DAC loosing repository connection

I am having a couple of troubles while running an ETL. Maybe due to a DB installation, during the ETL I am loosing the connection with the repository (DB is down).
When it happens it seems that my ETL run is lost.
When I do startup the db again, DAC shows tasks running but my guess is that nothing is happening.
When this type of error happens should I do anything with DAC Server ? maybe a stop / start ? or DAC server "doesn't care" about the repository connection ?
So I wonder if there is any way of restarting my ETL job ?
Txs. for any help or suggestion.
Antonio

Txs for your comments.... That is what I am doing... On the other hand a Mark as Completed will re-execute the plan from the beginning.
I am trying to figure out if I can restart without having to go to the begin again... and also understand what should I do with DAC server when connection is lost.
DAC documentation says that connection to the server is lost (pg.11-19) in case of abnormal termination. Unfortunately the documentation does not mention what you should do when db is up again... Should the DAC server be stop /start ? or it does reconnect again ?
Antonio

Similar Messages

  • Could not retain the repository connections in portal admin console.

    Hi
    i have created additional WLP repository (stream based) in oracle.
    and configured as datasource in server console. and added respective JNDI name in portal admin console.
    and i could add/delete the content. But when ever i am restarting the machine i am loosing the added connection from portal admin console only.the connection configuration server console is safe.
    each time i have to configure it with same JNDI name add work with it in portal admin console only when ever i restart the machine.
    The content and datasources configuration is safe .
    but When ever i am creating additional WLP repository i could not see the respective details have updated in content-mgmt.xml in EAR meta-inf.
    is that because of that. if so why it is getting updated when it is adding new connection in admin console.

    When you create a Repository connection at run-time using the Portal Admin, the configuration is written to a Deployment Plan. By default, the Deployment Plan is written to a location which can be deleted during an application redeployment. You can specify a location for the deployment plan, which will not get deleted, via the WebLogic Server Console or you can add the information to the content-config.xml in <earProject>/meta-inf.
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/deployment.html#wp1045617
    Brad

  • DAC can't connect with INFORMATICA_DW_SERVER when dac server is running

    Hello all,
    We have something strange.
    We just installed BIA 7.9.5.1 with informatica 8.1.1 sp5 on windows server 2003.
    And confiugered it according to the manual.
    Now we want to setup the connection from the dac to the informatica services but we can't establish a connection when the DAC server is running. When we press on test connection it says 'please wait... ' but that is for almost an hour now or so.
    Now when we stop the dac server the connection to informatica_dw_server works just fine.
    Also the connection with the informatica_rep_server works, also when the dac server is started.
    What have we done so far:
    - We can run pmcmd and pmrep from the command line
    - We added the /server/bin and /client/bin directory to the path
    - We added the system variable infa_domains_file
    - We checked the config.bat file from the dac server
    - We checked the port in the adminconsole (which is 4001)
    - We restarted everything (all the services and the windows server as well)
    - when we try netstat we see it is listening on port 4001
    Proto Local Address Foreign Address State
    TCP rst-act3ct2:4001 rst-act3ct2:0 LISTENING --> is this correct?
    Hope anyone can help me out!!!!
    Best regards,
    Remc0 & Erik

    user7316776 wrote:>
    Now we want to setup the connection from the dac to the informatica services but we can't establish a connection when the DAC server is running. When we press on test connection it says 'please wait... ' but that is for almost an hour now or so.
    Now when we stop the dac server the connection to informatica_dw_server works just fine.
    Also the connection with the informatica_rep_server works, also when the dac server is started.
    What have we done so far:
    - We can run pmcmd and pmrep from the command line
    - We added the /server/bin and /client/bin directory to the path
    - We added the system variable infa_domains_file
    - We checked the config.bat file from the dac server
    - We checked the port in the adminconsole (which is 4001)
    - We restarted everything (all the services and the windows server as well)
    - when we try netstat we see it is listening on port 4001>
    Hope anyone can help me out!!!!
    Best regards,
    Remc0 & Erik>i have similar problem. When i test connection to Integration Service it says 'please wait... ' 10-15 minuts and then I am getting error:
    =====================================
    STD OUTPUT
    =====================================
    Informatica(r) PMCMD, version [8.1.1 SP5], build [135.0129], Windows 32-bit
    Copyright (c) Informatica Corporation 1994 - 2008
    All Rights Reserved.
    Invoked at Wed Mar 25 13:53:41 2009
    The command: [pingserver] is deprecated. Please use the command [pingservice] in the future.
    WARNING: Lost server connection.
    ERROR: Cannot connect to Integration Service [localhost:6001].
    Completed at Wed Mar 25 13:54:21 2009
    =====================================
    ERROR OUTPUT
    =====================================
    When i test connect to Repository all right
    Please!! Help me!!!!

