DAC Server to DB Server Connection issue on Solaris 10

Hi,
I have a connection issue that has me completely miffed as to what is going on.
We have a Oracle DAC Server running on Solaris 10 that connects to the DAC repository inside a database on another host also running on Solaris 10. When I try and build a DAC execution plan I get an error where I unable to complete the build due to by repository connection being lost. Looking at the DAC logs you can see multiple entries of
32231 INFO Tue Oct 15 10:04:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32232 INFO Tue Oct 15 10:09:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32233 INFO Tue Oct 15 10:14:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32234 INFO Tue Oct 15 10:19:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32235 INFO Tue Oct 15 10:24:05 BST 2013 CONNECTION_ISSUE Repository ending polling
Then eventually you see connection lost.
When I check the DB host using dmesg I notice the following entry over and over
Oct 15 11:00:53 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
Oct 15 11:01:00 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge1: xcvr addr:0x0c - link is up 1000 Mbps full duplex
Oct 15 11:05:53 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
Oct 15 11:11:00 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge1: xcvr addr:0x0c - link is up 1000 Mbps full duplex
Oct 15 11:15:53 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
There is no entry for the link going down just up all the time. The timing in the logs match with the DAC logs which makes my think this is where the issue may lie.
root@v10emsu101 # dladm show-dev
bge0            link: up        speed: 1000 Mbps       duplex: full
bge1            link: unknown   speed: 0     Mbps       duplex: unknown
nxge0           link: up        speed: 1000 Mbps       duplex: full
nxge1           link: up        speed: 1000 Mbps       duplex: full
nxge2           link: up        speed: 1000 Mbps       duplex: full
nxge3           link: up        speed: 1000 Mbps       duplex: full
Does anyone have any idea on why this keeps occurring or can it safely be ignored?

Did you find a solution to your problem? It sounds like something we are experiencing.

Similar Messages

Lion server/Mountain Lion client connection issue

I am trying to set up our work Lion Server to use open directory. The DNS settings are fine on the server side but the Mountain Lion clients cannot bind to the server. We are hoping to get a static IP soon so the directors can access the network remotely but I want to get this cracked before I take that step.
The server was set up normally as far as I'm aware (I didn't set it up).
I'm wondering if I upgrade the server to Mountain Lion if that will help, it seems as though open directory is easier to manage wit ML. Would I need to reinstall server and start from scratch?
Any help much appreciated, excuse my ignorance I am a bit of a novice but do have some experience.

After force Quit the option Notes is not marked in the new configured Profile. I check it in a new VM and fresh clean install and have the same problem.
If is it not marked, the Sync not with the Server and save only localy.
Have you check it with an other Mac or Device too?

Sql Server Connection Issues

After reinstalling Windows Server 2008 R2 EE my SQL 2008 R2 Sp2 Instances have some connection issues.
The server were installed under the same hostname, but he got a new sid in my active directory.
On the server there one DB Engine MSSQLSERVER, two named Reporting Services for MS crm 4.0 and SCOM and one Analysis Services Instance.
The DB Engine will collect Data from another DB, before writing to Analysis Services.
Here are the problems on the server:
When I connect via SSMS remotly, I sometimes get this error: Failed to connect to server <hostname> ... Named Pipes Provider, error 40 - Could not open a connection to SQL Server - Error 5
Both RS Instances have many event log errors like "Report Server (Instance) cannot connect to the report server database.". RS Reports are working fine, but sometimes the rendering is taking a long
time.
The DB Engine Agent Job to collect Data sometimes throw the following error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult:
0x80004005 Description: "Unable to complete login process due to delay in opening server connection". End Error Error: 2013-12-10 06:03:40.41 Code: 0xC00291EC
User use Excel to connect to the Cube on my server. Often they got timeout errors. When they connect again it will work.
Are there any solutons on this?
Thanks a lot!

Hello,
The server were installed under the same hostname, but he got a new sid in my active directory.
Did you connect to SQL Server instance with Windows authentication? Since the SID of domain account is changed, the SQL Server instace may cannot verify the login account which stored in the master with old SID. In that case, please try to connect
SQL Server with SQL authentication and then readd the domian as login the instance.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Ethernet connectivity issue with Microsoft Small Business Server (SBS)

Just recently updated my OS to Yosemite, and am now having ongoing problems connecting to my company's Microsoft Small Business Server (SBS).
I'm having no other issues connecting to outside server's via wifi or ethernet, but once I connect to our local business server I lose internet connection and also my email account goes offline (Microsoft Outlook 2011). Sometimes the connection will intermittently return, but will be very slow and won't load images. I had no connection issue's before the update.
Anyone experienced a similar problem?

