DAC Oracle (OCI8)
hi
In the DAC Physical database sources , i am trying to use "Oracle (OCI8)" but i got this error messasge "no ocijdbc10 in java.library.path"
when using oracle (thin) it is working without any problem
My DAC version 10.1.3.4.1 , Database client 11g
thx
Hi
My oracle client is 11g, what is the exact name of the jar file is it ocijdbc10 jar ?
thx
Similar Messages
-
Oracle (OCI8) driver not available!
I have installed DAC successfully. So I start my client and am trying to create a new connection.
I did the following:
1) Clicked Configure
2) by default, Create connection is selected, I clicked Next
3) Entered Name, selected Connection Type as Oracle(OCI8), entered TNS names as ORCL and created new authentication file.
4) Clicked Test Connection and it shows the error 'Can't connect to the database'. When I click Show details, I get the following:
MESSAGE:::Oracle (OCI8) driver not available!
EXCEPTION CLASS::: java.lang.IllegalArgumentException
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:512)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::oracle.jdbc.driver.OracleDriver
EXCEPTION CLASS::: java.lang.ClassNotFoundException
java.net.URLClassLoader$1.run(URLClassLoader.java:200)
java.security.AccessController.doPrivileged(Native Method)
java.net.URLClassLoader.findClass(URLClassLoader.java:188)
java.lang.ClassLoader.loadClass(ClassLoader.java:306)
sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
java.lang.ClassLoader.loadClass(ClassLoader.java:251)
java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
java.lang.Class.forName0(Native Method)
java.lang.Class.forName(Class.java:169)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:510)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
Can somebody help me resolve this issue?
Thanks in advance!!!Resolved. ojdbc14.jar was missing in \bifoundation\dac\lib.
Downloaded and copied the file to the location and rebooted my system. -
Problem in connectString = "jdbc:oracle:oci8@";
i get error in following lines.
=========================================
connectString = "jdbc:oracle:oci8@";
connection = DriverManager.getConnectionconnectString,"ORDMEDIADEMO",
"ORDMEDIADEMO");
===========================================
what should be there in connection string??? after @ , anything is to be specified??
I wrote my computer name(win2000server)...(p4.headquarter.local) .but it diden/t work.......plz help me.
thanksLook in the JDBC documentation.
What is your service name?
You can use a string like:
@(description=(address=(host=your_machine.your_domain.com)(protocol=tcp)(port=1521))(connect_data=(service_name=your_service.your_service_domain.com)))
Or you can use one of the definitions in your tnsnames.ora file @my_sid
Larry -
WebLogic - How to Use Oracle OCI8 from NT?
Hi there,
I have set up WebLogic on NT. I have also installed Oracle client on
NT.
I want to connect to my Oracle database using OCI8 only. Can you
please tell me what I need to do to get this working on NT as I could
not get this to work?
My connection string is
jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(PORT=1527)(HOST=testserver)))(CONNECT_DATA=(SID=dbsid)))
What do I need to do to get WebLogic to recognise the driver (in
detail)?
Thanks in advance.
BBHi bob!
You have to use weblogic jDriver to connect to database using java application. You can create connectionpool as well as
datasource in weblogic and then get connection using:
ds.getConnection();
To create connections, you should have set following in your environment.
Path=.;ORACLE_HOME\bin;WEBLOGIC_HOME\bin\oci817_8
where ORACLE_HOME is where you installed oracle client and
WEBLOGIC_HOME is where you installed weblogic
After setting environemt, you can verify if environment is set or not by following command:
java utils.dbping oracle userid password databasename
Thanks,
Mitesh
bob brown wrote:
Hi there,
I have set up WebLogic on NT. I have also installed Oracle client on
NT.
I want to connect to my Oracle database using OCI8 only. Can you
please tell me what I need to do to get this working on NT as I could
not get this to work?
My connection string is
jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(PORT=1527)(HOST=testserver)))(CONNECT_DATA=(SID=dbsid)))
What do I need to do to get WebLogic to recognise the driver (in
detail)?
Thanks in advance.
BB -
Error at ODI With Oracle:OCI8
Hi to all, I have a problem with conection of ODI with a Oracle Rac 11g, my Oracle Client is a 10.2, the ODI (10.0.3) is on a Linux Red Hat Ent. and the java is a Java(TM) SE Runtime Environment (build 1.6.0_10-b33)
So the Env, are Like this
# ODI
export ORACLE_BASE=/u01/oracle/product
export ORACLE_HOME=/u01/oracle/product/client/10.2
export ODI_JAVA_HOME=/u01/java/jdk/jdk/
export ODI_HOME=/u01/oracle/product/odi/10.1/oracledi
# Shared
export LD_LIBRARY_PATH=/lib:/usr/lib:/usr/X11R6/lib:/u01/java/jdk/jdk/lib:/u01/oracle/product/odi/10.1/oracledi/lib:u01/oracle/product/client/10.2/lib
export PATH=.:/u01/java/jdk/jdk/bin:.:/bin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/X11R6/bin:/u01/oracle/product/odi/10.1/oracledi/binu01/oracle/product/client/10.2/bin
export CLASSPATH=.:/u01/java/jdk/jdk/lib:/u01/java/jdk/jdk/jre/lib:/u01/oracle/product/odi/10.1/oracledi/drivers
The tnsnames.ora is oks, because I can connect with sqlplus.
but when in ODI I use
oracle.jdbc.driver.OracleDriver
jdbc:oracle:oci8:@ServiceName
return me this error
java.lang.UnsatisfiedLinkError: oracle.jdbc.driver.T2CConnection.t2cGetCharSet([CI[CI[CI[CII[SLoracle/jdbc/driver/GetCharSetError;)S
at oracle.jdbc.driver.T2CConnection.t2cGetCharSet(Native Method)
do not connect, somebody knows how can I connect? Thanks for your help.
Edited by: user10860691 on 06/10/2009 22:07Very likely (see Metalink Note 788777.1) this is because the version of the JDBC driver and the OCI libraries is different.
Use the JDBC driver of the same version as the installed Oracle client libraries.
Yours,
Laurenz Albe -
How to set the oracle oci8 driver?
hello all:
I've set up the oracle thin driver and it works. but when I change to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
at weblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regardsHello, Jenny I am glad you found your resolution. I too am having problems isung
the oracle 0CI8 driver. My connection pool is creating fine, but my server is
crashing with JVM errors.
Here are my configurations.
DBase=Oracle 8.1.7,OS=Win2000, running 6.1 with Portal 4.0
pool config =
<JDBCConnectionPool CapacityIncrement="0"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="5"
MaxCapacity="5" Name="ccConPool"
Properties="jdbc.url=jdbc:oracle:oci8:@servername:1521:orcl;user=XXXXX;password=XXXXXX;dll=ocijdbc8;server=orcl;protocol=oci8;dll=ocijdbc8;protocol=oci8"
RefreshMinutes="0" Targets="portalServer"
TestTableName="WIP_TABLE" URL="jdbc:oracle:oci8:@servername"/>
My classpath sets my classes12.zip file first. My path sets %WEBLOGIC_HOME%\bin\oci817_8
and %WLCS_ORACLE_HOME%\bin.
Am I setting the right dll and protocol in my .dll? Where can I find documentation
on these properties definitions?
"jenny" <[email protected]> wrote:
hello all:
I've got the answer. those all because weblogic.jar. this jar include
the
class "oracle.jdbc.driver.OracleDriver".
although I put the classes12.zip into the CLASSPATH.but the weblogic.jar
in
front of classes12.zip.so classloader
load the class from weblogic.jar. so I can use thin driver(weblogic
implements this function with class,but not for oci8 )
..this is really a big pitfall !
put the classes12.zip in front of weblogic.jar .all perfect!
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
below is some chapters of my config.xml and startWeblogic.cmd
the oci8 :
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool" Password="{3DES}J3XuQd6cvvw="
Properties="user=yanji;password=yanji;dll=ocijdbc8;protocol=oci8"
Targets="myserver" TestTableName="test"
URL="jdbc:oracle:oci8:@pg01"/>
the thin :
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="citcpool" Password="{3DES}J3XuQd6cvvw="
Properties="user=yanji;password=yanji"
SupportsLocalTransaction="true" Targets="myserver"
URL="jdbc:oracle:thin:@sune250:1521:pg01"/>
:runWebLogic
echo on
set ORACLE_HOME=e:\oracle
set PATH=./bin;%ORACLE_HOME%\bin;%ORACLE_HOME%\lib;%PATH%
set
CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;.\lib\dom.jar;.\lib\xml
4j.jar;.\lib\jecf.jar;%ORACLE_HOME%\jdbc\lib\classes12.zip
echo off
the thin driver is ok,but the oci driver can not work!
if I've set the wrong CLASSPATH or PATH , the thin driver and oci8driver
must have not worked. I confused!
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
Its not CLASS_PATH it should be CLASSPATH.
when you say oracle\bin and oracle\lib , on what driver is the oracle
folder?I meant to say 'on what drive' not 'on what driver'
you have to specify the full path.
post your startup script here.
sree
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
I've set the ORACLE_HOME,and CLASS_PATH,but nothing changed. I will
go
to
crazy!!!
when startup the weblogic,I've seen the oracle\bin and oracle\libin th
"path" and classes12.zip in the CLASS_PATH.but the errors stillappears!!
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
1. Dont copy this file oci8jdbc.dll, to bin folder. Make sure
you
place
<oracle_home>\lib in your PATH before starting the server. Make
sure
your
ORACLE_HOME environment varable is set to <oracle_home> folder.
eg. set ORACLE_HOME=c:\ora816 before starting the server.
so you must have done something like
set ORACLE_HOME=c:\ora816
set PATH=%ORACLE_HOME%\bin;%ORACLE_HOME%\lib;%PATH%
2. double check if you set your CLASSPATH something like this,
CLASSPATH=%ORACLE_HOME%\jdbc\lib\classes12.zip;%CLASSPATH%
in the server startup script just before starting the server.
