011
    C  *** ERROR => SQL-Error -204 in function db_open  (dbsldb4.cpp  10630)
    C  {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=}_0
    RABAX: level LEV_RX_IMC_ERROR entered.
    RABAX: level LEV_RX_IMC_ERROR completed.
    RABAX: level LEV_RX_DATASET_CLOSE entered.
    RABAX: level LEV_RX_DATASET_CLOSE completed.
    C  Reopen: FALSE
    B  *** ERROR => dbdynpdb2: dbdd_dbtab_columns (DYNPSOURCE) failed with rc = 4
    dbdynpdb2.c  2506]
    B  {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=00000000000000000000000000000000}_0
    B  ***LOG BZY=> unexpected return code 4          calling dbdd_dbtab [dbdynpdb     2508]
    So I have a problem communicating with the shadow. Or is it a problem with the db_open?
    From the test system I have an entry in SM59 to the shadow and I get this error when trying a connection test.
    Error Details     Error while reading a dynpro.
    And trying to logon to the client sends the same message, it does not bring up the login screen.
    OK. So in the 3 weeks that I have restarted, re-set and completely restored and restarted the install, I have always come to this point. I have search for similar issues and have done a review of pertinent notes etcu2026    Just as a comment, last year I successfully did the Ehp 4 upgrade without many problems on this same system using last years SAP system.   In the month that I have been trying to do this,  SAP has replaced the EHPI installer 3 times which indicates some problems on their part.
    Any comments or suggestions would be greatly appreciated.
    Pat

