DAC to automatically restart a failed job

Hi Gurus,
Is there a way to automatically configure DAC to automatically restart a failed job, instead of manually restart the job in a windows environment.
Thanks
Simmz

Are you looking to restart automatically anytime the DAC task fails?? I would assume you want to resolve what is causing the task to fail before you restart, correct? You can script the DAC to start a EP (as the other user suggested), but restarting a task automatically without fixing what is cauing it will result in continuois failures (unless you change the Session/WF properties to not Fail parent when session fails..which is not recommended). The other option is to mark it complete which, again, is probably not recommended. I am not sure what advatage there is of automating/scripting a restart without knowing how and when the issue will be fixed.

Similar Messages

  • Restart of failed jobs while export of a SAP instance

    Hi,
    I am performing export of a source system for unicode conversion. 8 parallel processes have been configured. 40 jobs completed and 3 jobs failed in export with an error "Unable to extend tempfile".
    Now that tempfile has been added. My questions is how to restart a failed job while the export of SAP instance is in progress?
    Thanks

    If I stop sapinst and restart it, will it cause loss of data? (The 2 jobs failed when 24 job completed. How 200 jobs have already completed)
    Based on the above, I have the following questions.
    1- If I restart sapinst, will it process the 2 failed jobs and the proceed from 201 job, since already 200 have completed.
    2- In sapinst, there is no stop button. Do I have to logoff and restart sapinst -> continue old installation?
    Thanks,
    Haleem

  • Automatic restart at SXMB_MONI

    Hello gurus,
    What exactly happens when any of my messages get to the state "Automatic restart" because of any temporary errors like communication failure? How is the system configured to restart these messages; parameters, background jobs? Is there a default mechanism PI uses without any configuration or do I set up anything for these messages to actually be restarted automatically?
    All input&links will be very much appreciated and rewarded as well. Thank you.
    Regards,
    Gökhan

    Thank you for all your inputs. Actually I had read the blog here:
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    and I got confused. It says:
    Option 1
    IS_Retry A batch job( internal in XI) is automatically scheduled to reprocess the entry after 2 minutes.
    If the maximum number of retries was reached (10 by default; IS configuration parameter
    TUNING IS_RETRY_LIMIT), a communication error then causes a SYSFAIL status for a queue.
    Option 2 The problem with setting IS_RETRY is that every message with a failure status will be retried every 2minitues till the maximum number of retries is reached. Since there is no control on the retry period , a high retry count could cause excessive load on XI. The other option is to do Mass Restart  by scheduling the report RSXMB_RESTART_MESSAGES at a predetermined retry period like 1hr. There is a catch here, RSXMB_RESTART_MESSAGES tries to restart a failed message 800 times by default. So if there is a message that failed due to genuine reasons, we may want to limit the number of retries. It is recommend by SAP to reduce the retry count to 20 restarts. (You can always manually restart a message, from the monitor, up to 990 times).
    What I understand from option 2 is that, RSXMB_RESTART_MESSAGES can be scheduled to mass restart all messages with temporary errors, and although Naveen wrote it also in option 1, IS_RETRY_LIMIT parameter is valid for this program.
    What I don't understand is Option 1. What is IS_Retry he is talking about? Is there any other mechanisms to restart messages other than reports RSXMB_RESTART_MESSAGES, RSQIWKEX and RSARFCEX? "A batch job( internal in XI) is automatically scheduled to reprocess the entry after 2 minutes" - what job is this?
    Thank you,
    Gökhan
    Edited by: S. Gökhan Topçu on Feb 18, 2009 10:12 AM

  • Is there any way to restart Cancled Background job

    Dears,
    Now we have a very important background job need to run everyday, but sometime it will be canceled due to memory is not enough.
    Is there any way to restart Cancled Background job automatically ?
    Thanks,
    Michael

    Hi Michael,
    To start the cancelled job manually
    At SM37 just mark the job then click   Job -> Change and just reschedule.
    For auto
    Create another job with same program name and variant , then create background processing event which gets trigger only when your job gets failed.
    For Event Creation kindly reach out to ABAPers and for Event based Scheduling you can contact basis team.
    BR Vaibhav