3. start the server the connection pool should work.
hth
sree
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello All:
I've edited the StartWeblogic.cmd, set the classes.zip into CLASSPATH,and
copied the oci8jdbc.dll to the bea\wlserver6.1\bin. errors stillappears!
my weblogic version is 6.1 and oracle is 8.1.6 .
why the thin driver is ok but the oci driver can not work?
I logined in the oracle website and look for the jdbc.but I find
that
jdbc
all provide for jdk1.2 or jdk1.1. because the weblogic6.1 based
jdk1.3.
I
think i can not use those drivers.
I think my oracle driver is ok,because i installed the jboss and
bas4.5
in
my computer. they all can use oci8 driver properly.and they all
based
jdk1.3.
by the way. I 've tryed added the oracle\bin path inStartWeblogic.cmd,
nothing changed !
again below is my config : I want to know whether my config right?
(the property DLL and Protocal auto added by the weblogic)
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji;dll=ocijdbc8;protocol=oci8"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
best regards
----- Original Message -----
From: "Mitesh Patel" <[email protected]>
Newsgroups: weblogic.developer.interest.jdbc
Sent: Thursday, December 13, 2001 4:00 AM
Subject: Re: how to set the oracle oci8 driver?
To use oracle oci8 driver:
You should have classes12.zip in weblogic classpath.
You should have ocijdbc8.dll in your weblogic path..
You can download ocijdbc8.dll from oracle website.
Mitesh Patel
jenny wrote:
hello all:
I've set up the oracle thin driver and it works. but when I
change
to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
atweblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
I've set up the oracle thin driver and it works. but when I change
to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
atweblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards -
DAC & Oracle Financials listed MetaLink? - Need to open a SR
Sorry to ask this question here in this forum but i am unable to find a way to open a SR dealing with DAC & Oracle financials. I cannot find anything that is coming close to identifying the product names (Data Warehouse Admin Console).
What do you select to identify this ticket needs to be handled by DAC expert?
Thanks in advance.Try a Product entry of "Business Intelligence Applications Consumer"
-
Trouble adding regular oracle oci8 support to RPM, CentOs 5
Hello,
It seems that i'm missing smth simple while trying to add oci8 support to RPM.
I took Christopher Jones's SRPM for 5.2.3 as a base, but since i don't have and don't need a support for instant client i modified latest available 5.1.6 SRPM from CentOS 5 repo.
The compile env is :
HOSTNAME=server.home
SHELL=/bin/bash
TERM=vt100
HISTSIZE=1000
OLDPWD=/root
USER=root
LD_LIBRARY_PATH=/u01/app/oracle/product/10.2.0/db_1/lib
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
TNS_ADMIN=/u01/app/oracle/product/10.2.0/db_1/network/admin
MAIL=/var/spool/mail/root
PATH=/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
INPUTRC=/etc/inputrc
PWD=/usr/src/redhat/SPECS
LANG=en_US.UTF-8
SHLVL=1
HOME=/root
LOGNAME=root
LESSOPEN=|/usr/bin/lesspipe.sh %s
ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
G_BROKEN_FILENAMES=1
_=/bin/envi compile as a root. Here is my spec file.
%define contentdir /var/www
%define apiver 20041225
%define zendver 20050922
%define pdover 20060409
# AZ
# Version of Instant Client RPM. [email protected] May 2007
%define ociver 10.2.0.3
# For testing OCI8 and PDO_OCI. Use the password of the SYSTEM schema
# and the connection string for the target
# database. [email protected] May 2007
%define oci8_test_system_password tiger
%define oci8_test_connection_string localhost/lhome
# Set oci8_test_local_db to TRUE when the Oracle DB is on the machine
# building the RPMS. Otherwise set it to FALSE.
# [email protected] May 2007
%define oci8_test_local_db TRUE
#AZ
Summary: The PHP HTML-embedded scripting language. (PHP: Hypertext Preprocessor)
Name: php
Version: 5.1.6
Release: 15%{?dist}
License: The PHP License v3.01
Group: Development/Languages
URL: http://www.php.net/
Source0: http://www.php.net/distributions/php-%{version}.tar.gz
Source50: php.conf
Source51: php.ini
Patch1: php-5.1.4-gnusrc.patch
Patch2: php-5.1.4-warnings.patch
Patch5: php-4.3.3-install.patch
Patch6: php-5.0.4-norpath.patch
Patch7: php-4.3.2-libtool15.patch
Patch13: php-5.0.2-phpize64.patch
Patch14: php-5.1.6-ecalloc.patch
# Fixes for extension modules
Patch21: php-4.3.1-odbc.patch
Patch22: php-4.3.11-shutdown.patch
# Functional changes
Patch30: php-5.0.4-dlopen.patch
Patch31: php-5.0.0-easter.patch
# Fixes for tests
Patch50: php-5.0.4-tests-dashn.patch
Patch51: php-5.0.4-tests-wddx.patch
# Security fixes
Patch70: php-4.3.9-CVE-2006-5465.patch
Patch71: php-5.1.6-CVE-2007-0906-imap.patch
Patch72: php-4.3.9-CVE-2007-0906-strreplace.patch
Patch73: php-4.3.9-CVE-2007-0907.patch
Patch74: php-4.3.9-CVE-2007-0908.patch
Patch75: php-4.3.9-CVE-2007-0909-odbc.patch
Patch76: php-4.3.9-CVE-2007-0909-printf.patch
Patch77: php-5.1.6-CVE-2007-0910.patch
Patch78: php-4.3.9-CVE-2007-0988.patch
Patch79: php-5.1.6-CVE-2007-1285.patch
Patch80: php-5.1.6-CVE-2007-1583.patch
Patch81: php-5.1.6-CVE-2007-0455.patch
Patch82: php-5.1.6-CVE-2007-1001.patch
Patch83: php-5.1.6-CVE-2007-1718.patch
Patch84: php-5.1.6-CVE-2007-1864.patch
Patch85: php-5.1.6-soapredir.patch
Patch86: php-5.1.6-ftpcrlf.patch
Patch87: php-5.1.6-CVE-2007-2872.patch
Patch88: php-5.1.6-CVE-2007-4658.patch
Patch89: php-5.1.6-CVE-2007-2756.patch
Patch90: php-5.1.6-CVE-2007-3799.patch
Patch91: php-5.1.6-CVE-2007-3996.patch
Patch92: php-5.1.6-CVE-2007-4670.patch
Patch93: php-5.1.6-CVE-2007-3998.patch
BuildRoot: %{_tmppath}/%{name}-root
BuildRequires: bzip2-devel, curl-devel >= 7.9, db4-devel, expat-devel
BuildRequires: gmp-devel, aspell-devel >= 0.50.0
BuildRequires: httpd-devel >= 2.0.46-1, libjpeg-devel, libpng-devel, pam-devel
BuildRequires: libstdc++-devel, openssl-devel, sqlite-devel >= 3.0.0
BuildRequires: zlib-devel, pcre-devel >= 4.5, smtpdaemon
BuildRequires: bzip2, fileutils, file >= 4.0, perl, libtool >= 1.4.3, gcc-c++
Obsoletes: php-dbg, php3, phpfi, stronghold-php
# Enforce Apache module ABI compatibility
Requires: httpd-mmn = %(cat %{_includedir}/httpd/.mmn || echo missing-httpd-devel)
Requires: file >= 4.0
Provides: mod_php = %{version}-%{release}
Requires: php-common = %{version}-%{release}
# For backwards-compatibility, require php-cli for the time being:
Requires: php-cli = %{version}-%{release}
%description
PHP is an HTML-embedded scripting language. PHP attempts to make it
easy for developers to write dynamically generated webpages. PHP also
offers built-in database integration for several commercial and
non-commercial database management systems, so writing a
database-enabled webpage with PHP is fairly simple. The most common
use of PHP coding is probably as a replacement for CGI scripts.
The php package contains the module which adds support for the PHP
language to Apache HTTP Server.
%package cli
Group: Development/Languages
Summary: Command-line interface for PHP
Requires: php-common = %{version}-%{release}
Provides: php-cgi = %{version}-%{release}
Provides: php-pcntl
%description cli
The php-cli package contains the command-line interface
executing PHP scripts, /usr/bin/php, and the CGI interface.
%package common
Group: Development/Languages
Summary: Common files for PHP
Provides: php-api = %{apiver}, php-zend-abi = %{zendver}
# Provides for all builtin modules:
Provides: php-bz2, php-calendar, php-ctype, php-curl, php-date, php-exif
Provides: php-ftp, php-gettext, php-gmp, php-hash, php-iconv, php-libxml
Provides: php-mime_magic, php-openssl, php-pcre, php-posix, php-pspell
Provides: php-reflection, php-session, php-shmop, php-simplexml, php-sockets
Provides: php-spl, php-sysvsem, php-sysvshm, php-sysvmsg, php-tokenizer
Provides: php-wddx, php-zlib
#AZ
Provides: php-oci
#AZ
Obsoletes: php-openssl
%description common
The php-common package contains files used by both the php
package and the php-cli package.
%package devel
Group: Development/Libraries
Summary: Files needed for building PHP extensions.
Requires: php = %{version}-%{release}, autoconf, automake
Obsoletes: php-pecl-pdo-devel
%description devel
The php-devel package contains the files needed for building PHP
extensions. If you need to compile your own PHP extensions, you will
need to install this package.
%package imap
Summary: A module for PHP applications that use IMAP.
Group: Development/Languages
Requires: php-common = %{version}-%{release}
Obsoletes: mod_php3-imap, stronghold-php-imap
BuildRequires: krb5-devel, openssl-devel, libc-client-devel
%description imap
The php-imap package contains a dynamic shared object (DSO) for the
Apache Web server. When compiled into Apache, the php-imap module will
add IMAP (Internet Message Access Protocol) support to PHP. IMAP is a
protocol for retrieving and uploading e-mail messages on mail
servers. PHP is an HTML-embedded scripting language. If you need IMAP
support for PHP applications, you will need to install this package
and the php package.
