Dac task error

Hi Gurus,
i unable to get primary source and primary target in task option. how will i confugure that
thanks

HI Chin,
If u created containers and Table in the Metadata in dac, then check out did u created environment variable in ur local system,
Thanks
Ranga

Similar Messages

Siebel DAC task error

Dears,
I am getting the error while executing DAC task for "Change Capture for OLTP", the error is "Error creating view: ORA-00955: name is already used by an existing object", here is the log, please help.. thanks very much!
# of prune days: 45
Capturing data modified after: 2009-05-27 16:07:51.0 in Incremental Mode.
2009-07-11 16:26:32.337 - Executing :
DBMS_STATS.GATHER_TABLE_STATS(ownname => 'e2466c', tabname => 'S_ETL_R_IMG_C4', estimate_percent => 30, method_opt => 'FOR ALL COLUMNS SIZE AUTO',cascade => true )
2009-07-11 16:26:32.446 - Executed Successfully.
after 1 attempts
2009-07-11 16:26:32.446 - Executing :
DBMS_STATS.GATHER_TABLE_STATS(ownname => 'e2466c', tabname => 'S_ETL_D_IMG_C4', estimate_percent => 30, method_opt => 'FOR ALL COLUMNS SIZE AUTO',cascade => true )
2009-07-11 16:26:32.462 - Executed Successfully.
after 1 attempts
2009-07-11 16:26:32.462 - Executing :
TRUNCATE TABLE S_ETL_I_IMG_C4
2009-07-11 16:26:32.508 - Executed Successfully.
2009-07-11 16:26:32.508 - Executing :
INSERT /*+APPEND*/ INTO S_ETL_I_IMG_C4
(ROW_ID, MODIFICATION_NUM, OPERATION, LAST_UPD)
SELECT
ROW_ID
,MODIFICATION_NUM
,'I'
,LAST_UPD
FROM
s_employee
WHERE
s_employee.LAST_UPD > TO_DATE('2009-05-27 04:07:51', 'YYYY-MM-DD HH:MI:SS')
AND NOT EXISTS
SELECT
ROW_ID
,MODIFICATION_NUM
,'I'
,LAST_UPD
FROM
S_ETL_R_IMG_C4
WHERE
S_ETL_R_IMG_C4.ROW_ID = s_employee.ROW_ID
AND S_ETL_R_IMG_C4.MODIFICATION_NUM = s_employee.MODIFICATION_NUM
AND S_ETL_R_IMG_C4.LAST_UPD = s_employee.LAST_UPD
2009-07-11 16:26:32.524 - Executed Successfully.
2009-07-11 16:26:32.524 - Executing :
INSERT /*+APPEND*/ INTO S_ETL_I_IMG_C4
(ROW_ID, MODIFICATION_NUM, OPERATION, LAST_UPD)
SELECT
ROW_ID
,MODIFICATION_NUM
,'D'
,LAST_UPD
FROM
S_ETL_D_IMG_C4
WHERE NOT EXISTS
SELECT
'X'
FROM
S_ETL_I_IMG_C4
WHERE
S_ETL_I_IMG_C4.ROW_ID = S_ETL_D_IMG_C4.ROW_ID
2009-07-11 16:26:32.524 - Executed Successfully.
2009-07-11 16:26:32.524 - Executing :
DBMS_STATS.GATHER_TABLE_STATS(ownname => 'e2466c', tabname => 'S_ETL_I_IMG_C4', estimate_percent => 30, method_opt => 'FOR ALL COLUMNS SIZE AUTO',cascade => true )
2009-07-11 16:26:32.633 - Executed Successfully.
after 1 attempts
2009-07-11 16:26:32.633 - Executing removing rowid duplicates.
2009-07-11 16:26:32.633 - Executed successfully removing rowid duplicates.
2009-07-11 16:26:32.633 - Executing :
DROP VIEW V_employee
2009-07-11 16:26:32.633 - Executed Successfully.
2009-07-11 16:26:32.649 - Executing :
CREATE VIEW V_employee AS
SELECT
FROM
S_EMPLOYEE,
S_ETL_I_IMG_C4
WHERE
S_EMPLOYEE.ROW_ID = S_ETL_I_IMG_C4.ROW_ID
2009-07-11 16:26:32.649 - ERROR: While executing :
CREATE VIEW V_employee AS
SELECT
S_EMPLOYEE.ROW_ID
,S_EMPLOYEE.MODIFICATION_NUM
,S_EMPLOYEE.LAST_UPD
,S_EMPLOYEE.EMP_NUM
,S_EMPLOYEE.EMP_NAME
FROM
S_EMPLOYEE,
S_ETL_I_IMG_C4
WHERE
S_EMPLOYEE.ROW_ID = S_ETL_I_IMG_C4.ROW_ID
ORA-00955: name is already used by an existing object
Error creating view: ORA-00955: name is already used by an existing object
Will try again!
2009-07-11 16:26:32.665 - ERROR: While executing :
CREATE VIEW V_employee AS
SELECT
S_EMPLOYEE.ROW_ID
,S_EMPLOYEE.MODIFICATION_NUM
,S_EMPLOYEE.LAST_UPD
,S_EMPLOYEE.EMP_NUM
,S_EMPLOYEE.EMP_NAME
FROM
S_EMPLOYEE,
S_ETL_I_IMG_C4
WHERE
S_EMPLOYEE.ROW_ID = S_ETL_I_IMG_C4.ROW_ID
ORA-00955: name is already used by an existing object
Error creating view: ORA-00955: name is already used by an existing object
Will try again!
2009-07-11 16:26:32.665 - ERROR: While executing :
CREATE VIEW V_employee AS
SELECT
S_EMPLOYEE.ROW_ID
,S_EMPLOYEE.MODIFICATION_NUM
,S_EMPLOYEE.LAST_UPD
,S_EMPLOYEE.EMP_NUM
,S_EMPLOYEE.EMP_NAME
FROM
S_EMPLOYEE,
S_ETL_I_IMG_C4
WHERE
S_EMPLOYEE.ROW_ID = S_ETL_I_IMG_C4.ROW_ID
ORA-00955: name is already used by an existing object
Error creating view: ORA-00955: name is already used by an existing object
Will try again!
2009-07-11 16:26:32.68 - ERROR: While executing :
CREATE VIEW V_employee AS
SELECT
S_EMPLOYEE.ROW_ID
,S_EMPLOYEE.MODIFICATION_NUM
,S_EMPLOYEE.LAST_UPD
,S_EMPLOYEE.EMP_NUM
,S_EMPLOYEE.EMP_NAME
FROM
S_EM

