Dagii PKGBUILD, I need help again... :), problem with libpng

I'm stumped on what to do to get this to compile. It seems to compile without issue on Gentoo; I didn't see any patches in the ebuild. I receive this error when trying to compile Dagii:
make[1]: *** No rule to make target `/sw/include/libpng12/png.h', needed by `sshot.o'. Stop.
make[1]: Leaving directory `/home/arcade/pkgs/dagii/src/dagii-0.4/src'
make: *** [all] Error 2
Immediately I see it pointing to /sw/include/libpng12/png.h which is weird. The makefile has the include path as /usr/include/libpng12, so I don't know where this other path is coming from.
Here's the PKGBUILD, it's an easy one:
# Contributor: robb_force <[email protected]>
pkgname=dagii
pkgver=0.4
pkgrel=1
pkgdesc="Dave's AGI Interpreter is a re-implementation of Sierra's Adventure Game Interpreter that allows you to play games such as King's Quest and Space Quest."
url="http://www.dagii.org/"
license="GPL"
arch=('i686')
depends=('sdl>=1.2.9' 'libpng>=1.2.8')
makedepends=('zlib')
source=(http://www.dagii.org/dist/${pkgname}-${pkgver}.tar.gz)
build() {
cd ${startdir}/src/${pkgname}-${pkgver}
./configure --prefix=/usr
make || return 1
make DESTDIR=${startdir}/pkg install
Has anyone seen this error before?
Last edited by robb_force (2007-05-18 19:11:59)

Put this after your configure line, before make.
sed -i -e 's|/sw/|/usr/|g' src/depend.1
This will fix your issue but you'll run into another one.
Last edited by tardo (2007-05-26 17:51:03)

Similar Messages

  • I need help. Problems with ver, 10.2.152.32

    I am not very computer literate, so please be patient with me.  I will need step by step instructions - sorry.  While trying to play Zynga games - Farmtown & farmville, etc. I got a message to update my flash player if the games did not load in 10 sec.  Clicked on the link & downloaded flash player 10.2.152.32   I am still getting the message to upate, but when I updated it said it was completed.  I am not sure what to do now.  I did try uninstalling & reinstalling, but that didn't help either. I can send & receive gifts, and I can look at my neighbors, but not play the games.  Please help !!!  I have crops that are dying.  LOL
    Suzie

    From what I acn tell, I am using
    Windows 7, 64 bit, & Internet Explorer had my email wrong & had to re-register.  This is still Suzie.  Thanks

  • Urgent I need help about Problem with macbook pro

    The first sorry for my english,
    I have a macbook pro buy it me almost one year ago, and these days me the mouse remains I want and cannot do anything have to wait a few seconds and it returns to work, and also when it puts in rest it touched all the keys and the trackpad but it does not answer, I have to close the screen and wait awhile to raise it and return to react, if someone can help me it be be to him very grateful, in addition the guarantee of hardware is ended in 8 days. thank you very much

    Hi leptones, and welcome to Apple Discussions.
    I'm not sure if your warranty expires in 8 more days or it already expired 8 days ago? If you're still under warranty, I would definitely call AppleCare or go to an Apple Store or AASP; they can troubleshoot it and determine if it's something that needs fixing while you're still under warranty (if you are).

  • Need Help Troubleshooting Problem with Shared Internet Connection

    The setup:
    DSL Modem/Router
    Mac Running 10.4.4 connected to router directly, via ethernet cable
    Mac Running 10.2.8 connected to router wirelessly, via ethernet bridge
    The Mac connected by wire has no problems.
    The Mac connected by radio works perfectly with web browsers and with Apple software update, but it can't connect to the AIM server and it can't connect to the GMail POP server. It can connect to those servers via dial-up however.
    Any ideas on how to fix this?

    Could you list the make and model numbers of your dsl modem and your wireless bridge please?

  • Need help.Big problem with battery

    Hello all! I have HP Mini 110-3864sr for 3 years. I  rarely used the battery but if I do it , my notebook was working for 3-6 hours. 15 of August I left for business trip and  my HP stayed at home. When I came back on 22 of August, I switched it on, but I found that the battery doesn`t work at all. I have  Windows 7  and I see that the battery status is 0% and no  charging. I have done everything that I have found in the internet. I installed HP support assistant and did diagnostic from BIOS etc. Nothing helped, but HP support assistant says that the battery is OK. During  the test it starts charging for 15 sec and that is all. I suspect that when I left the battery was about 10% and during the  week It lost the power.
    I know that it must work because as I have said before it  cat run notebook for 3 hours +++. Please help what I have to do???
    This question was solved.
    View Solution.