    The 2 logs from the installer are here.
    The STARTSFI is as follows:
    1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20110913144811")
    4 ETQ399 Set environment for standard connect:
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '14', GwService = 'sapgw14'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_db4_schema=SAPR3
    4 ETQ399   auth_shadow_upgrade=0
    1 ETQ206 Executing pre-phase DB specific actions.
    3 ETQ399 Fixing IFS authorities for '/usr/sap/TEH/EHPI/abap/exe'
    1 ETQ206 Executing pre-phase DB specific actions.
    1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
    4 ETQ399 Set environment for shadow connect:
    4 ETQ399 Set RFC variables for shadow connect:
    4 ETQ399 System-nr = '15', GwService = 'sapgw15'
    4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
    4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    4 ETQ399 Set tool parameters for shadow connect:
    4 ETQ399   default TPPARAM: SHADOW.TPP
    4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
    4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWI
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    2 ETQ399 Starting shadow instance
    4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
    2 ETQ231 RFC Login failed
    repeats the rfc call with a fail until this final entry.
    2EETQ399 Starting shadow instance failed
    2EETQ399 Test RFC failed finally
      The DEVTRACE.LOG is here:
    $                               Directory:    /usr/sap/TEH/EHPI/abap/log
    Name:         DEVTRACE.LOG
    trc file: "dev_disp.new", trc level: 1, release: "720"
    sysno      15
    sid        TEH
    systemid   327 (IBM i with OS400)
    relno      7200
    patchlevel 0
    patchno    100
    intno      20020600
    make       single threaded, ASCII, 64 bit, optimized
    profile    /usr/sap/TEH/EHPI/abap/TEH/SYS/profile/TEH_DVEBMGS15_omni
    pid        75851
    kernel runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
    length of sys_adm_ext is 376 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (15 75851) [dpxxdisp.c   1287]
    #shared lib "dw_xml.so" version 100 successfully loaded
    #shared lib "dw_xtc.so" version 100 successfully loaded
    #shared lib "dw_stl.so" version 100 successfully loaded
    #shared lib "dw_gui.so" version 100 successfully loaded
    #shared lib "dw_mdm.so" version 100 successfully loaded
    #shared lib "dw_rndrt.so" version 100 successfully loaded
    #shared lib "dw_abp.so" version 100 successfully loaded
    #shared lib "dw_sym.so" version 100 successfully loaded
    #shared lib "dw_aci.so" version 100 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    rdisp/dynamic_wp_check : 0
    rdisp/calculateLoadAverage : 1
    Tue Sep 13 14:48:58 2011
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  6404]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: write dp-profile-values into sys_adm_ext
    DpIPCInit2: start server >omni_TEH_15                             <
    DpShMCreate: sizeof(wp_adm)##17440#(1744)
    DpShMCreate: sizeof(tm_adm)##4976768#(24760)
    DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
    DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
    DpShMCreate: sizeof(comm_adm)##576064#(1136)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)##0#(104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)##0#(80)
    DpShMCreate: sizeof(vmc_adm)##0#(1856)
    DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
    DpShMCreate: sizeof(gw_adm)#48
    DpShMCreate: sizeof(j2ee_adm)#2032
    DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000050000000, size: 5759216)
    DpShMCreate: allocated sys_adm at 700000050000010
    DpShMCreate: allocated wp_adm_list at 700000050002970
    DpShMCreate: allocated wp_adm at 700000050002b60
    DpShMCreate: allocated tm_adm_list at 700000050006f90
    DpShMCreate: allocated tm_adm at 700000050006fe0
    DpShMCreate: allocated wp_ca_adm at 7000000504c6070
    DpShMCreate: allocated appc_ca_adm at 7000000504d3b40       
    Directory:    /usr/sap/TEH/EHPI/abap/log
    Name:         DEVTRACE.LOG
    DpShMCreate: allocated comm_adm at 7000000504e1610
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 70000005056e060
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated gw_adm at 70000005056e110
    DpShMCreate: allocated j2ee_adm at 70000005056e150
    DpShMCreate: allocated ca_info at 70000005056e950
    DpShMCreate: allocated wall_adm at 70000005056e9d0
    DpCommAttachTable: attached comm table (header=7000000504e1610/ft=7000000504e1620)
    DpSysAdmIntInit: initialize sys_adm
    rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
    dia token check not active (3 token)
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
    rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation std
    EsStdUnamFileMapInit: ES base = 0x7000000a0000000
    EsStdInit: Extended Memory 4096 MB allocated
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    mm.dump: set maximum dump mem to 96 MB
    DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
    MPI: dynamic quotas disabled.
    MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    Tue Sep 13 14:48:59 2011