  • Automatic Active Sync failed to Start at appropriate time

    Hellos,
    Its holiday season here. We had a FF Active Sync process that failed to start up.
    Ops noted an overheating CPU at 2am. Server was brought down.. App server stopped, Database stopped. Fan fixed and Server rebooted.. Database started Ok, App server started Ok.. according to AS Log idM started up ok... but the 'automatic' Active Sync process refused to start.
    What could prevent it?!
    I have seen various people's opinions.. e.g.
    "Hi,
    There can be lot of reasons , for not starting activesync.
    if you are using activesync between SIM and database ,
    then lets start from activesync wizard ,
    1)check the i/p activesync form(version should be correct)
    2)check the startup type
    3) if you are using query based activesync
    check the first and last predicate fields and you need to ensure that the logic you have used in i/p activesync form will generate some processing once you start active sync otherwise you will not see active sync in executing state.
    you can check weather activesync has performed operation or not in IAPI in the debug page under configurator
    if your CPU utilisation on server is very high activesync will not start
    these are general things
    if you can give some more specific details abt your application and problem i can help you out.
    Warm Regards,
    Gajanan"
    This process had been left unstarted for some time. Noone checked.. why should they.. its automatic (obviously IdM isnt an R.E.M. fan)
    Surely an automatic start type should (re)start after a reboot for hardware reasons!
    Is the only thing we can we put in a Solaris shell script to test that these ****ing active sync process have been started and are running after a reboot/restart of App.server is a date test of the log file? i.e. if log file has not been touched in x days raise an alarm... seems something that is better built into IdM than a script.
    How has this problem been faced and met by others out there? I am sure we are not the only people who have had to shutdown and restart IdM.

    Indeed it does. The problem is that a log is just that.. a log of what has happened. In our case the 'automatic' AS process failed to start automatically.
    We are forced to use the log and reverse apriori reasoning to detect whether the AS process actually started.
    I hope you agree this situation isnt really satisfactory, is it?

  • My iMac running 10.10.2 keeps crashing several times a day. It does a automatic restart and gives me a option to send in a report. Any ideas what might be causing this?

    My iMac does an automatic restart several times a day. It gives me a option to send in a "panic" report. This happens randomly during the day and night. Any idea of anything new that might be causing this? I am up to date on all applications.

    Mac users often ask whether they should install "anti-virus" (AV) software. The usual answer is "no." That answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
    1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions.
    It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to take control of it remotely. That threat is in a different category, and there's no easy way to defend against it. AV software is not intended to, and does not, defend against such attacks.
    The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
    The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    ☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    ☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
    3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't been checked for security by Apple unless it comes from the App Store, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    ☞ It can easily be disabled or overridden by the user.
    ☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
    ☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
    Apple has taken far too long to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. Those lapses don't involve App Store products, however.
    For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, not machine behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
    The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
    Software from an untrustworthy source
    ☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
    ☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
    ☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
    ☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
    Software that is plainly illegal or does something illegal
    ☞ High-priced commercial software such as Photoshop is "cracked" or "free."
    ☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
    Conditional or unsolicited offers from strangers
    ☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    ☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
    ☞ You win a prize in a contest you never entered.
    ☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
    ☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
    ☞ Anything online that you would expect to pay for is "free."
    Unexpected events
    ☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
    ☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
    ☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
    ☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
    I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
    Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
    7. Never install any commercial AV or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
    Why shouldn't you use commercial AV products?
    ☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
    ☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    ☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
    ☞ Most importantly, a false sense of security is dangerous.
    8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
    Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
    London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
    You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
    The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
    10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It can be as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

  • Everytime I try to use the video camera, my ipod automatically restarts???

    Everytime I try to use the video camera, my ipod automatically restarts. I just need to bring the clicker to the Video section on the main menu for it to turn on and off again. I have to scroll over it really fast so it doesn't restart. My dad bought it a few months ago and I just opened it about a week ago. So far, I've synced it once, taken it out out without first ejecting it, and using it on a lamp iHome. Should restoring the ipod do the trick? Is this a common issue with the rest of you?

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Automatically Restart messages stuck in Java Stack.

