Daemon error with Intego NetBarrier X3

When trying to launch NetBarrier I get message window with the following: "Waiting for Max OS X initialization to complete..."
After some time, an error message appears as follows:
"A fatal error occurred. The NetBarrier daemon is not running. It should be running to allow NetBarrier to configure it. You may need to restart your Macintosh."
I tried restarting but it did not resolve the problem. Any suggestions??
I've read the other threads recommending to uninstall Intego due to VirusBarrier problems. So far, VB appears to be running okay. Let's say that I want to keep the $130 package and that since it worked for a couple of weeks, I'd like to know what caused it to not work anymore. I sent the above info to Intego on 12/30 and have not yet heard back. I'm hoping its the holidays slowing things up!

I contacted Intego by telephone (toll call) and the person I spoke with was very helpful. After trying a few things, she determined that my best course was a complete uninstall and reinstall of the Security Barrier software package.
So far, it seems to be working just fine. The pain is that I have to reset all of the preferences for each of my family members. Hopefully, this will not be a recurring problem.
PS- About an hour after my telephone call with Intego, a different person finally responded to my web-based request for help. This person's solution was to delete all of the preference files, one-by-one until it the problem went away with restarts between each deletion. I think the reinstall was the least painful option.

Similar Messages

[SOLVED] alsa daemon error during init with Thinkpad X220

Hi,
I just updated my system (including a kernel update). After reboot, I found alsa daemon, which is used to restore previous volume level, failed to start. I tried to start that daemon manually after the boot process is completed, and that produced an error message
sudo rc.d start alsa
:: Restoring ALSA Levels [BUSY]
Found hardware: "HDA-Intel" "Intel CougarPoint HDMI" "HDA:14f1506e,17aa21da,00100000 HDA:80862805,80860101,00100000" "0x17aa" "0x21da"
Hardware is initialized using a generic method
[FAIL]
However, the volume level restored successfully. It seems that recent Intel plantform provides two soundcard, and that error only affected the secondary card, which has nothing to do about system volume level.
Anyway, I hate to have a ``[FAIL]'' During init process. Any suggesting to get rid of that problem? Thanks
System Info: (I use linux-ck as my kernel with modified config)
uname -a
Linux Thomas 3.2.1-2-ck #1 SMP PREEMPT Sun Jan 15 00:16:41 CST 2012 x86_64 Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz GenuineIntel GNU/Linux
lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e)
0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 07)
0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
config.gz:
http://codepad.org/XtUSbtdw
(Edit typo)
Last edited by cap_sensitive (2012-01-17 06:12:01)

This morning, I performed a system update and I did not see any errors with alsa when I rebooted. Audio hardware is:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Have you tried manually restarting alsa after the system boots up to see if you get the same error? You can restart alsa with the following command:
sudo /etc/rc.d/alsa force-restart
Post your results. If the error occurs during the manual restart, it should also include some details about what caused the error

Daemon error in solaris 11

Hi guys,
thanks for helping out with this. I am running solaris 11 on a T2000 server.
When I powered on the system, I received this error
2013-08-21T01:28:54-04:00 solaris11 in.ndpd[991]: [ID 302683 daemon.error] incoming_ra: SIOCSLIFLNKINFO (interface net0): Invalid argument
Please can someone help explain what this is and how i can fixed it?
I will really appreciate it.
Thank you
Arrey

988801 wrote:
Thanks for pointing that out to me. I appreciate it. I am have taking the other post down already.
Thanks though. Let me take this opportunity to ask you this;
Is there any material for troubleshooting solaris 11? I am just starting out, so it really gets confusing.
Thank you
I have no idea.
I have no recent hands-on familiarity with that sort of error.
You will need to wait and hope that others reply to any of your forum posts.
A quick Google search on "incoming_ra: SIOCSLIFLNKINFO" shows only three search results.
It shows your two forum posts and an old README of a build update from 2009 that mentions bug fixes in the old OpenIndiana project. If that's any indication, then it may be a simple patch issue.
Again, wait and hope that others choose to respond.

