DAD Configuration without Protal in iAS EE

Hello,
I have installed 9iAS 1.0.2.2 on WinNT without Portal, because I want to use only mod_plsql and forms/reports_services. But now I don't find a way, to configure my DAD without Portal. In the Standard Edition of iAS (1.0.2.) it is possible.
I4ve configured the files wdbsrv.app and plsql.conf in congi-Path of mod_plsql.
Can anyone give me a tip??
Axel Zerndt

Hi,
You don't require setup DAD to use forms/report services.
All you need to do is call the Forms files using by typing the URL, in the mode you would like to run your Forms. Various modes available are
1. Cgi executable
2.Applet definition
3.FormsListenerServlet.
Write to me if you need further help
Hope this helps
-Srini
null

Similar Messages

Configure HTTP server for iAS

Hi Friends,
In configuring iAS HTTP server which one among the .conf it created is called
"Database Access Descriptor(DAD)"? I am confused with lots of .conf
in the directory $ORACLE_HOME/Apache/ who is the DAD here.
========
/u02/visora/iAS/Apache/Apache/conf/mod__ose.conf
/u02/visora/iAS/Apache/Apache/conf/srm.conf
/u02/visora/iAS/Apache/Apache/conf/access.conf
/u02/visora/iAS/Apache/Apache/conf/httpds.conf
/u02/visora/iAS/Apache/Apache/conf/httpd.conf
/u02/visora/iAS/Apache/Apache/conf/httpd_pls.conf
/u02/visora/iAS/Apache/Apache/conf/oracle_apache.conf
/u02/visora/iAS/Apache/Apache/conf/imeeting.conf
/u02/visora/iAS/Apache/Apache/conf/apps.conf
/u02/visora/iAS/Apache/Apache/conf/security.conf
/u02/visora/iAS/Apache/Apache/conf/trusted.conf
/u02/visora/iAS/Apache/Apache/conf/oprocmgr.conf
/u02/visora/iAS/Apache/Apache/conf/url_fw.conf
/u02/visora/iAS/Apache/modplsql/cfg/plsql_pls.conf
/u02/visora/iAS/Apache/modplsql/cfg/plsql.conf
/u02/visora/iAS/Apache/modplsql/prepatch/cfg/plsql.conf
/u02/visora/iAS/Apache/modplsql/prepatch/cfg/plsql_pls.conf
/u02/visora/iAS/Apache/Jserv/etc/jserv.conf
/u02/visora/iAS/Apache/modimeeting/conf/mod_imeeting.conf
/u02/visora/iAS/Apache/jsp/conf/ojsp.conf
====================
Thanks a lot

Post it on EBS forum General EBS Discussion
--Shiv

DAD Configuration Access

Hi
I want to give access to a user just for dad configuration , is there a way to do that ??
thanks
Walid
null

You can create a user without permission to log in. He will have access to DAD configuration but won't be able to log in to portal.
It it that what you wanted?
best regards
Krzysztof Jungowski

/pls/admin_/gateway.htm - No DAD configuration Found ?

Hi All !
For some reason I messed up my configuration and now I can't retrive the page
http://myhost/pls/admin_/gateway.htm
I realize that the forum may not be for PORTAL configuration but is imperative for me to fix this
issue as I am testing and generating some modules from the Design Editor and they will not come up since the
configuration is not set up properly. I already tried posting this on the PORTAL Forum , but there are no responses.
I get the following error :
No DAD configuration Found
DAD name:
PROCEDURE : gateway.htm
URL : http://myhost/pls/admin_/gateway.htm
PARAMETERS :
===========
ENVIRONMENT:
============
PLSQL_GATEWAY=WebDb
GATEWAY_IVERSION=2
SERVER_SOFTWARE=Apache/1.3.12 (Win32) ApacheJServ/1.1 mod_ssl/2.6.4 OpenSSL/0.9.5a mod_perl/1.22
GATEWAY_INTERFACE=CGI/1.1
SERVER_PORT=80
SERVER_NAME=uroboros-server
REQUEST_METHOD=GET
QUERY_STRING=
PATH_INFO=/admin_/gateway.htm
SCRIPT_NAME=/pls
REMOTE_HOST=
REMOTE_ADDR=63.215.155.114
SERVER_PROTOCOL=HTTP/1.1
REQUEST_PROTOCOL=HTTP
REMOTE_USER=
HTTP_CONTENT_LENGTH=
HTTP_CONTENT_TYPE=
HTTP_USER_AGENT=Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)
HTTP_HOST=uroboros-server
HTTP_ACCEPT=image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*
HTTP_ACCEPT_ENCODING=gzip, deflate
HTTP_ACCEPT_LANGUAGE=en-us
HTTP_ACCEPT_CHARSET=
HTTP_COOKIE=
Authorization=
HTTP_IF_MODIFIED_SINCE=
I am using Portal 309.
Can some one please be nice to me and help me with this issue ?
Thank you in advance.
Chris.