    Hi,
    1) Is there a way to restart messages in java stack automatically like in ABAP stack.
    2) Alerts are not raised when messages are stuck in Java stack, for the same interface alerts are raised when stuck in ABAP stack any reason for this?
    Thanks in Advance.

    I don't know if you found already the solution for automatic restart of messages but there is a possibilty of an automatic restart.
    you have to open the url: HOST:Port/pimon
    -> Configuration and Administration
    -> Adapter Engine
    -> Background Scheduling
    Here you can create new jobs for restarting messages
    best regards
    Timo Eckhardt
    rz10.de - die SAP Basis und Security Experten - Das Team vom Fachbereich SAP Basis und Security

  • Work Process tries to restart but fails - Operating system call fork:restar

    Hi
      We have a ECC 5.0 system running on v5r4 (6.40 kernel level 159).  Some of the work processes fail and then try to restart and fail again. Thus there are many job log entries in both SAP and OS/400.
    The OS/400 logs mention the PASE (unix executable environment) and MCH3203.
    SAP mentions Operating system call fork:restart
    OSS has note #884359 which mentions a palitative but despite being at 6.40 level 159 the parameter profile as/4/wp_max_restart is said to be "unknown" by RZ10.
    We are making sure we are up to date with the APAR II14126 just in case this is the issue.
    It did start after the time change but we are not sure this is the root cause.
    We are also considering getting upto kernel 171.
    Anyone else seen this issue?
    thanks
    Matthew Milne

    We see those problems once a while, and usually they are gone when you restart the instance or after an IPL. You should report the problem to IBM, they will probably be interested in the LIC log entries that come along with the error (STRSST - Start a Service Tool - Licensed Internal Code Log). II14126 is probably a good start (for example, MF40759).
    The profile parameter as4/wp_max_restart is only known to the kernel, because it is not intended as a permament setting, but only as a temporary workaround for the problem in the PASE environment. That's why RZ11 does not know about the parameter and reports it as unknown.
    Kind regards,
    Christian Bartels.

  • Restarting a failed admin server on another machine with different IP

    Hi,
    I'm trying to restart a failed admin server on another machine with different IP on Weblogic Server 10gR3. After copying the domain config to another server, the admin server can be started without any problem, but it cannot contact the managed server until the managed server is rebooted.
    The behavior contradicts the documentation, http://download.oracle.com/docs/cd/E12840_01/wls/docs103/server_start/failures.html#wp1064112, that says Running MSs will learn the new AS address when they are contacted by the AS after it has been started. It does not mention the managed servers need to be rebooted.
    did I do anything wrong? Your help would be much appreciated.
    Thanks a lot,
    Andreas

    Hi,
    What ever you said is true. If the IP Address of Admin Server is changed, then Managed Server must connect to Admin Server after "ReconnectIntervalSecs" . If the IP address is not moved then Admin Server Should contact Managed Server automatically.
    Can you provide details steps you had performed, so that we can identify the root cause of the issue.
    Thanks.
    Vijay Bheemineni.

  • Automatic restart on ThinkPad software update

    I've got a Vista 64-bit T61. Today there was a list of ThinkPad software updates so I said do them, and watched the progress for a while, but then started working on some other stuff and suddenly the machine restarted and there was nothing I could do about it. I had a bunch of stuff open and could have lost hours of work and this is one of the most annoying things ever. I've worked with computers for decades and never had one suddenly restart on me until Vista (Windows update was also doing this for a while, but I thought I succeeded in turning their automatic restarts off). What caused this automatic restart? Why the hell doesn't it ask me if I want to restart now, like any updating program with the tiniest bit of courtesy would do? (And not do it unless I say yes?) And is there any way to insure that this never happens again?