"That depends on what what resources you use the server for."
- I will be using the printer for print sharing and file sharing. There is an estimating application I will load on a Mac Mini and will want to share that to other desktops.

SAP Content Server Connectivity issue

Hi Friends,
We have installed Content server 6.40 on a standalone server after the installation i tried to open below link but its not opening.
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
This content server has to be connected to R3(ECC 6 EHP4 ) hence we went to t codes OAC0 and OACT to create content repository
We have created a content repository as below
Content Rep.    ZDMS
Description     ZDMS
Document Area : DMS document management system
Storage type: 04 HTTP content server
Version no.     0046   Content Server version 4.6
HTTP server     192.168.30.12(where the content server is installed)
Port Number     1090                        SSL Port Number
HTTP Script     ContentServer/ContentServer.dll
Phys. path      D:\usr\sap\FNS\SYS\global\
and when i am checking i am getting below error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
i have also created a entry in table SDOKPROF
as below but still same issue.
NAME = USEHTTPPLG
VALUE = OFF
and also we have run RSHTTP05 to check if any error but no errors.
Even when we are going in t code CSADMIN we are getting same error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
In dev_icm belwo error is showing.
** WARNING => Connection request from (2/3/0) to host: xxx.xxx.xx.xx, service: 1090 failed (NIECONN_REFUSED)
[Thr 5352] {000102ca} [icxxconn.c 2271]
Kindly help to solve this issue.
Thanks
Basis

Hi Deepak,
Thanks for your inputes i checked IIS and after the content server installation these website were not created hence i created it manully as per note 1823408 - Manual Creation of Website on Windows 2008 Server
I created SAP_Content_Server by following first 3 steps but after that 4 , 5 and 6 steps are not clear i dont see those option in ISS manger.
1. Go to Internet Information Services Manager from Start Menu >> Admintrative tools >> IIS manager
a) or Start Menu >> Run >> "Inetmgr"
2. Right Click on Sites >> "Add Website" to create a new Website.
a) Site name <Name of the webiste>
b) port <Port No>
c) Physical Path <path of the Content Server installation directory>
d) Application Pool >> Select "DefaultAppPool"
e) Click "OK"
f) Website will be created.
3. Right click on the newly created website >> "Add Application"
a) Alias "ContentServer"
b) Application Pool >> Select "AppPool_ContentServer"
c) Physical Path <path of the Content Server installation directory>
d) Click "OK"
Content Server Application will be created.
4. Double Click on the website >> Handler Mappings
a) Select "ISAPI.dll" from the list >> Edit Feature Permissions
b) Check the tick boxes for "Script" and "Execute"
c) Click "OK"
5. Double Click on the website >> Handler Mappings
a) Enable "Anonymous Authentication"
b) Enable "Basic Authentication"
c) Enable "Windows Authentication"
6. Double Click on the IIS Server name >> ISAPI and CGI Restrictions >> Click on "Add"
a) ISAPI or CGI Path <path of the Content Server installation directory,selecting "ContentServer.dll" >
b) Description "ContentServer.dll"
c) Check the tick box "Allow extension path to execute"
d) Click "OK"

MaxDB Connection Issue for Content Server

Hi All,
We have installed Content Server 6.40 on Windows 203 server.
We are able to visit the Url http://host:port/ContentServer/ContentServer.dll?serverInfo
But while creatng a repository i am facing issues..its throwing error that
"HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s"
Checked these two notes 698915, 301352 and ru the comman to register MaxDB drivers and got that message that the drivers registered successfulyy.
But still i am not able to create repository uing CSADMIN.
Also ,when tryng to connect to MaxDB using superdba or contro user ,its throwing error "-2 ERR_USRFAIL authorization failed "
Even the control user i amnot able to login.I am giving the password which i gave during installation.
Database is SDB
Pls suggest.
Regards
Ajay

Hello Ajay,
1. I recommend you to create the SAP ticket, if you failed to connect to MaxDB
using superdba or control user with known to you passwords.
2. Could you post the password, which you used during the installation.
In the past the issue was with using passwords more as 9 symbols with Unicode MAXDB.
If you was using, for example, "test123456" password => try to connect to the database
with u201Ctest12345u201D password < first 9 symbols of the password you used during the installation >.
Thank you and best regards, Natalia Khlopina

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].