Hi,
It looks like that you don't have the DAD entry in the listener settings.
In the listener folder of your oracle home you can find a file named as wdbsvr.app.
Open this file and check for the DAD entry that you are using.
It should have the valid password and the connect strings too. Just validate this file and restart yourwebdb listener.
Hope this helps you.
Cheers,
Siva.

HTTP-404 No DAD configuration found or no default home page

Hi,
No EBS login page was available this morning but all services appeared to be online as usual. I restarted Apps Tier and could then see login page.
Now I have to find out what happened. There is nothing in the db log file, the listener log, the cc manager logs, the Jserv logs.
The only thing in the Apache log is this:
first error around 4.30am, then next later this morning:
[Wed Aug 26 04:36:55 2009] [warn] mod_plsql: /pls/PROD/OA_HTML/webtools/jslib/cabo_utilities.js HTTP-404 No DAD configuration found or no default home page
[Wed Aug 26 04:36:55 2009] [warn] mod_plsql: /pls/PROD/OA_HTML/webtools/jslib/container_constructor.js HTTP-404 No DAD configuration found or no default home page
[Wed Aug 26 04:36:55 2009] [warn] mod_plsql: /pls/PROD/OA_HTML/webtools/jslib/toolbar_constructor.js HTTP-404 No DAD configuration found or no default home page
then, a little later this morning:
[Wed Aug 26 10:44:36 2009] [warn] mod_plsql: /pls/PROD/OA_HTML/webtools/jslib/container_constructor.js HTTP-404 No DAD configuration found or no default home page
[Wed Aug 26 10:44:36 2009] [warn] mod_plsql: /pls/PROD/OA_HTML/webtools/jslib/toolbar_constructor.js HTTP-404 No DAD configuration found or no default home page
[Wed Aug 26 10:44:36 2009] [warn] mod_plsql: /pls/PROD/OA_HTML/webtools/jslib/button_constructor.js HTTP-404 No DAD configuration found or no default home page
[Wed Aug 26 10:44:36 2009] [warn] mod_plsql: /pls/PROD/OA_HTML/webtools/jslib/cabo_utilities.js HTTP-404 No DAD configuration found or no default home page
Is this the problem or, as I suspect, the symptom of the problem? I am running out of ideas of where to look for any thing that might point to what happened.
OS is WIndows Server 2003. EBS is 11.5.10 and db is 10.2.0.2.
Thanks.
DA
Oh - no clones, no changes have been made recently.
Edited by: Dan A on Aug 26, 2009 10:40 AM

Hi Dan,
The entries in the log files posted above do not help much in finding out the cause of the issue. Does this happen regularly? Can you find any dump files created when this happens? If this happens for few times only, is there any specific action that is done by the users (for example, running specific concurrent program, accessing certain module/form, ..etc) or by the system (like a backup)?
Did you try to find if any errors are logged in the Event Viewer? Since debugging was not enabled at the time this issue occurred, then it is not easy to tell why that happened. Maybe you could log a SR and upload all relevant log files and see if Oracle Support can help.
Regards,
Hussein