HI Chin,
If u created containers and Table in the Metadata in dac, then check out did u created environment variable in ur local system,
Thanks
Ranga

Need some help in Synchronising a DAC task

Hi There,
I am a new bee to DAC. Just worked on few tasks.
I created a dac task, while synchronising I got the below error:
MESSAGE:::Error while inserting a record!
EXCEPTION CLASS::: com.siebel.etl.gui.core.RecordManipulationException
com.siebel.analytics.etl.client.core.DACMessage.convertToRME(DACMessage.java:31)
com.siebel.analytics.etl.client.data.model.UpdatableDataTableModel.upsertNewRecord(UpdatableDataTableModel.java:141)
com.siebel.analytics.etl.infa.fileParsing.InfaDacWriter.insertTableList(InfaDacWriter.java:534)
com.siebel.analytics.etl.infa.fileParsing.InfaDacWriter.insertNodeTables(InfaDacWriter.java:407)
com.siebel.analytics.etl.infa.fileParsing.InfaDacWriter.insertNodeTables(InfaDacWriter.java:318)
com.siebel.analytics.etl.infa.fileParsing.TaskSync.sync(TaskSync.java:171)
com.siebel.analytics.etl.client.action.TaskSynchronizationAction.doOperation(TaskSynchronizationAction.java:144)
com.siebel.etl.gui.view.dialogs.WaitDialog.doOperation(WaitDialog.java:53)
com.siebel.etl.gui.view.dialogs.WaitDialog$WorkerThread.run(WaitDialog.java:85)
Can anybody share your ideas on this issue?
Thanks,
Raghu

restart dac server and then try syncronize. it should work.

Task error report

Is there a way to generate a report of task errors? I have a "Load from Resource" task that generated errors but I don't want to go through each of the 7000+ pages to find the ~230 errors.
I have tried to create a new Task Report but it won't Save or Run.

You might want to find the task and add a custom audit event on the task. If it's a default task you might be able to find it using audit log report.

