DAG Concept not working in my Exchange 2010

Hi ,
Exchange 2010
In my setup two mailbox servers and 2 servers with HUB and CAS role.
One of my mailbox servers got down and DAG not works , and also noticed all database dismounted including the other mailbox server Databases.
When Mailbox server brought up and all databases mounted without any manual intervention.
We have given file share witness as hub server.
Is there specific reason for this?
Thanks

Hello,
Please check Andy's suggestion.
Please use test-replicationhealth cmdlet to check all aspects of replication and replay for DAG.
Please check if your network configuration is correct. Here is an article for your reference.
http://technet.microsoft.com/en-us/library/dd638104(EXCHG.140).aspx
Cara Chen
TechNet Community Support

Similar Messages

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

Contacts app not finding names in Exchange 2010

Contacts app not finding names in Exchange 2010 server
This is weird, could be a bug in 10.8.2, not sure, want to see if anyone else is seeing this.
Mountain Lion 10.8.2
Exchnage account created for: Mail, Contacts, Calendars. All looks good there.
Cannot lookup names / email addresses in Contacts Global Address List (GAL) or in Mail app.
Can delete the Exchnage account in Contacts and re-add it, and it will work.
Once Contacts quits and is re-luanched, no dice. No connection, just spins and spins.
Eventually Contacts app crashes, (not responding).
Outlook 2011 works just fine, seems an issue with Contacts.
Thanks,
John K

I thinkk this is a bug in Contacts app, 7.1 (1167), in MT Lion.
If one inputs the actual AD domain controllers dns name, for the Internal Server, Contacts app does the lookup successfully and pretty quick.
This is how it is on Outlook 2011 BTW. Directoy Service in OL 2011 is the AD domain controller FQDN, not the Exchnage server.
thanks,
jk

Exchange OWA does not load OWA for Exchange 2010 users

I have recently installed Exchange 2013 SP1 CU4 in my existing Exchange 2010 SP3 environment but when I use Exchange 2013 OWA to login Exchange 2010 users (it should automatically take the user to Exchange 2010 OWA) but I get this error message "Forbidden
403- Access is denied". However exchange 2010 users can login to their /ecp directory from exchange 2013. Exchange 2010 users can use OWA using their exchange2010/owa URL without any problems. We do not have any http or https redirection enabled
on any of the server. Also I have tried to uncheck the "Required SSL" settings for default web site on both Exchange servers but error is still same. Any help will be highly appreciated.

Hi,
According to your description, your Exchange 2013 cannot proxy OWA request to Exchange 2010 server, but ECP　request　can work properly.
In this case, Ｉ'd like to confirm OWA and ECP settings on Exchange 2013 and 2010 servers before going further:
Get-OWAvituraldirectory |fl identify,*url,*authentication
Get-ECPvituraldirectory |fl identify,*url,*authentication
Thanks,
Angela Shi
TechNet Community Support

Free busy information not working in new exchange site.

HI,
We have central site Exchange 2010 setup and it working fine . For business requirement we Installed new Exchange server(Mail/CAS/HUB) in new site.
Post installed, Auto discover and mail flow are working fine but Free/busy information is not working for new site mailbox users(Not working in outlook and OWA also).
I am having a strange error coming from outlook. When I run "Test E-mail AutoConfiguration" in Outlook, it comes up with Protocol: Exchange Http "wrong server name"
Please share your suggestion to change/configure "correct server name" in "Protocol: Exchange HTTP"
Protocol: Exchange HTTP
Server: wrong server name
Login name: testuser
SSL: Yes
Mutual Authentication: Yes
Note : ( Protocol: Exchange RPC show correct server information and other Urls (OOF, OAB, OWA, Availability server).)

