Daily Customer Balances in Local Currency problem?

Hi,
My user want S_ALR_87012172 - Customer Balances in Local Currency on daily basis but can you suggest me what shall I do?
I have tried to write a query but I hope I am not getting all the tables can yiu suggest me tables where I can get the balance in local currency for customers and accumulated balance as well.
Please suggest any way like report painter or query step by step?
Regards
Nitin

Thanks alot Visawana S,
I am sorry but are those tables enough to meet this requirement.
I am making a query for Daily customer report in which my user want fields Total Debit posting, Total Credit Posting, Balance Carryforward and Accumulated balance based on the selection of Posting date. When I am trying to do that I am unable to find all the tables for this report as we have the field Balance carryforward in KNC1 or KNC3 but when we join the tables it doesn't show any link. Please help me on it. Also, I am unable to find out the Accumulated balance field in any table if we don;t have that field then how to get that field updated.
Please write about the tables in detail.
Thanks in advance
Regards
Nitin

Similar Messages

Dynamic field in S_ALR_87012172 - Customer Balances in Local Currency?

Hi,
My problem is that we want to add the document Numnber field in the report S_ALR_87012172 - Customer Balances in Local Currency so that we can get the desired output. I have tried to add the Document number field under 'Documents' in the Dynamic Selection using table BSID. When we are adding it it is working fine for all other reports for customer balances but not showing anything here.
Please tell me the reason why it is happening if possible and tell me how to get that field added.
Please reply asap as it is quite urgent.
Thanks in advance
Regards
Pankaj

Thanks again Ravi,
I have tried that option and made the Form and Report but when I am trying to Excute the report S_ALR_87012172 - Customer Balances in Local Currency it is not coming with the desired output. Is it the link problem. Can you plz tell me we have made a form and then a report with the desired parameters but how to link that report with the desired T. Code.
Secondly, if I make the changes in the Standard reports which are mentioned below then system is taking the changes but when I am making the new form and report myself then system is giviing me the desired output. Can we make our own report and link it to the T. code we want or we only can make the changes in the standard reports .
0SAPFD10-01     Transaction Figures: Account Balance
0SAPFD10-02     Transaction Figures: Special Sales
0SAPFD10-03     Transaction Figures: Sales
Please help me as I don;t know much about the report painter.
Thanks in advance..
Regards
Pankaj

Customer Balances in Local currency

Hi Gurus,
Can some one explain me about
TCode- S_ALR_87012172= Customer balance in Local currency
It importance ,its benefits,
Thanks,
Seegal

Hi,
Check the program documentation(shift +F1), blue i icon in application menu after executing the T.code.
Short text
Customer Balances in Local Currency
Description
The balances from the following transactions can be issued with the customer balance list:
Standard G/L transactions
Special G/L transactions (per special G/L indicator)
The following figures (for a particular month only) are displayed in local currency:
Balance at period start ( balance carried forward and balance of the periods before the reporting periods)
Debit total for the reporting period
Credit total for the reporting period
Debit or credit balances for the whole period
The following data is issued at the end of the list for each local currency:
Totals per company code
Final total across all company codes
Output and Sort Sequence
You can choose from two sort sequences for the accounts. Sort sequence "1" uses the reconciliation account as the sort criteria whereas sort sequence "2" uses the account number.
With both of these sort sequences you can choose between a standard version and a corporate group version. In the standard version, the accounts are listed per company code. In the corporate group version the company codes are listed per account.
You can use the "Summarization level" parameter to specify whether the data is to be issued in detailed or summarized form.
The following overview shows the relation between
The account sort sequences
The standard or corporate group versions
The summarization levels
Account sort sequence 1 - standard version
Data sorted by:
Company code
Reconciliation account
Account number
Summarization levels:
0 = No summarization (total per open item account)
1 = Summarization of the open item accounts (total per reconciliation                                                account)
2 = Summarization of the reconciliation accounts (total per company code)
3 = End totals sheet only (totals across all company codes)
Account sort sequence 1 - corporate group version
Data sorted by:
Reconciliation account
Account number
Company code currency key
Company code
Summarization levels:
0 = No summarization (total per company code)
1 = Summarization of company codes (total per currency key)
2 = Summarization of open item accounts (total per reconciliation                                           account)
3 = End totals sheet only (totals across all company codes)
Account sort sequence 2 - standard version
Data sorted by:
Company code
Account number
Summarization levels
0 = No summarization (total per open item account)
1 = Summarization of open item accounts (total per company code)
2 = End totals sheet only (totals across all company codes)
Account sort sequence 2 - corporate group version
Data sorted by:
Account number
Currency key
Company code
Summarization levels
0 = No summarization (total per company code)
1 = Summarization of the company codes (total per currency key)
2 = End totals sheet only (totals across all company codes)
Recording data on microfiche
You can request information for recording on microfiche. The fixed part of the microfiche information is documented under the parameter for it. The variable part, i.e. the report-specific part, has the following structure:
In the standard version:
Company code                 4 characters
Reconciliation account      10 characters (only with sort sequence 1)
Account number              10 characters
In the corporate group version:
Reconciliation account      10 characters (only with sort sequence 1)
Account number              10 characters
Currency key                 5 characters
Company code                 4 characters
Regards,
Raj