File system task error ; Access to the path " " is denied

HI All,
I have created a simple package to copy xml files from multiple source folders to destination folder.
Folder names and paths are stored in a sql table. I use execute sql taks to get folder and path names. set the restult set to full result set in the execute sql task.
Then for each loop is used to loop through each file name. File system taks is inside the for each loop. Destination vairable and source varable were created and assigned them inthe file system task.
But I am getting an error message.
[File System Task] Error: An error occurred with the following error message: "Access to the path '\\cor\Groups\DN\Share2\Servicing \RESPONSE_FILES\Services' is denied.".
But I am able to do this if i design the package to move just one file. i.e without using variables. I get the error message only when I use variables.
Can anyone tell me how to fix this please?
Thanks
shamen

How to give the access please.
Ramu Gade
Login using a sysadmin account
Go to the folder right click security and you've the option to add new account. You should give account write access if you want to copy files to folder.
see
http://technet.microsoft.com/en-in/library/bb456988.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Failed to load Execute Package Task error.

Hello Experts,
Excuse my newbie question.
Execute Package Task: Error: The task has failed to load. The contact information for the task is "Microsoft Corporation; Microsoft SQL Server; Microsoft corporation; All Rights Reserved http://www.microsoft.com/sql/support/default.asp:1"
We have a windows service running on our app server that deploys a package that executes other packages using execute package task. This package and rest of the packages are in the same folder at the same level under integration services
catalog. The package fails to execute with the above said error.
Execute package task is configured to run in 'in-process' mode. Changing delay validation to true/false in child packages didn't help.
ironically if the package is deployed using a console application from the app server the package gets executed just fine. I checked permissions, everything seem fine.
Is there anyway to get details of this error to understand the problem better? I am looking at reports > standard reports > all executions.
Thanks.

As it turns out, the 63bit ExecPackageTask.dll was not found under "C:\Program Files\Microsoft SQL Server\110\DTS\Binn". Installing "SQL Server Data Tools" installed only 32 bit version of the component under "C:\Program Files (x86)\Microsoft SQL
Server\110\DTS\Binn".
Is there a way to get 64bit version of this component without installing "Integration Services" (to avoid possible license issues)?
Hi Jayakarthiks,
To make use of the 64-bit ExecPackageTask.dll, you also need the 64-bit SSIS runtime and 64-bit DTExec utility tool. To obtain the 64-bit SSIS runtime and tools, you have to install the SQL Server Integration Services service from your SQL Server 2012 install
media.
Reference:
http://msdn.microsoft.com/en-us/library/ms143731.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
            string[] filenames;
            filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
            Array.Sort(filenames);
            Dts.Variables["filelist"].Value = filenames;
            Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzaki

there may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/

Web Service Task Error

Hi, After successfully testing connection to my source web service, while executing my web service task, I face the following error. Can anyone help me????
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not load the proxy for the specified Web service. The error is: Could not load file or assembly
'iiglotg3.dll' or one of its dependencies. Access is denied..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.loadProxyInAppDomain()
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
Regards,
Njdeh Tahmasian

Could not load file or assembly 'iiglotg3.dll' or one of its dependencies.
Access is denied..
Looks like a permission issue or maybe the assembly don't exists on the server where the package is running; you should check that first.
Olaf Helper
[ Blog] [ Xing] [ MVP]

[Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRaj

To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha

Execute SQL Task Error

I am using the following query in Execute SQL Task
SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '') WHEN 0 THEN (SELECT CONVERT(VARCHAR(8), GETDATE(), 112) AS [YYYYMMDD])
ELSE
(SELECT TOP 1 [BILLING DATE] FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '')
END
In parameter Mapping i have created two parameters and in result set i choose my variable.
Result set property is Single Row.
Following is the error message i received,
[Execute SQL Task] Error: Executing the query "SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETA..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems
with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Sarvan

I cant see where you've named resultset. try like below to make sure resultset has the name used in resultset tab
SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '') WHEN 0 THEN (SELECT CONVERT(VARCHAR(8), GETDATE(), 112))
ELSE
(SELECT TOP 1 [BILLING DATE] FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '')
END AS [Billing Date]
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SSIS - Using Variables in Execute SQL Task Error