ERROR: No DAD configuration Found

Hi
I am converting my servlet into portal. my servlet used form to pass some parameters. When i submit my form i got the forllowing error.
Thanks. Any suggestion will appreciate.
VC
Wed, 08 Aug 2001 00:04:55 GMT
No DAD configuration Found
DAD name:
PROCEDURE : !null.wwpob_page.show
URL : http://ntserver:80/pls/null/!null.wwpob_page.show?_pageid=null
PARAMETERS :
===========
ENVIRONMENT:
============
PLSQL_GATEWAY=WebDb
GATEWAY_IVERSION=2
SERVER_SOFTWARE=Oracle HTTP Server Powered by Apache/1.3.12 (Win32) ApacheJServ/1.1 mod_ssl/2.6.4 OpenSSL/0.9.5a mod_perl/1.24
GATEWAY_INTERFACE=CGI/1.1
SERVER_PORT=80
SERVER_NAME=ntserver
REQUEST_METHOD=POST
QUERY_STRING=_pageid=null
Here is the some part of my code.
private void renderShow(PortletRenderRequest pr)
throws PortletException {
try {
/*HttpServletRequest request = (HttpServletRequest)
pr.getAttribute(HttpProvider.SERVLET_REQUEST);
HttpServletResponse response = (HttpServletResponse)
pr.getAttribute(HttpProvider.SERVLET_RESPONSE); */
PrintWriter out = pr.getWriter();
pr.setContentType("text/html; charset=WINDOWS-1252");
pr.setContentType("text/html");
//PrintWriter out = response.getWriter();
// create and send html form to user
out.println("<html>");
out.println("<body>");
out.println("<title>Age calculation</title>");
out.println("<form method=\"POST\" action=\""+HttpPortletRendererUtil.htmlFormActionLink(pr,PortletRendererUtil.PAGE_LINK) +"\">");
HttpPortletRendererUtil.htmlFormHiddenFields(pr,PortletRendererUtil.PAGE_LINK);
String ageParam = HttpPortletRendererUtil.portletParameter(pr, "ageyear");
String submitParam = HttpPortletRendererUtil.portletParameter(pr, "mySubmit");
out.println("Enter the Year of Birth<input type=\"text\" name=\" + ageParam + \"><br>");
out.println("<input type=\"submit\" name=\" + submitParam + \" value=\"submit\">");
out.println(" </form>");
out.println("</body>");
out.println("</html> ");
if (pr.getParameter(submitParam) != null ) {
out.println("You are "+ calculateAge(pr,out));
} catch (Exception e) {

Vipul,
You may want to take a look at the parameter passing sample in PDK-Java. This is more updated and meant to display the proper way to pass parameters. It also includes an article to make sure that you do it correctly.
You can find this in the PDK at the PDK-Java Samples page.
http://portalstudio.oracle.com/servlet/page?_pageid=414&_dad=ops&_schema=OPSTUDIO
Click on M-R to view the Parameter passing sample. This sample/article explains how to create a parameter passing portlet.
Sue

No DAD configuration Found

Please if somebody can help.
My TNS Listener is running and database us up.Connecting to portal home page is giving me "Proxy log on failed" together with the message "TNS could not resolve service name"
In http://192.168.1.101/pls/portal30/admin_/dadentries.htm i have DAD name portal30 ,username portal30,password portal30 and connect string
192.168.1.101:1521:mydatabase
Checking entries (http://192.168.1.101/pls/bootstrap/admin/dadentries.htm)i got
No DAD configuration Found
DAD name:
PROCEDURE : admin/dadentries.htm
URL : http://my_server:80/pls/bootstrap/admin/dadentries.htm
PARAMETERS :
===========
ENVIRONMENT:
============
PLSQL_GATEWAY=WebDb
GATEWAY_IVERSION=2
SERVER_SOFTWARE=Apache/1.3.12 (Win32) ApacheJServ/1.1 mod_ssl/2.6.4 OpenSSL/0.9.5a mod_perl/1.22
GATEWAY_INTERFACE=CGI/1.1
SERVER_PORT=80
SERVER_NAME=my_server
REQUEST_METHOD=GET
QUERY_STRING=
PATH_INFO=/bootstrap/admin/dadentries.htm
SCRIPT_NAME=/pls
REMOTE_HOST=
REMOTE_ADDR=192.168.1.101
SERVER_PROTOCOL=HTTP/1.1
REQUEST_PROTOCOL=HTTP
REMOTE_USER=
HTTP_CONTENT_LENGTH=
HTTP_CONTENT_TYPE=
HTTP_USER_AGENT=Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)
HTTP_HOST=192.168.1.101
HTTP_ACCEPT=image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*
HTTP_ACCEPT_ENCODING=gzip, deflate
HTTP_ACCEPT_LANGUAGE=en-us
HTTP_ACCEPT_CHARSET=
HTTP_COOKIE=
Authorization=
HTTP_IF_MODIFIED_SINCE=
For god sake please help.I spent enough time on it
How can i chech my TNS connect string in PL/SQL?
Thank everybody