S_ALR_87012172 - Customer Balances in Local Currency

Dear All
I want insert some field in sap enhancement for S_ALR_87012172 - Customer Balances in Local Currency. If have any enhancement. Please advise.
Regards
Avijit

Hi,
Please verify the documents..............
http://help.sap.com/bp_blv1600/BL_US/Documentation/Scenarios/V4G_IMPL_EN_US.doc
Regards
udayakumar.k

Vendor + customer balances in foreign currency

Hi all,
We need 2 reports which are is pretty similar to the following both:
1.)Vendor balances in local currency
Transaction:
S_ALR_87012082
2.)Customer balances in local currency
Transaction:
S_ALR_87012172
The only difference should be, that the 2 reports should show the balances in <b>foreign currency</b>.
Are there any standard-reports or functions available for our problem?
Thank you and best regards,
Stefan

Hi,
i'd use 2 fm's:
1) READ_LFC1 / read_knc1
2) CONVERT_TO_FOREIGN_CURRENCY
or use bapis:
BAPI_AP_ACC_GETPERIODBALANCES
BAPI_AR_ACC_GETPERIODBALANCES
@Rob,
i don't get your answer!?
reports RFDSLD00 / RFKSLD00 are in local curr.
Andreas

How to get Daily Customer Balance Report?

Hi
I have received a requirement from the user where he has to send the Daily Customer balance report currently he is using the T.Code S_ALR_87012172 Customer Balances in Local Currency for fetching the monthly data.
I want to know what are the ways to make the report and what is the best way out of them to do it. Can it be done through user Exit, BADI, query or we have to get the Z report made by the apaber.
Also, if it is possible please tell me the way step by step for user exit, badi or query if that is to be used.
Please help
Thanks in advance
Pankaj

Thanks for your reply Aleksey...
We are using the report S_ALR_87012172 - Customer Balances in Local Currency and user want the same report on daily basis like Total Debit/Credit, Balance carryforward and the Accumulated balance. I have checked but unable to find out any such output.
Please suggest what to do whether to make chnges in report painter or have to write a query. If I write a query then plz suggest me the tables as I am trying to do that but unable to link the Balance carryforward and accumulated balance.
Regards
Pankaj

Difference in the Balance between FS10N and Customer Balances in Local Curr

Hi,
When i am trying to match the Balances between FS10N and Customer Balances in Local Currency for the Period 8, we are getting the difference, The reconcilliaton Account was changed on 30.08.2010.
Please help Us in tracing the differences between FS10N and Customer Balances in Local Currency.
What could be the possible reasons for the differences..
Thanks