  • Loosing modem connection WRT54GS v6

    I have recently purchased the WRT54GS ver6 and continuously loose the connection from the modem to the router.  I have one wired, one wireless and both will work fine for 1-2 hrs, then lose the connection from the modem.  I run the Easy Link advisor, it finds the router, the two pc's, but no modem.  I power down then power up the modem and click the "fix connection", it goes through the two pages then connection established.... every time.  It finds the router, the two pc's but always has to have the modem restarted.
    Frustrated,
    mark

    Thanks for the response, totally appreciate the help.  The version I have, the version they try to have me download now is 1.50.9.  Where do I get the version 1.01.0?  When was it released?  Version 1.50.9 was released just this October.
    thanks again
    mark

  • Mac Mini Late 2012 OS X 10.9.4 loosing network connectivity

    I haven't found the exact issue on the forums nor outside it so I'm creating a new thread.
    My Late 2012 Mini started loosing network connectivity after upgrading to 10.9.4, both WiFi and Ethernet.
    Sometimes it takes around 5 minutes, sometimes more than 30 but the connectivity gets disrupted continuously, the packets stop going in or out for around 30 seconds. I've done PRAM and SMC resets, I've changed network locations, nothing helps and I've found nothing interesting in the system logs.
    Also I can't login to the Apple bugtracker due to some error so I'm reporting it here.
    The only USB devices i have connected are keyboard and mouse.
    Any help will be appreciated.
    Mac Mini Late 2012 i5
    OS X 10.9.4 Mavericks

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Runtime repository connects on remote system fails in connection

    Hi,
    I've created runtime repository and access users and target schema on linux server through owb server install. Sqlplus onnections from my window2k PC work OK for all 3 users.
    I created a second runtime repository connection from my owb designer on windows2k system. When I bring up deployment manager and try to connect to the remote target through this connection, it fails with RTC-5260:failed to connect to runtime platform...,and ORA_01017:invalid username/password. Also, I notices a java thread on the remote linux server was created each time I tried the connection .
    I have the connection alias under both OWB and OracleDB tnsnames. What's the problem?
    ~Tracy

    Found one solution from metalink for this. Note:257687.1

  • My i phone 4  keeps loosing its connection with my Toyota Camry bluetooth-- anyone have any ideas why?

    My i phone 4  keeps loosing its connection with my Toyota Camry bluethoth   does anyone know what I can do about that?

    Ignore the ridiculous post by W1$C.  He posts that regardless of the person's question.
    Things you can do to solve your problem:
    1.  General>Settings>Reset Network settings
    2.  If this is only happening at home, power down your router for a minute, then power it back up.
    3.  Other basic troubleshooting steps outlined in the user guide are to restart, reset, and restore--first from backup, then if needed as a new device.
    Hope this helps.
    GDG

  • Unable to Create a Content Repository Connection using 'socketssl'

