DAC source system parameters not being generated

HI all,
We are implementing BI apps 7962 with Informatica 861 Hot FX11, OBIEE 101341 on Linux5. We have installed and set up the configuration completely. The Informatica services are created and the DAC was configured with the Source System Parameters. When I generated the execution plan parameters, the files are being generated in the SRC files folder. But it seems like the source system parameters I set in the DAC client are not being picked up.
For example I have set the Initial Extract date as 1/1/2008. But when I ran the load and saw the log files it still seems like the Initial Extract date is 1/1/1970. We have set the custom property for Integration Service overrideMpltVarWithMapVar as Yes. Please help me if any one has seen this before.
Thanks
MN
Edited by: MNRK on Apr 5, 2011 12:49 PM

Hi,
When you have configured all the tasks in DAC, while running the loads DAC will generate the parameter files at runtime.
You need to make sure that parameterfileDW.txt and parameterfileOLTP.txt files are present in DAC Installation Directory\bifoundation\DAC\Informatica\Parameter\Input folder.
If these files are not present in the above mentioned location then you need to copy them from Informatica Installation Directory\PowerCenter 8.6.1\server\Infa_Shared\SrcFiles folder.
Hope this helps...................
Thanks,
Navin Kumar Bolla

Similar Messages

  • DAC Source System Parameters

    Hi,
    Could anyone tell me please what parameter I have to set if I want to do an initial load stating with a given date (eg. 1/1/2009)?
    I configured $$INITIAL_EXTRACT_DATE, but I noticed a different date for fact tables.
    Which is the meaning of the following parameters (in DAC doc are not so well explained):
    $$ANALYSIS_END
    $$ANALYSIS_END_WID
    $$ANALYSIS_START
    $$ANALYSIS_START_WID
    $$INITIAL_EXTRACT_DATE
    $$LAST_EXTRACT_DATE
    $$CURRENT_DATE
    $$CURRENT_DATE_WID
    Thanks,
    I.

    Hey,
    Do not worry as these parameters are for a host of different source systems ..
    Initial Extract date is the one used for setting up the extract date for the full load be it dimensions or fact !!
    HTH !!

  • How DAC decodes its Source System Parameters into Informatica mappings??

    Hi All,
    I would like to know about "How DAC decodes its Source System Parameters into Informatica mappings??".
    Is it an informatica mapping? or through a file? or its internal to DAC server?
    Can we say the DAC server to decode it differently i.e. can we costomize the decode process? For example
    $$START_DATE - i gave "Custom Format(1950-05-21 01.23.56) @MM/DD/YYYY" at dac - and it decodes as '05/21/1950' but I want it to decode as TO_DATE('05/21/1950','MM/DD/YYYY') is this possible?
    Note that the informatica mapping takes the first decoding '05/21/1950' as number and through a sql error.....
    Thanks for your time......
    DK

    Please set the values of $$FILTER_BY_SET_OF_BOOKS_ID, $$SET_OF_BOOKS_ID_LIST in DAC and check if the values get reflected in the parameter files that DAC generates for informatica at run time.
    If this does'nt work, see if the BI services were restarted after doing change in the parameter file. The services need to be restarted in order to reflect the change.

  • Copy Source System Parameters from 1 container to another DAC 10

    Hi ALL
    I want to copy the records in the tab source system parameters from 1 container to another, i only want the source system parameters, anybod have any idea, I was thinking of copying them directly in SQL, was not sure where though, Thanks

    Go to your custom container at Source system parameters tab
    right click->Reference->Select the container->add required one
    If helps pls mark as correct/helpful
    BTW: for DAC experts send me an email
    Edited by: Srini VEERAVALLI on Dec 19, 2012 4:40 PM

  • Spool file not being generated in production server

    Hello
    Our end users are using automatic payment program F110 to print multiple cheques.
    The settings in SPAD are identical in Quality and Production Server,but some how
    spool file is not being generated in production.
    Test printing is fine in Quality server.
    Printer being used is Epson LQ 300.Device type is EPESCP2.
    We are using z custom page size ,and it is assigned to printer device Type as well
    Would be very great if some can can comment on which settings to check,as SPAD setting is
    same in both server ,yet no spool.Very Very urgent.
    Iam not sure ,whose domain is it now-BASIS or ABAP.
    Thanks a lot
    Nouman

    If there is a problem with the spool, the variant that is being in F110 parameters.
    As you are saying the quality system is working fine, please compare both the variants in Production and Quality systems.
    This should solve your situation.