You need to test connnecting to the database using the SAME oracle home that you installed portal into.
I find that although YOU can connect to the db, their can be occasions when portal can not connect to the db.
So when you use the portal installation dir as your oracle home and connect to the db, hopefully more informative information will be shown to you.

Can a T520i that was configured without an mSATA drive have one added?

I have a T520i (4242 4UU) that was configured without an mSATA drive. Can I add one to it and migrate my Windows (7 Pro 64 bit) partitions to it? (My HD has apparently lost on of the windows partitions so I'll have to do a full installation anyway). Will I have to get drivers first to support the 4 kilo-byte sectors? (my T520i was originally purchased in November 2010 and AFAICD, Lenovo did not add the ability to handle 4kb sectors until December 2010) or will just upgrading the BIOS suffice? Is there any way to upgrade the BIOS from a DVD or USB zip without a hard disk or operating system functioning? If not, will I have to first install a temporary HD, install windows, upgrade the BIOS and THEN migrate windows to the mSATA? Am I correct in assuming that the new SATA III mSATA SSDs with be backwards compatible with a T520i?

Hi
You can perform BIOS upgrade from CD/DVD media:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t520i/downloads/DS018809
Prepare that media on any system with CD/DVD drive attached.
You can install new system on the msata drive from scratch or by entire HDD cloning.
4k sectors trouble isn't actual for modern (upgraded) system and drives.
msata drives with SATA III interface are backward compatible with T520 msata slot.
Note the drive should be in the msata formfactor, not modern m.2.

Refresh HTTP Sender configuration without reboot on MDM 2.0.1

Hello,
I've noticed that when I try to change a XAI HTTP Sender parameter (i.e. HTTP URL 1), the new parameter does not take effect until the server is restarted.
Is there anyway to refresh the Sender configuration without restarting the server?
Thanks.

That's the reason you use 'MPL Refresh Sender' option, to release/refresh all the Sender definitions. Make sure to provide the correct port number.

PSP - DAD configuration Error

I had configured a DAD for mod_plsql in Oracle Http server from the client side browser. The http server is in the sun solaris. It was working fine. One fine day I started getting the error
Fri, 18 Apr 2003 23:08:43 GMT
No DAD configuration Found
DAD name:
PROCEDURE : gateway.htm
URL : http://testl-sun:7777/pls/admin_/gateway.htm
PARAMETERS :
===========
Any Idea How to configure the DAD file and in which directory it is located in the sun machine.
Mohan

Hi Mohan,
Enter the URL in the error message " http://testl-sun:7777/pls/admin_/gateway.htm" in your browser and that should bring up the gateway. You normally configure the DAD through the gateway.
For additional infomation see the "Oracle9i Application Server - Using the PL/SQL Gateway."
Regards,
Don Green

How can I add an iPad to Apple Configurator without losing the user's settings, folders, etc?