Cluster.CCR: [ID 544775 daemon.error] libpnm system error: read error

Hi all,
I have 2 V880 server with Solaris 9 with Sun cluster 3.1 with 2 nodes. I am getting the "Cluster.CCR: [ID 544775 daemon.error] libpnm system error: read error" error in one cluster node and the same tine i am getting
"Jun 11 11:13:56 server1 Cluster.PNM: [ID 517036 daemon.notice] connection from outside the cluster - rejected.*
Jun 11 11:14:06 server1 Cluster.CCR: [ID 988885 daemon.error] libpnm error: no LOGICAL PERNODE IP for clusternode2-priv.i,"
error in the first cluster node.
Please see the log andd give log
Jun 11 11:24:12 dbserver2 Cluster.CCR: [ID 544775 daemon.error] libpnm system error: read error.
Jun 11 11:13:56 dbserver1 Cluster.PNM: [ID 517036 daemon.notice] connection from outside the cluster - rejected.*
Jun 11 11:14:06 dbserver1 Cluster.CCR: [ID 988885 daemon.error] libpnm error: no LOGICAL PERNODE IP for clusternode2-priv.i,

Hi Tim.Read ,
I am mentioning the details of the cluster,
SUN Cluster 3.1 with 2 nodes, and Solaris 9 and SUN fire V890 Server.
It is configured recently including OS and everything like a fresh installation, but not done any changes after that. After the configuration i am getting this error but i am not facing any other issues with cluster. Please find the scstat out put and please give a solution, thanks in advance ,
root@server1 # scstat -q
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 3
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: server2 1 1 Online
Node votes: server1 1 1 Online
-- Quorum Votes by Device --
Device Name Present Possible Status
Device votes: /dev/did/rdsk/d12s2 1 1 Online
root@server1 # scstat
-- Cluster Nodes --
Node name Status
Cluster node: server2 Online
Cluster node: server1 Online
-- Cluster Transport Paths --
Endpoint Endpoint Status
Transport path: server2:ce4 server1:ce4 Path online
Transport path: server2:ce2 server1:ce2 Path online
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 3
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: server2 1 1 Online
Node votes: server1 1 1 Online
-- Quorum Votes by Device --
Device Name Present Possible Status
Device votes: /dev/did/rdsk/d12s2 1 1 Online
-- Device Group Servers --
Device Group Primary Secondary
Device group servers: dsk/d12 - -
Device group servers: rmt/3 - -
Device group servers: rmt/2 - -
Device group servers: rmt/1 - -
Device group servers: rmt/6 - -
Device group servers: rmt/5 - -
Device group servers: rmt/4 - -
Device group servers: rmt/7 - -
Device group servers: rmt/8 - -
Device group servers: ora-newds server1 server2
-- Device Group Status --
Device Group Status
Device group status: dsk/d12 Offline
Device group status: rmt/3 Offline
Device group status: rmt/2 Offline
Device group status: rmt/1 Offline
Device group status: rmt/6 Offline
Device group status: rmt/5 Offline
Device group status: rmt/4 Offline
Device group status: rmt/7 Offline
Device group status: rmt/8 Offline
Device group status: ora-newds Online
-- Multi-owner Device Groups --
Device Group Online Status
-- Resource Groups and Resources --
Group Name Resources
Resources: ClusterIp -
Resources: MountPoint Mounts
Resources: rman rmanb_fs
-- Resource Groups --
Group Name Node Name State
Group: ClusterIp server1 Online
Group: ClusterIp server2 Offline
Group: MountPoint server2 Offline
Group: MountPoint server1 Online
Group: rman server2 Offline
Group: rman server1 Online
-- Resources --
Resource Name Node Name State Status Message
Resource: Mounts server2 Offline Offline
Resource: Mounts server1 Online Online
Resource: rmanb_fs server2 Offline Offline
Resource: rmanb_fs server1 Online Online
-- IPMP Groups --
Node Name Group Status Adapter Status
IPMP Group: appserver1 app1-nafo Online ce5 Online
IPMP Group: appserver2 app2-nafo Online ce3 Online

Gethostbyname daemon.error

Hi,
I have done a Solaris 8 jumpstart install on a Netra X1 - successfully - i think...
I have found the following error in dmesg and /var/adm/messages
<date> <hostname> /usr/lib/snmp/snmpdx: [ID 838575 daemon.error] unable to get my IP address:
gethostbyname(tatiana) failed [h_errno: host not found(1)]
I also see this when I boot up at the console.
Can anyone tell me what this means and what this effects?
Many Thanks
Monica

Hi There,
Step1
First check in Services Manager to see that OracleTNSNames service is running. If it is running go to Step 2. In not start it and then restart PSUB service and try to run a job.
Step 2
Lets say you have installed OC in D drive.
Go to D:\oracle\ora92\network\admin\tnsnames.ora
Open tnsnames.ora in notepad and check to see whats the "Service Name".
Make sure that the Startup parameters you are giving when starting PSUB contains SID which = Service name
For example service name is ocproddb then:
Start PSUB as RXCPROD with parameters:
ocproddb 45 verbose D:\\opapps\\oc\\45
Let me know whether it helps.
Best regards
Edited by: user1841803 on Dec 28, 2008 11:00 PM