Hi Varshani,
Please use the program/report SAPF070 to compare or reconcile your AR with GL balances. You can use SAPF071 to correct any inconsistencies. Provided below documentation for these programs.
SAPF070 - Compare Documents and Account Transaction Figures
Description
This program compares debit and credit transaction figures in customer, vendor, and G/L accounts with the debit and credit totals from documents posted in the corresponding posting period (accounting reconciliation). The sales totals are also compared for customer and vendor accounts. There is no separate comparison for special G/L transactions.
A comparison for G/L accounts can be made in company code currency and in parallel currencies (such as group currency). A comparison for customer and vendor accounts can only be made in company code currency.
After the program has finished, a message is issued to the user that started the program. This message summarizes the results of the reconciliation.
Output
The program compares the totals of an account on a periodic basis. If the debit and credit total differs between account and documents, the account is printed with the debit and credit totals and the difference.
Differences in G/L accounts are shown per transaction currency. The first line shows the amount in local currency, the second line shows the amounts in transaction currency.
If a document which falls within the selection range is posted during the program run, the program is terminated since a reliable result can no longer be delivered.
SAPF071 - Adjust Balances after Comparing Documents/Transaction Figures
Description
If a financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) shows that there are differences between documents and transaction figures, you can use this program to make an adjustment. The documents form the basis for this adjustment. The program adjusts the (redundant) transaction figures, which are only totals of amounts from documents.
Requirements
All of the following listed requirements must be fulfilled:
1. A financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) must be made, and differences must be found between documents and transaction figures.
2. There must not be any inconsistent documents found. These are listed in both SAPF070 and SAPF190 as well as in this program.
3. There cannot be any problems in the other modules. Caution: You have to check this yourself. Financial Accounting may be correct but the other modules may not be, and this will adversely affect the program run.
4. You can only make the adjustment in the ledgers which are compared by program SAPF070. This is ledger 00 or a user-defined ledger for all parallel local currencies except the group currency. (The program displays these ledgers). You have to adjust any additional ledgers as well as average balance ledgers yourself.
5. No documents during the period in which you are adjusting transaction figures can be archived. Caution: You must ensure that these documents are not archived by establishing appropriate organizational rules and procedures.
Only use this program after consulting with SAP or after checking the prerequisites thoroughly.
You should adjust all differences together for a single company code. By setting the program parameters you can limit the adjustment to G/L currency types or to balances in subledgers.
It is advisable to execute a test run first, which will list any differences that are found.
Further notes - Authorizations
Repair program authorization group (F_005)
Company code authorization (F_BKPF_BUK)
Thanks
Venkata Ganesh Perumalla
Edited by: Venkata Ganesh Perumalla on Sep 28, 2010 1:30 PM

F5061 Balance in local currency EUR is too large for automatic adjustment

My Company code currency is EUR. The customer has made a downpayment in USD (say 100) and i am now to clear the same against invoice of same amount in USD (100 $) but its is resulting into minor differences in Local currency. I am getting the following error
Balance in local currency EUR is too large for automatic adjustment
Message no. F5061
Diagnosis
For postings in foreign currency, it is possible that the balance in foreign currency is zero, but not in local currency. Providing the balance in local currency does not amount to more currency units than the document has line items, the system adjusts the amounts automatically. If an automatic adjustment is not possible, the amounts must be adjusted manually in local currency.
System Response
The document is not posted in local currency without adjusting the amounts.
Procedure
Adjust the amounts in local currency.
How can i have the system automatically fetch the Gl accounts to post the exchange rate differeces.
I have maintained the settings in FBKP- Exchange rate differenes
Thanks & Regards
Pooja

Hi,
I have the same problem; my company code is defined in HUF and I am trying to post a vendor invoice in Euros.
I have a 10% maintained there and still receiving the error, either for differences of just one HUF. The strangest thing is that differences are automatically adjusted (also for discrepancies over the 10%) when posting through FB60 but not when using FB01.
Any idea?
Thanks in advance for your input.
Best regards.

Only Balances in local currency

Hi,
By mistake we activated only Balances in local currency setting for a GL account at the time of Go-live. Also we had done postings to this account with foreign currency and local currency. Now we want to do foreign currency valuation for this account, but the problem is up to now all the transaction are recorded in local currency only because of the reported setting to GL master, so system is not finding any valuation differences for foreign currency transactions.
What can be done to update the transaction currency balances for the posted line items without reversing?
Is there any program to update the balances in transaction currency as well?
We have many line items in that GL account which have to be revaluated.
Experts, please give me the suggestion.
Rgds
Murali. N

Hi,
Please check the below OSS notes:-
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1431450]
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=327591]
Regards,
SDNer

Only balance in local currency

Hi
our base currency is UDS. One of the GL ( bank account in Germany ) is set up as document currency ( euro ) and " only in local currency " check box is unchecked ( FS00 , control tab ). Now when I try to load the plan data into system, all the values goes well except this GL. I used manual entry to load the value (Gp12 ) into this GL (plan ).It did not work.
Now I tried to change the check box ( FS00 ) but it does not allow as there is balance into that. First I am not clear why this one account was set up like that.Can anybody suggest me how to fix this "only local currency" issue.
Thanks
Satya