The following query in my Execute SQL Task throws the following error when run - [Execute SQL Task] Error: Executing the query "SELECT @columnz = COALESCE(@columnz + ',[' + times..." failed with the following error:
"Must declare the scalar variable "@columnz".". Possible failure reasons: Problems with the query,
"ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Query:
drop table tmpNCPCNCDownstreamMaxUtilization3wks
select node, max(utilization) as max_Utilization, DATE
into tmpNCPCNCDownstreamMaxUtilization3wks
from stage_ncpcncdownstream_temporal
WHERE Date BETWEEN DATEADD(day, -20, GETDATE()) AND GETDATE()
group by node, date
order by node
go
alter table tmpNCPCNCDownstreamMaxUtilization3wks add Timestamp varchar(50)
go
update tmpNCPCNCDownstreamMaxUtilization3wks
set Timestamp = 'WeekOf_' + cast(left(Date, 11) as varchar)
go
--drop table tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--go
declare @columnz varchar (8000)
go
SELECT @columnz = COALESCE(@columnz + ',[' + timestamp + ']','[' + timestamp+ ']')
FROM tmpNCPCNCDownstreamMaxUtilization3wks group by timestamp order by timestamp
go
--pivot contents in @columns
declare @query varchar(8000)
SET @query ='select * into tmpNCPCNC_DownstreamNodeUtilizationMaxPivot from
(select node, timestamp, Max_Utilization from tmpNCPCNCDownstreamMaxUtilization3wks)a
pivot
sum(max_Utilization) for timestamp in('+ @columnz +')
)as p'
execute (@query)
--empty contents from NCPCNCDownstreamMaxUtilization3wks
update tmpNCPCNCDownstreamMaxUtilization3wks
set timestamp =''
truncate table tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
--load to table to be joined to Node feature class
insert into tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
(Node, TwoWeeksAgo, PreviousWeek, CurrentWeek)
select * from tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--calculate average utilization for all values in each record
update tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
set average = (coalesce(twoweeksago, 0) + coalesce(previousweek, 0) + coalesce(currentweek, 0))/3
from tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
Scott

Issue is with variable @columnz.
Scope of variables is only limited to the batch and if batch is over Variable is no more accessible.
Reproduce Steps:
DECLARE @columnz int = 0
Go --Scope of @columnz ends here
SELECT @columnz -- Ends up with error
So you have to remove GO keyword. I have commented 2 of them in below:
DROP TABLE tmpNCPCNCDownstreamMaxUtilization3wks
SELECT node
,max(utilization) AS max_Utilization
,DATE
INTO tmpNCPCNCDownstreamMaxUtilization3wks
FROM stage_ncpcncdownstream_temporal
WHERE DATE BETWEEN DATEADD(day, - 20, GETDATE())
AND GETDATE()
GROUP BY node
,DATE
ORDER BY node
GO
ALTER TABLE tmpNCPCNCDownstreamMaxUtilization3wks ADD TIMESTAMP VARCHAR(50)
GO
UPDATE tmpNCPCNCDownstreamMaxUtilization3wks
SET TIMESTAMP = 'WeekOf_' + cast(left(DATE, 11) AS VARCHAR)
GO
--drop table tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--go
DECLARE @columnz VARCHAR(8000)
--GO
SELECT @columnz = COALESCE(@columnz + ',[' + TIMESTAMP + ']', '[' + TIMESTAMP + ']')
FROM tmpNCPCNCDownstreamMaxUtilization3wks
GROUP BY TIMESTAMP
ORDER BY TIMESTAMP
--GO
--pivot contents in @columns
DECLARE @query VARCHAR(8000)
SET @query = 'select * into tmpNCPCNC_DownstreamNodeUtilizationMaxPivot from
(select node, timestamp, Max_Utilization from tmpNCPCNCDownstreamMaxUtilization3wks)a
pivot
sum(max_Utilization) for timestamp in(' + @columnz + ')
)as p'
EXECUTE (@query)
--empty contents from NCPCNCDownstreamMaxUtilization3wks
UPDATE tmpNCPCNCDownstreamMaxUtilization3wks
SET TIMESTAMP = ''
TRUNCATE TABLE tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
--load to table to be joined to Node feature class
INSERT INTO tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week (
Node
,TwoWeeksAgo
,PreviousWeek
,CurrentWeek
SELECT *
FROM tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--calculate average utilization for all values in each record
UPDATE tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
SET average = (coalesce(twoweeksago, 0) + coalesce(previousweek, 0) + coalesce(currentweek, 0)) / 3
FROM tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
-Vaibhav Chaudhari