FYI! Intego NetBarrier X5 and iTunes App Store Issues

I discovered last night (while attempting to download the iPhone 3.0 update) that my 3rd party firewall, Intego's NetBarrier X5, is preventing App Store application and iPhone software updates.
Back in early March, I upgraded NetBarrier from X4 to X5, importing my settings from the old version into the new. From that point on, I have been unable to update my iPhone applications from within iTunes; I was caught in an endless loop of being asked to log into the App Store, and being denied access (almost as if my credentials weren't making it to Apple's servers). The weird part was, I had no problem downloading music, movies, etc. from the iTunes Store; this issue only affected App Store downloads/updates.
I do not know if this is a problem with Intego or an Apple. I'm inclined to believe that something changed within iTunes 8; a change to the ports used to access the App Store, as opposed to the regular iTunes Store. I say this because, when I turned off NetBarrier completely, I was finally able to access/download my application updates after months of not being able to. As soon as I turned it back on, I got caught up in that endless login loop again. This is definately an issue.
I post this information in the hope that it will resolve similar issues for others. iTunes Support, when contacted numerous times, was completely useless.
It appears that I'm going to have to configure my firewall to allow ALL iTunes traffic to pass. Can someone please tell me where I can find a comprehensive list of ports that must be open for iTunes to function properly? I would greatly appreciate it.

Hello Everyone,
After upgrading to Snow Leopard, and re-installing X5 (10.5.4), it looks like I may have identified the cause of this issue.
It appears that, within X5, if you select the "+Hide my Apple ID when using iTunes MiniStore+" option (Overview --> Privacy --> Data --> Surf), it jacks-up connections to iTunes Store App/iPhone OS Updates.
For now, I have de-selected this option, and everything seems to be functioning as it should.
I cannot believe that something as stupid as this has caused me (and countless others) so many months of aggravation. I will be reporting this as a defect to Intego later today.
Hope this information helps.
Kerry