    I'm trying to create a Content Repository Connection with RIDC Socket Type as "socketssl".
    I am not able to create the connection. The following are the parameters mentioned in Jdeveloper
    RIDC Socket Type : socketssl
    Server Host Name : <ip of the content server>
    Content Server Listener Port : 54444 (incoming SSL provider is configured in the content server)
    KeyStore File Location : patch of the client keystore
    KeyStore Password : password
    Private Key Alias : PrivateKey Alias Name
    Private Key password : password
    I get the below error. However I am able to use RIDC to connect to UCM using socketssl. This problem is seen only with jdeveloper.
    SEVERE: Submission[id=1, service=oracle.webcenter.content.jcr.login, resource=ucm] caught exception running task
    javax.jcr.RepositoryException: oracle.stellent.ridc.protocol.ProtocolException: java.net.SocketException: Software caused connection abort: recv failed
         at oracle.jcr.impl.ExceptionFactory.repository(ExceptionFactory.java:161)
         at oracle.stellent.jcr.IdcPersistenceManagerFactory.createPersistenceManager(IdcPersistenceManagerFactory.java:185)
         at oracle.jcr.impl.OracleRepositoryImpl.login(OracleRepositoryImpl.java:444)
         at oracle.vcr.jam.LoginTask.call(LoginTask.java:68)
         at oracle.vcr.jam.LoginTask.call(LoginTask.java:29)
         at oracle.webcenter.concurrent.Submission$2.run(Submission.java:484)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:498)
         at oracle.webcenter.concurrent.Submission.run(Submission.java:424)
         at oracle.webcenter.concurrent.Submission$SubmissionFutureTask.run(Submission.java:888)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolExecutor.java:657)
         at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecutor.java:682)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.net.SocketException: Software caused connection abort: recv failed
         at oracle.stellent.ridc.protocol.intradoc.HdaProtocol.readResponse(HdaProtocol.java:254)
         at oracle.stellent.ridc.IdcClient.sendRequest(IdcClient.java:165)
         at oracle.stellent.jcr.IdcPersistenceManagerFactory.createPersistenceManager(IdcPersistenceManagerFactory.java:171)
         ... 15 more
    Caused by: java.net.SocketException: Software caused connection abort: recv failed
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at com.sun.net.ssl.internal.ssl.InputRecord.readFully(InputRecord.java:293)
         at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:331)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:798)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.waitForClose(SSLSocketImpl.java:1523)
         at com.sun.net.ssl.internal.ssl.HandshakeOutStream.flush(HandshakeOutStream.java:103)
         at com.sun.net.ssl.internal.ssl.Handshaker.sendChangeCipherSpec(Handshaker.java:689)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.sendChangeCipherAndFinish(ClientHandshaker.java:985)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverHelloDone(ClientHandshaker.java:904)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:238)
         at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:593)
         at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:529)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:893)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(SSLSocketImpl.java:753)
         at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:75)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
         at oracle.stellent.ridc.common.util.StreamUtil.readRawLine(StreamUtil.java:227)
         at oracle.stellent.ridc.common.util.StreamUtil.readLine(StreamUtil.java:254)
         at oracle.stellent.ridc.protocol.intradoc.HdaProtocol.readHeaders(HdaProtocol.java:453)
         at oracle.stellent.ridc.protocol.intradoc.HdaProtocol.readResponse(HdaProtocol.java:215)
         ... 17 more
    31/10/2011 2:14:29 PM oracle.webcenter.content.internal.dt.connection.wizard.AdapterConfigPanel validateConfig
    WARNING: Invalid Configuration Parameters
    javax.jcr.RepositoryException: oracle.stellent.ridc.protocol.ProtocolException: java.net.SocketException: Software caused connection abort: recv failed
         at oracle.jcr.impl.ExceptionFactory.repository(ExceptionFactory.java:161)
         at oracle.stellent.jcr.IdcPersistenceManagerFactory.createPersistenceManager(IdcPersistenceManagerFactory.java:185)
         at oracle.jcr.impl.OracleRepositoryImpl.login(OracleRepositoryImpl.java:444)
         at oracle.vcr.jam.LoginTask.call(LoginTask.java:68)
         at oracle.vcr.jam.LoginTask.call(LoginTask.java:29)
         at oracle.webcenter.concurrent.Submission$2.run(Submission.java:484)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:498)
         at oracle.webcenter.concurrent.Submission.run(Submission.java:424)
         at oracle.webcenter.concurrent.Submission$SubmissionFutureTask.run(Submission.java:888)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolExecutor.java:657)
         at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecutor.java:682)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.net.SocketException: Software caused connection abort: recv failed
         at oracle.stellent.ridc.protocol.intradoc.HdaProtocol.readResponse(HdaProtocol.java:254)
         at oracle.stellent.ridc.IdcClient.sendRequest(IdcClient.java:165)
         at oracle.stellent.jcr.IdcPersistenceManagerFactory.createPersistenceManager(IdcPersistenceManagerFactory.java:171)
         ... 15 more
    Caused by: java.net.SocketException: Software caused connection abort: recv failed
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at com.sun.net.ssl.internal.ssl.InputRecord.readFully(InputRecord.java:293)
         at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:331)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:798)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.waitForClose(SSLSocketImpl.java:1523)
         at com.sun.net.ssl.internal.ssl.HandshakeOutStream.flush(HandshakeOutStream.java:103)
         at com.sun.net.ssl.internal.ssl.Handshaker.sendChangeCipherSpec(Handshaker.java:689)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.sendChangeCipherAndFinish(ClientHandshaker.java:985)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverHelloDone(ClientHandshaker.java:904)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:238)
         at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:593)
         at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:529)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:893)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(SSLSocketImpl.java:753)
         at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:75)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
         at oracle.stellent.ridc.common.util.StreamUtil.readRawLine(StreamUtil.java:227)
         at oracle.stellent.ridc.common.util.StreamUtil.readLine(StreamUtil.java:254)
         at oracle.stellent.ridc.protocol.intradoc.HdaProtocol.readHeaders(HdaProtocol.java:453)
         at oracle.stellent.ridc.protocol.intradoc.HdaProtocol.readResponse(HdaProtocol.java:215)
         ... 17 more
    Please let me know the valid Configuration Parameters?
    Thanks,
    Manjunath
    Edited by: 890922 on Oct 30, 2011 8:25 PM