%package ldap
Summary: A module for PHP applications that use LDAP.
Group: Development/Languages
Requires: php-common = %{version}-%{release}
Obsoletes: mod_php3-ldap, stronghold-php-ldap
BuildRequires: cyrus-sasl-devel, openldap-devel, openssl-devel
%description ldap
The php-ldap package is a dynamic shared object (DSO) for the Apache
Web server that adds Lightweight Directory Access Protocol (LDAP)
support to PHP. LDAP is a set of protocols for accessing directory
services over the Internet. PHP is an HTML-embedded scripting
language. If you need LDAP support for PHP applications, you will
need to install this package in addition to the php package.
%package pdo
Summary: A database access abstraction module for PHP applications
Group: Development/Languages
Requires: php-common = %{version}-%{release}
Obsoletes: php-pecl-pdo-sqlite, php-pecl-pdo
Provides: php-pdo-abi = %{pdover}
%description pdo
The php-pdo package contains a dynamic shared object that will add
a database access abstraction layer to PHP. This module provides
a common interface for accessing MySQL, PostgreSQL or other
databases.
%package mysql
Summary: A module for PHP applications that use MySQL databases.
Group: Development/Languages
Requires: php-common = %{version}-%{release}, php-pdo
Provides: php_database, php-mysqli
Obsoletes: mod_php3-mysql, stronghold-php-mysql
BuildRequires: mysql-devel >= 4.1.0
%description mysql
The php-mysql package contains a dynamic shared object that will add
MySQL database support to PHP. MySQL is an object-relational database
management system. PHP is an HTML-embeddable scripting language. If
you need MySQL support for PHP applications, you will need to install
this package and the php package.
%package pgsql
Summary: A PostgreSQL database module for PHP.
Group: Development/Languages
Requires: php-common = %{version}-%{release}, php-pdo
Provides: php_database
Obsoletes: mod_php3-pgsql, stronghold-php-pgsql
BuildRequires: krb5-devel, openssl-devel, postgresql-devel
%description pgsql
The php-pgsql package includes a dynamic shared object (DSO) that can
be compiled in to the Apache Web server to add PostgreSQL database
support to PHP. PostgreSQL is an object-relational database management
system that supports almost all SQL constructs. PHP is an
HTML-embedded scripting language. If you need back-end support for
PostgreSQL, you should install this package in addition to the main
php package.
#AZ
# Added oci8. [email protected] May 2007
%package oci8
Summary: A module for PHP applications using the Oracle database
Group: Development/Languages
Requires: php-common = %{version}-%{release}, php-pdo
#BuildRequires: oracle-instantclient-devel = %{ociver}
Provides: php_database, php-oci
AutoReqProv: No
%description oci8
The php-oci8 package contains a dynamic shared object (DSO) for the
Apache Web server. When compiled into Apache, the php-oci8 module will
add OCI8 support to PHP. OCI8 is an extension for Oracle Database
access. PHP is an HTML-embedded scripting language. If you need
Oracle support for PHP applications, you can install this package and
the php package.
This package also contains PDO_OCI for use with the PDO extension.
#AZ
%package odbc
Group: Development/Languages
Requires: php-common = %{version}-%{release}, php-pdo
Summary: A module for PHP applications that use ODBC databases.
Provides: php_database
Obsoletes: stronghold-php-odbc
BuildRequires: unixODBC-devel
%description odbc
The php-odbc package contains a dynamic shared object that will add
database support through ODBC to PHP. ODBC is an open specification
which provides a consistent API for developers to use for accessing
data sources (which are often, but not always, databases). PHP is an
HTML-embeddable scripting language. If you need ODBC support for PHP
applications, you will need to install this package and the php
package.
%package soap
Group: Development/Languages
Requires: php-common = %{version}-%{release}
Summary: A module for PHP applications that use the SOAP protocol
BuildRequires: libxml2-devel
%description soap
The php-soap package contains a dynamic shared object that will add
support to PHP for using the SOAP web services protocol.
%package snmp
Summary: A module for PHP applications that query SNMP-managed devices.
Group: Development/Languages
Requires: php-common = %{version}-%{release}, net-snmp
BuildRequires: net-snmp-devel
%description snmp
The php-snmp package contains a dynamic shared object that will add
support for querying SNMP devices to PHP. PHP is an HTML-embeddable
scripting language. If you need SNMP support for PHP applications, you
will need to install this package and the php package.
%package xml
Summary: A module for PHP applications which use XML
Group: Development/Languages
Requires: php-common = %{version}-%{release}
Obsoletes: php-domxml, php-dom
Provides: php-dom, php-xsl, php-domxml
BuildRequires: libxslt-devel >= 1.0.18-1, libxml2-devel >= 2.4.14-1
%description xml
The php-xml package contains dynamic shared objects which add support
to PHP for manipulating XML documents using the DOM tree,
and performing XSL transformations on XML documents.
%package xmlrpc
Summary: A module for PHP applications which use the XML-RPC protocol
Group: Development/Languages
Requires: php-common = %{version}-%{release}
BuildRequires: expat-devel
%description xmlrpc
The php-xmlrpc package contains a dynamic shared object that will add
support for the XML-RPC protocol to PHP.
%package mbstring
Summary: A module for PHP applications which need multi-byte string handling
Group: Development/Languages
Requires: php-common = %{version}-%{release}
%description mbstring
The php-mbstring package contains a dynamic shared object that will add
support for multi-byte string handling to PHP.
%package ncurses
Summary: A module for PHP applications for using ncurses interfaces
Group: Development/Languages
Requires: php-common = %{version}-%{release}
BuildRequires: ncurses-devel
%description ncurses
The php-ncurses package contains a dynamic shared object that will add
support for using the ncurses terminal output interfaces.
%package gd
Summary: A module for PHP applications for using the gd graphics library
Group: Development/Languages
Requires: php-common = %{version}-%{release}
BuildRequires: gd-devel, freetype-devel
%description gd
The php-gd package contains a dynamic shared object that will add
support for using the gd graphics library to PHP.
%package bcmath
Summary: A module for PHP applications for using the bcmath library
Group: Development/Languages
Requires: php-common = %{version}-%{release}
%description bcmath
The php-bcmath package contains a dynamic shared object that will add
support for using the bcmath library to PHP.
%package dba
Summary: A database abstraction layer module for PHP applications
Group: Development/Languages
Requires: php-common = %{version}-%{release}
%description dba
The php-dba package contains a dynamic shared object that will add
support for using the DBA database abstraction layer to PHP.
%prep
%setup -q
%patch1 -p1 -b .gnusrc
%patch2 -p1 -b .warnings
%patch5 -p1 -b .install
%patch6 -p1 -b .norpath
%patch7 -p1 -b .libtool15
%patch13 -p1 -b .phpize64
%patch14 -p1 -b .ecalloc
%patch21 -p1 -b .odbc
%patch22 -p1 -b .shutdown
%patch30 -p1 -b .dlopen
%patch31 -p1 -b .easter
%patch50 -p1 -b .tests-dashn
%patch51 -p1 -b .tests-wddx
%patch70 -p1 -b .cve5465
%patch71 -p1 -b .cve0906-imap
%patch72 -p1 -b .cve0906-strreplace
%patch73 -p1 -b .cve0907
%patch74 -p1 -b .cve0908
%patch75 -p1 -b .cve0909-odbc
%patch76 -p1 -b .cve0909-printf
%patch77 -p1 -b .cve0910
%patch78 -p1 -b .cve0988
%patch79 -p1 -b .cve1285
%patch80 -p1 -b .cve1583
%patch81 -p1 -b .cve0455
%patch82 -p1 -b .cve1001
%patch83 -p1 -b .cve1718
%patch84 -p1 -b .cve1864
%patch85 -p1 -b .soapredir
%patch86 -p1 -b .ftpcrlf
%patch87 -p1 -b .cve2872
%patch88 -p1 -b .cve4658
%patch89 -p1 -b .cve2756
%patch90 -p1 -b .cve3799
%patch91 -p1 -b .cve3996
%patch92 -p1 -b .cve4670
%patch93 -p1 -b .cve3998
# Prevent %%doc confusion over LICENSE files
cp Zend/LICENSE Zend/ZEND_LICENSE
cp TSRM/LICENSE TSRM_LICENSE
cp regex/COPYRIGHT regex_COPYRIGHT
cp ext/gd/libgd/README gd_README
# Source is built twice: once for /usr/bin/php, once for the Apache DSO.
mkdir build-cgi build-apache
# Remove bogus test; position of read position after fopen(, "a+")
# is not defined by C standard, so don't presume anything.
rm -f ext/standard/tests/file/bug21131.phpt
# Tests that fail.
rm -f ext/standard/tests/file/bug22414.phpt \
ext/iconv/tests/bug16069.phpt
#AZ
# Tests that fail.
rm -f ext/oci8/tests/bug27303.phpt \
ext/oci8/tests/bug27303_2.phpt \
ext/oci8/tests/bug27303_4.phpt
# OCI8 config file. [email protected] May 2007
cat <<EOF > ext/oci8/tests/details.inc
<?php
* Please, change user, password and dbase to match your configuration.
\$user = "scott";
\$password = "%{oci8_test_system_password}";
\$dbase = "%{oci8_test_connection_string}";
/* Set this variable to TRUE if Oracle is installed @ localhost */
\$oracle_on_localhost = %{oci8_test_local_db};
?>
EOF
#AZ
# Safety check for API version change.
vapi=`sed -n '/#define PHP_API_VERSION/{s/.* //;p}' main/php.h`
if test "x${vapi}" != "x%{apiver}"; then
: Error: Upstream API version is now ${vapi}, expecting %{apiver}.