An unexpected error with a log file

I am trying to run a client server code on Java 5 and I get this wierd error with a bug report in a log...any idea what could be the cause...I have no Idea what its saying.
An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x69952fbd, pid=799, tid=311313
# Java VM: Java HotSpot(TM) Server VM (1.5.0_01-b08 mixed mode)
# Problematic frame:
# C [libstdc++.so.5+0x81fbd] _ZNSs6appendERKSs+0x1d
# An error report file with more information is saved as hs_err_pid799.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
and the error report file says....
An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x69952fbd, pid=799, tid=311313
# Java VM: Java HotSpot(TM) Server VM (1.5.0_01-b08 mixed mode)
# Problematic frame:
# C [libstdc++.so.5+0x81fbd] _ZNSs6appendERKSs+0x1d
--------------- T H R E A D ---------------
Current thread (0x0805ae78): JavaThread "RMI TCP Connection(2)-64.50.99.85" daemon [_thread_in_native, id=854]
siginfo:si_signo=11, si_errno=0, si_code=1, si_addr=0x736f6c63
Registers:
EAX=0xbd9fe998, EBX=0x69984e54, ECX=0x00000000, EDX=0x081e0dcc
ESP=0xbd9fe7e8, EBP=0xbd9fe820, ESI=0x736f6c63, EDI=0x0805ae78
EIP=0x69952fbd, CR2=0x736f6c63, EFLAGS=0x00010202
Top of Stack: (sp=0xbd9fe7e8)
0xbd9fe7e8: 00000034 bd9fe88c bd9fe918 69984e54
0xbd9fe7f8: bd9fe848 0805ae78 bd9fe998 69955069
0xbd9fe808: 081e3f78 00000043 bd9fe860 698c7764
0xbd9fe818: bd9fe9a8 0805ae78 bd9fe850 698973c5
0xbd9fe828: bd9fe998 736f6c63 bd9fe860 6995261c
0xbd9fe838: 081e3f78 bd9fe848 bd9fe860 69916675
0xbd9fe848: 698c7764 bd9fe9a8 bd9fe9c0 698b2977
0xbd9fe858: bd9fe998 081e8a3c 736f6c63 698b21c0
Instructions: (pc=0x69952fbd)
0x69952fad: 75 0c e8 bc a2 fb ff 81 c3 a0 1e 03 00 89 45 e0
0x69952fbd: 8b 16 8b 00 8b 7a f4 8b 48 f4 01 f9 3b 48 f8 0f
Stack: [0xbd801000,0xbda00000), sp=0xbd9fe7e8, free space=2037k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [libstdc++.so.5+0x81fbd] _ZNSs6appendERKSs+0x1d
C [libDRCF.so+0x313c5] ZStplIcSt11chartraitsIcESaIcEESbIT_T0_T1_ERKS6_S8_+0x37
C [libDRCF.so+0x4c977] ZN8CorStora4saveERiS0NS_7which_tERSs+0x35
C [libDRCF.so+0x30c8b] _ZN11RecordGroupI8VariableE4saveER8CorStora+0x43
C [libDRCF.so+0x306f4] _ZN11GroupVectorI8VariableE4saveER8CorStora+0x44
C [libDRCF.so+0x2f9ba] _ZN8RecordDBI8VariableE4saveER8CorStora+0x86
C [libDRCF.so+0x2e3e1] _ZN9RCFCorpusI8VariableE4saveEv+0xbf
C [libDRCF.so+0x4e848] _ZN6RcfApi10saveCorpusEv+0x30
C [libDRCF.so+0x5259a] Java_com_lt_rcf_DRCFJNI_RcfApi_1saveCorpus+0x3a
j com.lt.rcf.DRCFJNI.RcfApi_saveCorpus(J)Z+0
j com.lt.rcf.RcfApi.saveCorpus()Z+4
j com.lt.rcf.RcfServer.saveCorpus()Z+4
v ~StubRoutines::call_stub
V [libjvm.so+0x24e6dc]
V [libjvm.so+0x3df698]
V [libjvm.so+0x24e50f]
V [libjvm.so+0x42297c]
V [libjvm.so+0x42564a]
V [libjvm.so+0x2b5d08]
C [libjava.so+0x13714] Java_sun_reflect_NativeMethodAccessorImpl_invoke0+0x34
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+111
j sun.rmi.server.UnicastServerRef.dispatch(Ljava/rmi/Remote;Ljava/rmi/server/RemoteCall;)V+246
j sun.rmi.transport.Transport$1.run()Ljava/lang/Object;+23
v ~StubRoutines::call_stub
V [libjvm.so+0x24e6dc]
V [libjvm.so+0x3df698]
V [libjvm.so+0x24e50f]
V [libjvm.so+0x2a42eb]
C [libjava.so+0x93bc] Java_java_security_AccessController_doPrivileged__Ljava_security_PrivilegedExceptionAction_2Ljava_security_AccessControlContext_2+0x3c
j java.security.AccessController.doPrivileged(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;)Ljava/lang/Object;+0
j sun.rmi.transport.Transport.serviceCall(Ljava/rmi/server/RemoteCall;)Z+163
j sun.rmi.transport.tcp.TCPTransport.handleMessages(Lsun/rmi/transport/Connection;Z)V+185
j sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run()V+685
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub
V [libjvm.so+0x24e6dc]
V [libjvm.so+0x3df698]
V [libjvm.so+0x24df35]
V [libjvm.so+0x24dfce]
V [libjvm.so+0x2b88c5]
V [libjvm.so+0x46f1cd]
V [libjvm.so+0x3e01a8]
C [libpthread.so.0+0x5e51]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.lt.rcf.DRCFJNI.RcfApi_saveCorpus(J)Z+0
j com.lt.rcf.RcfApi.saveCorpus()Z+4
j com.lt.rcf.RcfServer.saveCorpus()Z+4
v ~StubRoutines::call_stub
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+111
j sun.rmi.server.UnicastServerRef.dispatch(Ljava/rmi/Remote;Ljava/rmi/server/RemoteCall;)V+246
j sun.rmi.transport.Transport$1.run()Ljava/lang/Object;+23
v ~StubRoutines::call_stub
j java.security.AccessController.doPrivileged(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;)Ljava/lang/Object;+0
j sun.rmi.transport.Transport.serviceCall(Ljava/rmi/server/RemoteCall;)Z+163
j sun.rmi.transport.tcp.TCPTransport.handleMessages(Lsun/rmi/transport/Connection;Z)V+185
j sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run()V+685
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
=>0x0805ae78 JavaThread "RMI TCP Connection(2)-64.50.99.85" daemon [_thread_in_native, id=854]
0x69a02810 JavaThread "DestroyJavaVM" [_thread_blocked, id=799]
0x081e8778 JavaThread "RMI LeaseChecker" daemon [_thread_blocked, id=820]
0x08139810 JavaThread "GC Daemon" daemon [_thread_blocked, id=816]
0x08138ce8 JavaThread "RMI Reaper" [_thread_blocked, id=815]
0x08138628 JavaThread "Timer-0" daemon [_thread_blocked, id=814]
0x08127970 JavaThread "RMI TCP Accept-0" daemon [_thread_in_native, id=813]
0x0810ee58 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=810]
0x0810d9d8 JavaThread "CompilerThread1" daemon [_thread_blocked, id=809]
0x0810c9b8 JavaThread "CompilerThread0" daemon [_thread_blocked, id=808]
0x0810b958 JavaThread "AdapterThread" daemon [_thread_blocked, id=807]
0x0810aab0 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=806]
0x081016a0 JavaThread "Finalizer" daemon [_thread_blocked, id=805]
0x080ff8d8 JavaThread "Reference Handler" daemon [_thread_blocked, id=804]
Other Threads:
0x080fd108 VMThread [id=803]
0x08110390 WatcherThread [id=811]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
PSYoungGen total 3584K, used 667K [0x65d00000, 0x66100000, 0x69530000)
eden space 3072K, 21% used [0x65d00000,0x65da6f60,0x66000000)
from space 512K, 0% used [0x66000000,0x66000000,0x66080000)
to space 512K, 0% used [0x66080000,0x66080000,0x66100000)
PSOldGen total 28800K, used 156K [0x49b30000, 0x4b750000, 0x65d00000)
object space 28800K, 0% used [0x49b30000,0x49b571a8,0x4b750000)
PSPermGen total 16384K, used 2968K [0x45b30000, 0x46b30000, 0x49b30000)
object space 16384K, 18% used [0x45b30000,0x45e16378,0x46b30000)
Dynamic libraries:
08048000-08056000 r-xp 00000000 03:07 18410 /usr/local/lib/jdk1.5.0_01/bin/java
08056000-08058000 rw-p 0000e000 03:07 18410 /usr/local/lib/jdk1.5.0_01/bin/java
08058000-08232000 rwxp 00000000 00:00 0
40000000-40016000 r-xp 00000000 03:01 196866 /lib/ld-2.3.2.so
40016000-40017000 rw-p 00015000 03:01 196866 /lib/ld-2.3.2.so
40017000-40018000 rw-p 00000000 00:00 0
40018000-40019000 r--p 00000000 00:00 0
40019000-4001f000 r-xp 00000000 03:07 305931 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/native_threads/libhpi.so
4001f000-40020000 rw-p 00006000 03:07 305931 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/native_threads/libhpi.so
40020000-4002d000 r-xp 00000000 03:01 197024 /lib/libpthread-0.10.so
4002d000-4002f000 rw-p 0000c000 03:01 197024 /lib/libpthread-0.10.so
4002f000-40071000 rw-p 00000000 00:00 0
40071000-40073000 r-xp 00000000 03:01 196982 /lib/libdl-2.3.2.so
40073000-40074000 rw-p 00002000 03:01 196982 /lib/libdl-2.3.2.so
40074000-40075000 rw-p 00000000 00:00 0
40075000-4019d000 r-xp 00000000 03:01 196978 /lib/libc-2.3.2.so
4019d000-401a5000 rw-p 00127000 03:01 196978 /lib/libc-2.3.2.so
401a5000-401a8000 rw-p 00000000 00:00 0
401a8000-4069b000 r-xp 00000000 03:07 193481 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/server/libjvm.so
4069b000-406fd000 rw-p 004f2000 03:07 193481 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/server/libjvm.so
406fd000-40b13000 rw-p 00000000 00:00 0
40b13000-40b34000 r-xp 00000000 03:01 196997 /lib/libm-2.3.2.so
40b34000-40b35000 rw-p 00020000 03:01 196997 /lib/libm-2.3.2.so
40b35000-40b3d000 rw-s 00000000 03:06 179171 /tmp/hsperfdata_pradeep/799
40b3d000-40b4f000 r-xp 00000000 03:01 197009 /lib/libnsl-2.3.2.so
40b4f000-40b50000 rw-p 00011000 03:01 197009 /lib/libnsl-2.3.2.so
40b50000-40b52000 rw-p 00000000 00:00 0
40b52000-40b59000 r-xp 00000000 03:01 197011 /lib/libnss_compat-2.3.2.so
40b59000-40b5a000 rw-p 00006000 03:01 197011 /lib/libnss_compat-2.3.2.so
40b5a000-40b62000 r-xp 00000000 03:01 197016 /lib/libnss_nis-2.3.2.so
40b62000-40b63000 rw-p 00007000 03:01 197016 /lib/libnss_nis-2.3.2.so
40b63000-40b6b000 r-xp 00000000 03:01 197014 /lib/libnss_files-2.3.2.so
40b6b000-40b6c000 rw-p 00008000 03:01 197014 /lib/libnss_files-2.3.2.so
40b6c000-40b77000 r-xp 00000000 03:07 305935 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/libverify.so
40b77000-40b78000 rw-p 0000b000 03:07 305935 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/libverify.so
40b78000-40b99000 r-xp 00000000 03:07 305936 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/libjava.so
40b99000-40b9b000 rw-p 00020000 03:07 305936 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/libjava.so
40b9b000-40bae000 r-xp 00000000 03:07 305938 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/libzip.so
