DAC "Generating parameters..." never returning back??
Hi All,
I am trying to generate parameters for an execution plan in DAC - after hitting Generate - it opens a small popup window with "Generating Parameters.... Please wait...." and it never returns back. I created another new container, execution plan and still same issue.....
how to solve this issue......
Thanks for your time.
Hi Svee,
I am working on my own and no oracle support account so - no patches......i am trying to load HR and Fin and facing lot of issues - for many issues patch is the right way.......
Is there any way to get these patches for personal use?
Thanks for you reply.
Similar Messages
-
DAC Generate Parameters and Build Commands
Hi everyone,
Can someone explain the differences between the generate parameters and the build commands?
My initial thought was that generate parameters generated the Informatica parameter files. But then I couldn't figure out what the purpose of the Build command was.
Any clarification would be appreciated. Thanks!
-JoeWhen you see your ETL folders they are arranged depending upon the type of tasks SDE, SIL, PLP, etc. If you buy the OOB Oracle BI Apps they come with prebuilt ETL routines. These are meant to plug and play as adaptors depending on your source. The product also allows you to extract data from multiple sources hence different SDE folders. These are then assigned to Logical Folders in DAC. Every task you created is linked to an ETL workflow and is assigned to a Logical folder.
Now the workflows can be run manually from the ETL Tool or through DAC. When you run them to DAC it uses the Source and Target connection parameters from the Physical Data Sources tab in the Setup section denoted by the $ sign.
Generate Parameters looks at every task in your execution plan and checks what the $Source & $Target Parameters it needs. If your plan has SDEs, SILs, PLPs and then come from three sources (2 OLTPs, 1 Flat file) and 1 destination (DW) then you'll get 4 connection parameters, plus every folder associated with your ETL tasks. e.g SDE_ORA11510_Adaptor, SILOS, PLP, CUSTOM_SDE_ORA11510, CUSTOM_PLP, CUSTOM_SILOS. Then you can set which source you want to extract from and which target you want to send your data to.
Build on the other hand handles the dependencies. It is very important you set your Source Tables, Target Tables and the Task type at every task appropriately. It uses this to logically arrange the concurrency and dependencies of tasks. -
MobileService.SyncContext.PushAsync never returns in Release build
I am currently trying to create a windows phone app with azure mobile services but somehow offline sync is not working. When I create a release build and call await SyncContext.PushAsync() it never returns back to the context.
I dont really know what is happening,
Code:
await App.MobileService.SyncContext.PushAsync();
return true;
When I run a debug build everything works fine.
I can't understand, whats happening in Release mode?
Its a very urgent. Please provide a quick solution or setup a call with me.
Thanks,
Hema
hemaThank you for the answer, I added HttpMessageHandler to check which operation was causing the problem and a IMobileServiceSyncHandler, as I mentioned earlier when there is nothing to Push the syncing work fine and the pull can be made, but when the push
needs to send data the request passes by OnPushCompleteAsync and does not get to the LoggingHandler.SendAsync or to the ExecuteTableOperationAsync and on the Output console I can see the following exceptions are thrown but the PushAsync does not fail and never
ends.
A first chance exception of type 'System.Resources.MissingManifestResourceException' occurred in mscorlib.ni.dll
A first chance exception of type 'System.Resources.MissingManifestResourceException' occurred in mscorlib.ni.dll
A first chance exception of type 'System.Resources.MissingManifestResourceException' occurred in mscorlib.ni.dll
A first chance exception of type 'System.Resources.MissingManifestResourceException' occurred in mscorlib.ni.dll
A first chance exception of type 'System.Resources.MissingManifestResourceException' occurred in mscorlib.ni.dll
A first chance exception of type 'System.Resources.MissingManifestResourceException' occurred in mscorlib.ni.dll
A first chance exception of type 'System.Resources.MissingManifestResourceException' occurred in mscorlib.ni.dll
The thread 0x1080 has exited with code 259 (0x103).