: Update the apiver macro and rebuild.
exit 1
fi
# Safety check for Zend API version change.
vzend=`sed -n '/#define ZEND_MODULE_API_NO/{s/^[^0-9]*//;p;}' Zend/zend_modules.h`
if test "x${vzend}" != "x%{zendver}"; then
: Error: Upstream Zend module ABI version is now ${vzend}, expecting %{zendver}.
: Update the zendver macro and rebuild.
exit 1
fi
# Safety check for PDO ABI version change
vpdo=`sed -n '/#define PDO_DRIVER_API/{s/.*[ ]//;p}' ext/pdo/php_pdo_driver.h`
if test "x${vpdo}" != "x%{pdover}"; then
: Error: Upstream PDO ABI version is now ${vpdo}, expecting %{pdover}.
: Update the pdover macro and rebuild.
exit 1
fi
%build
# Force use of system libtool:
libtoolize force copy
cat `aclocal --print-ac-dir`/libtool.m4 > build/libtool.m4
# Regenerate configure scripts (patches change config.m4's)
./buildconf --force
CFLAGS="$RPM_OPT_FLAGS -fno-strict-aliasing -Wno-pointer-sign"
CPPFLAGS="-DLDAP_DEPRECATED=1"
export CFLAGS CPPFLAGS
# Install extension modules in %{_libdir}/php/modules.
EXTENSION_DIR=%{_libdir}/php/modules; export EXTENSION_DIR
# Set PEAR_INSTALLDIR to ensure that the hard-coded include_path
# includes the PEAR directory even though pear is packaged
# separately.
PEAR_INSTALLDIR=%{_datadir}/pear; export PEAR_INSTALLDIR
# Shell function to configure and build a PHP tree.
build() {
# bison-1.875-2 seems to produce a broken parser; workaround.
mkdir Zend && cp ../Zend/zend_{language,ini}_{parser,scanner}.[ch] Zend
ln -sf ../configure
%configure \
--cache-file=../config.cache \
--with-libdir=%{_lib} \
--with-config-file-path=%{_sysconfdir} \
--with-config-file-scan-dir=%{_sysconfdir}/php.d \
--disable-debug \
--with-pic \
--disable-rpath \
--without-pear \
--with-bz2 \
--with-curl \
--with-exec-dir=%{_bindir} \
--with-freetype-dir=%{_prefix} \
--with-png-dir=%{_prefix} \
--enable-gd-native-ttf \
--without-gdbm \
--with-gettext \
--with-gmp \
--with-iconv \
--with-jpeg-dir=%{_prefix} \
--with-openssl \
--with-png \
--with-pspell \
--with-expat-dir=%{_prefix} \
--with-pcre-regex=%{_prefix} \
--with-zlib \
--with-layout=GNU \
--enable-exif \
--enable-ftp \
--enable-magic-quotes \
--enable-sockets \
enable-sysvsem enable-sysvshm --enable-sysvmsg \
--enable-track-vars \
--enable-trans-sid \
--enable-yp \
--enable-wddx \
--with-kerberos \
--enable-ucd-snmp-hack \
--with-unixODBC=shared,%{_prefix} \
--enable-memory-limit \
--enable-shmop \
--enable-calendar \
--enable-dbx \
--enable-dio \
--with-mime-magic=%{_sysconfdir}/httpd/conf/magic \
--without-sqlite \
--with-libxml-dir=%{_prefix} \
--with-oci8=$ORACLE_HOME \
--with-apxs2=/usr/sbin/apxs \
--with-xml \
$*
if test $? != 0; then
tail -500 config.log
: configure failed
exit 1
fi
make %{?_smp_mflags}
# Build /usr/bin/php-cgi with the CGI SAPI, and all the shared extensions
pushd build-cgi
build --enable-force-cgi-redirect \
--enable-pcntl \
with-imap=shared with-imap-ssl \
enable-mbstring=shared enable-mbstr-enc-trans \
--enable-mbregex \
--with-ncurses=shared \
--with-gd=shared \
--enable-bcmath=shared \
enable-dba=shared with-db4=%{_prefix} \
--with-xmlrpc=shared \
--with-ldap=shared \
--with-mysql=shared,%{_prefix} \
--with-mysqli=shared,%{_bindir}/mysql_config \
--enable-dom=shared \
--with-dom-xslt=%{_prefix} --with-dom-exslt=%{_prefix} \
--with-pgsql=shared \
--with-snmp=shared,%{_prefix} \
--enable-soap=shared \
--with-xsl=shared,%{_prefix} \
enable-xmlreader=shared enable-xmlwriter=shared \
--enable-fastcgi \
--enable-pdo=shared \
--with-pdo-odbc=shared,unixODBC,%{_prefix} \
--with-pdo-mysql=shared,%{_prefix} \
--with-pdo-pgsql=shared,%{_prefix} \
--with-pdo-sqlite=shared,%{_prefix} \
# --with-pdo-oci=shared,$ORACLE_HOME \
--with-oci8 \
--enable-sigchild
popd
# Build Apache module, and the CLI SAPI, /usr/bin/php
pushd build-apache
build --with-apxs2=%{_sbindir}/apxs \
without-mysql without-gd \
without-odbc disable-dom \
disable-dba without-unixODBC \
disable-pdo disable-xmlreader --disable-xmlwriter
popd
%check
cd build-apache
# Run tests, using the CLI SAPI
export NO_INTERACTION=1 REPORT_EXIT_STATUS=1 MALLOC_CHECK_=2
unset TZ LANG LC_ALL
#AZ
# Allows PDO_OCI tests to connect. [email protected] May 2007
#export PDO_OCI_TEST_DSN=oci:dbname=%{oci8_test_connection_string}
#export PDO_OCI_TEST_USER=scott
#export PDO_OCI_TEST_PASS=%{oci8_test_system_password}
#AZ
if ! make test; then
set +x
for f in `find .. -name \*.diff -type f -print`; do
echo "TEST FAILURE: $f --"
cat "$f"
echo "-- $f result ends."
done
set -x
#exit 1
fi
unset NO_INTERACTION REPORT_EXIT_STATUS MALLOC_CHECK_
%install
[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
# Install everything from the CGI SAPI build
pushd build-cgi
make install INSTALL_ROOT=$RPM_BUILD_ROOT
mv $RPM_BUILD_ROOT%{_bindir}/php $RPM_BUILD_ROOT%{_bindir}/php-cgi
# Install the CLI SAPI as /usr/bin/php
make install-cli INSTALL_ROOT=$RPM_BUILD_ROOT
popd
# Install the Apache module
pushd build-apache
make install-sapi INSTALL_ROOT=$RPM_BUILD_ROOT
popd
# Install the default configuration file and icons
install -m 755 -d $RPM_BUILD_ROOT%{_sysconfdir}/
install -m 644 $RPM_SOURCE_DIR/php.ini $RPM_BUILD_ROOT%{_sysconfdir}/php.ini
install -m 755 -d $RPM_BUILD_ROOT%{contentdir}/icons
install -m 644 *.gif $RPM_BUILD_ROOT%{contentdir}/icons/
# For PEAR packaging:
install -m 755 -d $RPM_BUILD_ROOT%{_libdir}/php/pear
# Use correct libdir
sed -i -e 's|%{_prefix}/lib|%{_libdir}|' $RPM_BUILD_ROOT%{_sysconfdir}/php.ini
# install the DSO
install -m 755 -d $RPM_BUILD_ROOT%{_libdir}/httpd/modules
install -m 755 build-apache/libs/libphp5.so $RPM_BUILD_ROOT%{_libdir}/httpd/modules
