DAC Source System Container

Hello All,
I am trying to set up as erver to host Oracle BI Apps on a Windows Server.
I have been following the installation guide and at the moment, trying to create a copy of a source system container in DAC for Oracle 11.10.5.
All the required components are installed and configured on the same server and the DAC client does connect to the DAC server.
Everytime I have tried to create a copy of the source system container, the creation fails.
I would appreciate any help/pointers in this regard.
Thanks,
Anisha

I got in touch with oracle support, and while on the web-conference, the container creation was successful.
I am not sure how it worked but it did.
The only things that changed were:
1. I was building a Execution plan with the Source Container itself, for which I had to add the source DB connection name : ORACLE_11_10_5 and the source File system name: ORACLE_11_10_5_FileSystem.
2. The table space size in the database was increased due to another failure with informatica just before I got on the phone with Oracle support. Oracle support mentioned that the source system container creation does not connect to the database so this should not be the reason.
Please let me know if either of these reasons fit.
Thanks,
Anisha

Similar Messages

Rename Source System Container in DAC

Hi Friends
I want to rename my source container name .....I came to know that we will be having directly that option in DAC under File-->Rename Source System Container along with other User Management options But I am currently unable to view them .Are their any configurations required..........thanks in advance...
With Regards
Ven

Hi,
You cannot rename the vanilla Source System Containers, Only copies of the Source System Containers inside which you do your customizations are allowed for rename. Hence it is mandatory that you make a copy, then in the list you will get the copies of Source System Containers not the original vanilla containers.
Note: DAC uses vanilla Source System Containers to track the customizations you have done, so it is very important that you donot modify anything in vanilla containers.
Thanks,
Sreekanth Jala

Source system contain more than one fold then they are not processed

when a mail box for a source system contain more than one fold they are not necessarily manage in the right sequence order (FIFO)
The folders stand for material update flows.

Hi XI Experts,
I have a problem with source directory of the File Adapter,
XI system is not reading the files from the source directory in the sequence when there is more than one folder .
See the below description regarding the same.
"when a mail box for a source system contain more than one fold they are not necessarily manage in the right sequence order (FIFO)
The folders stand for material update flows."
Please update me as soon as possible.
Regards
sreenivasulu

DAC source system parameters not being generated

HI all,
We are implementing BI apps 7962 with Informatica 861 Hot FX11, OBIEE 101341 on Linux5. We have installed and set up the configuration completely. The Informatica services are created and the DAC was configured with the Source System Parameters. When I generated the execution plan parameters, the files are being generated in the SRC files folder. But it seems like the source system parameters I set in the DAC client are not being picked up.
For example I have set the Initial Extract date as 1/1/2008. But when I ran the load and saw the log files it still seems like the Initial Extract date is 1/1/1970. We have set the custom property for Integration Service overrideMpltVarWithMapVar as Yes. Please help me if any one has seen this before.
Thanks
MN
Edited by: MNRK on Apr 5, 2011 12:49 PM

Hi,
When you have configured all the tasks in DAC, while running the loads DAC will generate the parameter files at runtime.
You need to make sure that parameterfileDW.txt and parameterfileOLTP.txt files are present in DAC Installation Directory\bifoundation\DAC\Informatica\Parameter\Input folder.
If these files are not present in the above mentioned location then you need to copy them from Informatica Installation Directory\PowerCenter 8.6.1\server\Infa_Shared\SrcFiles folder.
Hope this helps...................
Thanks,
Navin Kumar Bolla

DAC Source System Parameters

Hi,
Could anyone tell me please what parameter I have to set if I want to do an initial load stating with a given date (eg. 1/1/2009)?
I configured $$INITIAL_EXTRACT_DATE, but I noticed a different date for fact tables.
Which is the meaning of the following parameters (in DAC doc are not so well explained):
$$ANALYSIS_END
$$ANALYSIS_END_WID
$$ANALYSIS_START
$$ANALYSIS_START_WID
$$INITIAL_EXTRACT_DATE
$$LAST_EXTRACT_DATE
$$CURRENT_DATE
$$CURRENT_DATE_WID
Thanks,
I.

Hey,
Do not worry as these parameters are for a host of different source systems ..
Initial Extract date is the one used for setting up the extract date for the full load be it dimensions or fact !!
HTH !!