About the UI, this operation is triggered by the user (button) and is handle in an ICommand in a way that can only be triggered once and locked from other processes with a SemaphoreSlim, I add a little part of the sync code.
await this.MobileServiceClient.SyncContext.PushAsync(cancellationToken);
var query = SyncItemTable.CreateQuery().Where(syncItem => syncItem.UserId == userId);
await SyncItemTable.PullAsync("PullSyncItem", query, true, cancellationToken);
I am using the nugets WindowsAzure.MobileServices, 1.3.1 and WindowsAzure.MobileServices.SQLiteStore, 1.0.1
I appreciate a quick response this is a stopper bug for the next release of our application. -
I made an in app purchase and never received what I was supposed to. I contacted the producers of the app and they never got back to me. I then contacted apple and they said they would return my 25$ purchase. I still haven't gotten it. I am starting to feel like I just lost 25 dollars and both companies are sweeping it under the bus. I don't know what to do now. What should I do?!?!
We are users like yourself. You are not speaking to Apple here. We are not able to help. Please call Apple to inquire.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
This is totally insane!! They took someone's money in a sec by 'MISTAKE' but haven't returned after 10days.
I already have chatted with two staffs about this but different from what they promised, this still has not solved yet!
My devoted time for this was totally wasted and I am still in suffering.
I think this is theft!!! What shall I do more?!I am really sorry to bring this issue to the forum but had no choice. Like I mentioned above, I already have contacted them but never returned me back. Sick of chatting with those staffs who act like answering machine and wasting my time because of their mistake. After I finally decided to post this last night, then they called me this morning that I have to wait 5days more.
Sorry again, and thanks for your reply.
J -
Packing Material returned back to inventory
Hi,
Our client uses standard costing for all materials. We have a scenario where material is packed in drums. The drums are then returned back into inventory as the material is despatched to the customer packed in a different form. A drum rate per pound of production is loaded into the standard cost of the packed material. The problem now is that the inventory of the used drum is in a balance sheet account while the credit for drum cost on production goes to the P&L account. Is there some method by which only that portion of the drum cost on production can be credited to a reserve account?
I was thinking i could apply an overhead rate on the packed material and credit it to an internal order and end of month settle to a balance sheet account. But overhead cannot be provided on output, rather it is based on input. is there some way by which I could use template allocation to credit an order andd debit the production order? Or is there some other better method?
Thanks,
ShivramHi
I myself never used it, but I know it can be used to allocate OH based on Output....
refer this thread for more details... Re: Activity Type Planning on the basis of Raw materials
Moreover, I would prefer to use a work around as below, which I used in a similar scenario
1. Convert the Drums into Fixed Asset... The FA recon account can be "Inventory of Drums".. Dont club this account under FA in your Financial St Version in FI
2. Assign a Manual Dep Key in this asset masters... i.e. You can manually post the Depreciation of these assets as per your choice
3. Post this entire dep into one cost center... Later on allocate it to the Prod orders or absorb it as an overhead using costing sheet
To make it more simpler, assign an activity type "PRDQTY" in your Routing.... This PRDQTY will record your Prod Qty....
The Activity Qty of this PRDQTY will be equal to your Base Qty of the routing.... So, whatever output you confirm on the Prod order in CO11N, the same amount of Act Qty will also get confirmed
Then calculate the Act Price for this act type which will be Depreciation amount for wear n tear / Prod Qty.... THIS IS EXACTLY WHAT YOU WANT!!
Br, Ajay M -
4.51 new InitialContext never returns
4.51 new InitialContext never returns
When I do a "new InitialContext" in my client test program, it never
returns
when run on solaris or linux, it works fine on NT.
Another symptom of the same problem is that a LIST command of
weblogic.Admin works
on NT but never returns on Solaris or Linux.
VERSION and SHUTDOWN work on NT, Solaris and Linux.
also note that on linux with ibm 1.1.8 jdk, I completely re-loaded the
weblogic
with only the system password changed in the weblogic.properties file
(just to
make sure I did not accidently put something in the properties file to
cause
the problem)
here is the some raw data, I do relaize that some of these combinations
are not certified (none of the Solaris or Linux combinations worked).