When attempting to add an iPad that has already been in use (for some time) by a particular user into Apple Configurator, I end up having to either wipe the iPad entirely as if it is a new iPad, or restore the user's settings and configuration from iCloud during mini-setup. It seems to be one choice or the other.
Is there a way to add the "old" iPad into Apple Configurator for management purposes yet still be able to restore the user's settings from iCloud? That is - items like: folders, pictures, email settings, app data?

nsdjoey wrote:
theAntioch wrote:
This isnt true. Connecting an unsupervised device to configurator and supervising it will wipe the device, there is no way around that. You can attempt an iCloud restore from here, but anything not backed up prior to supervising the device will be erased when supervising it. I have never tried to restore data from an unsupervised iPad so I have no clue if everything will come back.
Let me clarify... You can successfully restore an iCloud backup of an unsupervised iPad to a new (i.e. different) iPad and have it Supervised with data intact. The process below will allow Configurator to Supervise a device without wiping it when an iCloud backup from a different unsupervised iPad is restored to it.
Try it… Get 2 new unsupervised iPads… we'll call them iPad "A" and iPad "B." Take iPad "A" and install a few apps, take a few photos, change the background, create a new document in Pages, etc. Run an iCloud backup of iPad "A" using your Apple ID. This is our unsupervised backup of iPad "A."
Now take new unsupervised iPad "B" and start running through the setup assistant. When you get to the restore screen, choose to restore from iCloud backup. Log in with your Apple ID. Select the backup for iPad "A." The backup will restore and then the iPad will restart. Once it restarts, you get to a "Hello" screen on the iPad. At this point, plug the iPad into your Configurator computer. On the Prepare screen, turn Supervision ON and select "Don't restore backup." Click Prepare.
Configurator will not wipe the iPad. It will run through the supervision process but not wipe it. Once complete, you'll see that iPad "B" is now exactly the same as iPad "A", but if you go to Settings -> General -> Profiles on iPad "B" you will see a Supervision profile installed.
The key here is to use a different iPad from the originally backed up iPad. You can't restore the backup of iPad "A" to iPad "A" again and supervise it without wiping it. But you can take the backup of unsupervised iPad "A" and restore it to iPad "B" and retain apps, data, and settings of iPad "A" but with the Supervision profile.
Hope this clarifies things!
~Joe
I see where your going with that. I dont have any way to reproduce this scenario in my environment, but I will take your word for it that this works. I have only ever plugged in an unsupervised device to configurator and gone through the setup, which always wipes the device. If your saying theres a way around that you should give that a shot OP.

Verification of recvr file channel configuration without sending a message

Hi,
We need to test the configuration((such as directory, filename etc.,) of a receiver file channel. As we all know, in the case of sender channel, since it will keep polling the directory configured, if there is any incorrect directory, it will be indicated in the run time work bench, EVEN IF THE MESSAGE HAS NOt GONE THROUGH THE SENDER FILE CHANNEL. However in the case of receiver file channels, UNLESS THE MESSAGE GOES THROUGH THE RECEIVER FILE CHANNEL, we won't be able to identify the incorrect directory configuration.
Thus, please let me know as to how to identify the incorrect directory configuration in the case of RECEIVER FILE CHANNELS, without sending any message through the same.
I appreciate your early response.
Regards
Venkat

Hi,
AFAIK you can check whether the channel is Started/ Stopped (in RWB), check whether correct parameters are filled in the CC (by visual inspection)....but unless and until you test the scenario you may not know whether the CC is properly working or not....somethimes there is a case that you are asked to pay for each and every message that is sent using XI...is this your case?....if not then you can go ahead and test it end-to-end as Dharamveer said.....
If you get the solution (as you need) then dont forget to share with us
Regards,
Abhishek.

Import MAX configuration without device or simulated device

I'm hoping there's a way to do this.
In previous versions of MAX, it was possible to import Channel and Task information without having to import the Device. This was handy if you didn't have the DAQ boards installed on that PC, but you needed to check Task and Channel information.
I'm currently trying to import an .nce file from a project where I'd used a USB6008 as the DAQ device. I don't have access to one of those at the moment and it's one of the devices that cannot be simulated.
I have tried simulating a similar device with hopes of somehow "tricking" it to import. So far, no luck.
Does anyone know of a way I can have a look at the Channel and Task information in that .nce file or possibly fanagle it into importing without or with another simulated device?
Patrick Allen

Hi pallen,
I actually don’t know of a way to change the configuration in the .nce file. It's a binary file which main use is to import and export complete configurations when you do not need to edit that configuration outside of MAX. The .ini and .txt are intended for editing outside of MAX. However you can always import the .nce in MAX, make the changes needed and export a .ini to your final destination. Sorry that this is not too helpful on your current situation.
Ana P
National Instruments
Applications Engineer

Why I can't import iMovie into Apple Configurator without asking me for more codes. If iMovie is free, and I upgraded the latest version and to Yosemite.