Hi will martin,
Thanks for your reply..
Yes , I already pointed internal web service virtual directory ( "https://casarrayname/EWS/Exchan...) to CAS server in new site. Other internal URLs (OWA,ECP,OOF,Availability service) also pointed to
new site CAS server.
But , when i check Auto discover internal URI and URL. below is the result.
Result 1
[PS] C:\Windows\system32>Get-AutodiscoverVirtualDirectory -Server Servername
Name
Server InternalUrl
Autodiscover (Default Web Site)
Servername
Result 2
[PS] C:\Windows\system32>Get-ClientAccessServer -Identity servername |fl *internaluri*
AutoDiscoverServiceInternalUri : https://casarrayname/Autodiscover/Autodiscover.xml
When i tried to set interurl using the below command and it completed with no error but still InterURL not reflect.
command : Set-AutodiscoverVirtualDirectory -InternalURL https://casarrayname/Autodiscover/Autodiscover.xml

Exchange 2013 not delivering mails to Exchange 2010

I am upgrading exchange 2010 to exchange 2013 and currently in coexistence. I cutover the mx to deliver mail to 2013 cas VIP last night and no mail was being received by the 2010 mailboxes, it was all being queued on the 2013 mailbox servers (mailbox
and cas servers are separate in this deployment.) There are only a few 2013 mailboxes as I have not yet started migrating them. These 2013 internal mailboxes can not send to exchange 2010 either, but 2010 can send to 2013. 2013 to 2013 mail works
fine. I have read somewhere about an issue with a receive connector having the same ip range that includes the mailbox servers, but I'm not clear on really which mailbox servers it is alluding to.
All the exchange 2010 servers are all on the 10.1.1.* network. Exchange 2013 CAS servers are all on the 10.1.1.* network and the 3 exchange mailbox servers are on 10.1.1.*, 10.1.2.* and 10.30.5.*. Only 1 AD site. On one of the 2010 receive
connectors there is a scope of 10.1.1.0/24 I'm wondering if this is the culprit and by removing it should fix the problem. Any other ideas would be appreciated.

Exchange 2013 users are unable to send emails to exchange 2010 users then check your connectors on Exchange 2013 Mailbox server. and yes if you have overlapping of scopes in different connectors then this can happen.
Kindly mark this as answer if found helpful. Thanks.
Regards, Riaz Javed Butt Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365

Iphone 5 and calender not working with Outlook Exchange, "Marriott"

I have a new iPhone 5. I have Outlook Exchange 2010 with Office 7. When I book airlines or car rentals both calenders sync the correct dates. When I book Marriott, I can make 4 differnet reservations and Outlook calender accpets the correct dates with my 4 resevations. The iPhone will only accpet one reservation in calender. Sometimes the date will be off by one day. I can paste the details in the calender and they appear ok but if US AIr works and Hetrz works why does Marriott not work?
Thanks, beachman220

Actually, as an update, mine is now working (the BlueTooth Audio part, Siri still cannot place calls).
I have done this on my first (now smashed) iPhone 5 and my new iPhone 5. It takes a lot of trial and error, but you can get it to work.
First thing is with the iPhone 4, all I had to do was connect the phone in the phone connect screen and it just worked for both. Not so with the 5. With the 5, I have to register it both in the Audo Settings> Bluetooth Audio Settings menus as well as the phone settings on the radio. I didnt know there were two different connections with two different pins. (0000 and 1212). I forget which one you have to connect first, but again, I tried it so many times both installs and it eventually worked. It may be easier to change the name of either the Phone or Bluetooh Audio name from Car Multimedia, so the iPhone can easily connect to one or the other, but I left them both with the same name. I can now play music, and when the phone rings, automatically swaps over to that one.
Play with it and you will get it to work. If I have time, i will remove it and do it again and write down the steps.