Source System contains Surrogate keys

How to design dimension and facts when my source system table itself contains surrogate key (i mean auto generated id).......
for example:
EMP
id PK
name
salary
designation
id is autogenerated sequence....... my dimension will contain this id as surrogate key but no natural key ...is it right?
if it is right then i cannot create key map table for my dimension

If the source system is generating and maintaining it then it seems like it can be a natural key in your dimension.

Copy Source System Parameters from 1 container to another DAC 10

Hi ALL
I want to copy the records in the tab source system parameters from 1 container to another, i only want the source system parameters, anybod have any idea, I was thinking of copying them directly in SQL, was not sure where though, Thanks

Go to your custom container at Source system parameters tab
right click->Reference->Select the container->add required one
If helps pls mark as correct/helpful
BTW: for DAC experts send me an email
Edited by: Srini VEERAVALLI on Dec 19, 2012 4:40 PM

Error message from the source system, Caller 09 contains an error message.

Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....

Caller 09 is a very common issue - please search the forums before posting....
Arun

How DAC decodes its Source System Parameters into Informatica mappings??

Hi All,
I would like to know about "How DAC decodes its Source System Parameters into Informatica mappings??".
Is it an informatica mapping? or through a file? or its internal to DAC server?
Can we say the DAC server to decode it differently i.e. can we costomize the decode process? For example
$$START_DATE - i gave "Custom Format(1950-05-21 01.23.56) @MM/DD/YYYY" at dac - and it decodes as '05/21/1950' but I want it to decode as TO_DATE('05/21/1950','MM/DD/YYYY') is this possible?
Note that the informatica mapping takes the first decoding '05/21/1950' as number and through a sql error.....
Thanks for your time......
DK

Please set the values of $$FILTER_BY_SET_OF_BOOKS_ID, $$SET_OF_BOOKS_ID_LIST in DAC and check if the values get reflected in the parameter files that DAC generates for informatica at run time.
If this does'nt work, see if the BI services were restarted after doing change in the parameter file. The services need to be restarted in order to reflect the change.

Corresponding table in the source system does not contain any data -URGENT

Hi Guru's,
I have already uploaded master data.
I have created infosource added infoObjects to it and activated it to create communication strucure.
M using RSA1OLD transaction.
and assigned datasource to infosource ie source system name and clicked ok.
save datasource to infosurce assigned msg displayed, clicked ok.
transfer rules r created, i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv
in datatargets tab selected data target as infocube. n then in schedule tab start data load immediately and clicked ok.
everything is fine upto schedule n in monitor it does not display any data.
what will be the problem??

i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv ??
Are you loading the data from flat file or R3? If you are loading it from R3, why are you giving the Flat file name?
In this case, check in RSA3 (R3 side), whther the datas source is getting the value.
In case you are loading a flat file, you need to create a flat file data source and assign to the infosource.
Thanks..
Shambhu

Job terminated in source system -- Request set to red

Hi Developers and supporters can you any one help me.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
Date        Time      Message
13.10.2010 16:48:01 Job started
13.10.2010 16:48:01 Step 001 started (program SBIE0001, variant &0000000024579, user ID RFCUSR)
13.10.2010 16:48:01 DATASOURCE = 0ACTIVITY_ATTR
13.10.2010 16:48:01 *************************************************************************
13.10.2010 16:48:01 *          Current Values for Selected Profile Parameters               *
13.10.2010 16:48:01 *************************************************************************
13.10.2010 16:48:01 * abap/heap_area_nondia......... 2000683008                              *
13.10.2010 16:48:01 * abap/heap_area_total.......... 2000683008                              *
13.10.2010 16:48:01 * abap/heaplimit................ 40894464                                *
13.10.2010 16:48:01 * zcsa/installed_languages...... 6EDGIJL                                 *
13.10.2010 16:48:01 * zcsa/system_language.......... E                                       *
13.10.2010 16:48:01 * ztta/max_memreq_MB............ 256                                     *
13.10.2010 16:48:01 * ztta/roll_area................ 6500352                                 *
13.10.2010 16:48:01 * ztta/roll_extension........... 2000683008                              *
13.10.2010 16:48:01 *************************************************************************
13.10.2010 17:57:09 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
13.10.2010 17:57:09 Job cancelled