40bae000-40bb0000 rw-p 00012000 03:07 305938 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/libzip.so
40bb0000-43171000 r--s 00000000 03:07 306574 /usr/local/lib/jdk1.5.0_01/jre/lib/rt.jar
43171000-431d9000 rw-p 00000000 00:00 0
431d9000-43260000 r--s 00000000 03:07 306155 /usr/local/lib/jdk1.5.0_01/jre/lib/jsse.jar
43260000-43274000 r--s 00000000 03:07 305969 /usr/local/lib/jdk1.5.0_01/jre/lib/jce.jar
43274000-43aaf000 r--s 00000000 03:07 306402 /usr/local/lib/jdk1.5.0_01/jre/lib/charsets.jar
43aaf000-45b2f000 rwxp 00028000 00:00 0
45b30000-6974f000 rwxp 030a9000 00:00 0
6974f000-69775000 r--s 00000000 03:07 80989 /usr/local/lib/jdk1.5.0_01/jre/lib/ext/sunjce_provider.jar
69775000-697a0000 r--s 00000000 03:07 80991 /usr/local/lib/jdk1.5.0_01/jre/lib/ext/sunpkcs11.jar
697a0000-697a2000 r--s 00000000 03:07 81394 /usr/local/lib/jdk1.5.0_01/jre/lib/ext/dnsns.jar
697a2000-69866000 r--s 00000000 03:07 82743 /usr/local/lib/jdk1.5.0_01/jre/lib/ext/localedata.jar69866000-698be000 r-xp 00000000 03:08 3489986 /home/pradeep/bin/libDRCF.so
698be000-698c9000 rw-p 00057000 03:08 3489986 /home/pradeep/bin/libDRCF.so
698c9000-698ca000 r-xp 00000000 03:07 305957 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/librmi.so
698ca000-698cb000 rw-p 00000000 03:07 305957 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/librmi.so
698cb000-698cc000 rw-p 00000000 00:00 0
698d1000-69970000 r-xp 00000000 03:07 499162 /usr/lib/libstdc++.so.5.0.7
69970000-69986000 rw-p 0009e000 03:07 499162 /usr/lib/libstdc++.so.5.0.7
69986000-6998b000 rw-p 00000000 00:00 0
6998b000-69993000 r-xp 00000000 03:01 195462 /lib/libgcc_s.so.1
69993000-69994000 rw-p 00007000 03:01 195462 /lib/libgcc_s.so.1
69994000-699b5000 r--s 00000000 03:07 435887 /usr/share/java/jaxp-1.2.jar
699b5000-699c9000 r-xp 00000000 03:07 305941 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/libnet.so
699c9000-699ca000 rw-p 00013000 03:07 305941 /usr/local/lib/jdk1.5.0_01/jre/lib/i386/libnet.so
69a00000-69a4a000 rw-p 0006c000 00:00 0
69a4a000-69b00000 ---p 0008d000 00:00 0
69b00000-69c28000 r--s 00000000 03:07 434814 /usr/share/java/xercesImpl.jar
bd601000-bd604000 ---p 00003000 00:00 0
bd604000-bd800000 rwxp 00006000 00:00 0
bd801000-bd804000 ---p 00003000 00:00 0
bd804000-bda00000 rwxp 00006000 00:00 0
bda01000-bda04000 ---p 00003000 00:00 0
bda04000-bdc00000 rwxp 00006000 00:00 0
bdc01000-bdc04000 ---p 00003000 00:00 0
bdc04000-bde00000 rwxp 00006000 00:00 0
bde01000-bde04000 ---p 00003000 00:00 0
bde04000-be000000 rwxp 00006000 00:00 0
be001000-be004000 ---p 00003000 00:00 0
be004000-be200000 rwxp 00006000 00:00 0
be200000-be201000 ---p 00000000 00:00 0
be201000-be400000 rwxp 00001000 00:00 0
be401000-be404000 ---p 00003000 00:00 0
be404000-be600000 rwxp 00006000 00:00 0
be600000-be604000 ---p 00000000 00:00 0
be604000-be800000 rwxp 00004000 00:00 0
be800000-be804000 ---p 00000000 00:00 0
be804000-bea00000 rwxp 00004000 00:00 0
bea00000-bea04000 ---p 00000000 00:00 0
bea04000-bec00000 rwxp 00004000 00:00 0
bec01000-bec04000 ---p 00003000 00:00 0
bec04000-bee00000 rwxp 00006000 00:00 0
bee01000-bee04000 ---p 00003000 00:00 0
bee04000-bf000000 rwxp 00006000 00:00 0
bf001000-bf004000 ---p 00003000 00:00 0
bf004000-bf200000 rwxp 00006000 00:00 0
bf200000-bf201000 ---p 00000000 00:00 0
bf201000-bf400000 rwxp 00001000 00:00 0
bf400000-bf401000 ---p 00000000 00:00 0
bf401000-bf600000 rwxp 00001000 00:00 0
bf600000-bf601000 ---p 00000000 00:00 0
bf601000-bf800000 rwxp 00001000 00:00 0
bfe01000-bfe04000 ---p 00000000 00:00 0
bfe04000-c0000000 rwxp ffe05000 00:00 0
VM Arguments:
java_command: com/lt/rcf/RcfServer 64.50.99.85
Environment Variables:
JAVA_HOME=/usr/local/lib/jdk
CLASSPATH=./:/usr/local/lib/jdk/bin/:/home/pradeep/jdom-b10/src/java/:/usr/share/java/xmlParserAPIs.jar:/usr/share/java/xercesImpl.jar:/home/pradeep/DRCF/
PATH=/usr/local/lib/jdk/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games
LD_LIBRARY_PATH=/usr/local/lib/jdk1.5.0_01/jre/lib/i386/server:/usr/local/lib/jdk1.5.0_01/jre/lib/i386:/usr/local/lib/jdk1.5.0_01/jre/../lib/i386:/home/pradeep/bin/
SHELL=/bin/bash
DISPLAY=localhost:13.0
--------------- S Y S T E M ---------------
OS:3.1
uname:Linux 2.4.20.kl10 #1 SMP Tue May 6 11:29:07 CDT 2003 i686
libc:glibc 2.3.2 linuxthreads-0.10 (fixed stack)
rlimit: STACK 2044k, CORE 0k, NPROC infinity, NOFILE 1024, AS infinity
load average:2.42 2.15 2.10
CPU:total 2 family 6, cmov, cx8, fxsr, mmx, sse
Memory: 4k page, physical 2069724k(271804k free), swap 939792k(923304k free)
vm_info: Java HotSpot(TM) Server VM (1.5.0_01-b08) for linux-x86, built on Dec 6 2004 19:33:50 by java_re with gcc 3.2.1-7a (J2SE release)