  • Notifications are not being generated for any emails that have rules applied to them.

    Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

    In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
    that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria.  PLease check
    1) whether your rule has trun on alert supression
    2) Close the alert, craised by rule,  and do it again
    Roger

  • Reports not being Generated

    I use Crystal Reports with another program that supposed to generate 2 reports with a click of a button, but it is not working. The reports are not being generated. I installed Crystal Reports on my system twice and there doesn't seem to be a problem with the installation, but the program is not working. Please help.

    I am fairly new at this so let me try my best to answer these questions:
    Crystal Reports  XI
    Visual Studio? Not sure
    No service pack applied. How and where do i get it?
    I am using Windows XP
    I am not viewing the reports as it has to be generated before i am able to view and the systems does nothing after I click the generate button
    No  have not tried to view a single report; i don't know how.
    I have not used Crystal reports designer for anything else.
    Edited by: Sharon Aird on Dec 1, 2008 5:05 PM

  • Message "Creation of DataSources for SAP source system is not permitted"

    Hi,
    I am in DW Workbench: Modeling and I need to copy a DataSource.
    It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
    What can I do?
    Thks

    Hii.
    You can not copy the standard datasource to any other source system it will not allow you to do that.
    But if you want to copy you can copy it to PC FILE source system.
    It will allow you to copy there.
    Right click in Datasource->Copy-> Give Target datasource name -
    > intarget Source system tab -
    >Give Source system for File.
    Thanks
    Mayank
    Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

  • Multiple usage of Source System is not possible with installed DMIS version on source

    Hello folks!
    I`ve got a problem trying to adjust the Data Replication to SAP BW (on HANA) using SAP LT Replication Server.
    I`ve deleted one connection and after that I`m trying to create new one through  Configuration & Monitoring Dashboard (transaction LTR) with the same source / target systems.
    As result when on the second step (Specify Source System) I specify RFC destination of the source system it appears an error with text
    "Multiple usage of Source System is not possible with installed DMIS version on source".
    But there`s no any adjusted connection in system now..
    Please, help me to understand  how to fix that problem, I can`t find a solution

    Hi,
    When you say that you 'deleted one connection', did you delete the RFC connection or the SLT Configuration? If it is not a real multiple usage scenario, then deactivate the 'allow multiple usage' flag, else install the correct DMIS version on both SLT and source.
    Thanks
    kris

  • Transporting Process Chain - error  Source system does not exist

    Hi,
    I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
    However, I got the following transport error: Source system does not exist
    =======
    Diagnosis
    Source system  is not known.
    System Response
    The imported data for DataSource  was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
    Procedure
    Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
    You get to maintenance using Tools -> Conversion of the logical system names.
    ============
    I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
    And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
    FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
    Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
    Thanks

    Hi,
    This error is due to the fact that the
    mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
    You need to maintain table RSLOGSYSMAP in each system
    You can find the steps to do it in the attached note 127326:
    o  Maintain table 'RSLOGSYSMAP' in the target BW with view
       'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
       This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
    This source system reference in turn is absolutely necessary to activate the transfer structure.
       Example:
       Source BW with source system AAA.
       Target BW with source system BBB where the source system AAA
       corresponds to the source system BBB.
       Entry in RSLOGSYSMAP in the target BW:
       Original source system: AAA, target source system: BBB.
       Give the DDIC user in the source BW in client 000 the
       authorization profile S_RS_ALL to create BW objects.
    Cheers
    Rajesh

  • Source system restore - Source system does not exist

    Hello friends,
    We have a problem. Now we have a new test system QA2. From BW system source system connection was configured for older test source system QA1.
    We needed to route this source system to new system. I tried with changing RFC of QA1 to QA2 details.
    Now, when i check RSA1 source system Check for QA1, i get this error :
    Port 'A000000103 ' of type 'ALE ' does not exist
    No destination exists to source system QA1
    I can see this source system in RSA1 in BW. However, in WE21 port is not available now.
    Please suggest.
    I do not have to lose transfer rules/PSA tables..etc.
    thanks
    ashish

    I get this when i try to restor connection :
    Source system does not exist
    Message no. RSAR175
    Diagnosis
    You have specified that you want to restore source system QA2. This source system is not known in BI.
    System Response
    The source system is not restored.
    Procedure
    Recreate the source system.
    If the source system should be known to BI, the name of source system QA2 may be incorrect. Rename the source system and try the function again.