Sun Ultra10 2.5.1 with jdk1.1.8 no service pack
Sun Ultra10 2.5.1 with jdk1.1.8 service pack 8
Sun Ultra10 2.5.1 with jdk1.1.7 service pack 8
Windows NT 4.0 service pack 6a javasoft jdk1.2.2 weblogic service pack 7
linux (redhat 6.2 with blackdown jdk1.2.2)
linux (redhat 6.2 with ibm1.1.8 jdk)
changes to weblogic.properties:
weblogic.system.password=syspword
to startup weblogic:
export PATH=$PATH:/usr/local/jdk118/bin
export JDK_HOME=/usr/local/jdk118
export
CLASSPATH=./classes:./lib/weblogicaux.jar:./myserver/serverclasses
./startWebLogic.sh
code segment from client program:
static public Context getInitialContext()
Context returnValue = null;
Properties p;
p = new Properties();
p.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.TengahInitialContextFactory");
p.put(Context.PROVIDER_URL,"t3://207.112.33.206:7001");
try
System.out.println("getting initial context");
returnValue = new InitialContext(p);
System.out.println("got initial context");
catch (NamingException ex)
System.out.println("exception");
System.out.println("NamingException " +
ex.getMessage())
ex.printStackTrace();
catch (Exception ex)
System.out.println("exception");
return returnValue;
results of running the client program:
getting initial context
the client program never returns
check linux version:
[jack@linux01 test]$ uname -a
Linux linux01.delfour.com 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 i586
unknown
check weblogic version on NT:
[jack@linux01 test]$ java weblogic.Admin t3://207.112.33.203:7001
VERSION
WebLogic Build: 4.5.1 Service Pack 7 02/16/2000 15:17:50 #63218
check weblogic version on linux:
[jack@linux01 test]$ java weblogic.Admin t3://localhost:7001 VERSION
WebLogic Build: 4.5.1 09/30/1999 17:41:18 #53704
test one: linux client to linux server:
[jack@linux01 test]$ java weblogic.Admin t3://localhost:7001 PING 1 1
Sending 1 ping of 1 byte.
RTT = ~741 milliseconds, or ~741 milliseconds/packet
test two: linux client to linux server:
[jack@linux01 test]$ java weblogic.Admin t3://localhost:7001 LIST
weblogic system bogus
Setting credentials
An AuthenticationException occurred that prevented access to the given
name in the naming service. The username/password you supplied is not
authorized for thi
s operation.
test three: linux client to linux server:
[jack@linux01 test]$ java weblogic.Admin t3://localhost:7001 LIST
weblogic syste
m syspword
Setting credentials
after 5 minutes, still no response
test four: linux client to NT server:
[jack@linux01 test]$ java weblogic.Admin t3://207.112.33.203:7001 LIST
weblogic system password
Setting credentials
Contents of weblogic
fileSystem:
weblogic.jndi.toolkit.ReplicatedWLContext:weblogic.jndi.toolkit.WL
[email protected]:[7001,7001,7002,7002,-1]
NameBas
edFailOverHandler (name: weblogic.fileSystem, env:
weblogic.jndi.Environment@806
05d5
ejb:
weblogic.jndi.toolkit.ReplicatedWLContext:weblogic.jndi.toolkit.WLContext
[email protected]:[7001,7001,7002,7002,-1]
NameBasedFailO
verHandler (name: weblogic.ejb, env: weblogic.jndi.Environment@80605d5
common:
weblogic.jndi.toolkit.ReplicatedWLContext:weblogic.jndi.toolkit.WLCont
[email protected]:[7001,7001,7002,7002,-1]
NameBasedFa
ilOverHandler (name: weblogic.common, env:
weblogic.jndi.Environment@80605d5
jdbc:
weblogic.jndi.toolkit.ReplicatedWLContext:weblogic.jndi.toolkit.WLContex
[email protected]:[7001,7001,7002,7002,-1]
NameBasedFail
OverHandler (name: weblogic.jdbc, env: weblogic.jndi.Environment@80605d5
jts:
weblogic.jndi.toolkit.ReplicatedWLContext:weblogic.jndi.toolkit.WLContext
[email protected]:[7001,7001,7002,7002,-1]
NameBasedFailO
verHandler (name: weblogic.jts, env: weblogic.jndi.Environment@80605d5
server:
weblogic.jndi.toolkit.ReplicatedWLContext:weblogic.jndi.toolkit.WLCont
[email protected]:[7001,7001,7002,7002,-1]
NameBasedFa
ilOverHandler (name: weblogic.server, env:
weblogic.jndi.Environment@80605d5
rmi:
weblogic.jndi.toolkit.ReplicatedWLContext:weblogic.jndi.toolkit.WLContext
[email protected]:[7001,7001,7002,7002,-1]
NameBasedFailO
verHandler (name: weblogic.rmi, env: weblogic.jndi.Environment@80605d5
jms:
weblogic.jndi.toolkit.ReplicatedWLContext:weblogic.jndi.toolkit.WLContext
[email protected]:[7001,7001,7002,7002,-1]
NameBasedFailO
verHandler (name: weblogic.jms, env: weblogic.jndi.Environment@80605d5
jndi:
weblogic.jndi.toolkit.ReplicatedWLContext:weblogic.jndi.toolkit.WLContex
[email protected]:[7001,7001,7002,7002,-1]
NameBasedFail
OverHandler (name: weblogic.jndi, env: weblogic.jndi.Environment@80605d5
here is the end of the weblogic traces after a single LIST on linux:
Sun May 07 09:40:34 EDT 2000:<I> <WebLogicServer> Server loading from
weblogic.c
lass.path. EJB redeployment enabled.