hi -
i just encountered a crash that looks the same to me (the segmentation fault and logs look very similar - problems around the JavaThread "RMI TCP Connection".
Did you get anywhere with this? do you have any clue by now what causes this, or do you have a workaround to avoid it?
10x,
Noam

[ID 702911 daemon.error] subagent registration failed

Hi,
I am getting the following error messages in the /var/adm/messages:
dhemapn1 /opt/sog/bin/sogalarmd: [ID 702911 daemon.error] subagent registration failed
Would anyone please suggest how to handle this issue.
Thanks in advance
Regards
Shahriar

Hi,
Suggest to check sub agent registration file in /etc/snmp/conf directory(with .reg exetention). Please verify if you have mentioned any port number in it. Check same not being used by any other agent or application. Also check "command" veriable in master agent resource file to invokes subagent. Most likely I feel it may be port clash issue.
You may also confirm that port you are using is not listed for some other application in /etc/services file.
Thanks,
Santosh

Daemon error while connecting:/@ocproddc

Hi!,
I am using Oracle Clinical version 4.5.0. OC back end is installed on Windows 2000.
PSUB batch job has hung with “ENTERED” status. Log file is showing following error:
ERROR: Daemon error while connecting:/@ocproddc
ORA-12154: TNS: could not resolve service name
Please provide solution.
Thanks
Message was edited by:
user570602