  • BPM alert not being generated

    Hi guys,
    I'm having quite a little trouble in doing one thing which has been done for several times but which is giving  me a hard time...
    I've created a bpm process which in an error condition will trigger a simple alert.
    I've tested the process and everything goes allright, except the alert. What is happening? Well, the alert is not being sent to my inbox. Why? Maybe because the alert is not being generated.
    I've went to sxmb_moni_bpe and everything is OK. I can see the message of the alert being fired. After that I went to slg1 to see if my alert is being generated, and the answer is no. It's not being generated....
    I've gone through Michal's blogs and everything was checked...The question is, if I execute RSALERTTEST with my alert category, the alert is generated and send to my inbox. Do you have any ideas?
    Thanks a lot for your attention

    Hi,
    Yes the job scheduling is needed only for Sp14 and below.
    Can you recheck if the Alert is actually getting triggered or not in the BPM in the control step? Make sure that you have given the correct Alert Category in your Control Step and also, make sure that the recipient in your alert as well as the Alert Inbox entry you are seeing is the same.
    Finally, refresh the Alert Inbox.
    Regards,
    Bhavesh

  • Transport Request got failed due to Source system does not Exist

    Dear All,
    I Have collected All data soruces which are related to R3 data sources and Flat File data sources...
    After import the transport request it got failed due to Flata file source system does not exist in BI quality system.
    But all data sources related to R3 and R3 Source system has been moved which are available in BI Quality sytem also.
    why Flat File source and data source are moving.. why i am not sure it was throuing error message called Source System does not exist..
    Thanks,
    Ven

    Dear Venkat ,
    Go to Quality system .
    Use RSA1 Transaction --> go to Tools --> Manage Source System :
    Here you can map the entry  of system ..
    Second : go to Development system under RSA1> Transport Connection and click on Source system button first --> select your source system ---you  can select multiple entry also ..collect your data source ( with before and after option ) and deselect which object you do not need ..And select collection mode to automatically ...
    use the transport button to create  transport request and release from development system .
    I hope you will not get error in Q system .
    If still facing error , Please let me know.
    Regards
    Vikas Sharma
    Robert Bosch
    Edited by: Vikas Sharma-Bosch on May 5, 2011 5:34 PM

  • SWF File not being generated by compiler

    I am using Flash Builder 4.5.
    One of the modules that compiles without error is still not being bound into the runtime image (in this case debug).
    There are no compiler errors (auto build is switched ON) but a swf file is not being generated.
    I have tried removing the reference to the module in the Project ->Properties->Modules window and then adding it back in to no avail.
    This was working up until I made a change to the module in question and then saved it.

    I would check all imported images in the library. If you cannot see the image in your library preview; there is a good chance that there is an issue and it will need to be reimported.

  • TA1 Acknowledgement not being generated.

    Hi All,
    I have a requirement for the Inbound 820 to generate 999 and TA1 Acknowledgement. 999 is fine but TA1 is not being generated. I tried changing the ISA14 element to '1' from '0'(by referring http://docs.oracle.com/cd/E28280_01/user.1111/e10229/app_ta1.htm), but of no use. The ISA of the EDI file is as follows
    (ISA*00* *00* *30*905454545 *30*805454545 *130315*0758*^*00501*100000174*1*T*\~). I am using B2B 11.1.1.6.
    Please help me out with some suggestions.
    Thanks in Advance!!
    Edited by: soa999 on Apr 15, 2013 4:17 PM

    I am using B2B 11.1.1.6.TA1 Ack feature has been introduced in PS6 (11.1.1.7). So please use PS6 (11.1.1.7) to get benefit of this feature. If you cannot use PS6 then raise a SR with support to check if you can get a patch on top of PS5 (11.1.1.6) to use this feature.
    Regards,
    Anuj

Maybe you are looking for