See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

Sybase ODBC Connection Issue in Windows Server 2008 R2

Hi ,
We have three sybase odbc connection in Windows Server 2008 R2 server . One connection is not working now, it was working fine before 30 days.
I can ping the server address successfully from BO Server through "dsedit".
i have created the same connection in a diffrent server (Win server 2003),and it is working fine.
Sybase ASE Driver version 3.50.00.10
Please help me to overcome this issue.
Thanks,
Saurabh upadhyay

Hi Saurabh,
The error message you are reporting is telling us that you are using the very old ctlibrary ODBC Driver.
That is pretty much the only way you can get that error.
Run from a command prompt, isql -v that will return a version string. We can then verify the version.
However, the old ODBC driver will function with the newer client.
The old driver would read the sql.ini for the network address, and was also a translation layer between
the client application and the ASE.
Both were eliminated when Sybase released the "Native" ODBC Driver.
The ct_connect error states that the connection attempt is using ctlibrary.
In your ODBC configuration, Check to see in the ODBC Administrator and check to make
sure that the driver you are using for your DSN is the Adaptive Server Enterprise and not the
Sybase ASE ODBC Driver.
Also check the Drivers tab in the ODBC Admin. See what the actual file is listed for the driver.
sysybnt.dll
syodase.dll are unsupported drivers.
It would be to your advantage to open an incident with SAP for more complete support
Thank you,
Kevin

Outlook 2011 Connection Issue with Proxy Server after 10.8 Upgrade

Hello,
After upgrading my MBA to 10.8, my MS Outlook (Outlook Mac 2011) mail connection does not work for an exchange based mail account where a VPN/proxy server combination is involved. This was not an issue at all under 10.7. What's interesting is that it's not an issue with MS Outlook 2010 on my Parallels VM either under 10.8. There are no internet connectivity issues, I am able to connect to the internet using Safari and other browsers. Any help would be appreciated.
Thanks,
Manish

I was having a similar problem using Outlook 2011 running under Mountain Lion (10.8.2) on an MacBook Pro. When at work, behind our proxy server, I could not get Outlook to connect to a client's public Exchange server, but this worked fine without changing any settings when I was connected to our DMZ network or at home (no proxy server in these cases). My MacBook was configured to use "Auto Proxy Configuration", and Safari worked fine in all three locations (as did Apple mail)
Today, the Microsoft Office auto-updater downloaded an update, and since it was installed, the problem has been fixed and I've been able to connect to our client's external Exchange server event when behind our local proxy server (Outlook now reports that the latest installed update is 14.2.5)
Steve

Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

Hello,
I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance. I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server. However when going thru ISA I receive the
following Error.
Power View Cannot connect to the server due to a security issue. The server may not have been able to match the host for Silverlight. This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
I've seen a couple references to this issue but not much. This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that. http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
Any Ideas? Thanks.
Ryan

Hi Ryan,
Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Application server connection issue with jdev

Hi,
we have a fusion application instance, deployed in amazon cloud. I am able to connect to this instance/console using the browser.
I am able to login to weblogic - console, so credentials and everything is correct, now when I am giving same information in jdeveloper and trying connecting using jdev.
its failing 7 out or 9 tests which jdev do for connectivity. We have checked the proxy settings, but its not an issue, no proxy settings there.
Now we have almost check all forms and connection issues, but no help yet. Looking for immediate support.
Thanks in advance for any support.
-Vipin

Hi Oliver,
Thanks for the quick response, this is ouput
Testing JSR-160 Runtime
... failed.
Cannot establish connection.
Testing JSR-160 DomainRuntime
... skipped.
Testing JSR-88
... skipped.
Testing JSR-88-LOCAL
... skipped.
Testing JNDI
... skipped.
Testing JSR-160 Edit
... skipped.
Testing HTTP
... success.
Testing Server MBeans Model
... skipped.
Testing HTTP Authentication
... success.
2 of 9 tests successful.
Thanks
Vipin Kumar

"Safari can't find the server" - connection issues under Lion

Hi there,
Since upgrading to Lion, Safari has been displaying this odd and annoying behaviour, where, for some links to some web resources (like maybe 2 clicked links out of 10), it throws up a grey error page telling me it can't find the server (screenshot below):
Normally, this error would be evidience of an intenet connection issue (but it isn't). If I immediately try to find the same resource via another browser (Firefox or Chrome), those other browsers navigate to the site absolutely fine. Although, occasionally (though with less frequency) I'm also getting a similar "Can't find stuff" error with Chrome too.
In the Safari address bar (is this significant?) there isn't even a URL, but a file path to file:///Applications/Safari.app/Contents/Resources... what does that mean?
Hints from other threads would indicate that this is a Firewall issue, or maybe there's another third-party app causing problem, rather than a problem with Safari under Lion specifically.
But I'm really bugged and irrittate by this. Anyone had a similar experience? Anyone with any ideas? How might I go about finding out what's causing this and fixing it?
Best wishes,

