DAC scheduler Tab: Next Trigger option

Hi All,
I am facing a problem with DAC scheduler option. My DAC server was down and by the time I bought it up, one of the executive plan's time has been crossed.
For Ex: If my executive plan "Run_Daily" is supposed to run at 5/14/2013 12:04AM, the bought the DAC server back up at 5/14/2013 12:45AM.
So, I did change the next trigger value of that "Execution Plan" to 5/14/2013 12:50AM such that it can get triggered at 5/14/2013 12:50. But unfortunately the job is not being triggered, but the "Next Trigger" value is being changed to next day 5/15/2013 12:04AM. Did anyone face the same issue? If so, how can it get corrected?
Thanks in Advance

Value would have not got updated i guess properly.
Otherwise by the time you put the next trigger timing it would have crossed the timing.
Whenever you have some issue in because of dac server is going down then I would suggest you to manually kick start EP.
Regards,
Veeresh Rayan

Similar Messages

  • I need an option to open a tab next to active tab

    In an array of many tabs in one window, I need an option to open a new tab next to the active tab I am working on. This can be added an an option in the tab settings

    Hello listerh, try the [https://addons.mozilla.org/en-us/firefox/addon/tab-control/ Tab Control add-on]
    thank you

  • SEVERE: An error occured while scanning for the next trigger to fire

    Hi All,
    I followed below steps to configure Oracle BI publisher scheduler on oracle 10g database.
    1.Log in to BI Publisher as a user with Administrator privileges and select the Admin tab.
    2.Under System Maintenance, select Scheduler Configuration.
    3.Enter the database connection information for the target Oracle database and user.
    Database Type: 10g
    Connection String: jdbc:oracle:thin://<hostname>:<port#>:<oracle SID>
    Username/Password for the database user
    Database Driver Class: oracle.jdbc.driver.OracleDriver
    4.Click the Test Connection button to make sure the connection information is valid.
    5.Click the Install Schema button to install the scheduler tables.
    6.Restart the BI Publisher application.
    The Schema installed successfully.
    But when I am starting the weblogic server I am getting below error and BI publisher application is not getting up.
    INFO: Handling 6 triggers that missed their scheduled fire-time.
    23-Dec-2011 05:29:38 org.quartz.core.ErrorLogger schedulerError
    SEVERE: An error occured while scanning for the next trigger to fire.
    org.quartz.JobPersistenceException: Couldn't acquire next trigger: Couldn't retrieve trigger: Invalid column name [See nested exception: org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]]
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1773)
    at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
    at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
    * Nested Exception (Underlying Cause) ---------------
    org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1126)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
    at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
    at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
    * Nested Exception (Underlying Cause) ---------------
    java.sql.SQLException: Invalid column name
    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:445)
    at oracle.jdbc.driver.OracleStatement.getColumnIndex(OracleStatement.java:3372)
    at oracle.jdbc.driver.OracleResultSetImpl.findColumn(OracleResultSetImpl.java:2009)
    at oracle.jdbc.driver.OracleResultSet.getBinaryStream(OracleResultSet.java:668)
    at org.apache.commons.dbcp.DelegatingResultSet.getBinaryStream(DelegatingResultSet.java:233)
    at org.quartz.impl.jdbcjobstore.oracle.OracleDelegate.getObjectFromBlob(OracleDelegate.java:154)
    at org.quartz.impl.jdbcjobstore.StdJDBCDelegate.selectTrigger(StdJDBCDelegate.java:2382)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1115)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
    at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
    at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
    23-Dec-2011 05:30:55 org.quartz.core.ErrorLogger schedulerError
    The system details are as below :
    BI Publisher version : 10.1.3.4
    Oracle DB : 10 G
    Weblogic server :10.3.2
    Please suggest to resolve this issue.
    Thanks,
    Sachin

    Hi,
    This errors occurs if you have configured some schema for the scheduler and configured it on BIP, but the configured schema is no longer available.
    That is why I am suggesting you to replace the current quartz.properties file with the original file that exits during installation.
    Then try to start the server, and see if the server starts without error.
    After that you can try to configure the scheduler from BIP console.
    thanks,
    sandeep

  • How to reset DAC scheduler

    We have a schedule to run a full ETL daily at 3am through DAC scheduler. After an unexpected downtime during the ETL run, the DAC schedule not working anymore. Even the execution is not running, the "Last Schedule Status" and "Status Description" still shows as "Running". And the "Next Trigger" column shows a date of two days ago (day of the downtime). As a result, the daily scheduled run does not happen anymore. Is there a way to reset it without recreating the schedule?
    Thanks.
    DAC 7.9.3

    Hi,
    could you click right on the "Last Schedule Status" and "Status Description" and change the status with stopped.
    Another way is to mark your run as completed to re-run a new full ETL.
    Hope it helps,
    Benoit