Sun May 07 09:40:44 EDT 2000:<I> <WebLogicServer> Event handler log
started (reg
id: 1)
Sun May 07 09:40:44 EDT 2000:<I> <WebLogicServer> Invoking main-style
startup we
blogic.jdbc.common.internal.JdbcStartup
weblogic.jdbc.common.internal.JdbcStartu
p
Sun May 07 09:40:48 EDT 2000:<S> <SSLListenThread> 2 certificate(s):
fingerprint = 88dae49f1a3122e62e7a94a3dc76fbf0, not before = Tue Oct
26 15:03:
00 EDT 1999, not after = Tue Oct 24 15:03:00 EDT 2000, holder = C=US
SP=Californ
ia L=San Francisco O=WebLogic CN=weblogic.beasys.com
[email protected]
, issuer = C=US SP=California L=San Francisco O=WebLogic OU=Security
CN=Demonstr
ation Certificate Authority [email protected] , key = modulus =
65 byte
Bignum
value=00959b5668811e78a28a018631455f5bd4f51b0e3e77b79dcb7a4c67c31a8f94b0
4bce347b731121da27918dd36bce8f1f0b77cd7944ecbd3d517baa3a83dcce8b,
exponent = 3 b
yte Bignum value=010001
fingerprint = f1c530f7211410a2220c7e9d3152b496, not before = Tue Oct
26 14:18:
53 EDT 1999, not after = Wed Oct 25 14:18:53 EDT 2000, holder = C=US
SP=Californ
ia L=San Francisco O=WebLogic OU=Security CN=Demonstration Certificate
Authority
[email protected] , issuer = C=US SP=California L=San
Francisco O=WebL
ogic OU=Security CN=Demonstration Certificate Authority
[email protected]
om , key = modulus = 65 byte Bignum
value=00b6743b62ce13992324b18d8061d24457ff90
5b7e8aaceef6bef802b6f8a1e176f9791d571f14df79e9dd40f1f8e83e9e41048f05f931fe07dc06
2f19ac20fa93, exponent = 3 byte Bignum value=010001
Sun May 07 09:40:48 EDT 2000:<I> <SSLListenThread> Using exportable
strength
SSL
Sun May 07 09:40:50 EDT 2000:<I> <JMS> Beginning startup process
Sun May 07 09:40:50 EDT 2000:<I> <JMS> Init JMS Security
Sun May 07 09:40:51 EDT 2000:<I> <JMS> Startup process complete. JMS is
active
Sun May 07 09:40:51 EDT 2000:<I> <WebLogicServer> Invoking main-style
startup RM
I Registry weblogic.rmi.internal.RegistryImpl
Sun May 07 09:40:51 EDT 2000:<I> <RMI> Registry started
Sun May 07 09:40:52 EDT 2000:<I> <EJB> 0 EJBs were deployed using .ser
files.
Sun May 07 09:40:52 EDT 2000:<I> <EJB> 0 EJBs were deployed using .jar
files.
Sun May 07 09:40:53 EDT 2000:<I> <ZAC> ZAC ACLs initialized
Sun May 07 09:40:53 EDT 2000:<I> <ZAC> ZAC packages stored in local
directory ex
ports
Sun May 07 09:40:54 EDT 2000:<I> <ListenThread> Listening on port: 7001
Sun May 07 09:40:57 EDT 2000:<I> <SSLListenThread> Listening on port:
7002
Sun May 07 09:40:58 EDT 2000:<I> <WebLogicServer> WebLogic Server
started
Sun May 07 09:41:09 EDT 2000:<I> <ListenThread> Adding address:
linux01.delfour.
com/207.112.33.206 to licensed client list
Sun May 07 09:41:12 EDT 2000:<I> <RJVM> Creating connection to
localhost/127.0.0
.1 -1260680115049870327
I hope someone can shed some light on this...