Hi There,
Step1
First check in Services Manager to see that OracleTNSNames service is running. If it is running go to Step 2. In not start it and then restart PSUB service and try to run a job.
Step 2
Lets say you have installed OC in D drive.
Go to D:\oracle\ora92\network\admin\tnsnames.ora
Open tnsnames.ora in notepad and check to see whats the "Service Name".
Make sure that the Startup parameters you are giving when starting PSUB contains SID which = Service name
For example service name is ocproddb then:
Start PSUB as RXCPROD with parameters:
ocproddb 45 verbose D:\\opapps\\oc\\45
Let me know whether it helps.
Best regards
Edited by: user1841803 on Dec 28, 2008 11:00 PM

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

Odd Error with decode function in Order By Clause

I am trying to compile a procedure and can't get around an error with a dynamic order by that doesn't make much sense to me. I can repoduce the error with a plain select statment in sql plus so I can rule out a declaration error. Here is an example with 2 numeric columns and a date column.
select task_id, display_date, remark_id from task_list
where task_id > 1000
order by decode('Task_ID', 'Task_ID',Task_ID, 'Display_Date', Display_Date, 'Remark_ID',Remark_ID)
returns the error:
select task_id, display_date, remark_id from task_list
ERROR at line 1:
ORA-00932: inconsistent datatypes: expected NUMBER got DATE
I'm not sure why this error is occuring, because it doesn't even hit the Display_Date field in the Decode statment. If I take the Display_date out of the statement, it runs properly. If I change Display_Date to To_Char(Display_Date) it also runs fine, but the sorting is incorrect. Also I'm running 9.2, and do not want to use dynamic sql to build my query. Any Ideas out there as to the cause of this error?

I did find a workaround to this issue by breaking the decode statment into three separate statement, but I still think that the way it is written above should work, and may be a bug, or an error that I don't understand fully.
The Order by was rewritten like this:
order by decode(pSort, 'Task_ID',Task_ID), decode(pSort, 'Display_Date', Display_Date),
decode(pSort, 'Remark_ID',Remark_ID);
Thanks

XML Publisher Error with reports published in XML publisher

Hi All,
I am geting the following error with a report published using XML Publisher
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
The system cannot locate the resource specified. Error processing resource 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.d...
How can i Rectify this?

Hi Ark,
In order to generate a report using xml publisher. we need the following.
1. XML Data
2. Template file (RTF/PDF/..)
XML data will not be created by the template file.
We will be required to create XML data. One of the easiest way to create xml output is using the RDF. We can change the rdf output type in the concurrent program to XML.
Once the xml and the template is available, "XML Report Publisher" will be able to generate the output in the required format.
Thanks,
K.Nataraja Suthan,

Graphic problems/errors with Mainstage 3 and MBP (15'' 2011)

Hi,
I bought Mainstage 3 for my MBP (15'' 2011).
When i click con "perform" i get graphic errors.
I have the same issue with the old Mainstage version since Mountain Lion.
Also a fresh installation didn't help.
I think i'm not the only one with this issue!
I don't know how to report a bug?
Perhaps someone can help me.
(and I'm probably not the only one (see feedback in Apple Store) If you also have this problem, please add a comment with your configuration (Hardware, Software))
/forgotten ebi
So, here an example how it looks like when i click on "perform":

Same configuration,same problem. BUT I found a workaround.
Mainstage has this error with the AMD video card and/or a second monitor connected.
With a little app (http://gfx.io) it's possible to really force the MBPro to use the Intel Graphics card.
This will work only with the internal screen, not with a second screen connected.
And sometimes you need to restart, to really make the Intel video card free.
This works fine...In the meantime of a fix.

Error with an infoset in BI

HI BI gurus,
we have a problem with an infoset.
We create an infoset in RSA1 linked to a cube and a DSO.
We activate it in english without problems and I can create a query with no errors (with a english logon).
If I try to create a query in italian language the query designer show mw this error: " unexpected error - RCF_SYSTEM_FAILURE. You must restart the query designer."
Do you have any idea how to fix and solve this problem? We try to activete the infoset in Italian but the error remains.
Thanks for any help.
SB

Hi,
is italien installed as a language in your system?
Siggi

I am trying to download my photos from my iphone to my mac-iphoto. It keeps trying but about halfway through it says there is an error with a photo therefore it wont download any of my pictures or videos. It wont tell me which picture is the issue.

I took a lot of pictures and video on my recent trip to Ireland. Now I am trying to download the photos and videos from my iphone to my mac - iphoto. I have tried 3 times and each time (at a different point) I get a message telling me that there was an error with one of my photos and it wont load the pictures. Help!!

Try using Image Capture to download to a folder on the Desktop. If there's a damaged file on the iPhone that's preventing the download you can isolate it with Image Capture and then delete it from the iPhone.

Daemon error with Intego NetBarrier X3

Similar Messages

Maybe you are looking for