Hi SUSUSU,
The dump is related to temp table space issue.check the space for PSATEMP table.
Use tcode DB02 to check the table spaces, in the tree diaplayed on you left. try to see the % used for your ODS & FACT tablespaces. Incase the % are too high like 99% etc, get in touch with you BASIS team.
Request your basis team to increase the PSATEMP table space.
Or
Decrease the data packet size and run the info package.
to decreae the packet size -- in the IP screen menu --> schedular -->Datasource setting for sending data --> there change the parameter Maximum size of a data packet in kByte.
down you can find the area to enter the data packet size .
for ex if it is 20000 decrease it to 10000 and run the info package

Job terminated in source system -- Request set to red,SAPSQL_SQLS_INVALID_

Hi All,
can any one help on this issue.
I run the BI statistics in production and found out the error while triggering the delta's
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Error msg : Job terminated in source system --> Request set to red
Message no. RSM078
Job started
Step 001 started (program SBIE0001, variant &0000000000756, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0TCT_DSA1
RLOGSYS = BCLNT300
REQUNR = REQU_D4GZHNLA3PSQ7XRNGL0EMV6AP
UPDMODE = D
LANGUAGES = *
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 0 *
abap/heap_area_total.......... 2147483648 *
abap/heaplimit................ 40894464 *
zcsa/installed_languages...... ED *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 3000320 *
ztta/roll_extension........... 2000683008 *
ABAP/4 processor: SAPSQL_SQLS_INVALID_CURSOR
Job cancelled
But delta laoding for same is working in DEV...but not in prod...
Please suggest
Regards
Shweta

Swetha
finally found out the notes.
Please look into them and ask you basis to implemnt,
1161940
1106569
1145041
1146851
Please have a look and ask for implemtation in your system which are suitable for you
We also faced the same issue job termination in source system for BI Statistics
Regards#
Srini

Multiple rows in BI Infocube/or DSO for one row in source system

Hi Gurus,
I have a typical scenario where in I have a ztable in R/3 system and it contains some custome transaction data.
The business scenario wants it to split into multiple records in BI ( ofcourse keys for each records in BI would be unique). Either infocube or DSO can be used to store the data in BI.
Is it possible to do that. As far as my knowledge goes( I have limited BI exposure) one record from source system ( read row) is transformed into one record ( row) in BI in simple transformation.
Please give me some rough idea if its possible how can we achieve it.
I know we can write an ABAP program and create a ztable to do it and use the ztable as source for incube/dso. But I want to use this as last option.
Thanks
Sumit

Hi,
An ODS will be better.
Use a start routine.
data-package --> package2
create your own package with your rules.
update.insert.modify.append....
package2 --> data_package
and from 1 row, you create n row as your rules would like..
Regards,

Error message from the source system

Hi,
I'm trying to load 0SD_O03 & 0SD_C03 using fullupload.
I have data in source system which I checked in RSA3.
I deleted the init request from the Infopackage.
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Please help!
Thanks,
Vish

I see a shortdump in BW system with runtime error
MESSAGE_TYPE_X
The current application program detected a situation which
should not occur. Therefore, a termination with a short du
triggered on purpose by the key word MESSAGE (type X).
Hi A.H.P,
It didn't happen to other extractions. I just started with this one. I set up the table in SAP R/3 system and when I tried to do the initial full load in SAP BW, it comes up with the above error.
Thanks,
Vish

Error message from source system

Hi All,
We have an infocube and ods which is being loaded from another ods. This is included in a process chain.
In the process chain the Infopackage execution step has failed. When I right click and go for display messages, I found the following message in Messages tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the
And in Indiv Messages tab,
Delta upload is only possible after successful initialization.
Errors in source system.
I tried to update the data targets from the initial ODS manualy but in vain.
Any Help is awarded with points.
Thanks
AP

Hi,
Goto Info pack -> on menu bar select scheduler -> select init options for source system -> one request with green status -> select it and click on delete symbol , it will delete the init. you can cross verify this in the base ODS where you dint find data mart status(after refresh). now select init delta process under that select init without data transfer and schedule the load it will update one record and init flag to your source ODS.
Note: if the last request is not updated from soruce ods to targets for that also you will find data mart status for this select the particular data mart -> click on delete symbol it will delete for the particular request (if it is updated to target it will not allow you to delete) then do delta load it will update the request which is not loaded from source ods to next targets.
Regards
Sankar

DAC Source System Container

Similar Messages

Maybe you are looking for