Cisco 5.0 "Your messages are not available now" after exchange 2010 and DC migration to a new host

Guys,
First of all, thanks for looking at this post. Hopefully you guys can help me out. My unity users, when dialing into voicemail are getting the message "Your messages are not available now".
Services in error state under the event viewer:
Event Type:   Error
Event Source:   CSAgent
Event Category:   Kernel Rule
Event ID:   256
Date:       7/29/2014
Time:       11:42:41 AM
User:       N/A
Computer:   UNITY
Description:
A packet with a bad transport layer header was detected. Reason: Illegal TCP reserved flags set using interface Wired\HP NC324i PCIe Dual Port Gigabit Server Adapter. TCP: 00.000.00.000/443->00.00.0.00/1241, flags 0x10. The operation was denied.
Event Type:   Error
Event Source:   CiscoUnity_MALEx
Event Category:   Error
Event ID:   30012
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation. The SysCheck utility may assist in diagnosing the problem.
Event Type:   Error
Event Source:   CiscoUnity_Doh
Event Category:   Error
Event ID:   32013
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
Doh logon failed due to messaging component logon error: 8004052eH
I found and followed to the letter:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/107323-unity-error.html
I also went ahead and ran GUSI with some mixed results under environment information:
SQL Version = Microsoft SQL Server 2000 - 8.00.2282: unknown SP
SQL Edition = Desktop Engine
Windows version = 5.2 Build 3790: Service Pack 2
Outlook is not installed on the local server
MAPI Provider : CDO Version - 6.5.8211.0
MAPI Shared Memory: (HKLM:SOFTWARE\Microsoft\Windows Messaging Subsystem\Applications\<process>\SharedMemMaxSize)
AvCsMgr : is set to recommended value
AvMsgStoreMonitorSvr : RegKey not found. Recommend add the key AvMsgStoreMonitorSvr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvNotifierMgr : RegKey not found. Recommend add the key AvNotifierMgr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvUMRSyncSvr : is set to recommended value
CsBMsgConnector : RegKey not found. Recommend add the key CsBMsgConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsBridgeConnector : RegKey not found. Recommend add the key CsBridgeConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsVpimConnector : RegKey not found. Recommend add the key CsVpimConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
TCPChimney : Disabled
RSS : Disabled
*Pulled from UnityDB Configuration Table*
ExcludeAllReceipts : 0
ExcludeReturnReceipts : 0
DisableSearchFolderUse : 0
MinSearchFolderLifeHours : 1
OptimizeSearchFolderUse : 0
I tried following and deleting the Unity System Profile:
https://supportforums.cisco.com/discussion/11249996/unity-501-exchange-2010-unable-logon-mapi-mailbox
But I am still scratching my head. Any direction will be appreciated.

Turns out that unity came back after all this. Maybe it just needed time. I think I answered my own question. Anyways, this post could serve for future reference.

Outlook 2007 cached mode not working for old exchange 2003 users

For some reason outlook isn't receiving emails straight away when in cached mode for users which we moved (few years ago) from exchange 2003 to 2007 (we now have everyone on exchange 2010). I checked the security tab in AD and compared new and old users
and the permissions are completely different.
Creating a new AD account and linking the old email account to it, fixes the issue but that's not really an option for over 100 users.
Has anyone else had this issue?

Hello,
What's the difference between the permissions?
Can the users receive emails from OWA?
In addition, please make sure your Outlook 2007 has installed the latest update. And try to use
outlook/cleanips and check if it helps. See:
http://support.microsoft.com/kb/968773/en-us
Best Regards,
Steve Fan
TechNet Community Support

My earpods are not working can I exchange them if I have a one year guarantee?

My earpods are not working. Can I exchange them if I have a one year guarantee? Please help!

You can get them replaced or repaired.

Mail 4.3 (OSX 10.6.4) not working properly with Exchange 2007

I'm trying to configure my mail client to access a corporate Exchange 2007 server. When I put in all the correct information, I get an immediate response that says the Exchange server is not responding on port 443. When I try a terminal session and telnet to port 443, it connects, so I'm pretty sure the path from my laptop -> the exchange server is functioning.
This same setup works fine on my iPhone.
The one oddity with the setup is the SSL certificate is a self signed one, and thus untrusted. I have told it to Connect when prompted, I have tried adding the cert to my keychain - neither option allows mail to connect.
If I VPN into my work, the setup and connection works without issue.d
This behavior is unique to mail as my iPhone works without any problems.
I'm wondering if the issue is mail trusting the certificate or if there is some other bug with self signed certs and mail.
Any suggestions?
Thanks,
-Mark

Could not connect to this Exchange 2007 Server. Check your network connection and that you entered the correct information in the Account preferences. Also verify that the server supports SSl. If it does not, deselect the "Use SSL" checkbox in the Advanced tab of Account preferences.
It does support SSL and it is selected - hence the dialog to accept the self signed certificate. I am able to telnet to port 443 to the site from an iTerm window so I am confident the server is up, running, accessible,...