- Rob (jack) LapenseeIt looks like you are modifying the object you are iterating over while you are iterating... not good. Say your gp only had one element, a LINE_TO. It will run through and call another LINE_TO in the switch, thus when it comes back to the while, there is a newly added point to interpret, so the iterator will never finish. Usually, most components throw a ConcurrentModificationException when this happens for this type of case. I'm not sure why the PathIterator doesn't.
In short, use a different reference in the loop then the one you are iterating over.
-JBoeing -
Recursive WITH (Recursive Subquery Factoring) Never Returns
11.2.0.2 database on Windows, SQL Developer Version 3.2.20.09, build MAIN-09.87 (Database and SQL Developer are on the same machine. I have also tried connecting to a Linux 11.2 database and have the same results.)
I've been doing some simple testing with recursive WITH (Recursive Subquery Factoring) and when I run this following statement in SQL*Plus it returns instantly. However when running in SQL Developer it never returns, I've let it run for quite a long time (172 seconds) and gotten nothing, I finally kill the statement. Once I ran it and even killing the job didn't come back. I can get an explain plan but if I try to run it, run as script or autotrace it never returns. I have only one plan in the plan_table for this test, and it's only 4 lines long. No errors, no messages.
WITH get_plan (query_plan, id, planlevel) as
select ' '||operation||' '||options||' '||object_name query_plan, id, 1 planlevel
from plan_table
where id = 0
union all
select lpad(' ',2*planlevel)||p.operation||' '||p.options||' '||p.object_name query_plan, p.id, planlevel+1
from get_plan g, plan_table p
where g.id = p.parent_id
SELECT QUERY_PLAN FROM GET_PLAN ORDER BY PLANLEVEL;Hi Jeff, using either give the same results. The query is "running", as is the little graphic with the bouncing gray bar is moving back and forth saying either "Query Results" or "Scriptrunner Task" as appropriate.
OK this is odd. I run a count(*) on plan_table in SQL*Plus and get 4, in SQL Developer I get 487. Hun? That makes no sense I'm connect as the same user in each. Where are all these other entries coming from and why can't I see them in SQL Plus? Does SQL Developer have it's own PLAN_TABLE?
**EDIT --- Yes that seems to be the case. The PLAN_ID I see in SQL Plus doesn't even exist in the SQL Deveropler version of the table. OK that's good to know. I assume the plan_table for SQL Developer is local to it somehow? It's not in the database as best I can see.
Edited by: Ric Van Dyke on Feb 7, 2013 5:19 PM -
Spatial 9.0.1.2 SDO_DISTANCE never returns
Query:
select sdo_geom.SDO_DISTANCE (mdsys.sdo_geometry(2001, 8307, mdsys.sdo_point_type(28,235 -26,NULL), NULL, NULL),
mdsys.sdo_geometry(2001, 8307, mdsys.sdo_point_type(28, -26,NULL), NULL, NULL),
0.005) as distance from dual
On oracle 817 returns :235
on oracle 9012 the query never return a value
Thanks
WernerWerner,
Do you mean that the distance comes back as zero ?
If that is the case, there is a known bug in distance
that is causing this problem. This is fixed in the
9.0.1.3 patch set, so applying that patch would help.
siva -
Hi, how can i return back safari default search engine?
How can I return back safari default search engine? It has been changed after trying to download adobe flash player.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
Writing a Procedure to return back XML. Please help.
Hello,
I am writing a procedure in Oracle 10G,that will return back an XML
to me.
I am passing 2 parameters to this procedure (a Quantity and a Price) and these parameters are element values of the XML that will be returned.
My Query is :
1) How can the arguments being passed to the procedure become element values.
2) Is my procedure to return back the XML correct.? Please can someone modify this procedure?
Please can someone help me with this procedure as this is a PROD issue.
Help really appreciated.