# Apache config fragment
install -m 755 -d $RPM_BUILD_ROOT/etc/httpd/conf.d
install -m 644 $RPM_SOURCE_DIR/php.conf $RPM_BUILD_ROOT/etc/httpd/conf.d
install -m 755 -d $RPM_BUILD_ROOT%{_sysconfdir}/php.d
install -m 755 -d $RPM_BUILD_ROOT%{_localstatedir}/lib/php
install -m 700 -d $RPM_BUILD_ROOT%{_localstatedir}/lib/php/session
# Generate files lists and stub .ini files for each subpackage
#AZ
for mod in oci8 pgsql mysql mysqli odbc ldap snmp xmlrpc imap \
mbstring ncurses gd dom xsl soap bcmath dba xmlreader xmlwriter \
pdo pdo_mysql pdo_pgsql pdo_odbc pdo_sqlite; do
#AZ
cat > $RPM_BUILD_ROOT%{_sysconfdir}/php.d/${mod}.ini <<EOF
; Enable ${mod} extension module
extension=${mod}.so
EOF
cat > files.${mod} <<EOF
%attr(755,root,root) %{_libdir}/php/modules/${mod}.so
%config(noreplace) %attr(644,root,root) %{_sysconfdir}/php.d/${mod}.ini
EOF
done
# The dom, xsl and xml* modules are all packaged in php-xml
cat files.dom files.xsl files.xml{reader,writer} > files.xml
# The mysql and mysqli modules are both packaged in php-mysql
cat files.mysqli >> files.mysql
# Split out the PDO modules
#AZ
cat files.pdo_oci >> files.oci8
#AZ
cat files.pdo_mysql >> files.mysql
cat files.pdo_pgsql >> files.pgsql
cat files.pdo_odbc >> files.odbc
# Package pdo_sqlite with pdo; isolating the sqlite dependency
# isn't useful at this time since rpm itself requires sqlite.
cat files.pdo_sqlite >> files.pdo
# Remove unpackaged files
rm -rf $RPM_BUILD_ROOT%{_libdir}/php/modules/*.a \
$RPM_BUILD_ROOT%{_bindir}/{phptar} \
$RPM_BUILD_ROOT%{_datadir}/pear
# Remove irrelevant docs
rm -f README.{Zeus,QNX,CVS-RULES}
%clean
[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
rm files.*
%files
%defattr(-,root,root)
%{_libdir}/httpd/modules/libphp5.so
%attr(0770,root,apache) %dir %{_localstatedir}/lib/php/session
%config %{_sysconfdir}/httpd/conf.d/php.conf
%{contentdir}/icons/php.gif
%files common
%defattr(-,root,root)
%doc CODING_STANDARDS CREDITS EXTENSIONS INSTALL LICENSE NEWS README*
%doc Zend/ZEND_* gd_README TSRM_LICENSE regex_COPYRIGHT
%config %{_sysconfdir}/php.ini
%dir %{_sysconfdir}/php.d
%dir %{_libdir}/php
%dir %{_libdir}/php/modules
%dir %{_localstatedir}/lib/php
%dir %{_libdir}/php/pear
%files cli
%defattr(-,root,root)
%{_bindir}/php
%{_bindir}/php-cgi
%{_mandir}/man1/php.1*
%files devel
%defattr(-,root,root)
%{_bindir}/php-config
%{_bindir}/phpize
%{_includedir}/php
%{_libdir}/php/build
%{_mandir}/man1/php-config.1*
%{_mandir}/man1/phpize.1*
%files pgsql -f files.pgsql
%files mysql -f files.mysql
%files odbc -f files.odbc
%files imap -f files.imap
%files ldap -f files.ldap
%files snmp -f files.snmp
%files xml -f files.xml
%files xmlrpc -f files.xmlrpc
%files mbstring -f files.mbstring
%files ncurses -f files.ncurses
%files gd -f files.gd
%files soap -f files.soap
%files bcmath -f files.bcmath
%files dba -f files.dba
%files pdo -f files.pdo
#AZ
%files oci8 -f files.oci8
#AZ
%changelog
* Wed Sep 12 2007 Joe Orton <[email protected]> 5.1.6-15.el5
- improve fix for CVE-2007-3997 (#278411)
* Fri Sep 7 2007 Joe Orton <[email protected]> 5.1.6-14.el5
- fix backport for CVE-2007-3996 (#278411)
* Thu Sep 6 2007 Joe Orton <[email protected]> 5.1.6-13.el5
- add security fixes for CVE-2007-2756, CVE-2007-2872,
CVE-2007-3799, CVE-2007-3996, CVE-2007-3998, CVE-2007-4658,
CVE-2007-4670 (#278411)
* Wed Apr 4 2007 Joe Orton <[email protected]> 5.1.6-12.el5
- add security fix for CVE-2007-1864, SOAP redirect handling issue,
FTP CRLF injection issue (#235016)
* Wed Apr 4 2007 Joe Orton <[email protected]> 5.1.6-11.el5
- add security fix for CVE-2007-1718 (#235016)
* Tue Apr 3 2007 Joe Orton <[email protected]> 5.1.6-9.el5
- add security fix for CVE-2007-1583 (#235016)
- add security fixes for CVE-2007-0455, CVE-2007-1001 (#235036)
* Fri Mar 9 2007 Joe Orton <[email protected]> 5.1.6-7.el5
- add security fix for CVE-2007-1285 (#231597)
* Fri Feb 16 2007 Joe Orton <[email protected]> 5.1.6-6.el5
- add security fixes for: CVE-2007-0906, CVE-2007-0907,
CVE-2007-0908, CVE-2007-0909, CVE-2007-0910, CVE-2007-0988 (#229013)
* Tue Dec 19 2006 Joe Orton <[email protected]> 5.1.6-5.el5
- fix version for php-zend-abi (#218758)
* Thu Nov 23 2006 Joe Orton <[email protected]> 5.1.6-4.el5
- php-xml provides php-domxml (#215656)
- fix php-pdo-abi provide (#214281)
- provide php-zend-abi (#212804)
- don't Obsolete mod_php
- fix PDO sqlite TEXT extraction truncate-by-one (#217033)
- package php{ize,-config} man pages in -devel (#199382)
- change module subpackages to require php-common not php (#177821)
- add security fix for CVE-2006-5465 (#216114)
* Wed Oct 4 2006 Joe Orton <[email protected]> 5.1.6-3
- from upstream: add safety checks against integer overflow in _ecalloc
* Tue Aug 29 2006 Joe Orton <[email protected]> 5.1.6-2
- update to 5.1.6 (security fixes)
- bump default memory_limit to 16M (#196802)
* Wed Jul 12 2006 Jesse Keating <[email protected]> - 5.1.4-8.1
- rebuild
* Fri Jun 9 2006 Joe Orton <[email protected]> 5.1.4-8
- Provide php-posix (#194583)
- only provide php-pcntl from -cli subpackage
- add missing defattr's (thanks to Matthias Saou)
* Fri Jun 9 2006 Joe Orton <[email protected]> 5.1.4-7
- move Obsoletes for php-openssl to -common (#194501)
- Provide: php-cgi from -cli subpackage
* Fri Jun 2 2006 Joe Orton <[email protected]> 5.1.4-6
- split out php-cli, php-common subpackages (#177821)
- add php-pdo-abi version export (#193202)
* Wed May 24 2006 Radek Vokal <[email protected]> 5.1.4-5.1
- rebuilt for new libnetsnmp
* Thu May 18 2006 Joe Orton <[email protected]> 5.1.4-5
- provide mod_php (#187891)
- provide php-cli (#192196)
- use correct LDAP fix (#181518)
- define GNUSOURCE in php_config.h and leave it defined
- drop (circular) dependency on php-pear
* Mon May 8 2006 Joe Orton <[email protected]> 5.1.4-3
- update to 5.1.4
* Wed May 3 2006 Joe Orton <[email protected]> 5.1.3-3
- update to 5.1.3
* Tue Feb 28 2006 Joe Orton <[email protected]> 5.1.2-5
- provide php-api (#183227)
- add provides for all builtin modules (Tim Jackson, #173804)
- own %%{_libdir}/php/pear for PEAR packages (per #176733)
- add obsoletes to allow upgrade from FE4 PDO packages (#181863)
* Fri Feb 10 2006 Jesse Keating <[email protected]> - 5.1.2-4.3
- bump again for double-long bug on ppc(64)
* Tue Feb 07 2006 Jesse Keating <[email protected]> - 5.1.2-4.1
- rebuilt for new gcc4.1 snapshot and glibc changes
* Tue Jan 31 2006 Joe Orton <[email protected]> 5.1.2-4
- rebuild for new libc-client soname
* Mon Jan 16 2006 Joe Orton <[email protected]> 5.1.2-3
- only build xmlreader and xmlwriter shared (#177810)
* Fri Jan 13 2006 Joe Orton <[email protected]> 5.1.2-2
- update to 5.1.2
* Thu Jan 5 2006 Joe Orton <[email protected]> 5.1.1-8
- rebuild again
* Mon Jan 2 2006 Joe Orton <[email protected]> 5.1.1-7
- rebuild for new net-snmp
* Mon Dec 12 2005 Joe Orton <[email protected]> 5.1.1-6
- enable short_open_tag in default php.ini again (#175381)
* Fri Dec 09 2005 Jesse Keating <[email protected]>
- rebuilt
* Thu Dec 8 2005 Joe Orton <[email protected]> 5.1.1-5
- require net-snmp for php-snmp (#174800)
* Sun Dec 4 2005 Joe Orton <[email protected]> 5.1.1-4
- add /usr/share/pear back to hard-coded include_path (#174885)
* Fri Dec 2 2005 Joe Orton <[email protected]> 5.1.1-3
- rebuild for httpd 2.2
* Mon Nov 28 2005 Joe Orton <[email protected]> 5.1.1-2
- update to 5.1.1
- remove pear subpackage
- enable pdo extensions (php-pdo subpackage)
- remove non-standard conditional module builds
- enable xmlreader extension
* Thu Nov 10 2005 Tomas Mraz <[email protected]> 5.0.5-6
- rebuilt against new openssl
* Mon Nov 7 2005 Joe Orton <[email protected]> 5.0.5-5
- pear: update to XML_RPC 1.4.4, XML_Parser 1.2.7, Mail 1.1.9 (#172528)
* Tue Nov 1 2005 Joe Orton <[email protected]> 5.0.5-4
- rebuild for new libnetsnmp
* Wed Sep 14 2005 Joe Orton <[email protected]> 5.0.5-3
- update to 5.0.5
- add fix for upstream #34435
- devel: require autoconf, automake (#159283)
- pear: update to HTTP-1.3.6, Mail-1.1.8, Net_SMTP-1.2.7, XML_RPC-1.4.1
- fix imagettftext et al (upstream, #161001)
* Thu Jun 16 2005 Joe Orton <[email protected]> 5.0.4-11
- ldap: restore ldap_start_tls() function
* Fri May 6 2005 Joe Orton <[email protected]> 5.0.4-10
- disable RPATHs in shared extensions (#156974)
* Tue May 3 2005 Joe Orton <[email protected]> 5.0.4-9
- build simplexml_import_dom even with shared dom (#156434)
- prevent truncation of copied files to ~2Mb (#155916)
- install /usr/bin/php from CLI build alongside CGI
- enable sysvmsg extension (#142988)
* Mon Apr 25 2005 Joe Orton <[email protected]> 5.0.4-8
- prevent build of builtin dba as well as shared extension
* Wed Apr 13 2005 Joe Orton <[email protected]> 5.0.4-7