Execute SQl Task Error SSIS Package

Hi all,
I`m using for each loop container in my package to grab the file name from the source path. I have created 2 vairables
FilePath and SourceFolder
I`m using execute sql task inside the container and this is my query
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) SELECT File_name = ?,
File_Date = GetDate()
Please not the Table I am trying to insert has more columns but at this stage I dont need them.
When i execute the task I get an error
[Execute SQL Task] Error: Executing the query "
INSERT INTO [dbo].[DCA_FF_TEST] ([File_Name],[F..." failed with the following error: "The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters
not set correctly, or connection not established correctly.
Can someone point me in the right direction? Am I missing anything?
Resultset property Set to None
Parameter Mapping: Variablename: FilePath , Direction: Input, datatype : Varchar, Parametername: 0, ParameterSize: 100.
I`ve checked the connection as well it works.
FM

Did you try
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date)
SELECT ?, GetDate()
Or
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) VALUES (?, GetDate())
A Fan of SSIS, SSRS and SSAS

Web service task: Error when returning an empty array

Hi,
I've encountered an annoying error when using a Web Service Task from an SSIS package in SQL Server Data Tools.
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Index was outside the bounds of the array..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
It seems that the Web Service Task generates this error when returning an empty response from the WSDL. I've seen several topics about this here on MSDN but they are all from 2008-2009 and seem to suggest that
this is a bug. The workaround suggested is using a script task but I would really love to avoid that since my programming skills are lacking.
I'm using Visual studio 2010 with SP1.

Hello,
From my own experience: in all the cases where I had to use SSIS 2008 to retrieve data or send data to Webservices, I had to revert to using Script Tasks or Script components. Whenever I tried with a Web service task, because the job looked simple, I had
to abandon it in favour of Scripts. Keep in mind that I try to make use of the SSIS components as often as possible, before reverting to Scripting. But handling web services is the one exception, where I always use scripts. In SSIS 2012 I did not find
any significant improvement of the Web service task and hence no compelling reason to use it.
Jan D'Hondt - SQL server BI development

SSIS execute process task error on unziping

Hi
I am using 7zip to unzip files in SSIS using execute process task. Here is the configuration of the task:
executable: C:\Program Files\7-Zip\7z.exe
arguments: e default-o\\servername\livechat\unzip\
However, on executing package in BIDS, following error is thrown
[Execute Process Task] Error: In Executing "C:\Program Files\7-Zip\7z.exe" "e \\servername\livechat\7566_20121009.zip-o\\servername\livechat\unzip\" at "", The process exit code was "2" while the expected was "0".
Can someone help where I made mistake?
Thanks,
hsbal

I have mapped the share to F: and then tested. Unfortunately that doesnt work as well.
I am getting the following error:
[Execute Process Task] Error: In Executing "C:\Program Files\7-Zip\7z.exe" " F:\*.zip -o F:\unzip" at "", The process exit code was "7" while the expected was "0".
Thanks,
hsbal
Seems like a syntax error. Go through this
http://www.dotnetperls.com/7-zip-examples
Rajkumar

Ssis execute process task error: process exit code was 1 while the expected was 0

Hi Sir,
in my SSIS Package(2012) i am using Execute Process Task which will call bat file. bat file is located on UNC Path.i am having the below script in the batch file.
del \\servername\foldername\name.txt
rcmd \\servername D:\name1.bat
del \\servername\foldername\name2.txt
xcopy \\servername\foldername\file.txt \\server\foldername\outfilefolder
i am getting the below error message:
ssis execute process task error: process exit code was 1 while the expected was 0
i want know at what cases error exit code was 1?
Thanks for your time.

Hi prasad.alm,
The error is generic and can be caused by various factors. Here are some suggestions for your reference:
Manually run the executable to execute the batch file so that we can check whether the command lines in the batch file are correct or not.
Check there are no duplicate/existing files in the destination folder.
Try to run the package in 32-bit or 64-bit runtime mode.
If the issue occurs when running a job, try to create a CmdExec type job step to call the excutable. If this job also fails, it might be an issue between executable and SQL Server Agent rather than the SSIS package itself.
If the issue persists, enable logging for the package, and check if we can obtain more detailed error message for further analysis.
Regards,
Mike Yin
TechNet Community Support

Dac task error

Similar Messages

Maybe you are looking for