Previously, our school bought a number of codes for iMovie. One of our MacAirs that supervises some iPads through Apple Configurator showed that it was free. However, another Mac Air did not saying that I needed to import more codes. I upgraded everything, software, iMovie in iTunes, and Apple Configurator. Everytime I upload iMovie into Configurator it shows I only have 2 codes, while on the other MacAir, it shows it as free.

Can I import photos from iPhoto ('08; 7.1.5) into latest version of Aperture without upgrading my iPhoto to the iPhoto '11 version?
To elaborate a bit on TD's answer:
You can import only folders of images or selected image files that have been exported from older iPhoto libraries, not the libraries themself.
Aperture 3.4.5 cannot work with iPhoto Libraries that have not been upgraded to iPhoto 9.4. or later at all:
You cannot open them in Aperture:
And you cannot import them as a library to create an Aperture library from the older iPhoto Library.
Without upgrading to iPhoto '11 your only option would be to export your original images and the edited versions from iPhoto '08 and to import the folders of images into Aperture. That would be a lot of work, a waste of disk space, and break the lossless workflow. You will clutter your Aperture library with duplicates (version and edite image) that are no proper original-version pairs.
For a smooth transit from iPhoto to Aperture I strongly recommend to bite the bullet and to upgrade to iPhoto '11 to upgrade your iPhoto libraries to the new version 9.4.3 to preserve all the previous work - albums, books, ratings - you have done in iPhoto.
Aperture 3.3: Using a unified photo library with iPhoto and Aperture
Regards
Léonie

Preparing an iPad in Configurator without updating the iOS

Hi all,
I work on a research study that uses iPads and an app to collect data. The app is a third party app and will not work if the iOS on the iPads is updated beyond iOS 7.0.6. I was trying to apply a backup via Configurator to one of the study's iPads and I got the error message that Configurator couldn't recognize the supervision status of the iPad and that the iPad needed to update the iOS for Configurator to work. I did some research on the interent and it seemed like people who didn't want to update the iOS created a custom iOS in Configurator then prepared their iPads using the custom iOS. I unsupervised my iPad and dowloaded the ipsw I wanted and put it in the custom iOS folder in Configurator but it doesn't work. Everytime I hit the Prepare button I get the same error: Unable to install iOS 7.0.6, unable to restor device with firmware found at file:///Users/DailyDiaryStudy/Library/Containers/com.apple.configurator/Data/Li brary/Caches/com.apple.configurator/UnpackedFirmware/iPad2,3_7.0.6_11B651_Restor e.ipsw/.
Personalization failed, error codes 4027 and 3194.
I've done everything the Apple support website and other websites recommend but it still hasn't worked. I also can't find any file called Unpacked Firmware in the location Configurator gives in the error message. The iPad is already on iOS 7.0.6 and I don't know if that's the problem or the firmware is the problem or if it's something else. I tried preparing the iPad with 7.0.4 and the same thing happened. I only use Apple technology for work so I really don't know anything about it beyond what I've taught myself. I've done some internet searches but I haven't found anything helpful. One person got error code 4027 and did something in the Host file but I don't know what it was. I know updating the iOS would likely solve all my problems but like I said, doing so would mean I would no longer be able to use the study's app on that iPad. I'm using the latest version of Configurator and I'm running Mavericks on the Mac. Any help would be greatly appreciated.
Thank you.

Another way to see this:
Apple offers half price apps. Configurator is not mandatory, but half price apps are almost useless to a school without Configurator.
Using Configurator means schools are forced to always use the most bleeding edge iOS.
==============================================================
Imagine if Microsoft offered half price apps to schools, but only if the IT staff forced everyone to use windows 8. Oh my...
This affects many apps. If you feel apple should not be so forceful and restricive please call and let them know you don't want configurator to force the new ios at the time of prep. (866) 752-7753

DAD Configuration without Protal in iAS EE

Similar Messages

Maybe you are looking for