    You need to supply the "Key Store Location", "Key Store Password", "Private Key Alias" and "Private Key Password' to use socketssl.
    Also please make sure that the content server has enabled "Use SSL". You can configure it using the enterprise manager.

  • Keep loosing the connection to my 30" display

    Hi
    I've just bought a MacBook Pro 17" + and adapter to my 30" Apple Cinema Display.
    There seems to be an annoying issue however; 3-4 times during a work day I loose the connection to the 30" display. This happens without any prior notice. I don't mess with the cables or anything. Everything is plugged in nicely and securely, and the weirdest thing is that even thought the connection is lost to the screen itself my mouse and keyboard (which are connection through the screen) still works.
    I need to unplug the adapter to the mini display port 1-3 times before the connection is reestablished.
    3-5 times during the day what also happens is that the screen "blinks" for about 1-2 seconds (goes dark) and then goes on again ... causing me to hold my breath hoping the connection is not lost again
    Is this a knows issue? And what to do?
    Regards,
    Daniel

    Can I "change the channel"?
    Of course. You would change the channel on the wireless router creating the wireless network. The AX will automatically detect the channel that the wireless network is using.

  • HT4628 iMac looses wifi connection

    My iMac (OS 10.8.5) looses wifi connection every once in a while. I go to Network Diagnostics, press all those Continue buttons, at some point it sais "Your Internet connection appears to be working correctly" and the Internet connection is being restored right at this moment. It can happen 2 or 3 times a day or may not happen for weeks. I have seen this with three different routers, moreover, I had this problem in a different place with a different iMac (OS 10.6 again with different routers). Its annoing. May be there is some simple thing I just don't know? Thank you.

    Perfect it has been working fine ever since you posted the update 3 months ago.  UNTIL to day i am having the same problem my imac randomly disconnected from the internet while i was watching youtube.  when i went to the wifi icon in the top bar it searched and nothing! logging in/out doesnt help the only fix is to restart any advice?

  • Macbook 2009 intermittently looses wireless connection, Macbook 2009 intermittently looses wireless connection

    When I'm on the internet using the airport, I loose my connection all the time. The I don't loose the internet, it just like freezes and eventually it will come back and the action I have tried to get it to do, like go to another page or link etc. it will have done. I can still use the computer itself just not the internet. Crazy huh?
    I have checked in troubleshooting and gone through the manual. I'm not finding an answer. I've checked with my Internet Service Provider, it's not them. Everyone else in my household is staying connected just fine. Is my airport card just going out and I'm out of luck until I replace it? I'm hoping maybe there is an upgrade or something that might help. If you have a suggestion please let me know.
    Thanks

    Solution may be found if you search in the "More Like This" section over in the right column.

  • IMac looses airport connection intermittantly

    Can anyone help me. I have a G4 powerbook (OSX 10.2.8) which runs fine with my Aiport Extreme (firmware 5.1.1). I've just purchased a new iMac (OSX 10.5.6) which connects to the Airport on startup but then looses the connection and restablishes it many time in the day, without any seeming pattern.
    Help !