- split out dba and bcmath extensions into subpackages
- BuildRequire gcc-c++ to avoid AC_PROG_CXX{,CPP} failure (#155221)
- pear: update to DB-1.7.6
- enable FastCGI support in /usr/bin/php-cgi (#149596)
* Wed Apr 13 2005 Joe Orton <[email protected]> 5.0.4-6
- build /usr/bin/php with the CLI SAPI, and add /usr/bin/php-cgi,
built with the CGI SAPI (thanks to Edward Rudd, #137704)
- add php(1) man page for CLI
- fix more test cases to use -n when invoking php
* Wed Apr 13 2005 Joe Orton <[email protected]> 5.0.4-5
- rebuild for new libpq soname
* Tue Apr 12 2005 Joe Orton <[email protected]> 5.0.4-4
- bundle from PEAR: HTTP, Mail, XML_Parser, Net_Socket, Net_SMTP
- snmp: disable MSHUTDOWN function to prevent error_log noise (#153988)
- mysqli: add fix for crash on x86_64 (Georg Richter, upstream #32282)
* Mon Apr 11 2005 Joe Orton <[email protected]> 5.0.4-3
- build shared objects as PIC (#154195)
* Mon Apr 4 2005 Joe Orton <[email protected]> 5.0.4-2
- fix PEAR installation and bundle PEAR DB-1.7.5 package
* Fri Apr 1 2005 Joe Orton <[email protected]> 5.0.4-1
- update to 5.0.4 (#153068)
- add .phps AddType to php.conf (#152973)
- better gcc4 fix for libxmlrpc
* Wed Mar 30 2005 Joe Orton <[email protected]> 5.0.3-5
- BuildRequire mysql-devel >= 4.1
- don't mark php.ini as noreplace to make upgrades work (#152171)
- fix subpackage descriptions (#152628)
- fix memset(,,0) in Zend (thanks to Dave Jones)
- fix various compiler warnings in Zend
* Thu Mar 24 2005 Joe Orton <[email protected]> 5.0.3-4
- package mysqli extension in php-mysql
- really enable pcntl (#142903)
- don't build with --enable-safe-mode (#148969)
- use "Instant Client" libraries for oci8 module (Kai Bolay, #149873)
* Fri Feb 18 2005 Joe Orton <[email protected]> 5.0.3-3
- fix build with GCC 4
* Wed Feb 9 2005 Joe Orton <[email protected]> 5.0.3-2
- install the ext/gd headers (#145891)
- enable pcntl extension in /usr/bin/php (#142903)
- add libmbfl array arithmetic fix ([email protected], #143795)
- add BuildRequire for recent pcre-devel (#147448)
* Wed Jan 12 2005 Joe Orton <[email protected]> 5.0.3-1
- update to 5.0.3 (thanks to Robert Scheck et al, #143101)
- enable xsl extension (#142174)
- package both the xsl and dom extensions in php-xml
- enable soap extension, shared (php-soap package) (#142901)
- add patches from upstream 5.0 branch:
* Zend_strtod.c compile fixes
* correct php_sprintf return value usage
* Mon Nov 22 2004 Joe Orton <[email protected]> 5.0.2-8
- update for db4-4.3 (Robert Scheck, #140167)
- build against mysql-devel
- run tests in %%check
* Wed Nov 10 2004 Joe Orton <[email protected]> 5.0.2-7
- truncate changelog at 4.3.1-1
- merge from 4.3.x package:
- enable mime_magic extension and Require: file (#130276)
* Mon Nov 8 2004 Joe Orton <[email protected]> 5.0.2-6
- fix dom/sqlite enable/without confusion
* Mon Nov 8 2004 Joe Orton <[email protected]> 5.0.2-5
- fix phpize installation for lib64 platforms
- add fix for segfault in variable parsing introduced in 5.0.2
* Mon Nov 8 2004 Joe Orton <[email protected]> 5.0.2-4
- update to 5.0.2 (#127980)
- build against mysqlclient10-devel
- use new RTLD_DEEPBIND to load extension modules
- drop explicit requirement for elfutils-devel
- use AddHandler in default conf.d/php.conf (#135664)
- "fix" round() fudging for recent gcc on x86
- disable sqlite pending audit of warnings and subpackage split
* Fri Sep 17 2004 Joe Orton <[email protected]> 5.0.1-4
- don't build dom extension into 2.0 SAPI
* Fri Sep 17 2004 Joe Orton <[email protected]> 5.0.1-3
- ExclusiveArch: x86 ppc x86_64 for the moment
* Fri Sep 17 2004 Joe Orton <[email protected]> 5.0.1-2
- fix default extension_dir and conf.d/php.conf
* Thu Sep 9 2004 Joe Orton <[email protected]> 5.0.1-1
- update to 5.0.1
- only build shared modules once
- put dom extension in php-dom subpackage again
- move extension modules into %%{_libdir}/php/modules
- don't use --with-regex=system, it's ignored for the apache* SAPIs
* Wed Aug 11 2004 Tom Callaway <[email protected]>
- Merge in some spec file changes from Jeff Stern ([email protected])
* Mon Aug 09 2004 Tom Callaway <[email protected]>
- bump to 5.0.0
- add patch to prevent clobbering struct re_registers from regex.h
- remove domxml references, replaced with dom now built-in
- fix php.ini to refer to php5 not php4
* Wed Aug 04 2004 Florian La Roche <[email protected]>
- rebuild
* Wed Jul 14 2004 Joe Orton <[email protected]> 4.3.8-3
- update to 4.3.8
- catch some fd > FD_SETSIZE vs select() issues (#125258)
* Mon Jun 21 2004 Joe Orton <[email protected]> 4.3.7-4
- pick up test failures again
- have -devel require php of same release
* Thu Jun 17 2004 Joe Orton <[email protected]> 4.3.7-3
- add gmp_powm fix (Oskari Saarenmaa, #124318)
- split mbstring, ncurses, gd, openssl extns into subpackages
- fix memory leak in apache2handler; use ap_r{write,flush}
rather than brigade interfaces
* Tue Jun 15 2004 Elliot Lee <[email protected]>
- rebuilt
* Thu Jun 3 2004 Joe Orton <[email protected]> 4.3.7-1
- update to 4.3.7
- have -pear subpackage require php of same VR
* Wed May 26 2004 Joe Orton <[email protected]> 4.3.6-6
- buildrequire smtpdaemon (#124430)
- try switching to system libgd again (prevent symbol conflicts
when e.g. mod_perl loads the system libgd library.)
* Wed May 19 2004 Joe Orton <[email protected]> 4.3.6-5
- don't obsolete php-imap (#123580)
- unconditionally build -imap subpackage
* Thu May 13 2004 Joe Orton <[email protected]> 4.3.6-4
- remove trigger
* Thu Apr 22 2004 Joe Orton <[email protected]> 4.3.6-3
- fix umask reset "feature" (#121454)
- don't use DL_GLOBAL when dlopen'ing extension modules
* Sun Apr 18 2004 Joe Orton <[email protected]> 4.3.6-2
- fix segfault on httpd SIGHUP (upstream #27810)
* Fri Apr 16 2004 Joe Orton <[email protected]> 4.3.6-1
- update to 4.3.6 (Robert Scheck, #121011)
* Wed Apr 7 2004 Joe Orton <[email protected]> 4.3.4-11
- add back imap subpackage, using libc-client (#115535)
* Tue Mar 02 2004 Elliot Lee <[email protected]>
- rebuilt
* Wed Feb 18 2004 Joe Orton <[email protected]> 4.3.4-10
- eliminate /usr/local/lib RPATH in odbc.so
- really use system pcre library
* Fri Feb 13 2004 Elliot Lee <[email protected]> 4.3.4-9
- rebuilt
* Mon Feb 2 2004 Bill Nottingham <[email protected]> 4.3.4-8
- obsolete php-imap if we're not building it
* Wed Jan 28 2004 Joe Orton <[email protected]> 4.3.4-7
- gd fix for build with recent Freetype2 (from upstream)
- remove easter egg (Oden Eriksson, Mandrake)
* Wed Jan 21 2004 Joe Orton <[email protected]> 4.3.4-6
- php-pear requires php
- also remove extension=imap from php.ini in upgrade trigger
- merge from Taroon: allow upgrade from Stronghold 4.0
* Wed Jan 21 2004 Joe Orton <[email protected]> 4.3.4-5
- add defattr for php-pear subpackage
- restore defaults: output_buffering=Off, register_argc_argv=On
- add trigger to handle php.ini upgrades smoothly (#112470)
* Tue Jan 13 2004 Joe Orton <[email protected]> 4.3.4-4
- conditionalize support for imap extension for the time being
- switch /etc/php.ini to use php.ini-recommended (but leave
variables_order as EGPCS) (#97765)
- set session.path to /var/lib/php/session by default (#89975)
- own /var/lib/php{,/session} and have apache own the latter
- split off php-pear subpackage (#83771)
* Sat Dec 13 2003 Jeff Johnson <[email protected]> 4.3.4-3
- rebuild against db-4.2.52.
* Mon Dec 1 2003 Joe Orton <[email protected]> 4.3.4-2
- rebuild for new libxslt (#110658)
- use --with-{mssql,oci8} for enabling extensions (#110482)
- fix rebuild issues (Jan Visser, #110274)
- remove hard-coded LIBS
- conditional support for mhash (Aleksander Adamowski, #111251)
* Mon Nov 10 2003 Joe Orton <[email protected]> 4.3.4-1.1
- rebuild for FC1 updates
* Mon Nov 10 2003 Joe Orton <[email protected]> 4.3.4-1
- update to 4.3.4
- include all licence files
- libxmlrpc fixes
* Mon Oct 20 2003 Joe Orton <[email protected]> 4.3.3-6
- use bundled libgd (#107407)
- remove manual: up-to-date manual sources are no longer DFSG-free;
it's too big; it's on the web anyway; #91292, #105804, #107384
* Wed Oct 15 2003 Joe Orton <[email protected]> 4.3.3-5
- add php-xmlrpc subpackage (#107138)
* Mon Oct 13 2003 Joe Orton <[email protected]> 4.3.3-4
- drop recode support, symbols collide with MySQL
* Sun Oct 12 2003 Joe Orton <[email protected]> 4.3.3-3
- split domxml extension into php-domxml subpackage
- enable xslt and xml support in domxml extension (#106042)
- fix httpd-devel build requirement (#104341)
- enable recode extension (#106755)
- add workaround for #103982
* Thu Sep 25 2003 Jeff Johnson <[email protected]> 4.3.3-3
- rebuild against db-4.2.42.