PROCEDURE getTradeXML(qty IN VARCHAR2,price IN VARCHAR2 xml IN OUT CLOB)
IS
xml CLOB;
BEGIN
xml = 'SELECT XMLELEMENT("Trade", XMLELEMENT("Quantity",qty),
XMLELEMENT("Price", price))
FROM DUAL'
END;PROCEDURE getTradeXML(qty IN VARCHAR2,price IN
VARCHAR2 xml IN OUT CLOB)
IS
xml CLOB;
BEGIN
xml = 'SELECT XMLELEMENT("Trade",
XMLELEMENT("Quantity",qty),
MLELEMENT("Price", price))
FROM DUAL'maybe you want
SELECT XMLELEMENT("Trade", XMLELEMENT("Quantity",qty), XMLELEMENT("Price", price)) into xml FROM DUAL;
/*not tested*/ -
Usb cable never returned now i cant get any "parts" for my ipod
I ordered a USB cable for my ipod and i never returned it
and now i want to get new headphones but i cant because i didn't send the cable back..
can anyone help?
thanx :]
Ipod 5th Generation 30GB Windows XPI do not understand your question.. ordered a usb cable from who? why would you have to return it?
KoDor -
Help Needed: Returning Back to Windows 8 after downgrading to Windows 7
Hi guys, im just new here.
I have a MSI GE40 gaming laptop which I bought 2 months back.
Within those 2 months of usage, I always encounter my laptop to be very slow in shutting down. It always take, maybe up to 10 minutes to fully shut down. The screen goes black but the power button stays on orange color, & as I said, it takes a long time for the power button to be completely unlit. But for start up, its blazing fast.
Thinking that windows 8 itself is the culprit of super slow shutting down, I searched the net on how to downgrade to windows 7.
Of course I did make a back up first on a 16gb usb flash drive using the pre-installed recovery software from MSI which was completed successfully.
Then I made some tweaks on the bios (ie select legacy & disable secure boot) & boot using windows 7 installation DVD, deleted all partitions (since the notebook comes with GPT partition) to be able to install windows 7. I installed all the drivers which I downloaded from MSI website specific to my notebook.
But the problem is not solved, it is still very slow in shutting down, & now even boot up becomes very slow too.
So I downloaded & execute the firmware & bios for windows 7 from msi website (again, specific to my model). But still the same, the notebook is still very slow both in shutting down & start up.
So I decided to go back again to windows 8, I tried to boot from the flash drive (I adjusted from the bios & make the flash drive to be the first priority) but it did not boot from it. I tried F11 on start up & selected to boot from usb flash drive but again, to no avail.
So the last one I did was downloaded windows 8, make a bootable flash drive out of it, boot from it and luckily, I succeed - I have now again a windows 8 msi ge40 laptop.
But I wanted my laptop to be reinstated to factory setting, i.e, all preinstalled softwares are there, the bios is default for windows 8. So I tried to update the bios to the one for windows 8 again (since I downgraded the bios to the one for windows 7 when I downgraded the OS to windows 7). But I could not update the bios, the laptop is not booting from usb flash drive containing the bios.
I tried also to recover using F3 on start up but the system does not recognize the flash drive (with system back up). I tried also on PC settings but to no avail.
Now guys, I need your help.
How can I return back my laptop to default factory settings?
Thank you.
(sorry for my not so good English)Hello:
I think it's not only about the OS version, you need to return this back to your shop to repair with the slow shot down issue, because the OS should be shot down in 30 seconds, far from your GE40 times. -
How to call an alv report from another program and return back
Hello ,
I am calling one abap program (Prgm B) from another program (Prgrm A).
Here, Prgm B is an ALV report. I have fetch some data from Prgem B that gets stored in an internal table.
Now, I am using below code in Prgrm A,
SUBMIT Prgrm B VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar
EXPORTING LIST TO MEMORY
AND RETURN.
When Prgrm A executed, it lead me to selection screen of Prgrm B and when I click F8, it shows me the report output, In short, it doesnt return back to Prgrm A. It ends up showing me the alv report if Prgrm B even afetr using RETURN statement.
I want to get back to Prgrm A by fetching some data from Prgrm B.
Please let me know, if i am missing something.
Regards,
SeemaHi Seema,
Refer below code.
DATA: v_matnr LIKE mara-matnr.
DATA: t_listobject TYPE abaplist OCCURS 0 WITH HEADER LINE.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_ascilist OCCURS 0,
line(200).
DATA: END OF t_ascilist.
data var(3) type c.
SELECT-OPTIONS: s_matnr FOR v_matnr.
var = ' 3'.
START-OF-SELECTION.
SUBMIT ztestaks1 WITH s_matnr IN s_matnr EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = t_listobject
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
CALL FUNCTION 'LIST_TO_ASCI'
* EXPORTING
* LIST_INDEX = -1
* WITH_LINE_BREAK = ' '
TABLES
listasci = t_ascilist
listobject = t_listobject
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
WRITE:/ 'Below are the lines from the submitted program.'.