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   13097]
    Tue Sep 13 14:49:02 2011
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( omni) [dpxxdisp.c   12339]
    MBUF state LOADING
    DpStartStopMsg: send start message (myname is >omni_TEH_15                             <)
    DpStartStopMsg: start msg sent
    Tue Sep 13 14:49:11 2011
    CCMS uses Shared Memory Key 73 for monitoring.
    CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Tue Sep 13 14:49:13 2011
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]
    MBUF state ACTIVE
    DpWpBlksLow: max wp blocks in queue is 800 (80 %)
    MBUF component UP
    DpMsgProcess: 1 server in MBUF
    DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
    Tue Sep 13 14:50:24 2011
    DpModState: change server state from STARTING to ACTIVE
    trc file: "dev_ms.new", trc level: 1, release: "720"
    [Thr 01] Tue Sep 13 14:48:39 2011
    [Thr 01] MsSOsPrivInit: Run priority adjusted to 12
    [Thr 01] ms/http_max_clients = 500 -> 500
    [Thr 01] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
    systemid   327 (IBM i with OS400)
    relno      7200
    patchlevel 0
    patchno    92
    intno      20020600
    make       multithreaded, ASCII, 64 bit, optimized
    pid        75850
    [Thr 01] Tue Sep 13 14:48:40 2011
    [Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 75850) [msxxserv_mt. 2274]
    [Thr 01] SigISetDefaultAction : default handling for signal SIGCHLD
    [Thr 01] load acl file = /usr/sap/TEH/EHPI/abap/TEH/SYS/global/ms_acl_info
    [Thr 01] MsGetOwnIpAddr: my host addresses are :
    [Thr 01]   1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
    [Thr 01]   2 : [127.0.0.1] LOOPBACK (LOCALHOST)
    [Thr 01] MsHttpInit: full qualified hostname = omni.plastekgroup.com
    [Thr 01] HTTP logging is switch off
    [Thr 01] MsHttpOwnDomain: own domain[1] = plastekgroup.com
    [Thr 01] *** I listen to port 3615 (3615) ***
    [Thr 01] CUSTOMER KEY: >H1357713078<
    [Thr 01] build version=720.2011.05.04
    trc file: "dev_rd", trc level: 1, release: "720"
    Tue Sep 13 14:49:07 2011
    ***LOG S00=> GwInitReader, gateway started ( 75855) [gwxxrd.c     1758]
    systemid   327 (IBM i with OS400)
    relno      7200
    patchlevel 0
    patchno    96
    intno      20020600
    make       single threaded, ASCII, 64 bit, optimized
    pid        75855
    gateway runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
    gateway (version=720.2011.04.20)
    Tue Sep 13 14:49:10 2011
    gw/reg_no_conn_info = 1
    gw/local_addr : 0.0.0.0
    gw/reg_no_conn_info = 1
    SWITCH TRC-RESOLUTION from 1 TO 1
    CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
    CCMS uses Shared Memory Key 73 for monitoring.
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Tue Sep 13 14:49:13 2011
    CCMS: Initalized shared memory of size 40000000 for monitoring segment.
    CCMS: Checking Downtime Configuration of Monitoring Segment.
    CCMS: AlMsUpload called by wp 1002.
    CCMS: AlMsUpload successful for /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/log/ALMTTREE (0 MTEs).
    Bind service sapgw15 (socket) to port 3315
    GwIRegInitRegInfo: reg_info file /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/data/reginfo not found
    GwPrintMyHostAddr: my host addresses are :
      1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
      2 : [127.0.0.1] LOOPBACK (LOCALHOST)
    Full qualified hostname = omni.plastekgroup.com
    DpSysAdmExtCreate: ABAP is active
    DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    DpIPCInit2: read dp-profile-values from sys_adm_ext
    DpShMCreate: sizeof(wp_adm)##17440#(1744)
    DpShMCreate: sizeof(tm_adm)##4976768#(24760)
    DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
    DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
    DpShMCreate: sizeof(comm_adm)##576064#(1136)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)##0#(104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)##0#(80)
    DpShMCreate: sizeof(vmc_adm)##0#(1856)
    DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
    DpShMCreate: sizeof(gw_adm)#48
    DpShMCreate: sizeof(j2ee_adm)#2032
    DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000060000000, size: 5759216)
    DpShMCreate: allocated sys_adm at 700000060000010
    DpShMCreate: allocated wp_adm_list at 700000060002970
    DpShMCreate: allocated wp_adm at 700000060002b60
    DpShMCreate: allocated tm_adm_list at 700000060006f90
    DpShMCreate: allocated tm_adm at 700000060006fe0
    DpShMCreate: allocated appc_ca_adm at 7000000604d3b40
    DpShMCreate: allocated comm_adm at 7000000604e1610
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 70000006056e060
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated gw_adm at 70000006056e110
    DpShMCreate: allocated j2ee_adm at 70000006056e150
    DpShMCreate: allocated ca_info at 70000006056e950
    DpCommAttachTable: attached comm table (header=7000000604e1
    MtxInit: -2 0 0
    DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 fro
    Tue Sep 13 14:50:14 2011
    GwDpInit: attached to gw_adm at 70000006056e110
    Tue Sep 13 14:50:16 2011
    DpSetProcessPriority: Run priority for gwrd adjusted to 12