    If there is a 2.4 GHz cordless phone in your house your airport will have problems. Even if the phone isn't in use, if it's powered on it is communicating with the base and is interfering with the Airport

  • Imac keeps loosing WIFI connection

    Hi all,
    I loose wifi connection most of the time (but not all the time) at around 18:00 pm !?!, very strange !
    I have no neighbors and no houses close enough to interfere with my wifi.
    After loosing connection I do: Syst. Pref - Network - unblock modification with password - Help me - Diagnosis then choose my wifi
    and it starts working again for 3 minutes.
    Then I loose connection again and have to go through all the previous steps.  After 4 or 5 times it's all ok.
    What gives ? Can anyone help me please ? Any suggestions ?
    I have to use wifi because my ethernet port and firewire ports both stopped working and Apple says I have to take the machine for repair.
    Thanks for any help.
    OSX 10.9.4

    Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 2
    Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
    Step 4
    Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
    Step 5
    Reset the System Management Controller.
    Step 6
    Reset the PRAM.
    Step 7
    Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    Step 8
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

  • [SOLVED] Loosing Wireless Connection

    I am constantly loosing my wireless connection while I am trying to download something, usually I don't reach 60 MB and it's gone.
    I am also loosing my connection while browsing the internet for 2-3 hours.
    In both cases it reconnects after 2 minutes ,sometimes more.
    I still have my IP address during these 2 minutes.
    I tried different connection methods : wifi-menu, netctl, NetworkManager , manually with wpa_supplicant and dhcpcd(or dhclient) but they all lead to loosing my connection after a time.
    iwconfig
    enp11s0 no wireless extensions.
    wlp2s0 IEEE 802.11abgn ESSID:"FRITZ!Box Gastzugang"
    Mode:Managed Frequency:2.412 GHz Access Point: AccesPointX
    Bit Rate=52 Mb/s Tx-Power=19 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Power Management:off
    Link Quality=40/70 Signal level=-70 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:1698 Invalid misc:454 Missed beacon:0
    lo no wireless extensions.
    ip addr show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    2: enp11s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
    3: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
    inet 192.168.179.32/24 brd 192.168.179.255 scope global wlp2s0
    valid_lft forever preferred_lft forever
    sudo journalctl -u NetworkManager.service
    -- Reboot --
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> NetworkManager (version 0.9.8.8) is starting...
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> WEXT support is enabled
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
    Mar 15 18:05:09 Alik NetworkManager[161]: keyfile: parsing Auto FRITZ!Box Gastzugang ...
    Mar 15 18:05:09 Alik NetworkManager[161]: keyfile: read connection 'Auto FRITZ!Box Gastzugang'
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> monitoring kernel firmware directory '/lib/firmware'.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> rfkill2: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy0/rfkill2) (dri
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/platform/dell-laptop/rfkill/rfkill0) (platform driver dell-laptop)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiFi hardware radio set enabled
    Mar 15 18:05:09 Alik systemd[1]: Started Network Manager.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiFi enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WWAN enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiMAX enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> Networking is enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): using nl80211 for WiFi device control
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): driver supports Access Point (AP) mode
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 3)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): exported as /org/freedesktop/NetworkManager/Devices/0
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): bringing up device.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): preparing device.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): deactivating device (reason 'managed') [2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <warn> failed to allocate link cache: (-26) Protocol mismatch
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): carrier is OFF
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): new Ethernet device (driver: 'tg3' ifindex: 2)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): exported as /org/freedesktop/NetworkManager/Devices/1
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): bringing up device.
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> (enp11s0): preparing device.
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> (enp11s0): deactivating device (reason 'managed') [2]
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:1c.5/0000:0b:00.0/net/enp11s0
    Mar 15 18:05:10 Alik NetworkManager[161]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
    Mar 15 18:05:10 Alik NetworkManager[161]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
    Mar 15 18:05:11 Alik NetworkManager[161]: <warn> Couldn't acquire object manager proxy: Error calling StartServiceByName for org.bluez: GDBus.Error:org.freedesktop.systemd1.Loa
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> wpa_supplicant started
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0) supports 4 scan SSIDs
    Mar 15 18:05:11 Alik NetworkManager[161]: <warn> Trying to remove a non-existant call id.
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: starting -> ready
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: ready -> disconnected
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0) supports 4 scan SSIDs
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Auto-activating connection 'Auto FRITZ!Box Gastzugang'.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) starting connection 'Auto FRITZ!Box Gastzugang'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> (wlp2s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> NetworkManager state is now CONNECTING