  • New tab next to current tab

    ok so... why has the simple process of browsing the web been made so damn annoying ?
    i want to open a new tab next to a current tab and what do i have to do for this to happen ?
    1) i see if there is any option for it in the options - there is nothing
    2) i type in about:config and see if can find anything there - nothing
    3) i go to google and search for some answers - nothing (the thread is probably closed)
    4) i register an account to post a replay - nothing (the thread is closed - http://support.mozilla.org/en-US/questions/926633)
    5) i have to look for a place where i could post a new thread and ask why is that thread closed where i could easilly have posted my question
    6) so - how do i make it happen without installing any special addons and why has this process been made so damn annoying ?
    /firefox 33.1, win7
    (i already installed that addon and now also updated ff, so lets see if anything changes)

    ##Support threads that are over 6 months old are automatically locked by the forum software, as with that thread which was started in May of 2012. As of very recently, Google shouldn't be indexing locked support threads here any more. I don't know how quickly that takes effect. Sorry for your inconvenience.##
    my only inconvenience is the fact that you are trying to remove the whole point of having a google search engine and the freedom of the internet in the first place - why are the threads closing automatically without any automatic option to re-open them to add to a discussion on the free interwebz ?
    tabmix plus is even more annoying because it wants to make the tabs look pointlessly "fancy" and you need to go through 15 pages of options to get the normal visual back (if its even possible)
    i did set that preference to false, but it did not change anything (it was true before)

  • BI Publisher - Scheduler Tab Disabled

    Hi all --
    I am trying to schedule a report in BI publisher to see how it works. I have done the scheduler configuration using Oracle 10g's test schema "SH". When I click on the Test Connection option I get the message "Connection Established Successfully". Then I click on the Install Schema.
    I have also added XMLP_SCHEDULER Role under Administrator.
    I have re-started the BI Server and BI Publisher. But still the Schedule Tab is not showing up.
    Any ideas?
    Thanks
    Kingsly

    I have solved the Problem. I had to re-start the application server. However, I do have couple of other issues.
    First, I do not the see the "Notification" heading where I can enter an email address.
    Second, under the "Delivery" heading, I have a message No Server Available for Delivery"
    Thanks
    Kingsly

  • Sky Planner and Scheduled tab

    I've had problems with "losing" programmes that I have set up to record on a weekly basis before. I tend to record a few regular weekly series and watch them in blocks when I'm in the mood. Occasionally I notice that a series has just stopped recording. Disappeared altogether. I used to blame myself but now I'm convinced its the box or Planner or ...something over which I have no control. For instance a programme I record regularly is "Chicago Fire" .. Tuesday 9pm, Sky Living. Watched last weeks, its sitting there showing that is viewed, its series linked. But next weeks episode is sitting there with no "R" on it. Instead , its in my scheduled tab marked "Next Episode" and it informs me that Sky will look for the next episode and record it automatically for me when it finds it. ITS NEXT TUESDAY ...9PM....SKY LIVING!!! Whats the point of having a planner that does things automatically...if it doesnt! I only noticed this by chance. Otherwise it would have been another series lost! Incidentally...."Chicago Fire " was sitting on my Scheduled Tab for months marked "Next Series" saying that it would pick that up automatically when it started.....it didnt. It has never picked up any new series in fact. I phoned Sky about this and all I get is..."have you tried resetting the Planner...dont worry , you wont lose anything!". I've worked in IT support long enough to know that means "I have no idea whats wrong....try turning it off and on again".  This is really shoddy Sky.

    Thanks, I do appreciate your reply but I'm not a great believer in the Planner Rebuild type method as it doesnt really get anyone anywhere in the long run. I'd really rather highlight that there actually is a problem and that Sky should a) acknowledge it and b) fix it. As i said above "Have you tried turning it off and on again" just amounts to the support people saying "Yeah, havent got a clue why that happens, and cant be bothered to deal with it really". Theres no logical reason why this method would fix anything, and it might lose some stuff that I already have. From reading through very many other threads I keep seeing the same thing "I've done several Planner rebuilds but it still keeps happening". Tbh, we're on the verge of just writing down a weekly schedule on paper and making sure we download programmes ourselves. It really gets silly when you think you have been recording a whole series and when you come to view it find that it stopped at episode 5. There really is no point in an automatic planner, that isnt automatic and doesnt plan.

  • Open Tab next to current tab

    I know there is a post on this for Safari for WIndows But I am on a mac.
    I want to be able to open a tab next to the tab I am working in even if there are already several tabs open.
    Usually I am browsing the internet looking for something and I will open a lot of tabs some related to what I am looking for and some not.
    When I do find what I am looking for, I want it to open it in a new tab and next to the tab I am working in rather than it going to the end of all my tabs, which is usually off the tab bar because I have so many open.
    I know that Safari can run in 32 bit and I can get saft to work again but I like Safari in 64 bit.
    Is there a terminal command I can use?
    Please help!!!!!