  • Urgent Help Req.: Exception=ORABPEL-11162 Error while reading native data

    Hi All,
    I am getting below error: Exception=ORABPEL-11162
    Error while reading native data.
    [Line=6, Col=7|http://forums.oracle.com/forums/] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
    Ensure that there is enough data from the specified position in the input.
    Let me also give you the brief scenario of what I am trying to achieve.
    INTERFACE FUNCTIONING:_
    I have an interface which reads the records in a file in a chunk through ChunkRead adapter and and after one successful reading if chunk it calls the DB adapter to insert the records in the table.
    Now these records are committed and next chunk is read and the process goes on till all the records are read.
    After this the API is called which does the processing of these records.
    Inserting records in the DB is a XA transaction which means if anything goes wrong while inserting the data, the records which are added earlier are rolled back.
    ISSUE:_
    Now the issue comes when I do the negative testing. Since my file is based on fixed length schema., I change the length of last record from 15 to 13. (say total are 10 records)
    Now what happens is when chunkread tries to read the record of 15 length it gets only 13 characters and hence ignores the records.
    But the chunkread reads all other 9 records correctly and sends this to DB adapter which now inserts them correctly in the DB.
    But being a global transaction I want that if any record is missing from DB in comparison to those in file then whole transaction should roll back.
    So I am unable to make this whole process as global transaction. This is because the ChunkRead adapter inspite of detecting the error doesn&rsquo;t throw it back.
    Moreover if this problem occurs in say next chunk then also I am unable to find out how to rollback the whole transaction. Because the first chunk was correct.
    So basically two concerns are there:+
    How to detect that chunkread adapter has missed one record?+
    Secondly, If it&rsquo;s detected then how should I rollback the transaction that caused earlier records to enter into database?+
    Please let me know if anyone has faced this issue earlyer and how it got resolved. Any pointers regarding this would be of great help.
    Also attached is the chunkread log for reference.
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>tip</COMPONENT_ID>
    <MSG_TYPE TYPE="TRACE"></MSG_TYPE>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>usmlrh01.xyz.com</HOST_ID>
    <HOST_NWADDR>192.168.245.39</HOST_NWADDR>
    <MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
    <THREAD_ID>57</THREAD_ID>
    <USER_ID>orasoa</USER_ID>
    </HEADER>
    <CORRELATION_DATA>
    <EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
    </CORRELATION_DATA>
    <PAYLOAD>
    <MSG_TEXT>JCA: FileRejector::rejectTextualMessage errList=[oracle.tip.pc.services.translation.xlators.nxsd.ErrorList@a5213b]</MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>tip</COMPONENT_ID>
    <MSG_TYPE TYPE="TRACE"></MSG_TYPE>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>usmlrh01.xyz.com</HOST_ID>
    <HOST_NWADDR>192.168.245.39</HOST_NWADDR>
    <MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
    <THREAD_ID>57</THREAD_ID>
    <USER_ID>orasoa</USER_ID>
    </HEADER>
    <CORRELATION_DATA>
    <EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
    </CORRELATION_DATA>
    <PAYLOAD>
    <MSG_TEXT>JCA: FileRejector::rejectTextualMessage badCount=[1]</MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2008-10-06T09:23:58.467-04:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>tip</COMPONENT_ID>
    <MSG_TYPE TYPE="TRACE"></MSG_TYPE>
    <MSG_LEVEL>1</MSG_LEVEL>
    <HOST_ID>usmlrh01.xyz.com</HOST_ID>
    <HOST_NWADDR>192.168.245.39</HOST_NWADDR>
    <MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
    <THREAD_ID>57</THREAD_ID>
    <USER_ID>orasoa</USER_ID>
    </HEADER>
    <CORRELATION_DATA>
    <EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
    </CORRELATION_DATA>
    <PAYLOAD>
    <MSG_TEXT>JCA: Rejecting message fileName=/rh01/s01/n01/Distributions/B2B/Gentran/In/855/Test.txt, startLine=4, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11162
    Error while reading native data.
    [Line=6, Col=7] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
    Ensure that there is enough data from the specified position in the input.
    }</MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>
    PFB the version details :
    SOA suite version : 10.1.3.3.1 and JDEV : 10.1.3.3
    Edited by: SOA Team on Oct 6, 2008 10:48 PM

    Just a thought, you could set the terminator for the last field as {eol} instead of length, this means that it should read the last field regardless of the length.
    Depending on the logic of Db adapter the error could be traped due to incorrect length.
    If the file starts each row with a constant(s), e.g. 01 then you can terminate the previous line on that, this is the better option but relys on the file format.
    The other option is a little thing call compensation, ouch. Basically this allows you to back out commited rows but you have to provide all the logic, it is generally something people avoid because of the complexity.
    cheers
    James

  • 3-1674105521 Multiple Paths error while using Bridge Table

    https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
    Customer Smiths Medical International Limited
    Description: Multiple Paths error while using Bridge Table
    1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
    2. They found found out by adding these 3 joins, they ended with circular error.
    [nQSError: 15001] Could not load navigation space for subject area GXODS.
    [nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
    In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
    3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
    Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
    Thanks
    Teik

    The strange thing compared to your output is that I get an error when I have table prefix in the query block:
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_FULL_01":  system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
    ORA-38500: Unsupported operation: Oracle XML DB not present
    Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
    And if I remove it, it works:
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_FULL_01":  system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    . . imported "SYSADM"."TMP3"                             5.406 KB       1 out of 2 rows
    Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
    Nicolas.
    PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

  • Error while reading ID of own business system from the SLD for system DPI

    Hi All,
    My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
    In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
    Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
    Please help me out.
    Thanks
    Kiruthi
    Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

    Hi,
    Check transaction SLDAPICUST for correct SLD configuration.
    http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
    ~Sanv...