    "I know that it must work because as I have said before it  cat run notebook for 3 hours +++. Please help what I have to do???"
    If you remove the battery and plug in the power adapter are you able to boot into Windows?
    If that is posssible, then your battery has most likely failed and requires replacement regardless of what the diagnostic test has told you.
    Notebook or netbook batteries are only guaranteed from new for one year. If you get three+ years of service life out of a notebook's battery, you can consider yourself quite fortunate.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • NEED HELP. Problem with Video iChat

    Hi there. I'm kind of new to the Mac world. I have a MacBook with Leopard. I seem to having a problem getting a video chat session up and running. I can iChat no problem but if I send a video chat invite the person gets it and accepts it but I receive an error message stating that i did not receive a response. The person that I'm sending the invite to is also on a MacBook using Tiger. I have a .Mac account and she does not. She is using her AIM account. I believe that she also received an error message about an invalid IP. Any suggestions?

    Same problem.
    But I can video chat with other people, this issue only affects 1 person, and they too can chat with other people, but when we try it fails with her seeing the IP error, I get a the other person didn't respond msg. Which just adds to the confusion. I used to be able to conference with her so this is a new error. Both video and voice only chats are affected, text chats still work.
    I'm on 10.5.1 on a G5 Mac Pro and she is on 10.4.x on an Intel MacBook Pro
    I can't be sure but it may have started after I upgraded to 10.5, but I also recently updated my Netgear (DG834G) firmware to V3.01.31. I've tried opening up various ports, checked everything that has been mentioned on here to date. The error is 100% reproducible with this specific person, and I can still conference with other people but I think they are all on 10.5.x

  • I need help : ( little problem with webcams

    yesterday buy webcams , and only on Skype got that problem :
    http://tinypic.com/view.php?pic=m81iyw&s=5
    on streaming program ( OBS - open broadcasting soft ) dont got that problem
    any got some answer what i must doing to repair that ?

    yesterday buy webcams , and only on Skype got that problem :
    http://tinypic.com/view.php?pic=m81iyw&s=5
    on streaming program ( OBS - open broadcasting soft ) dont got that problem
    any got some answer what i must doing to repair that ?

  • Need help troubleshooting problem with shadow images

    Has anyone encountered this problem and found a way to
    resolve it - I'm working in Captivate 2.
    I've created a training project that includes screens
    (slides) where popup windows appear. These popups mysteriously
    appear as faint images in a subsequent slide. The only connection
    I've been able to uncover so far is that recording the mouse click
    in the subsequent slide causes the popups from the previous slide
    to appear.
    Thank you - Info Design

    Could you list the make and model numbers of your dsl modem and your wireless bridge please?

  • Need help. Problems with word

    Microsoft Error Reporting log version: 2.0
    Error Signature:
    Exception: EXC_CRASH (SIGTRAP)
    Date/Time: 2013-12-03 22:18:01 +0000
    Application Name: Microsoft Word
    Application Bundle ID: com.microsoft.Word
    Application Signature: MSWD
    Application Version: 14.3.9.131030
    Crashed Module Name: merp
    Crashed Module Version: 2.2.4.131030
    Crashed Module Offset: 0x00004422
    Blame Module Name: Write-N-Cite Word 2011
    Blame Module Version: 4.2.891
    Blame Module Offset: 0x0003790f
    Application LCID: 3082
    Extra app info: Reg=en Loc=0x0c0a
    Crashed thread: 0

    You should contact Microsoft for Mac Support  and/or post in their forums.

  • TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

    I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
    Thor

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • News "FLASH"... Nancy O (the legend) ... i need help again

    I am trying to put a banner on my website for my exam.... It will have to have an image with logos flashing across and stopping for a few seconds before carrying on.and out the other side.  I have looked up everywhere to see how this is done but with no joy. There is lots of info out there but it is not working for me.  In Flash i have no problem creating a banner image with various logos moving  from one side to the other or even changing the image from one shape to another or bouncing it up and down the stage from one side to the other. I can even stagger the timelines for the logos to make them enter one after the other. The one thing i can not get to grips with is making the images stop or pause after they have entered from one side before exiting  the other side. I have followed step by step many  youtube tutorials but the authors are wizzing through them too fast and despite folling every step second by second, i  am missing a vital step somewhere.   Would someone please let me know step by  step (and please assume i am an idiot when doing this) the sequence i must follow from the very begining to the last step when i publish.