    Hi, greg.
    The following conditions can result in problems after applying a Software Update:
    • You apply a Software Update to a drive which has a corrupted directory.
    • The Update fails to install completely, or you abort the installation while it is in progress.
    In most cases, this can leave you with a wholly corrupted operating system.
    Here are some steps you can try:
    • I suggest you begin troubleshooting by running the Procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified. At a minimum, perform Steps 1-3.
    • An errant Startup or Login Item maybe the cause. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
    Generally, the only way to recover from a failed Software Update is to reinstall the operating system using the Archive and Install process. See my "General advice on performing an Archive and Install" FAQ.
    Before installing future Software Updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Broken jobs and failed jobs

    hi all..
    please tell me difference between broken jobs and failed jobs
    thanks

    Please refer documentation .
    Failed Jobs
    If a job has the status of FAILED in the job table, it was scheduled to run once but the execution has failed. If the job was specified as restartable, all retries have failed.
    If a job fails in the middle of execution, only the last transaction of that job is rolled back. If your job executes multiple transactions, you need to be careful about setting restartable to TRUE. You can query failed jobs by querying the SCHEDULERJOB_RUN_DETAILS views.
    Broken Jobs
    A broken job is one that has exceeded a certain number of failures. This number is set in max_failures, and can be altered. In the case of a broken job, the entire job is broken, and it will not be run until it has been fixed. For debugging and testing, you can use the RUN_JOB procedure.
    You can query broken jobs by querying the SCHEDULERJOBS and SCHEDULERJOB_LOG views.
    Regards
    Renjith Madhavan

  • Windows automatic restart

    hi there,
    windows automatically restart every 2-5 minutes
    i'm using Win7 ultimate SP1 v6.1.7601(build 7601)
    intel e7300
    event log:
    Warning USER32
    1073
    The attempt by user my-pc\my_user to restart/shutdown computer my-pc failed
    Information Kernel-General
    13
    The operating system is shutting down at system time *******.
    Information ******
    Kernel-Power 109
    (103)
    The kernel power manager has initiated a shutdown transition.
    Information ******
    USER32 1074
    None
    The process C:\Windows\system32\winlogon.exe (****) has initiated the power off of computer *** on behalf of user ** for the following reason: No title for this reason could be found
     Reason Code: 0x500ff
     Shutdown Type: power off
     Comment: 

    Hi hbasjdhba,
    The error ID USER32 1074 is documented in the KB below:
    On a computer running Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2 an incorrect shutdown reason code written to SEL on user initiated shutdown
    The above KB offers a workaround:
    WORKAROUND:
    Use shutdown.exe to initiate the shutdown. E.g. from the elevated command line run:
    shutdown.exe /r /d P:4:2
    This will result in an eventlog and SEL entry with reason code 0x80040002.
    Shutdown reason codes can be found here:   http://msdn.microsoft.com/en-us/library/aa376885(VS.85).aspx
    Please take a try with the above workaround, after that, scan for Windows updates, make sure Windows is always up to date.
    If any further help needed, please feel free to ask.
    Best regards
    Michael Shao
    TechNet Community Support

  • Track & log failed jobs on Report Server 9.0.4

    Hi
    Oracle Reports Services 9.0.4 on Windows
    i'm trying to figure out how to log failed jobs , so i can automate it and send it to developers
    the problem is , how dose showjobs display the job ids with the ohs logs info
    http://localhost:7777/reports/rwservlet/showjobs?
    i can collect the job IDs with the "Terminated with error" from the rwserver.trc
    but how do i connect these jobs with the actual RDF, pdf entries in the apache log
    or maybe logs
    for example , so i can track the failed requests with their respective parameters
    any ideas ?
    thanks

    thanks desgard
    that info is totally great and all , i even found this link that may help others with Notification
    http://www.oracle.com/technology/products/reports/apis/plugNotification/NOT_3.html
    but i don't want to send a msg for each run & i need to alter the URL format to use this feature in the rwservlet
    but that's not what i want , i want to filter the trace log (rwserver.trc) & extract the History of failed jobs for the past month or so
    i can get the list of jobs , example
    "Job 104870 status is: Terminated with error:"
    how can i connect the job IDs with their URL Requests

  • Cronacle failed jobs log

    All, 
    Can someone please direct me to the log that lists the failed jobs in Cronacle?  Are they located in a OS file or in the DB?
    Thanks
    Jonathan

    Hi Jonathan,
    The easiest way to get to this information is via the job monitor, and then pick the filter for error jobs.
    If you use the full version, you can very easily create a report that lists these jobs in HTML, CSV or XML format and for instance automatically send yourself that list every morning.
    Regards,
    Anton.

Maybe you are looking for