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) scheduled...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) started...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) scheduled...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) complete.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) starting...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> (wlp2s0): device state change: prepare -> config (reason 'none') [40 50 0]
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0/wireless): connection 'Auto FRITZ!Box Gastzugang' has security, and secrets exist. No new secrets needed.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'ssid' value 'FRITZ!Box Gastzugang'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'scan_ssid' value '1'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'psk' value '<omitted>'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) complete.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Config: set interface ap_scan to 1
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: disconnected -> inactive
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: inactive -> associating
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associating -> associated
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'FRITZ!Box Gastzugang'.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) scheduled.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) started...
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> dhclient started with pid 321
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning IP6 addrconf.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) complete.
    Mar 15 18:05:15 Alik dhclient[321]: Internet Systems Consortium DHCP Client 4.3.0
    Mar 15 18:05:15 Alik dhclient[321]: Copyright 2004-2014 Internet Systems Consortium.
    Mar 15 18:05:15 Alik dhclient[321]: All rights reserved.
    Mar 15 18:05:15 Alik dhclient[321]: For info, please visit https://www.isc.org/software/dhcp/
    Mar 15 18:05:15 Alik dhclient[321]:
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): DHCPv4 state changed nbi -> preinit
    Mar 15 18:05:15 Alik dhclient[321]: Listening on LPF/wlp2s0/XX:XX:XX:XX:XX
    Mar 15 18:05:15 Alik dhclient[321]: Sending on LPF/wlp2s0/XX:XX:XX:XX:XX
    Mar 15 18:05:15 Alik dhclient[321]: Sending on Socket/fallback
    Mar 15 18:05:15 Alik dhclient[321]: DHCPDISCOVER on wlp2s0 to 255.255.255.255 port 67 interval 6
    Mar 15 18:05:16 Alik dhclient[321]: DHCPREQUEST on wlp2s0 to 255.255.255.255 port 67
    Mar 15 18:05:16 Alik dhclient[321]: DHCPOFFER from 192.168.179.1
    Mar 15 18:05:16 Alik dhclient[321]: DHCPACK from 192.168.179.1
    Mar 15 18:05:16 Alik dhclient[321]: bound to 192.168.179.32 -- renewal in 415231 seconds.
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> (wlp2s0): DHCPv4 state changed preinit -> bound
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> address 192.168.179.32
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> prefix 24 (255.255.255.0)
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> gateway 192.168.179.1
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> nameserver '192.168.179.1'
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> domain name 'fritz.box'
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) started...
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> (wlp2s0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) complete.
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> (wlp2s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> NetworkManager state is now CONNECTED_GLOBAL
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Policy set 'Auto FRITZ!Box Gastzugang' (wlp2s0) as default for IPv4 routing and DNS.
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Writing DNS information to /usr/bin/resolvconf
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) successful, device activated.
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) starting DHCPv6 as requested by IPv6 router...
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning DHCPv6 transaction (timeout in 45 seconds)
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> dhclient started with pid 380
    Mar 15 18:05:18 Alik dhclient[380]: Internet Systems Consortium DHCP Client 4.3.0
    Mar 15 18:05:18 Alik dhclient[380]: Copyright 2004-2014 Internet Systems Consortium.
    Mar 15 18:05:18 Alik dhclient[380]: All rights reserved.
    Mar 15 18:05:18 Alik dhclient[380]: For info, please visit https://www.isc.org/software/dhcp/
    Mar 15 18:05:18 Alik dhclient[380]:
    Mar 15 18:05:18 Alik dhclient[380]: Listening on Socket/wlp2s0
    Mar 15 18:05:18 Alik dhclient[380]: Sending on Socket/wlp2s0
    Mar 15 18:05:19 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 1060ms.
    Mar 15 18:05:20 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 2120ms.
    Mar 15 18:05:22 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 4380ms.
    Mar 15 18:05:26 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 9150ms.
    Mar 15 18:05:35 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 18730ms.
    Mar 15 18:05:54 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 36040ms.
    Mar 15 18:06:03 Alik NetworkManager[161]: <warn> (wlp2s0): DHCPv6 request timed out.
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> (wlp2s0): canceled DHCP transaction, DHCP client pid 380
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Mar 15 18:11:47 Alik NetworkManager[161]: <warn> Connection disconnected (reason 2)
    Mar 15 18:11:47 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: completed -> disconnected
    Mar 15 18:11:47 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: disconnected -> scanning
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: scanning -> authenticating
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: authenticating -> associating
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associating -> associated
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
    Not surprisingly , everything works fine on Windows.
    Thanks for the help
    Last edited by ollen (2014-03-16 00:25:44)