    Noooooooo........ When i saw your email notification i had high hopes of getting the answer i have been trying to work out for two days....but no problem ..your still a legend ha ha ... you got me out of a big hole in this project the last time... but thanks for taking the time to reply, i will try the other forum.
    Date: Thu, 26 Jan 2012 17:28:18 -0700
    From: [email protected]
    To: [email protected]
    Subject: News "FLASH"... Nancy O (the legend) ... i need help again
    Re: News "FLASH"... Nancy O (the legend) ... i need help again created by Nancy O. in Dreamweaver - View the full discussion
    You'll get better answers in the Flash Forums for whichever Action Script ver you're using.
    Sorry.  I don't do much Flashy stuff anymore.  As far as I'm concerned, when Apple iDevices quit supporting Flash, it became a dying web technology.  
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4167793#4167793
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4167793#4167793. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Dreamweaver by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Need Help again...

    Hi all...
    Really need help again this time...
    I am trying to do a web page and thought of placing 4 video
    clips into
    1 Loader...viewers can simply choose any of the videos they
    would like
    to watch...and all the video clips will then play in the same
    Loader on
    the exact X & Y values...Is it possible?
    eg. 4 Buttons with linking to 4 different video clips.
    When a video clip selected, play in a Loader of X and Y
    values.
    When another clip selected, play in the same Loader.
    Moca or anyone...please help me a.s.a.p...Thanks in
    advance...

    Does this happen to a wired computer or to a wireless computer? If it happens to a wireless computer ONLY but not to a wired computer, a firmware upgrade might not be necessary at all.
    Make sure your wireless settings are personalized, try using channel 11 and when you go to advanced wireless settings, try setting the beacon interval to 50 instead of 100.
    On how to do the things mentioned in the 2nd paragraph, open up IE and type on the address bar the numbers 192.168.1.1 (username leave it blank, password as a default is admin). Go the the Wireless tab.

  • Genius needs to help! problems with my video card and system

    Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
    MSI Neo2 LS 865PE.....MAT=Slow
    Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
    Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
    Radeon 9700NP.....stock speeds ~>1.7V
    AlienX case with 2 fan400 watt power supply and 6 case fans
    Zalman Alum/Copper heatsink fan
    1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
    I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
    I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
    2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007  with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
    I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.  
    I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory   ) but I'm not sure what to do at this point.
         I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
    I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.  
         I'm trying to get more info on how to run my system at a 5:4 ratio, also.  
    If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.  

    Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
    1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
    I returned the 3 KingMax I bought, and still keep my old stick just in case.
    2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
    3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
    4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
    Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
    MY 2.4C's FSB was raised to 250 = 3.0gig  
    AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
    CPU voltage: 1.5500
    Memory voltage: 2.75
    Video Card voltage: 1.7
         Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
         This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
    My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is?    I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
    A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333"

  • Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy

    I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
    Hi David (00)... Thanks for your reply. I just wanted to let you know
    that I am going to post all of this correspondence on as many Creative
    forums that I can find in hopes of finding someone that help with this
    problem.
    I will advise you of the results
    Thanks again...Bill Allen
    ----- Original Message -----
    From: "Creative Americas Customer Support"
    To: "Bill Allen"
    Sent: Saturday, February , 2006 :39 AM
    Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
    and Adobe Audition) (KMM987992I6636L0KM)
    > Sir,
    >
    > The only time that I've see a random tone being generated as you
    > decribe, it was necessary to update the system bios to correct.
    >
    > While we are able to playback and record with the card and it's included
    > software, Adobe continues to not allow you to monitor what you're
    > recording. As best we can tell, there's nothing wrong with the card and
    > I would urge you to check with Adobe for any "monitor recording"
    > switches that may be in their software.
    >
    > For faster service please reply with previous correspondence when
    > replying to this email.
    >
    > Best Regards
    > ,
    >
    > David (00)
    > Team Specialist
    >
    > Technical Support
    > Creative Labs Americas
    >
    >
    >
    > To provide feedback on your "Creative Experience" please click on the
    > following link:
    >
    Link removed
    >
    > This link is provided so that you may provide feedback on your "Creative
    > Experience". If you require further troubleshooting or have additional
    > questions simply reply to the original mail and we will be glad to
    > assist you.
    >
    > Original Message Follows:
    > ------------------------
    > Jeen... I appreciate, very much, your reply. But I don't appreciate
    > trying
    > to be 'ping ponged' back and forth between Creative and Adobe. While I
    > realize that you can only deduce a solution from what I tell you, I
    > believe
    > that if you re-read my description of the problem you will realize that
    > the
    > problem is with the sound card and it's associated software. Otherwise
    > why
    > would the system work as expected when it it turned on the next morning?
    >
    > I would also like to know where the 'tone' comes from. When recording
    > video segment (with audio) through the firewire connection of the
    > Creative Audidgy 2ZS card, after a short while the audio is replaced with a
    > constant tone (as I said, it is about 200 Hz). If I record the video thru the
    > Firewire connection and the audio through the 'Line-In' connection,
    > there is no problem with the recording the audio track 'tone free'. However,
    > sometimes but not always, when the audio is played back the tone will
    > appear. This has happened with both Adobe Premeire Pro .5 and Adobe
    > Audition. It is not in the audio track of Adobe Premeire Pro .5 or
    > Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
    > it's associated software. I'm sure your audio engineers have knowledge of
    > this problem and I would appreciate an answer.
    >
    > Thanks...Bill Allen
    >
    > ----- Original Message -----
    > From: "Creative Americas Customer Support"
    >
    > To: "Bill Allen"
    > Sent: Friday, February 0, 2006 2:5 AM
    > Subject: Re: Creative System Information (English : Adobe Premeire Pro
    > .5
    > and Adobe Audition) (KMM9780I6636L0KM)
    >
    >
    >> Dear Bill,
    >>
    >> Thank you for replying back to Creative Technical Support.
    >>
    >> With regards to your issue, I understand that you are having
    > difficulty
    >> getting the audio to record from the applications Adobe Premiere Pro
    > .5
    >> and therefore not sound during the playback.
    >>
    >> As you have verified that the sound card is working properly with the
    >> other applications on recording or playback, this could be due to the
    >> improper setup for the audio in the Premiere Pro .5.
    >>
    >> You may like to refer to Adobe for assistance on the configuration of
    >> the audio settings as we are not in a better position to advise you on
    >> third party software.
    >>
    >> Should you have not sound or issues with our software, please feel
    > free
    >> to contact us so that we can assist you.
    >>
    >> For faster service please reply with previous correspondence when
    >> replying to this email.
    >>
    >> Best Regards
    >> ,
    >>
    >> Jeen
    >> Technical Support
    >> Creative Labs Americas
    >>
    >>
    >>
    >> To provide feedback on your "Creative Experience" please click on the
    >> following link:
    >>
    Link removed
    >>
    >> This link is provided so that you may provide feedback on your
    > "Creative
    >> Experience". If you require further troubleshooting or have additional
    >> questions simply reply to the original mail and we will be glad to
    >> assist you.
    >>
    >> Original Message Follows:
    >> ------------------------
    >> Ronshone... Thanks for your reply.
    >>
    >> Here is the information you requested:
    >>
    >> Sound Blaster Audigy 2ZS
    >> PID: 0 03 50 00 00 00 02
    >> Driver Ver: 2.8.4
    >> Firmware : 0.0.0
    >> Model: SB.0350
    >> Serial Number: MSB0350472004288E
    >> Ink stamp: 50SPT470D
    >>
    >> The Audigy 2ZS is the only sound card installed
    >> The Audigy 2ZS card is at least one slot away from the graphics card.
    >> The Audigy 2ZS card is one slot away from another card.
    >> The Audigy 2ZS card is properly seated in the PCI slot.
    >> The PC's internal wires have been moved away from the Audigy 2ZS card
    > .
    >> The 'on-board' sound is disabled thru the BIOS.
    >> The 'on-board' game port is disabled thru the BIOS.
    >> The XP Pro operating system is up to date with all updates.
    >> There were no background operation going at the time of the tests.
    >> The anit-virus program was closed
    >> The CPU is not overclocked.
    >> And, I am the Administrator.
    >>
    >> The card came in a Creative retail Box along with the input unit that
    >> mounts
    >> in the dri've bay. I can't recall what that is called.
    >>
    >> I have relocated the sound card to a slot that is 4 slots away from
    > the
    >> graphics card and slot away from another card, in this case an
    >> additional
    >> IDE dri've controller.
    >>
    >> I have performed the test you outlined. I found that I had to record
    >> using
    >> the 'line in' source input. And I had to playback using the 'wave'
    >> source.
    >> As far as that test is concerned, everything worked. However when I
    >> bring
    >> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
    >> even
    >> though the audio meters in Premeire Pro in indicate that there is
    > audio
    >> playing from the audio track on playback, I hear nothing from the
    >> speakers.
    >>