  • MDS-00521 - error while reading the document  in Oracle ADF at Runtime

    Hi All,
    we are using Jdeveloper Version : Oracle JDeveloper 11g 11.1.1.5.0
    we are getting below error message while opening the page at run time.
    MDS-00521 : error while reading the document app1/screen1.jsff from metadata repository.
    MDS-00569 : unable to read document app1/screen1.jsff from file "D:Oracle/Middleware11115_1/user_projects/domains/j2eeprd1/servers/app1j2eeprd1/.....
    WEB-INF/Lib/ADFViewControllerapp1.jar!/app1/screen1.jsff
    Note : we disable 1) Enable User Customizations and 2) Enable seeded customization in Project properties -> ADF View
    can you please help us to resolve this issue.!
    Thanks,

    This seems issue with MDS schema. You can try two things:
    - Restart everything again (database and admin server as well)
    - If above doesn't solve you problem. then there must problem while creating schema using RCU. Run RCU utility again, drop and recreate schema and reconfigure OIM.
    This is what I suspect. Other experts can jump in with better solution.
    regards,
    GP

  • Error while reading data for reporting

    Hi Gurus,
    I tried to get answer from the forums but not got exact answer to slove my issue..
    Q: I had generated 10 reports on Multiprovider(Virtual cube + std Cube) on Bex analyzer.
          But when i am Executing reports 3 reports are getting result where remaining 7 reports are throughing same error.
    Error: error reading the data of infoprovider
    error system error: no more storege space available for extending an internal table
    error massage from data source XXXXXX from Source system XXX
    error error occured during parallel processing
    error error while reading data, navigation is possible
    Where their are no parallel processing are going.
    the 3 reports are taking 15 min to generate the report..
    data is available in both sources with same selection options.
    Can any one please through some light, what exactly need to do to get all the reports and to reduce the response time.
    thanks in advance.
    Sandy

    Hi,
    The problem was solved.
    I had given restriction on 0COUNTRY with out calling Company code in the Column.
    Were 0COUNTRY is also an attribute of 0COMP_CODE.
    so i called both in the report and got the report with results...
    this is how i solved the issue.
    Thanks
    Sandy

  • BAPI_ALM_ORDER_MAINTAIN - Error while reading the standard sequence

    Hi all,
    I am using BAPI_ALM_ORDER_MAINTAIN to add the task list to the order without deleting the existing operations but BAPI_ALM_ORDER_MAINTAIN is giving the error - Error while reading the standard sequence from the document. Please help asap.
    Thanks,
    Ritu

    I Solved this form.
    Table I_N_METHODS
    REFNUMBER   OBJECTTYPE   METHOD      OBJECTKEY
    000001                                    SAVE          000001000069
    000001           OPERATION     CREATE       0000010000690170
    000002           OPERATION     CREATE       0000010000690180
    000003           OPERATION     CREATE       0000010000690190
    000004           OPERATION     CREATE       0000010000690200
    000005           OPERATION     CREATE       0000010000690210
    Edited by: Yonatan Edgardo Diaz on Apr 16, 2010 4:01 PM

Maybe you are looking for

  • No sound on Boot Camp (Windows 8) red light in the headphone jack ?

    I have a MacBook Pro 9.2 (i7 3rd gen, HD4000, 750GB, 8GB) and i install Windows 8 Pro 64 bit. I have a issue with my headphone jack only when i use BootCamp i have the latest driver for it (download from bootcamp application OSX). I see that inside o

  • Difference b/w requiresNew & required

    Hi Q 1)Can any one elaborate the Difference b/w requiresNew & required in BPEL Q 2)when i am using faultPolices for BPEL it is supporting only when BPEL is in requiresNew

  • Thoughts on new magic mouse

    hi I just have received my new iMac 27" today and am really overwhelmed. the only thing one needs to get used to is the new magic mouse. the fact that the scrollball click and the 2 buttons on the side are missing, means that there are 2 options less

  • Primary and DG in different version

    Hi i want to try to use 10g primary with 11g stanby. In doc i read : The following conditions must be met before you can use the broker: ■ The primary and standby databases must be using the same version of Oracle Database 11g and each can be install

  • Where is my Printer Spool file ?

    I have a Mac Pro with 10.5.2 - and I print with 3 large Epson pritners. I had a print that started to print (Photoshop CS3)- and I saw that it was not what I wanted. I canceled the print in the Epson icon (on the dock) - and I shut down the printer a