LOOP AT t_ascilist.
WRITE:/ t_ascilist-line.
ENDLOOP.
SKIP 2.
ENDIF.
ENDIF.
IMPORT t_mara FROM MEMORY ID 'T_MARA'.
WRITE:/
'Here is the output from the table exported from the submitted program.'
LOOP AT t_mara.
WRITE:/ t_mara-matnr.
ENDLOOP.
Submitted program
REPORT ZTESTAKS1.
DATA: v_matnr LIKE mara-matnr,
v_maktx LIKE makt-maktx.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_makt OCCURS 0,
matnr LIKE makt-matnr.
DATA: END OF t_makt.
SELECT-OPTIONS: s_matnr FOR v_matnr,
s_maktx FOR v_maktx.
START-OF-SELECTION.
SELECT matnr INTO TABLE t_makt
FROM makt
WHERE matnr IN s_matnr
AND maktx IN s_maktx.
if not t_makt[] is initial.
SELECT * FROM mara
INTO TABLE t_mara FOR ALL ENTRIES IN t_makt
WHERE matnr = t_makt-matnr.
endif.
EXPORT t_mara TO MEMORY ID 'T_MARA'.
WRITE:/ 'This list is from the submitted program'.
SKIP 1.
LOOP AT t_mara.
WRITE:/ t_mara-mtart.
ENDLOOP.
Hopes this helps you.
Thanks,
Ashok. -
First: I get the message telling me that "iTunes was unable to load data class information from Sync Services. Reconnect or try again later."
Second: In the Summary Tab under Backups, iTunes is telling me that my iPhone has never been backed up to my computer - which is not true. It's also telling me that my iPhone has never been backed up to iCloud. Again, not true. Although my backups are all missing from iTunes, I can see what I think is them in their folder: C:\Users\*your user name here*\AppData\Roaming\Apple Computer\MobileSync.
Third: iTunes is SLOOOOOOOOW. It takes nearly ten minutes - sometimes more - to launch, and when it does, it's constantly not responding. It seems every time I touch something it stops responding.
Fourth: I've been searching this "help" forum for a solution, and I've seen many other references, yet the only suggestion I've seen from someone from Apple is a reference to a solution that is over 2 years old - and DOESN'T WORK for anyone I can see who's tried it!
I've tried everything I could think of, and that others have suggested, including:
Uninstalling and re-installing iTunes
Ensuring I have the latest version of iTunes
Re-setting sync history
Renaming my Backup folder at the path above, and letting iTunes create a new one
Running around the house whilst pulling my hair and yelling obscenities
None helped. At all.
Hmmm... Been a devoted Apple/iOS guy for years, but maybe it's time to switch to Android?I've resolved the issue with iTunes constantly not responding. It's a bit embarrassing. I had a DVD in the drive that was corrupt, and once I was able to remove it - BAM - iTunes ran perfectly.
I'm still getting the Sync Services message, and my backups are still not showing in iTunes.
Getting there.... I hope!
Maybe you are looking for
-
Can't delete files from iTunes File Sharing
iPad, IOS 8.1.3 MacBook Pro Retina, OS 10.10.2 iTunes, v12.1 I'm trying to delete files from iTunes. In this instance, I have files I made in Pages, via my iPad, I have learned how to move them to my computer without using iCloud, which I prefer. Now
-
Socket based application - Performance Issues - Suggestions Needed
Hi All, We have an application which basically has been developed using core java. Here is a high level information about the application: a) It opens a serversocket which allows clients to connect to it. b) For every new client connection, a separat
-
Paraller Query Server Error while creating the database using DBCA on UNIX
Hi All, I am try to create the database on UNIX PLATFORM database 11g R1. At the end of database creation using DBCA i got the errors: ORA-12801:error signaled in parallel query server P077 ORA-00018: maximun number of sessions exceeded ORA-06512:at"
-
Accessing the sender file name in the response email
Hi, I have an asynchronous proxy scenario wherein I am calling an outbound proxy within an inbound proxy. Basically a file is sent from an external partner and response is sent back to them if there are any errors. Also email notification will be sen
-
Hi, Does anybody know how to generate a IDOC of message type CODCMT do you have some doc about it? Thanks alot Regards, Zheng Edited by: zhengliu on Jun 16, 2009 12:09 PM Edited by: zhengliu on Jun 16, 2009 12:10 PM