    >> I then brought up the Creative Speaker Settings requester and did a
    >> diagnostic test. All tests indicated "pass". But when I click on the
    >> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
    >> should
    >> add that in both mixers, the Creative Surround Mixer and the Play
    >> Control
    >> mixer, all inputs and outputs are selected (not muted). Also when I
    >> performed this same test yesterday the 'Speaker Test' worked fine.
    >>
    >> On rebooting, the 'Windows XP' sound is heard from the speakers.
    >> Bringing
    >> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
    >> Test'
    >> in the Creative Surround Mixer also worked as expected.
    >>
    >> I then recorded the rest of my program using the Adobe Premeire Pro
    > .5
    >> 'Capture' requester and when I tried to playback from within Adobe
    >> Premeire
    >> Pro .5 all I got was a constant tone (about 200 Hz), even though the
    >> audio
    >> meters in Adobe Premeire Pro .5 indicated that the audio was good and
    >> had
    >> no constant tone.
    >>
    >> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
    >> program. Without making any changes to either mixers, Adobe Premeire
    > Pro
    >> .5
    >> performed, and the sound played, as expected. In the 'Play Control'
    >> mixer
    >> only the 'wave' was acti've. All the rest were muted. It was the same
    >> for
    >> the 'Creative Surround Mixer'.
    >>
    >> I am at a loss as to what the problem is. Any help would be
    >> appreciated.
    >>
    >> ...Bill Allen
    >> ----- Original Message -----
    >> From: "Creative Americas Customer Support"
    >> @customercare.creative.com
    >> To: "Bill Allen"
    >> Sent: Monday, February 06, 2006 9:42 PM
    >> Subject: Re: Creative System Information (English : Adobe Premeire Pro
    >> .5
    >> and Adobe Audition) (KMM933384I6636L0KM)
    >>
    >>
    >> Dear Bill,
    >>
    >> Thank you for contacting Creative Technical Support.
    >>
    >> With regards to the issue you are having, I would really appreciate it
    >> if you can provide me with the model number of the sound card. It
    >> should
    >> start with CT or SB followed by 4 numbers found on the sound card. I
    >> also need the serial number which can be found on the sticker and the
    >> ink stamp which is printed on the back of the card. This number will
    >> not
    >> be located on any of the stickers and it will not be labeled. It is a
    >> number that has been stamped on the card itself, possibly near the
    >> outer
    >> edge of the card to determine the best advice for you.
    >>
    >> Did the sound card come pre-installed in the PC, comes in a plastic
    >> cover or brown box or did it come in a Creative retail box package?
    >>
    >> Below is a link that may help with the location of the model number.
    >>
    >> Run a keyword search for SID2456 from the link below.
    >>
    Link removed
    >>
    >> I also need you to try the following recording test.
    >>
    >> SELECT THE RECORDING SOURCE IN SURROUND MIXER
    >> . Go to Start Programs Creative SB Audigy Surround Mixer
    >> 2. Click on the Recording Source (should be on the right side of the
    >> mixer under the REC label)
    >> 3. Change the recording source to Analog Mix
    >> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
    >> speaker) that you don't want recorded with the audio stream.
    >> 5. You may wish to select "record without monitoring" by click on the
    >> (+) above the Analog Mix recording source. This keeps the source from
    >> playing out to speakers while recording
    >>
    >> TEST RECORD THE AUDIO
    >> . Go to Start Programs Accessories Multimedia Sound Recorder.
    >> 2. Click the Record button (red dot)
    >> 3. Talk into the microphone
    >> 4. Let it record the source for a little bit
    >> 5. Hit the Stop button (black square)
    >> 6. Hit the play button (single arrow pointing right)
    >> 7. You should now hear the audio that you recorded.
    >>
    >> If you are still having issues, I recommend you to ensure the
    > following
    >> for the audio installation and test:
    >>
    >> - The card is the only card installed other than the Graphics card.
    >> - The card is at least one empty slot away from the Graphics card.
    >> - Place the soundcard away from all the others.
    >> - That the card is seated properly in the PCI slot.
    >> - Move the PC's internal wires away from the soundcard.
    >> - That the on-board sound on your motherboard is disabled through the
    >> BIOS.
    >> - That the on-board gameport is disabled through the BIOS.
    >> - That your motherboard BIOS is up-to-date.
    >> - That the operating system is up-to-date with the latest service
    > packs
    >> and patches.
    >> - That there are no background applications open when you attempt the
    >> solution.
    >> - That the anti-virus program is disabled.
    >> - That if you are over-clocking your system, return all options to
    >> their
    >> recommended settings.
    >> - That you access the PC with administrator rights.
    >>
    >> Do reply back to me if you are still having problems with any error
    >> messages prompted. Thanks.
    >>
    >> For faster service please reply with previous correspondence when
    >> replying to this email.
    >>
    >> Best Regards
    >> ,
    >>
    >> Ronshone
    >> Technical Support
    >> Creative Labs Americas
    >>
    >>
    >>
    >> To provide feedback on your "Creative Experience" please click on the
    >> following link:
    >>
    Link removed
    >>
    >> This link is provided so that you may provide feedback on your
    >> "Creative
    >> Experience". If you require further troubleshooting or have additional
    >> questions simply reply to the original mail and we will be glad to
    >> assist you.
    >>
    >> Original Message Follows:
    >> ------------------------
    >> User Detail
    >> ----------------------------------------
    >> Name : Bill Allen
    >> Email Address : [email protected]
    >> Self Description : Intermediate PC User
    >>
    >> Creative Product Information
    >> ----------------------------------------
    >>
    >> Problem Type : I need help with a third-party software application
    >>
    >> Problem lies with:
    >> ----------------------------------------
    >> Adobe Premeire Pro .5 and Adobe Audition
    >>
    >> Customer's System Specification
    >> ----------------------------------------
    >>
    >>
    >> Detailed Problem Description
    >> ----------------------------------------
    >> I can hear sound from my computers speakers. The diagnostic tests
    >> performed by the Creative software are all "OK", but I cannot record
    >> audio with either of the two programs mentioned above. I have checked
    >> everything I can think of and all of the settings appear to be "OK".
    > I
    >> have also updated the driver for the sound card. What can I do?
    >>
    >> Attachment :
    >> [ Attachment Type: application/octet-stream Name: CTSi.cab]