    first of all I stopped my NetworkManager.service and then :
    sudo wpa_supplicant -Dnl80211 -iwlp2s0 -c/etc/wpa_supplicant/wpa_supplicant.conf &
    Successfully initialized wpa_supplicant
    wlp2s0: CTRL-EVENT-SCAN-STARTED
    wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    wlp2s0: Associated with XX:XX:XX:XX:XX
    wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    and then I run
    dhclient wlp2s0
    but no output after this command but I get my IP address
    I also ran this command
    dhcpcd wlp2s0
    and the output is
    dhcpcd[2163]: version 6.3.1 starting
    dhcpcd[2163]: DUID XX:
    dhcpcd[2163]: wlp2s0: IAID XXX
    dhcpcd[2163]: wlp2s0: soliciting an IPv6 router
    dhcpcd[2163]: wlp2s0: rebinding lease of 192.168.179.32
    dhcpcd[2163]: wlp2s0: leased 192.168.179.32 for 864000 seconds
    dhcpcd[2163]: wlp2s0: adding route to 192.168.179.0/24
    dhcpcd[2163]: wlp2s0: adding default route via 192.168.179.1
    dhcpcd[2163]: forked to background, child pid 2558
    a little bit of
    journalctl -u wpa_supplicant.service
    -- Reboot --
    Mar 15 18:05:09 Alik systemd[1]: Starting WPA supplicant...
    Mar 15 18:05:11 Alik systemd[1]: Started WPA supplicant.
    Mar 15 19:53:19 Alik wpa_supplicant[289]: Successfully initialized wpa_supplicant
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=2
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: rfkill: WLAN hard blocked
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:53:19 Alik wpa_supplicant[289]: rfkill: WLAN hard blocked
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Authentication request to the driver failed
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: No network configuration found for the current AP
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: Could not verify EAPOL-Key MIC - dropping packet
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Authentication with XX:XX:XX:XX:XX timed out.
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="FRITZ!Box Gastzugang" auth_failures=1 duration=10
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="FRITZ!Box Gastzugang" auth_failures=2 duration=20
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: No network configuration found for the current AP
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Last edited by ollen (2014-03-16 00:17:44)

  • DCA-CONNECTION_LOOKUP_FAILED: Failure looking up the repository connection

    Using Jdev 10.1.3.2, we created a Data Control on Oracle Content DB 10.2 and used it to add content of a folder as table to a jspx page. The page run correctly from webcenter preconfigured OC4J. However, we encounter the following DCA error message when running the deployed page if we deployed it on AS 10.1.3.1.
    DCA-CONNECTION_LOOKUP_FAILED: Failure looking up the repository connection
    Also, we did add some JCR related libraries to our deploy profile to get through some of initial 'class not found' errors before we reach this error.
    What could be possbile problems?
    Also, we entered the hardcoded user name and password when created Data Control through S2S. Is there another way to create Data Control with settable user name and password? Or should we just use Content DB API through a portle directly?
    thanks

    We also have this problem but using the content repository data control against the filesystem. In JDeveloper 10.1.3.3 works, but when we deploy to Webcenter 10.1.3.2 we get this message: DCA-CONNECTION_LOOKUP_FAILED

Maybe you are looking for

  • Is there any way to find SHMMAX used by the system? sysdef is not useful.

    Since the SHMMAX is obsolete we could not set it. Also we are not able to find a way to current value that is used by system for SHMMAX(sysdef is not giving any value). Is there any other way to find out it's current value?

  • Excel containing pivot table - Problem when opening

    Hi, There is jsp that generates an excel with few pivot tables in it. In the open/save dialog, if I save the excel and open it, it displays fine but if it is opened up directly, it gives an error saying "Reference is invalid". Note: The range for the

  • Latest version of itunes (11.1.5)

    Hello, I can't download the latest version of itunes (11.1.5). Every time I download the updates, install it and restart, I find my itunes still with the old version (11.0.4). What can I do? I tried downloading both from the popup message and check f

  • AddChild / removeChild variables declaration (when is best?)

    I am putting together my file right now which is now using visual elements purely added and removed via AS3 (addChild / removeChild) methods. My question is just about the proper time / place to declare their variables. Can I declare them all at the

  • Carrega

    ganhei um i pad e ele nao ta carregando mostra q carrega mais nao sai do 1º traço e nao liga o q eu faço