Hi Satya,
Since you have created the g/l account with account currency EUR and which is different from your company code currency (USD) it will only accept the postings in EUR. If an account is set up in company code currency then it will accept postings in all currencies. Usually bank accounts are maintained in currencies other than company code currency and in this case I am not sure why you have created a P&L account in currency other than Company code currency.
The indicator "Only balances in local currency" controls the display of balances via FS10N transaction and if you have unchecked that indicator then system should supposedly display the balances by transaction currency but in your case since, your account currency is EUR and the g/l account can only accept postings in EUR it doesnt really matter because it will only display balances in EUR since all the postings going to the above account will be only EUR.
As far as ur problem is concerned; looks like u r loading numbers in currency other than EUR and that is why it is bombing out. You have to zero out the balance in the account first and then have to change the account currency to USD if you want to plan in diff currencies on that account.
Plz assign points if useful
Thanks
Kumar

GL account char - XSALH "Indicator:Only Manage Balances in Local Currency"

Hello experts,
Regarding transaction FS00 or FSS0, i would like someone to give me a clear view of the utility of value field XSALH "Indicator: Only Manage Balances in Local Currency".
When creating a GL account, from a technical perpestice, in which case i should activate this flag and in which case i should not activate it ?
What are the different impact for the user, except the fact that balances are updated only in local currency ?
Thanks in advance,
Nicolas GORECKI

Hi
If the indicator Only Balances in Local Currency is selected in the master record, transactions figures are only managed for amounts translated into local currency.
You should select this field for clearing accounts where you want to clear accounts by assigning items with the same local currency amount with one another, without necessitating exdchange rate difference postings.
The indicator must be set in cash discount and GR/IR clearing accounts. This should not be activated for Reconciliation accounts for customer and vendors.
This indicator is usually set in balance sheet accounts that are not managed in foreign currencies.
IF this indicator is not set, to clear the open items, both the local and foreign currency amounts of the items to be clared must match. In such a case, it may be required to post an exchange rate difference postings.

Enabling "Only balance in local currency" for GL's

Guru's
Can any one help me on this.
We wanted to enable bhe "Only balance in local currecy" for certain GL's. The GL's already has some balance.
We have an option to make the balance zero by using a clearing account and trasfer it back once it is enables. But our problem is.
a. We are not sure whether these changes will have retrospective effect - that mean will it effect all the entry booked when it was not enabled.
Please advise
Deepak

Deepak,
a)first you can make the balaces 0 of the g/l accounts to which accounts u want uable the field only balances in local currency.
b)goto OBD4 and select account groups of that g/l accounts and suppress that only balance local currency field.
Reward points.
Regards,
Rams

Clear balance in local currency

Dear all,
I hope you can help me with following issue.
I'm trying to clear 2 documents via F-03
The 2 documents have a balance in local currency of 0 (zero). Normally it should be possible to clear these 2 documents.
The problem however is that in the GL master record "only balances in local currency" was not flagged when the postings were done. I think that even the balances in local currency net to zero there is now a balance in foreign currency.
Any idea's on how I can clear the balance in local currency?
Thanks a lot

Checking the checkbox "No forex rate diff. when clearing in LC" for your company code in T Code OBY6 could resolve your issue probably.

Customer balances in Group Currency

Is there any way to get the Customer balances in Group currency - I am running TC S_ALR_87012172 for a UK Company Code. This TC provides me balances and details in GBP only and does not provide the option to get my USD balances. Is there any other transaction which would allow me to get the same type of report but in both LC and Group currency or at least only on GC? Same goes for TC S_ALR_87012082 for the payables side.

Hi
Can you try to edit the fields in layout in same t-code , also you can try to check the report in t-code: FBL5N if group currency filed is not avalible.

F.05 and "only balance in local currency"

Hi Dear,my client like to do F.05 (foreign curreny valuation) for all balance sheet account,but if you select "only balance in local currency" in GL master,then those GL accounts can not be picked up for F.05.
SAP's suggestion is :
*For normal balance sheet accounts that record neither items in foreign currency nor open items, SAP recommends that you record the account transaction figures in local currency only. You should select the "Only balances in local curr." checkbox to do this*
But if i want do f.05 for all balance sheet account,i should not select "only balance in local currency" in GL master,am i right?

Hi,if you want do so then do. But do realy going to book all accounts in foreign currency???

Daily Customer Balances in Local Currency problem?

Similar Messages

Maybe you are looking for