    TeamRacing6 wrote:
     b noir,
    I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
    I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
    Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

  • Help please problem with export

    I had some problems with safari on my imac (OS X) so I did some "repairs" I ended up deleting some keychains and I believe that is what cause the problem I'm having. However I don't know how to fix it.
    When I try to export RAW images from my Lacie rugged external hard drive to the desktop into jpg I get this error...
    "An internal error has occurred: ?:0: attempt to index field 'rootFile' (a nil value)"
    I have a deadline very soon (in about an hour) and need help please.

    Fantastic, these things always happen at the most inconvenient time!!!
    When you've got the job out of the way reboot the Mac and try the export to desktop again. If it is still broken then in Disk Utility run Repair Permissions on the Mac and La Cie.
    Who do I send the bill to???

Maybe you are looking for

  • Div tag issue

    Hi all, Still fairly green. I have a question about float and divs. I have 2 divs next to each other, both float left. Both filled with different colors. As the Div on the left expands VERTICALLY with copy... I want the one on the right to ALSO expan

  • Safari 3.1.2 using 98% CPU

    Hello, Safari is using 98% CPU..Any ideas here as I close then reopen it and it then uses just 10%. Cheers

  • Debugging a slow firefox

    Lately I have noticed my web connection is really slow. I always use firefox and had assumed the problem to be with my router or ISP. However I just started doing some stuff in parallels, and realised the response of the firefox browser from within w

  • How can save the lessons as a pdf?

    how can I save the lessons as a pdf? Or save the video for offline?

  • List of application engines that a delivered app engine touches

    Hi everybody, Can any one please tell me is there any documentation to get all the application engines that were touched by a delivered application engine. For example. the AP_VCHRBLD will call the app engine APVEDTPRRT and a lot other app engines. I