Max is not working in infopath form 2010

Hi,
I have created one form in infopath 2010.
I want to get maximum id of a table when i click on new record.
I am trying to use max() function for the same.
But its not working for me.
Please help to solve the issue.
Thanks in advance!
Regards
Rajni

Hi,
According to your post, my understanding is that you want to get maximum item id of list in InfoPath 2010.
Here is a blog for your reference:
Auto-Numbering InfoPath Forms
http://claytoncobb.wordpress.com/2009/06/15/auto-numbering-infopath-forms/
Best Regards
Dennis Guo
TechNet Community Support

Certificate error on Outlook 2013 clients, Outlook 2007 clients do not get certificate error, Exchange 2010, dot local domain name

Hi
I'm looking for a solution that I can't seem to find. I have an Exchange 2010 server running in a dot local domain (domainname.local), so my SSL certificate is installed using the servers external email DNS name. email.mycompany.com
I have followed the instructions to resolve this on the Exchange server, implemented the changes so autodiscovery sees the server as email.mycompany.com. This works great for my Outlook 2007 users. The downside is that none of my Outlook 2013
clients can access their email without the certificate error server name mismatch.
I know Outlook 2013 has tighter security but I need to get rid of these cert errors, any thoughts out there?

Hi,
Since both your Outlook 2007 users and Outlook 2013 users are using Exchange 2010 with the same server configuration, it should be working in both Outlook client version.
Please restart your IIS service by running IISReset /noforce from a Command Prompt window in Exchange to have a try. In Outlook, please re-create a Outlook profile to check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

Push mail not working for Microsoft exchange in iphone5?

Hi,
got an iphone5 unlocked from apple..exchange email Push is not working, it is having problems. I have seen other posts where people complaint about the Push services in exchange? did anyone have any updates,etc on this problem? I am really disappointing never expected this from apple atleast. Now I am feeling I was much better on Adroid then ios6

User 487971,
If you're getting a message that the service isn't available, then something isn't right...well duh, right?
You don't say that whether you are the administrator. If not, I would double-check with them and make sure you have the correct address and port and that it is accepting connections.
Next, it may be that your server requires you to login, so that'd be another thing to look into.
Finally, something to keep in mind. As someone mentioned earlier, this board is mainly users answering in their own spare time. If something is "urgent", you'd probably be better to file a SR directly with Oracle.
Chad

Additional BIS Exchange account not working with BES Exchange

Hello all... I am having some trouble adding a new MS Exchange email account through BIS to my blackberry that already has an enterprise activation (eg BES) to a different Exchange account. When I create the Exchange setup in BIS, the device never receives any email or calendar events from that account. Synchronized items only list "deleted" and nothing else.
This used to work before my corporate mail was migrated from Lotus Notes. Previous setup had BES activation with some kind of Notes conduit and I added the BIS setup for a new exchange account with a different company. This worked fine until corporate mail was moved to Exchange and I had to wipe my device and reactivate with a new BES.
Now the BIS setup just will not work. The account is created fine. I do not get any login errors. It says the account was successfully added. The problem is that the only item listed under "Enabled Synchronization Options" is Deleted items with a green checkmark. No other items are listed like Inbox or Sent.
any ideas? Sorry if this has been answered before. I could not find this same situation in a previous post. I have been working on this for several weeks with no luck. Any help would be appreciated. thnx

That sounds like it is working as it should. BIS only supports the push of email in your inbox via OWA. It does not support calendar or contact sync Like the full BES experience.

DAG Concept not working in my Exchange 2010

Similar Messages

Maybe you are looking for