It's most likely a problem with corrupted files in the Safari Cache or corrupted cookies.
Go to Safari menu bar
Click on Safari
Click "Empty Cache"
Restart Safari
If the problem persists...
Go to Safari -> Preferences
Go to privacy
Click "Remove All Website Data"
Restart Safari
Cheers - Lupunus

Exchange Server 2013 Service Pack Upgrade - Outlook connectivity issue

Hi,
After upgrading to Exchange Server 2013 service pack 1, we are unable to connect via Outlook 2010 or Outlook 2013. Outlook Web Access is working fine though. We have followed all the instructions, and have applied Outlook upgrades, but the issue remain the
same. Outlook was working fine before the upgrade.
Have we missed out something. I would highly appreciate if someone can help out? I'm not sure if this is the known issue as I can't seem to find anything on the internet.
Already applied the transport fix.
Thanks in advance!

Hi,
According to your description, your Outlook 2010 and Outlook 2013 come across the connectivity issue.
To narrow down the issue, I’d like to recommend the following troubleshooting:
1. Check if the issue happens on all Outlook users
2. Check the Outlook Anywhere connectivity by using ExRCA:
https://testconnectivity.microsoft.com/
Additionally, MAPI over HTTP is only supported when you use Outlook 2013 sp1 and Exchange 2013 sp1 at the same time. Since the issue also happens on Outlook 2010 client, we can firstly try the above troubleshooting.
If you have any question , please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Win2000 Server and OS 10.4.11 connection issues

We have 2 Macs running on a WIN2000 Server we have had no issues up until lately. We connect to a drive on the WIN2000 server and normally it will stay connected all day with no interruptions. Now we both are experiencing at least 2-3 times a day the drive is just disconnected and dropped off our desktop, no dialog box stating this, nothing. We don't even realize it's missing until we try and open something from the drive. We don't even get an error message when we try and save documents to the drive. So please help us. Is it the WIN2000 server or is it our MAC OS X we were wondering if it was the latest security update we have done?

Hi tsmonson-
If this is a fairly recent problem, and you did nothing to cause it and cannot find a logical explanation otherwise, all things point towards a possible server problem.
Have you had the folks that maintain the server take a look at it?
Luck-
-DaddyPaycheck

Powerpoint web sharing fails with "some presenting features are unavailable due to server connectivity issues"

Hi,
I am having problems getting PowerPoint sharing working with Lync 2013. My setup is as follows
Lync 2013 Enterprise pool (november 2013 updates) on Windows 2012 and
Windows 2012 webapp farm
Kemp HLB
Everything is working ok, including whiteboards and application sharing, but i cannot get the powerpoint sharing to work. I always get the "some presenting features are unavailable due to server connectivity issues" for internal or external
users.
The webapp looks healthy and there are no errors in the Lync server or the webapp event log. Discovery urls can be accessed and i have put the .net 3.5 as suggested in a few forums.
When a user starts the PowerPoint it successfully loads the file to the Lync file share and request goto the webapp server. I am using a HLB which shows me that requests are forwarded to the webapp farm. I have removed the HLB for testing and get the same
results.
I did log this with the forum a month or so ago, but I had a file upload issue then which is now solved, but the powerpoint sharing is not.
any ideas?
sg

I ran some diags on the client and i managed to find an error. This was in the client debug logs when trying to start a powerpoint presentation
54019;reason="The presentation at the WAC URL does not exist.";ClientType=Lync;Build=15.0.4551.1007
The url in the next line shows the paths which have the correct toplevel URLS (have changed the domain name in the pasted text)
Url="https://webapp.domain.com/m/ParticipantFrame.aspx?a=0&e=true&WopiSrc=https%3A%2F%2Flyncpool.domain.com%2FDataCollabWeb%2Fwopi%2Ffiles%2FD-1-D0F5EA&access_token=AAMFEPAUXKWO9TdVleKl-gn7iQAGEKvoSrQNqS1_i2tD90k7zj2BEPAUXKWO9TdVleKl-gn7iQCCAn40gyABxKA-5znlMODU0Kuz8ZHOBR7Q_183_BeUZcSWhjdOOIYIrg5RP8De0AgIDURhdGFDb2xsYWJXZWI&<fs=FULLSCREEN&><rec=RECORDING&><thm=THEME_ID&><ui=UI_LLCC&><rs=DC_LLCC&><na=DISABLE_ASYNC&>"</diagHeader><progressReports/></error></reportError>
sg

DAC Server to DB Server Connection issue on Solaris 10

Similar Messages

Maybe you are looking for