    Glims Beta is available for 64 bit Safari - it gives you some options to change tab behaviour - remove Saft before installing it.
    Regards

  • I don't know how to set up closingFirefox to have all open tabs next time when I open it, without calling RESTORE PREVIOUS SESSION

    Question
    I don't know how to set up closingFirefox to have all open tabs next time when I open it, without calling RESTORE PREVIOUS SESSION

    Tools > Options > General
    :At the top '''When Firefox starts:''' Show my windows and tabs from last time
    You can still bring up your home page later.

  • PO - Item Data - Delivery Schedule Tab - Delivered qty, issued qty, GR qty

    Hi Frens,
    In a Purchase Order, under Item data < delivery schedule tab, we have delivered quantity, issued quantity and GR quantity fields.
    Is there any TABLE to find out these quantities against PO.
    Thanks and Regards,
    CK Vikas

    >
    CK Vikas wrote:
    > Hi Raj, You mean EKBE?
    Yes EKBE is the right table for your requirement.

  • Display only/Grey out Delivery Schedule tab in the PO

    We are not going to use Delivery Schedule tab at all. Business wants us to Grey out the delivery schedule tab. Is it possible to make all fields under Delivery Schedule as display only? If yes, how can I do that? But, I don't want PO line qty to be grayed out.
    Fields like, delivery date, scheld qty, stat.del date etc.
    Thanks everyone.

    you better convince your business to wait for a couple months and then rethink this requirement.
    You may not have the full understanding yet and have not made a lot experience.
    in this tab you can add further requisitions to your PO item, you can close requisitions in case you order less than a requisition, you have to change the statistical delivery date in some case when you are using vendor evaluation, you may have to split the order quantity into several delivery dates  if your vendor informs you that he cannot supply you at one time with all quantity.
    Just to save you money that you may spend into a development which has to be turned off a little later.

  • Up/Down Arrow keys do not perform their function on SOME websites or at SOME times, on other websites and at other times these keys work fine, updated firefox, restarted computer. turned off cursor key option in Advanced tab, using autoscrolling option.

    Up/Down Arrow keys do not perform their function on SOME websites or at SOME times, on other websites and at other times these keys work fine, updated firefox, restarted computer. turned off cursor key option in Advanced tab, using autoscrolling option.

    You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"

  • I have a search window on a new tab that I don't want - how do I change it to show me recently closed tabs and other options?

    When I installed the Conduit toolbar, I must have changed a setting because I now see the Conduit Apps search on a new tab rather than my former list of recently closed tabs and other options. How do I change what appears on the new tab when I ask for one to be opened?

    See:
    *https://support.mozilla.org/kb/Search+bar

  • When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

    When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Error while accessing Scheduler Tab on xmlpserver

    Hi all
    While trying to schedule a publisher report,we are getting the following error
    java.lang.NoClassDefFoundError: oracle.xml.parser.v2.NSResolver
    at java.lang.J9VMInternals.verifyImpl(Native Method)
    at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
    at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
    at java.lang.J9VMInternals.newInstanceImpl(Native Method)
    at java.lang.Class.newInstance(Class.java:1325)
    We have done the scheduler configuration as given in the guide.
    The reports are running fine. We are getting this error while opening the scheduler tab and while scheduling the report
    Am i missing any specific configuration?
    Please help
    Thanks
    Preethe

    hi Preethe,
    have u tried with SFTP?
    following to my last post ;)
    Scheduler Tab on xmlpserver
    thanks,
    Saichand.v

Maybe you are looking for

  • How I can know if a user has the permission to read a file or not ?

    Hello, I have other question : How I can know if a user has the permission to read a file or not ? Smaine ThanK's

  • I have an iPod classic 160GB

    I never had any issues up until a few weeks ago that it started acting funny. Every time i connect it to iTunes it says that its corrupted and that it needs to be restored to its factory settings. I restore it. It syncs normally but once it reaches t

  • Limit PO Set up for SRM 5.0 Classic

    Hello All - I have seen questions in the forum and documentation that you can create a limit SC/PO/req (item cat B) from an SRM Shopping cart.  Can someone tell me how to set this up?  I have the 2 SRM books published by SAP and I have looked everywh

  • Write a debugger using JDI

    Hi, I am new to JDI and I want to create a debugger to listen to events like ClassUnloadEvent . I start the application that I want to debug with: java -Xdebug -Xrunjdwp:transport=dt_socket,server=y,address=80000 <mailclass> is this correct ? I than

  • ERROR ORA-01172, ORA-01151

    what is the solution for ORA-01172: recovery of thread 1 stuck at block 9 of file 2 ORA-01151: use media recovery to recover block, restore backup if needed this are the errors comeing when im useing ' alter database open' thank you!