* Sun Sep 7 2003 Joe Orton <[email protected]> 4.3.3-2
- don't use --enable-versioning, it depends on libtool being
broken (#103690)
* Sun Sep 7 2003 Joe Orton <[email protected]> 4.3.3-1
- update to 4.3.3
- add libtool build prereq (#103388)
- switch to apache2handler
* Mon Jul 28 2003 Joe Orton <[email protected]> 4.3.2-8
- rebuild
* Tue Jul 22 2003 Nalin Dahyabhai <[email protected]> 4.3.2-7
- rebuild
* Tue Jul 8 2003 Joe Orton <[email protected]> 4.3.2-6
- use system pcre library
* Mon Jun 9 2003 Joe Orton <[email protected]> 4.3.2-5
- enable mbstring and mbregex (#81336)
- fix use of libtool 1.5
* Wed Jun 04 2003 Elliot Lee <[email protected]>
- rebuilt
* Tue Jun 3 2003 Joe Orton <[email protected]> 4.3.2-3
- add lib64 and domxml fixes
* Tue Jun 3 2003 Frank Dauer <[email protected]>
- added conditional support for mssql module (#92149)
* Fri May 30 2003 Joe Orton <[email protected]> 4.3.2-2
- update the -tests and -lib64 patches
- fixes for db4 detection
- require aspell-devel >= 0.50.0 for pspell compatibility
* Thu May 29 2003 Joe Orton <[email protected]> 4.3.2-1
- update to 4.3.2
* Fri May 16 2003 Joe Orton <[email protected]> 4.3.1-3
- link odbc module correctly
- patch so that php -n doesn't scan inidir
- run tests using php -n, avoid loading system modules
* Wed May 14 2003 Joe Orton <[email protected]> 4.3.1-2
- workaround broken parser produced by bison-1.875
* Tue May 6 2003 Joe Orton <[email protected]> 4.3.1-1
- update to 4.3.1; run test suite
- open extension modules with RTLD_NOW rather than _LAZYThe error is :
Build complete.
(It is safe to ignore warnings about tempnam and tmpnam).
+ with-oci8 enable-sigchild
/var/tmp/rpm-tmp.3167: line 156: --with-oci8: command not found
error: Bad exit status from /var/tmp/rpm-tmp.3167 (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.3167 (%build)If i modify spec like this :
# Build /usr/bin/php-cgi with the CGI SAPI, and all the shared extensions
pushd build-cgi
build --enable-force-cgi-redirect \
--enable-pcntl \
with-imap=shared with-imap-ssl \
enable-mbstring=shared enable-mbstr-enc-trans \
--enable-mbregex \
--with-ncurses=shared \
--with-gd=shared \
--enable-bcmath=shared \
enable-dba=shared with-db4=%{_prefix} \
--with-xmlrpc=shared \
--with-ldap=shared \
--with-mysql=shared,%{_prefix} \
--with-mysqli=shared,%{_bindir}/mysql_config \
--enable-dom=shared \
--with-dom-xslt=%{_prefix} --with-dom-exslt=%{_prefix} \
--with-pgsql=shared \
--with-snmp=shared,%{_prefix} \
--enable-soap=shared \
--with-xsl=shared,%{_prefix} \
enable-xmlreader=shared enable-xmlwriter=shared \
--enable-fastcgi \
--enable-pdo=shared \
--with-pdo-odbc=shared,unixODBC,%{_prefix} \
--with-pdo-mysql=shared,%{_prefix} \
--with-pdo-pgsql=shared,%{_prefix} \
--with-pdo-sqlite=shared,%{_prefix} \
# --with-pdo-oci=shared,$ORACLE_HOME \
--with-oci8=shared,$ORACLE_HOME/lib \
--enable-sigchild
popdI'm getting :
Build complete.
(It is safe to ignore warnings about tempnam and tmpnam).
+ with-oci8=shared,/u01/app/oracle/product/10.2.0/db_1/lib enable-sigchild
/var/tmp/rpm-tmp.11885: line 156: --with-oci8=shared,/u01/app/oracle/product/10.2.0/db_1/lib: No such file or directory
error: Bad exit status from /var/tmp/rpm-tmp.11885 (%build)
Please help.and a bit further :
diff:
12,13c12,13
< %define oci8_test_system_password tiger
< %define oci8_test_connection_string localhost/lhome
%define oci8_test_system_password oracle
%define oci8_test_connection_string localhost/orcl2136,138c136,137
< Requires: php-common = %{version}-%{release}, php-pdo
< # oracle-instantclient-basic = %{ociver} php-pdo
< #BuildRequires: oracle-instantclient-devel = %{ociver}
Requires: php-common = %{version}-%{release}, oracle-instantclient-basic = %{ociver} php-pdo
BuildRequires: oracle-instantclient-devel = %{ociver}339c338
< \$user = "scott";
\$user = "system";487c486,487
< with-oci8 enable-sigchild
--with-pdo-oci=shared,instantclient,/usr,%{ociver} \
--with-oci8=shared,instantclient,/usr/lib/oracle/%{ociver}/client/lib --enable-sigchild496c496
< disable-pdo disable-xmlreader --disable-xmlwriter
disable-pdo disable-xmlreader --disable-xmlwriter506,508c506,508
< #export PDO_OCI_TEST_DSN=oci:dbname=%{oci8_test_connection_string}
< #export PDO_OCI_TEST_USER=system
< #export PDO_OCI_TEST_PASS=%{oci8_test_system_password}
export PDO_OCI_TEST_DSN=oci:dbname=%{oci8_test_connection_string}
export PDO_OCI_TEST_USER=system
export PDO_OCI_TEST_PASS=%{oci8_test_system_password}571c571
< pdo pdo_mysql pdo_pgsql pdo_odbc pdo_sqlite; do
pdo pdo_mysql pdo_pgsql pdo_odbc pdo_sqlite pdo_oci; do589c589
< #cat files.pdo_oci >> files.oci8
cat files.pdo_oci >> files.oci8rpmbuild -bi
+ '[' /var/tmp/php-root '!=' / ']'
+ rm -f /var/tmp/php-root/etc/httpd/conf/httpd.conf /var/tmp/php-root/etc/httpd/conf/httpd.conf.bak
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip
+ /usr/lib/rpm/brp-strip-static-archive
+ /usr/lib/rpm/brp-strip-comment-note
Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.40673
+ umask 022
+ cd /usr/src/redhat/BUILD
+ cd php-5.2.3
+ cd build-apache
+ export NO_INTERACTION=1 REPORT_EXIT_STATUS=1 MALLOC_CHECK_=2
+ NO_INTERACTION=1
+ REPORT_EXIT_STATUS=1
+ MALLOC_CHECK_=2
+ unset TZ LANG LC_ALL
+ make test
Build complete.
Don't forget to run 'make test'.
PHP Warning: PHP Startup: gd: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: ldap: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: gd: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: ldap: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0etc. etc... -
Hello !
I work with Weblogic 701, oracle 9.2.0.1 database, oracle 9.2.0.2 client, and
oracle jdbc drivers classes12.zip
When I connect with the oci8 (not the thin) driver and try to execute the application,
I get this error :
java.lang.UnsatisfiedLinkError: Native Library D:\oracle\ora92\bin\orageneric9.dll
already loaded in another classloader
I have to shutdown weblogic and start it again. If I redeploy my application,
I get the same error and I have to shutdown again ...
and when I connect with the thin driver and try to execute the extract method
on a XMLType object, I always have a sqlException.
I see on the web that the extract method can only be applied with the oci8 driver.
How can I do ???
ThxHi. Go to oracle's site and download the very latest appropriate thin
driver for your DBMS, and put the driver ahead of all weblogic stuff in the
classpath the server is going to use.
Joe
Partyboy wrote:
Hello !
I work with Weblogic 701, oracle 9.2.0.1 database, oracle 9.2.0.2 client, and
oracle jdbc drivers classes12.zip
When I connect with the oci8 (not the thin) driver and try to execute the application,
I get this error :
java.lang.UnsatisfiedLinkError: Native Library D:\oracle\ora92\bin\orageneric9.dll
already loaded in another classloader
I have to shutdown weblogic and start it again. If I redeploy my application,
I get the same error and I have to shutdown again ...
and when I connect with the thin driver and try to execute the extract method
on a XMLType object, I always have a sqlException.
I see on the web that the extract method can only be applied with the oci8 driver.
How can I do ???
Thx -
Library already loaded Oracle OCI8
Hello !
I work with Weblogic 701, oracle 9.2.0.1 database, oracle 9.2.0.2 client, and
oracle jdbc drivers classes12.zip
When I connect with the oci8 (not the thin) driver and try to execute the application,
I get this error :
java.lang.UnsatisfiedLinkError: Native Library D:\oracle\ora92\bin\orageneric9.dll
already loaded in another classloader
I have to shutdown weblogic and start it again. If I redeploy my application,
I get the same error and I have to shutdown again ...
and when I connect with the thin driver and try to execute the extract method
on a XMLType object, I always have a sqlException.
I see on the web that the extract method can only be applied with the oci8 driver.
How can I do ???
ThxOCI drivers use native code, you can only load a JNI/native library once. It
seems that this library is being loaded within your application, either more
than once, or most probably within weblogic itself. So when your application
tries to initialise oci8 drivers, it fails because weblogic has already done
so before your application tries it.
Do you have a jdbc pool configured from within weblogic that is using oci8
drivers. If so you might want to disable that, alternately your application
might want to use that db pool.
Haider
"Partyboy" <[email protected]> wrote in message
news:328_3f0423c7$[email protected]..
>
Hello !
I work with Weblogic 701, oracle 9.2.0.1 database, oracle 9.2.0.2 client,and
oracle jdbc drivers classes12.zip
When I connect with the oci8 (not the thin) driver and try to execute theapplication,
I get this error :
java.lang.UnsatisfiedLinkError: Native LibraryD:\oracle\ora92\bin\orageneric9.dll
already loaded in another classloader
I have to shutdown weblogic and start it again. If I redeploy myapplication,
I get the same error and I have to shutdown again ...
and when I connect with the thin driver and try to execute the extractmethod
on a XMLType object, I always have a sqlException.
I see on the web that the extract method can only be applied with the oci8driver.
>
How can I do ???
Thx -
Oracle oci8 problem: OCIEnvNlsCreate() failed
Hi to all,
I have installed Apache 2.4.3, PHP 5.3.21 and Oracle Database 10gR2 on a Windows 2003 server. Please that is installed the complete Oracle DB* and not the only Oracle Client.
When I run phpinfo This is the result:
OCI8 Support enabled
Version 1.4.9
Revision $Id: 44bfa713983a99b3e59477f6532e5fb51b6dee94 $
Active Persistent Connections 0
Active Connections 0
Oracle Run-time Client Library Version 0.0.0.0.0
Oracle Instant Client Version 10.2
Temporary Lob support enabled
Collections support enabled
Directive Local Value Master Value
oci8.connection_class no value no value
oci8.default_prefetch 100 100
oci8.events Off Off
oci8.max_persistent -1 -1
oci8.old_oci_close_semantics Off Off
oci8.persistent_timeout -1 -1
oci8.ping_interval 60 60
oci8.privileged_connect Off Off
oci8.statement_cache_size 20 20I have create a file connect.php in order to test my connection:
<?php
$dbHost = "win2003vm";
$dbHostPort="1521";
$dbServiceName = "myservice";
$usr = "myuser";
$pswd = "mypwd";
$dbConnStr = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)
(HOST=".$dbHost.")(PORT=".$dbHostPort."))
(CONNECT_DATA=(SERVICE_NAME=".$dbServiceName.")))";
if(!$dbConn = oci_connect($usr,$pswd,$dbConnStr)){
$err = oci_error();
trigger_error('connection failed: ' . $err['message'], E_USER_ERROR);
$strSQL = "SELECT SYSDATE FROM DUAL";
$stmt = oci_parse($dbConn,$strSQL);
if ( ! oci_execute($stmt) ){
$err = oci_error($stmt);
trigger_error('Query failed: ' . $err['message'], E_USER_ERROR);
while(oci_fetch($stmt)){
$rslt = oci_result($stmt, 1); print "<h3>Query result: ".$rslt."</h3>";
?>But when I run the php file, this error is displayed:
Warning: oci_connect(): OCIEnvNlsCreate() failed. There is something wrong with your system - please check that PATH includes the directory with Oracle Instant Client libraries in C:\www\win2003vm\connect.php on line 13 Fatal errorCan someone help me ?
Thank You and best regards
GaetanoThe reason the error mentions Instant Client is because this text was
compiled into the DLL when it was built using Instant Client. You can
ignore this message phrasing quirk and focus on why OCIEnvNlsCreate()
failed. Seeing the C code might help explain why the 'wrong' text is
shown:
errstatus = OCIEnvNlsCreate(&OCI_G(env), PHP_OCI_INIT_MODE, 0, NULL, NULL, NULL, 0, NULL, 0, 0);
if (errstatus == OCI_ERROR) {
#ifdef HAVE_OCI_INSTANT_CLIENT
php_error_docref(NULL TSRMLS_CC, E_WARNING, "OCIEnvNlsCreate() failed. There is something wrong with your system - please check that " PHP_OCI8_LIB_PATH_MSG " includes the directory with Oracle Instant Client libraries");
#else
php_error_docref(NULL TSRMLS_CC, E_WARNING, "OCIEnvNlsCreate() failed. There is something wrong with your system - please check that ORACLE_HOME and " PHP_OCI8_LIB_PATH_MSG " are set and point to the right directories");
#endifDo you have other Oracle libraries that are causing a library clash?
Did you reboot after installing? Is there some permission issue with
the web server environment? Are you using Apache or ISS. Does this
help:
https://blogs.oracle.com/opal/entry/how_to_use_iis_php_and_oracle
Also see "Commonly Seen Connection and Environment Errors" on p 107 of
http://www.oracle.com/technetwork/topics/php/underground-php-oracle-manual-098250.html
You may be interested that your $dbConnStr can be simplified. See
"Easy Connect String" on p 104 of the above book. The variable can be:
$dbConnStr = "${dbHost}:${dbHostPort}/${dbServiceName}";In fact, since you are using the default port, it could even be just:
$dbConnStr = "${dbHost}/${dbServiceName}"; -
Hi All,
I am able to connect with a oracle database using the thin driver(windows os),
but not able to connect with the oci8 driver, inspite of putting the dll that is required.
It is throwing the exception below,
Exception in thread "main" java.lang.UnsatisfiedLinkError: get_env_handle
at oracle.jdbc.oci8.OCIEnv.getEnvHandle(OCIEnv.java:70)
at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java:359)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:252)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va, Compiled Code)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at java.sql.DriverManager.getConnection(DriverManager.java:457)
at java.sql.DriverManager.getConnection(DriverManager.java:159)
at JDBCVersion.verMeth(JDBCVersion.java, Compiled Code)
at JDBCVersion.main(JDBCVersion.java:41)
ArunActually, I meant a version conflict between the Oracle JDBC drivers (in classes12.zip) and the installed OCI binaries on the same computer. If both the JDBC and OCI dll's those that were installed from the same Oracle distribution media you should not be getting these errors. Double check your path and classpath. Make sure the versions are precisely the same (8.1.7 for example, not just 8i).
Chuck -
Hi, I am currently working on iPlanet 6.0 SP4 with oracle 8.1.6. I am planning to make my application language independent. while testing I figured out that if i use oci8 driver or oracle, it doesn't support other language characters while the thin driver supports fine. Can anybody help me regarding this? Is this a bug, or some possible configuration issue? Has somebody came across this problem before? How do i go about it ?
We faced same issue. Looks like the native driver does not support the automatic data encoding/decoding from/to database. You can always workaround this by reading everything as byte stream and then by letting java handle the encoding/decoding. But we decided to use type4 thin driver which does this automatically if you set the content type. Anyway we are told that later versions of IAS may not support native drivers, so if you are serious about multi language shift to type4 thin drivers now itself.
-
DAC Server with Oracle XE database
Hi
I've installed on my personel computer Oracle BI EE 10.1.3.3.3 and BI Applications 9.1.5
I've only installed the client version of Informatica 8
When I'm starting the DAC Client, I cannot create any connexion because I've only the choice between DB2, MSSQL, Oracle Thin and Oracle OCI8.
Is there a way to use my Oracle XE database ?
ThanksI assume you meant BI Applications 7.9.5 I am quite anxious to see BI Apps 9.1.5.
When you try to run the product with unsupported Databases (even Oracle ones) all bets are off.
That being said if the XE DB is local to that environment it does install OCI libraries and creates a TNS file. You can use OCI8. I have never used it with the DAC but it worked just fine for BI EE. -
I am using developer 3.0 on the NT server machine, with oracle 8
First of all when i start my computer one error message raise that is "one of your service is not running please check the event log". I saw the event log that service is oraclestartorc1. who can i start this service. the other oraclelistener service is also give error message in starting.
so next thing is when i click on the connection UI to make a new connection. I click on the oracle oci8 and use localhost = 127.0.0.1 and protocol = TCP and SID = orcl then error message comes that "ocijdbc8 is not in share path" who can i remove this problem also. I also use BEQ protocol to connect but the error message is same. When i use oracle thin driver then it raise message "could not establish the connection with adapter". Who can i remove this also. when i use the jdbc-odbc bridge it success the connection in test. But it does not show in connection. Who can i get driver for oci8, oci7 or for thin. Simply i want to connect my computer local database. my oracle directory is "orant" please help me thanks..
nullJawada,
Try the following:
1. Make sure your ORACLE_HOME directory is in your PATH (JDeveloper needs this so it can find the OCI driver's client-side DLL).
2. Make sure you have an alias set up for your database in your TNSNAMES.ORA file (usually located in ORACLE_HOME\network\admin). I believe previous posts to your other questions provided instructions for this.
3. Within JDeveloper, select Tools | IDE Options... from the menu. Choose the Environment Tab, and in the Oracle Home section, choose the name of your Oracle Home or choose Default Home from the Select an Oracle Home list. (this isn't really required unless you have multiple Oracle Home's installed on your machine).
4. When creating your connection within JDeveloper:
a. Choose Oracle JDBC OCI-8 from the Select a JDBC Driver list.
b. Choose Existing TNS Names from the Select a Connection Method list.
c. Choose the alias for your database from the TNS Service list (this list will not appear until you choose Existing TNS Names from the Connection Method list.
null
Maybe you are looking for
-
How to measure performance of supplier when using scheduling agreement ?
Hello all, My client has an absolute need to be able to measure the performance of its suppliers based on delivery dates and delivered quantities. That is to say he needs to be able to compare what dates and quantities were asked to what has been rea
-
Hello All, I have a VI that takes ages (well, about 20 seconds) to start. When I press the arrow, it does nothing (arrow is not in 'running mode', the front panel's grid still there) for about 20 second before running normally. I did put a probe at t
-
JBCL 2.0 and Oracle 8.0.5 Objects Option
I4m working with JDeveloper 3.1.1.2 using JBCL components and Data Express to connect to an Oracle 8.0.5 database with Objects Option. I use a valid SQL like : SELECT C.DENOMINACION AS DENOMINACION, C.OBSERVACIONES AS OBSERVACIONES, C.FECHA AS FECHA,
-
Hi I'm running latest 10.8.2 on a brand new Mac Mini. I have several email accounts. On the latest one I've set up, for no apparent reason, the signature keeps deleting. So, when I compose a mail... no signature. When I investigate in Preferences
-
Hi Experts, I have a requirement to show two graph types. One as background another for representing data in foreground. For the graph to show background; the color bounds must be shown vertically and for that i am using Chart Type Stacke